Purpose–In response to the problem of insufficient traction/braking adhesion force caused by the existence of the third-body medium on the rail surface,this study aims to analyze the utilization of wheel-rail adhesio...Purpose–In response to the problem of insufficient traction/braking adhesion force caused by the existence of the third-body medium on the rail surface,this study aims to analyze the utilization of wheel-rail adhesion coefficient under different medium conditions and propose relevant measures for reasonable and optimized utilization of adhesion to ensure the traction/braking performance and operation safety of trains.Design/methodology/approach–Based on the PLS-160 wheel-rail adhesion simulation test rig,the study investigates the variation patterns of maximum utilized adhesion characteristics on the rail surface under different conditions of small creepage and large slip.Through statistical analysis of multiple sets of experimental data,the statistical distribution patterns of maximum utilized adhesion on the rail surface are obtained,and a method for analyzing wheel-rail adhesion redundancy based on normal distribution is proposed.The study analyzes the utilization of traction/braking adhesion,as well as adhesion redundancy,for different medium under small creepage and large slip conditions.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived.Findings–When the third-body medium exists on the rail surface,the train should adopt the low-level service braking to avoid the braking skidding by extending the braking distance.Compared with the current adhesion control strategy of small creepage,adopting appropriate strategies to control the train’s adhesion coefficient near the second peak point of the adhesion coefficient-slip ratio curve in large slip can effectively improve the traction/braking adhesion redundancy and the upper limit of adhesion utilization,thereby ensuring the traction/braking performance and operation safety of the train.Originality/value–Most existing studies focus on the wheel-rail adhesion coefficient values and variation patterns under different medium conditions,without considering whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train.Therefore,there is a risk of traction overspeeding/braking skidding.This study analyzes whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train and whether there is redundancy.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived to further ensure operation safety of the train.展开更多
Understanding the hydrate adhesion is important to tackling hydrate accretion in petro-pipelines.Herein,the relationship between the Tetrahydrofuran(THF)hydrate adhesion strength(AS)and surface stiffness on elastic co...Understanding the hydrate adhesion is important to tackling hydrate accretion in petro-pipelines.Herein,the relationship between the Tetrahydrofuran(THF)hydrate adhesion strength(AS)and surface stiffness on elastic coatings is systemically examined by experimental shear force measurements and theoretical methods.The mechanical factor-elastic modulus of the coatings greatly dictates the hydrate AS,which is explained by the adhesion mechanics theory,beyond the usual factors such as wettability and structural roughness.Moreover,the hydrate AS increases with reducing the thickness of the elastic coatings,resulted from the decrease of the apparent surface elastic modulus.The effect of critical thickness for the elastic materials with variable elastic modulus on the hydrate AS is also revealed.This study provides deep perspectives on the regulation of the hydrate AS by the elastic modulus of elastic materials,which is of significance to design anti-hydrate surfaces for mitigation of hydrate accretion in petro-pipelines.展开更多
Post-traumatic peritendinous adhesion presents a significant challenge in clinical medicine.This study proposes the use of diamond-like carbon(DLC)deposited on polylactic acid(PLA)membranes as a biophysical mechanism ...Post-traumatic peritendinous adhesion presents a significant challenge in clinical medicine.This study proposes the use of diamond-like carbon(DLC)deposited on polylactic acid(PLA)membranes as a biophysical mechanism for anti-adhesion barrier to encase ruptured tendons in tendon-injured rats.The results indicate that PLA/DLC composite membrane exhibits more efficient anti-adhesion effect than PLA membrane,with histological score decreasing from 3.12±0.27 to 2.20±0.22 and anti-adhesion effectiveness increasing from 21.61%to 44.72%.Mechanistically,the abundant C=O bond functional groups on the surface of DLC can reduce reactive oxygen species level effectively;thus,the phosphorylation of NF-κB and M1 polarization of macrophages are inhibited.Consequently,excessive inflammatory response augmented by M1 macrophage-originated cytokines including interleukin-6(IL-6),interleukin-1β(IL-1β),and tumor necrosis factor-α(TNF-α)is largely reduced.For biocompatibility evaluation,PLA/DLC membrane is slowly absorbed within tissue and displays prolonged barrier effects compared to traditional PLA membranes.Further studies show the DLC depositing decelerates the release of degradation product lactic acid and its induction of macrophage M2 polarization by interfering esterase and PLA ester bonds,which further delays the fibrosis process.It was found that the PLA/DLC membrane possess an efficient biophysical mechanism for treatment of peritendinous adhesion.展开更多
