Aiming at the nonlinear system identification problem, a parallel recursive affine projection (AP) adaptive algorithm for the nonlinear system based on Volterra series is presented in this paper. The algorithm identif...Aiming at the nonlinear system identification problem, a parallel recursive affine projection (AP) adaptive algorithm for the nonlinear system based on Volterra series is presented in this paper. The algorithm identifies in parallel the Volterra kernel of each order, recursively estimate the inverse of the autocorrelation matrix for the Volterra input of each order, and remarkably improve the convergence speed of the identification process compared with the NLMS and conventional AP adaptive algorithm based on Volterra series. Simulation results indicate that the proposed method in this paper is efficient.展开更多
Vision localization methods have been widely used in the motion estimation of unmanned aerial vehicles(UAVs).The noise of the vision location result is usually modeled as a white Gaussian noise so that this location r...Vision localization methods have been widely used in the motion estimation of unmanned aerial vehicles(UAVs).The noise of the vision location result is usually modeled as a white Gaussian noise so that this location result could be utilized as the observation vector in the Kalman filter to estimate the motion of the vehicle.Since the noise of the vision location result is affected by external environment,the variance of the noise is uncertain.However,in previous researches,the variance is usually set as a fixed empirical value,which will lower the accuracy of the motion estimation.The main contribution of this paper is that we proposed a novel adaptive noise variance identification(ANVI) method,which utilizes the special kinematic properties of the UAV for frequency analysis and then adaptively identifies the variance of the noise.The adaptively identified variance is used in the Kalman filter for more accurate motion estimation.The performance of the proposed method is assessed by simulations and field experiments on a quadrotor system.The results illustrate the effectiveness of the method.展开更多
Most of the processes in the industry have nonlinear behavior. Control of such processes with conventional control methods could lead to unstable, suboptimal, etc., results. On the other hand, the adaptive control is ...Most of the processes in the industry have nonlinear behavior. Control of such processes with conventional control methods could lead to unstable, suboptimal, etc., results. On the other hand, the adaptive control is a technique widely used for controlling of nonlinear systems. The approach here is based on the recursive identification of the external linear model as a linear representation of the originally nonlinear system. The controller then reacts to the change of the working point or disturbances which could occur by the change of the parameters, structure, etc. The polynomial synthesis together with the linear quadratic(LQ) approach is employed here for the controller synthesis. These techniques satisfy basic control requirements such as the stability, the reference signal tracking and the disturbance attenuation. Resulted controller could be tuned with the choice of weighting factors in LQ approach. This work investigates the effect of these factors on control results. Proposed methods are tested on the mathematical model of the isothermal continuous stirred-tank reactor and simulated results are also verified on the real model of the continuous stirred tank reactor.展开更多
文摘Aiming at the nonlinear system identification problem, a parallel recursive affine projection (AP) adaptive algorithm for the nonlinear system based on Volterra series is presented in this paper. The algorithm identifies in parallel the Volterra kernel of each order, recursively estimate the inverse of the autocorrelation matrix for the Volterra input of each order, and remarkably improve the convergence speed of the identification process compared with the NLMS and conventional AP adaptive algorithm based on Volterra series. Simulation results indicate that the proposed method in this paper is efficient.
基金supported by National Science and Technology Major Projects of the Ministry of Science and Technology of China:ITER(No.2012GB102007)
文摘Vision localization methods have been widely used in the motion estimation of unmanned aerial vehicles(UAVs).The noise of the vision location result is usually modeled as a white Gaussian noise so that this location result could be utilized as the observation vector in the Kalman filter to estimate the motion of the vehicle.Since the noise of the vision location result is affected by external environment,the variance of the noise is uncertain.However,in previous researches,the variance is usually set as a fixed empirical value,which will lower the accuracy of the motion estimation.The main contribution of this paper is that we proposed a novel adaptive noise variance identification(ANVI) method,which utilizes the special kinematic properties of the UAV for frequency analysis and then adaptively identifies the variance of the noise.The adaptively identified variance is used in the Kalman filter for more accurate motion estimation.The performance of the proposed method is assessed by simulations and field experiments on a quadrotor system.The results illustrate the effectiveness of the method.
文摘Most of the processes in the industry have nonlinear behavior. Control of such processes with conventional control methods could lead to unstable, suboptimal, etc., results. On the other hand, the adaptive control is a technique widely used for controlling of nonlinear systems. The approach here is based on the recursive identification of the external linear model as a linear representation of the originally nonlinear system. The controller then reacts to the change of the working point or disturbances which could occur by the change of the parameters, structure, etc. The polynomial synthesis together with the linear quadratic(LQ) approach is employed here for the controller synthesis. These techniques satisfy basic control requirements such as the stability, the reference signal tracking and the disturbance attenuation. Resulted controller could be tuned with the choice of weighting factors in LQ approach. This work investigates the effect of these factors on control results. Proposed methods are tested on the mathematical model of the isothermal continuous stirred-tank reactor and simulated results are also verified on the real model of the continuous stirred tank reactor.