Active source seismic imaging on near-surface granite body:case study of siting a geological disposal repository for high-level radioactive nuclear waste

In order to research whether it is suitable to set a geological disposal repository for high-level radioactive nuclear waste into one target granite body,two active source seismic profles were arranged near a small town named Tamusu,Western China.The study area is with complex surface conditions,thus the seismic exploration encountered a variettraveltimey of technical difculties such as crossing obstacles,de-noising harmful scattered waves,and building complex near-surface velocity models.In order to address those problems,techniques including cross-obstacle seismic geometry design,angle-domain harmful scattered noise removal,and an acoustic wave equation-based inversion method jointly utilizing both the and waveform of frst arrival waves were adopted.The fnal seismic images clearly exhibit the target rock’s unconformable contact boundary and its top interface beneath the sedimentary and weathered layers.On this basis,it could be confrmed that the target rock is not thin or has been transported by geological process from somewhere else,but a native and massive rock.There are a few small size fractures whose space distribution could be revealed by seismic images within the rock.The fractures should be kept away.Based on current research,it could be considered that active source seismic exploration is demanded during the sitting process of the geological disposal repository for nuclear waste.The seismic acquisition and processing techniques proposed in the present paper would ofer a good reference value for similar researches in the future.

Semiannual velocity variations around the 2008 M_w 7.9 Wenchuan Earthquake fault zone revealed by ambient noise and ACROSS active source data

We continuously monitor the long-term seismic velocity variation of one of the major ruptured faults of the devastating 2008 Mw7.9 Wenchuan earthquake in China from July 2009 to January 2012,jointly using accurately controlled routinely operated signal system active source and seismic noise-based monitoring technique.Our measurements show that the temporal velocity change is not homogeneous and highly localized in the damaged fault zone and the adjacent areas.Velocity variations from the active and passive methods are quite consistent,which both are characterized by ±0.2 % seasonal variation,with peak and trough at winter and summer,respectively.The periodic velocity variation within fault zone exhibits remarkably positive correlation with barometric pressure with stress sensitivity in the order of 10-6Pa-1,suggesting that the plausible mechanism might be the crack density variation of the shallow subsurface medium of the damaged fault zone in response to the cyclic barometric pressure loading.

The Construction of Active Source Repeated Monitoring in the Qilian Mountain, Gansu Province

The exciting source of the active source repeated monitoring is located in the Xiliushui Reservoir in Zhangye,Gansu Province. The system began operating normally on July 9,2015,and we had completed a period of 40 days of continuous excitation experiment before November 10,2015. Our results reveal that the airgun source has good consistency and repeatability,and the detective system of active source can record signal clearly. The construction of active source repeated exploration projects has achieved some results,which can provide valuable experience for the research of active source repeated exploration. The observation data we obtained makes it possible to follow the temporal and spatial variations of the deep structure of the Qilian Mountain areas.

Preface to the Special Issue on Advances in Seismic Exploration and Monitoring with Active Sources in China

Analyzing the information carriede by seismic waves is a major means for human beings to have an insight into the structure of the earth’s interior,and by using artificial seismic sources to excite seismic waves,we can obtain high-resolution images for the crustal and smaller scale medium.Artificial seismic exploration methods have been widely applied to fields such as

Active Source Tomography in Northwestern Xinjiang,China:Implication for Mineral Distribution

The main aim of this work is to understand the distribution of minerals by obtaining a shallow velocity structure around the Karatungk（喀拉通克） region.Data were acquired in 2009 by a denser array in deploying a transportable seismometer with 4.5 Hz vertical geophone.All the P-wave arrival times are picked automatically with Akaike information criterion,and then checked man-machine interactively by short-receiver geometry.The database for local active-source tomographic in-version involves 4 241 P-wave arrival time readings from 96 shots and three quarry blasts.Checker-board tests aimed at checking the reliability of the obtained velocity models are presented.The result-ing Vp distribution slices show a complicated 3-D structure beneath this area and offer a better under-standing of three well-defined mineral deposits.Near the surface we observe a series of zones with slightly high-velocity which probably reflect potential deposits.Based on features of metallic ores we attempt to delimit their distributions and stretched directions.

Measuring Acoustic Wave Transit Time in Furnace Based on Active Acoustic Source Signal

Accurate measurement of transit time for acoustic wave between two sensors installed on two sides of a furnace is a key to implementing the temperature field measurement technique based on acoustical method. A new method for measuring transit time of acoustic wave based on active acoustic source signal is proposed in this paper, which includes the followings： the time when the acoustic source signal arrives at the two sensors is measured first; then, the difference of two arriving time arguments is computed, thereby we get the transit time of the acoustic wave between two sensors installed on the two sides of the furnace. Avoiding the restriction on acoustic source signal and background noise, the new method can get the transit time of acoustic wave with higher precision and stronger ability of resisting noise interference.