Solid-state zinc-ion capacitors are emerging as promising candidates for large-scale energy storage owing to improved safety,mechanical and thermal stability and easy-to-direct stacking.Hydrogel electrolytes are appea...Solid-state zinc-ion capacitors are emerging as promising candidates for large-scale energy storage owing to improved safety,mechanical and thermal stability and easy-to-direct stacking.Hydrogel electrolytes are appealing solid-state electrolytes because of eco-friendliness,high conductivity and intrinsic flexibility.However,the electrolyte/electrode interfacial contact and anti-freezing properties of current hydrogel electrolytes are still challenging for practical applications of zinc-ion capacitors.Here,we report a class of hydrogel electrolytes that couple high interfacial adhesion and anti-freezing performance.The synergy of tough hydrogel matrix and chemical anchorage enables a well-adhered interface between hydrogel electrolyte and electrode.Meanwhile,the cooperative solvation of ZnCl2 and LiCl hybrid salts renders the hydrogel electrolyte high ionic conductivity and mechanical elasticity simultaneously at low temperatures.More significantly,the Zn||carbon nanotubes hybrid capacitor based on this hydrogel electrolyte exhibits low-temperature capacitive performance,delivering high-energy density of 39 Wh kg^(-1)at-60°C with capacity retention of 98.7%over 10,000 cycles.With the benefits of the well-adhered electrolyte/electrode interface and the anti-freezing hydrogel electrolyte,the Zn/Li hybrid capacitor is able to accommodate dynamic deformations and function well under 1000 tension cycles even at-60°C.This work provides a powerful strategy for enabling stable operation of low-temperature zinc-ion capacitors.展开更多
There is an urgent need for novel processes that can integrate different functional nanostructures onto specific substrates,so as to meet the fast-growing need for broad applications in nanoelectronics,nanophotonics,a...There is an urgent need for novel processes that can integrate different functional nanostructures onto specific substrates,so as to meet the fast-growing need for broad applications in nanoelectronics,nanophotonics,and fexible optoelectronics.Existing direct-lithography methods are difficult to use on fexible,nonplanar,and biocompatible surfaces.Therefore,this fabrication is usually accomplished by nanotransfer printing.However,large-scale integration of multiscale nanostructures with unconventional substrates remains challenging because fabrication yields and quality are often limited by the resolution,uniformity,adhesivity,and integrity of the nanostructures formed by direct transfer.Here,we proposed a resist-based transfer strategy enabled by near-zero adhesion,which was achieved by molecular modification to attain a critical surface energy interval.This approach enabled the intact transfer of wafer-scale,ultrathin-resist nanofilms onto arbitrary substrates with mitigated cracking and wrinkling,thereby facilitating the in situ fabrication of nanostructures for functional devices.Applying this approach,fabrication of three-dimensional-stacked multilayer structures with enhanced functionalities,nanoplasmonic structures with~10 nm resolution,and MoS2-based devices with excellent performance was demonstrated on specific substrates.These results collectively demonstrated the high stability,reliability,and throughput of our strategy for optical and electronic device applications.展开更多
Multiple myeloma(MM)is a hematologic malignancy notorious for its high relapse rate and development of drug resistance,in which cell adhesion-mediated drug resistance plays a critical role.This study integrated four R...Multiple myeloma(MM)is a hematologic malignancy notorious for its high relapse rate and development of drug resistance,in which cell adhesion-mediated drug resistance plays a critical role.This study integrated four RNA sequencing datasets(CoMMpass,GSE136337,GSE9782,and GSE2658)and focused on analyzing 1706 adhesionrelated genes.Rigorous univariate Cox regression analysis identified 18 key prognosis-related genes,including KIF14,TROAP,FLNA,MSN,LGALS1,PECAM1,and ALCAM,which demonstrated the strongest associations with poor overall survival(OS)in MM patients.To comprehensively evaluate the impact of cell adhesion on MM prognosis,an adhesion-related risk score(ARRS)model was constructed using Lasso Cox regression analysis.The ARRS model emerged as an independent prognostic factor for predicting OS.Furthermore,our findings revealed that a heightened cell adhesion effect correlated with tumor resistance to DNA-damaging drugs,protein kinase inhibitors,and drugs targeting the PI3K/Akt/mTOR signaling pathway.Nevertheless,we identified promising drug candidates,such as tirofiban,pirenzepine,erlotinib,and bosutinib,which exhibit potential in reversing this resistance.In vitro,experiments employing NCIH929,RPMI8226,and AMO1 cell lines confirmed that MM cell lines with high ARRS exhibited poor sensitivity to the aforementioned candidate drugs.By employing siRNA-mediated knockdown of the key ARRS model gene KIF14,we observed suppressed proliferation of NCIH929 cells,along with decreased adhesion to BMSCs and fibronectin.This study presents compelling evidence establishing cell adhesion as a significant prognostic factor in MM.Additionally,potential molecular mechanisms underlying adhesion-related resistance are proposed,along with viable strategies to overcome such resistance.These findings provide a solid scientific foundation for facilitating clinically stratified treatment of MM.展开更多
Purpose: This review examines the diagnostic value of transvaginal 3D ultrasound image texture analysis for the diagnosis of uterine adhesions. Materials and Methods: The total clinical data of 53 patients with uterin...Purpose: This review examines the diagnostic value of transvaginal 3D ultrasound image texture analysis for the diagnosis of uterine adhesions. Materials and Methods: The total clinical data of 53 patients with uterine adhesions diagnosed by hysteroscopy and the imaging data of transvaginal three-dimensional ultrasound from the Second Affiliated Hospital of Chongqing Medical University from June 2022 to August 2023 were retrospectively analysed. Based on hysteroscopic surgical records, patients were divided into two independent groups: normal endometrium and uterine adhesion sites. The samples were divided into a training set and a test set, and the transvaginal 3D ultrasound was used to outline the region of interest (ROI) and extract texture features for normal endometrium and uterine adhesions based on hysteroscopic surgical recordings, the training set data were feature screened and modelled using lasso regression and cross-validation, and the diagnostic efficacy of the model was assessed by applying the subjects’ operating characteristic (ROC) curves. Results: For each group, 290 texture feature parameters were extracted and three higher values were screened out, and the area under the curve of the constructed ultrasonographic scoring model was 0.658 and 0.720 in the training and test sets, respectively. Conclusion Relative clinical value of transvaginal three-dimensional ultrasound image texture analysis for the diagnosis of uterine adhesions.展开更多
We improved the adhesion between silicon based insulating materials and epoxy resin composites by adding the adhesion promoter cycloborosiloxane(BSi,cyclo-1,3,3,5,7,7-hexaphenyl-1,5-diboro-3,7-disiloxane).The experime...We improved the adhesion between silicon based insulating materials and epoxy resin composites by adding the adhesion promoter cycloborosiloxane(BSi,cyclo-1,3,3,5,7,7-hexaphenyl-1,5-diboro-3,7-disiloxane).The experimental results show that the addition of BSi in the silicone rubber(SR)system significantly increases the tensile shear strength between BSi and epoxy resin(EP),reaching 309%of the original value.On this basis,the mechanism of BSi to enhance the adhesion effect was discussed.The electron deficient B in BSi attracted the electron rich N and O in EP to enhance the chemical interaction,combined with the interfacial migration behavior in the curing process,to improve the adhesion strength.This study provides the design and synthesis ideas of adhesive aids,and a reference for further exploring the interface mechanism of epoxy resin matrix composites.展开更多