Recharging method of active medical implant using wearable incoherent light source

A new method for recharging active medical implant（AMI）in vitro based on incoherent light source and results of the simulation experiments are proposed.Firstly,the models of the AMI recharging method based on incoherent light source in vitro are developed,which include the models of an incoherent light source and skin tissue.Secondly,simulation experiments of the incoherent light source of the AMI recharging process in vitro based on the Monte Carlo（MC）method are carried out.Finally,absorbed fractions of different layers and distributions of density along x axis of the tissue model and other important conclusions have been achieved.

Drift Control Technology Using Wire-Suspension for the Airgun Source Platform in Qilian Mountain

There are several key issues in dynamic monitoring of subsurface structures,such as signal-to-noise ratio( SNR),repeatability of seismic sources and accurate measurement of velocity. Using a large volume airgun source,we constructed a high-performance active system which mainly consists of airgun excitation and signal reception. In order to reduce the platform drift from the shot position,we put forward the platform drift control technique. Experimental results show that the technique can effectively solve the problem of platform drift from the set position under fluid impact after airgun excitation. The results of this study can be a reference for repeated airgun source detection at certain excitation sites.

The Source and Observation System of Binchuan Earthquake Signal Transmitting Seismic Station and Its Preliminary Observation Results

This paper summarizes the basic situation of the Binchuan Transmitting Seismic Station and the geophysical observations of the area where it is located,with a focus on the constitution of the observation system of the transmitting seismic station,the excitation characteristics and propagation distance of signals excited by the airgun source in the reservoir and well. The paper also summarizes and discusses on the results of the observations and problems encountered since the Transmitting Seismic Station was built.Finally,this paper proposes the main research to be carried out on the basis of the project aims.

A new approach to numerical simulation of source development of earthquake

By considering the heterogeneity of geomechanical materials, the source development of earthquake under compression boundary conditions is studied with a newly developed numerical method, Rock Failure Process Analysis code (RFPA2D). The process of fault forming and associated micro seismicities in a rectangle area with a inclusion but without any clear structural features of original fault is modeled. The modeling demonstrates the whole process of source development of earthquake from deformation, micro failure to collapse and the behavior of temporal spatial distribution of micro seismicities. The stress, strain and the temporal spatial distribution of micro seismicities vividly depict the phenomena of localization, temporal transitions, dilatation or rise, elastic rebound and conjugate (X type) deformation zone.

The K Method for Estimating Earthquake Activity Parameters and Effect of the Boundary Uncertainty of the Source Region:Discussion on the Seismic Zoning Method

Two aspects of a new method,which can be used for seismic zoning,are introduced in this paper.On the one hand,the approach to estimate b value and annual activity rate proposed by Kijko and Sellevoll needs to use the earthquake catalogue.The existing earthquake catalogue contains both historical and recent instrumental data sets and it is inadequate to use only one part.Combining the large number of historical events with recent complete records and taking the magnitude uncertainty into account,Kijko’s method gives the maximum likelihood estimation of b value and annual activity rate,which might be more realistic.On the other hand,this method considers the source zone boundary uncertainty in seismic hazard analysis,which means the earthquake activity rate across a boundary of a source zone changes smoothly instead of abruptly and avoids too large a gradient in the calculated results.

Upper Crustal Velocity Structure along the Yangtze River from Ma'anshan to Anqing

We applied the 3D first arrival travel time tomography method to the Anhui active seismic source experiment data,and obtained the imaging of the upper crust velocity structure beneath the Yangtze River from Ma'anshan,Tongling to Anqing. Data fitting reveals the tomographic model fits the data with uncertainties, without overfitting, and with a minimum of complexity. The tomographic result shows an obvious heterogeneous upper crust which consists of a series of uplifts and depression basins. The velocity model and region imply that this region has experienced crustal uplift and extensional tectonism with concomitant magmatism since the Cenozoic.

Multi-frequency VLBI Observations of NRAO 150

We present multi-frequency, high resolution, radio structures of NRAO 150 with VLBA and EVN array respectively, both of which show a very collimated one-sided jet structure beyond an angular distance of 80 mas. Model fitting is performed for observations at 2.3 GHz and 8.4 GHz which reveal the source to be consisting of several components at position angle -30°. According to the light curves at 4.8 GHz, 8.0 GHz and 14.5 GHz an outburst is currently occurring in its rising stage, which suggests that a new component is probably in the course of forming. Spectral analysis reveals that the new component probably has a higher spectral index. The maximum proper motion of -0.46 mas yr-1 is expected if we suppose that the new component is moving away from core at the beginning of the flaring.