The steel lining of huge facilities is a significant structure,which experiences extreme environments and needs to be inspected periodically after manufacture.However,due to the complexity(crisscross welds,curved surf...The steel lining of huge facilities is a significant structure,which experiences extreme environments and needs to be inspected periodically after manufacture.However,due to the complexity(crisscross welds,curved surface,etc.)of their inside environments,high demands for stable adhesion and curvature adaptability are put forward.This paper presents a novel wheeled magnetic adhesion robot with passive suspension applied in nuclear power containment called NuBot,and mainly focuses on the following aspects:(1)proposing the wheeled locomotion suspension to adapt the robot to the uneven surface;(2)implementing the parameter optimization of NuBot.A comprehensive optimization model is established,and global optimal dimensions are properly chosen from performance atlases;(3)determining the normalization factor and actual dimensional parameters by constraints of the steel lining environment;(4)structure design of the overall robot and the magnetic wheels are completed.Experiments show that the robot can achieve precise locomotion on both strong and weak magnetic walls with various inclination angles,and can stably cross the 5 mm weld seam.Besides,its maximum payload capacity reaches 3.6 kg.Results show that the NuBot designed by the proposed systematic method has good comprehensive capabilities of surface-adaptability,adhesion stability,and payload.Besides,the robot can be applied in more ferromagnetic environments and the design method offers guidance for similar wheeled robots with passive suspension.展开更多
Ice nucleation and accretion on structural surfaces are sources of major safety and operational concerns in many industries including aviation and renewable energy.Common methods for tackling these are active ones suc...Ice nucleation and accretion on structural surfaces are sources of major safety and operational concerns in many industries including aviation and renewable energy.Common methods for tackling these are active ones such as heating,ultrasound,and chemicals or passive ones such as surface coatings.In this study,we explored the ice adhesion properties of slippery coated substrates by measuring the shear forces required to remove a glaze ice block on the coated substrates.Among the studied nanostructured and nanoscale surfaces[i.e.,a superhydrophobic coating,a fluoropolymer coating,and a polydimethylsiloxane(PDMS)chain coating],the slippery omniphobic covalently attached liquid(SOCAL)surface with its flexible polymer brushes and liquid-like structure significantly reduced the ice adhesion on both glass and silicon surfaces.Further studies of the SOCAL coating on roughened substrates also demonstrated its low ice adhesion.The reduction in ice adhesion is attributed to the flexible nature of the brush-like structures of PDMS chains,allowing ice to detach easily.展开更多
Micro-sized silicon anodes have shown much promise in large-scale industrial production of high-energy lithium batteries.However,large volume change(>300%)of silicon anodes causes severe particle pulverization and ...Micro-sized silicon anodes have shown much promise in large-scale industrial production of high-energy lithium batteries.However,large volume change(>300%)of silicon anodes causes severe particle pulverization and the formation of unstable solid electrolyte interphases during cycling,leading to rapid capacity decay and short cycle life of lithium-ion batteries.When addressing such issues,binder plays key roles in obtaining good structural integrity of silicon anodes.Herein,we report a biopolymer composite binder composed of rigid poly(acrylic acid)(PAA)and flexible silk fibroin(SF)tailored for micro-sized silicon anodes.The PAA/SF binder shows robust gradient binding energy via chemical interactions between carboxyl and amide groups,which can effectively accommodate large volume change of silicon.This PAA/SF binder also shows much stronger adhesion force and improved binding towards high-surface/defective carbon additives,resulting in better electrochemical stability and higher coulombic efficiency,than conventional PAA binder.As such,micro-sized silicon/carbon anodes fabricated with novel PAA/SF binder exhibit much better cyclability(up to 500 cycles at 0.5 C)and enhanced rate capability compared with conventional PAA-based anodes.This work provides new insights into the design of functional binders for high-capacity electrodes suffering from large volume change for the development of nextgeneration lithium batteries.展开更多
Interparticle adhesion force has a controlling effect on the physical and mechanical properties of planetary regolith and rocks.The current research on the adhesion force of planetary regolith and rock particles has b...Interparticle adhesion force has a controlling effect on the physical and mechanical properties of planetary regolith and rocks.The current research on the adhesion force of planetary regolith and rock particles has been primarily based on the assumption of smooth spherical particles to calculate the intergranular adhesion force;this approach lacks consideration for the adhesion force between irregular shaped particles.In our study,an innovative approach was established to directly measure the adhesion force between the arbitrary irregular shaped particles;the probe was modified using simulated lunar soil particles that were a typical representation of planetary regolith.The experimental results showed that for irregular shaped mineral particles,the particle size and mineral composition had no significant influence on the interparticle adhesion force;however,the complex morphology of the contact surface predominantly controlled the adhesion force.As the contact surface roughness increased,the adhesion force gradually decreased,and the rate of decrease gradually slowed;these results were consistent with the change trend predicted via the theoretical models of quantum electrodynamics.Moreover,a theoretical model to predict the adhesion force between the irregular shaped particles was constructed based on Rabinovich’s theory,and the prediction results were correlated with the experimental measurements.展开更多
Flexible perovskite solar cells have attracted widespread attention due to their unique advantages in lightweight,high flexibility,and easy deformation,which are suitable for portable electronics.However,the inverted(...Flexible perovskite solar cells have attracted widespread attention due to their unique advantages in lightweight,high flexibility,and easy deformation,which are suitable for portable electronics.However,the inverted(p-i-n)structured devices suffer from poor stability largely due to the low adhesion at the brittle interface(the hole transport layer/perovskite).Herein,zeolitic imidazolate framework-67(ZIF-67)is applied to inverted structured cells to optimize the interface and prolong the device lifetime.As a result,the flexible devices based on ZIF-67 obtain the champion power conversion efficiency of 20.16%.Over 1000 h under continuous light irradiation,the device retains 96%and 80%of its original efficiency without and with bias,respectively.Notably,devices show mechanical endurance with over 78%efficiency retention after 10,000 cycles of consecutive bending cycles(R=6 mm).The introduction of ZIF-67 suppresses the cracking in device bending,which results in improved environmental stability and bending durability.展开更多
Ultra-high molecular weight polyethylene(UHMWPE)fiber is a new kind of high-performance fiber.Due to its excellent physical and chemical characteristics,it is widely used in various fields.However,the surface UHMWPE f...Ultra-high molecular weight polyethylene(UHMWPE)fiber is a new kind of high-performance fiber.Due to its excellent physical and chemical characteristics,it is widely used in various fields.However,the surface UHMWPE fiber is smooth and demonstrates no-polar groups.The weak interfacial adhesion between fiber and resin seri-ously restricts the applications of UHMWPE fiber.Therefore,the surface modification treatments of UHMWPE fiber are used to improve the interfacial adhesion strength.The modified method by adding nanomaterials elu-cidates the easy fabrication,advanced equipment and proper technology.Thus,the progress of UHMWPE nanocomposite fibers prepared via adding various nanofillers are reviewed.Meanwhile,the effects of other various methods on surface modification are also reviewed.This work advances the various design strategies about nano technologies on improving interfacial adhesion performance via treatment methodologies.展开更多
Although some progress in plasma modification of the polytetrafluoroethylene(PTFE) surface has been made recently,its adhesion strength still needs to be further improved.In this work,the surface of a PTFE sample was ...Although some progress in plasma modification of the polytetrafluoroethylene(PTFE) surface has been made recently,its adhesion strength still needs to be further improved.In this work,the surface of a PTFE sample was treated with a two-step in-situ method.Firstly,the PTFE surface was treated with capacitively coupled Ar plasma to improve its mechanical interlocking performance;then,Ar+NH_(3)+CH_(4) plasma was used to deposit an a-CNx:H cross-linking layer on the PTFE surface to improve the molecular bonding ability.After treatment,a high specific surface area of 2.20 and a low F/C ratio of 0.32 were achieved on the PTFE surface.Its surface free energy was increased significantly and its maximum adhesion strength reached77.1 N·10 mm^(-1),which is 56% higher than that of the single-step Ar plasma-treated sample and32% higher than that of the single-step Ar+CH_(4)+NH_(3) plasma-treated sample.展开更多
Background: Examination of the endometrial cavity is crucial in the management of infertile women. This evaluation is done by Hysterosalpingography (HSG) in the University of Port Harcourt Teaching Hospital. The diagn...Background: Examination of the endometrial cavity is crucial in the management of infertile women. This evaluation is done by Hysterosalpingography (HSG) in the University of Port Harcourt Teaching Hospital. The diagnostic value and accuracy of hysterosalpingography varies in various centres and has not been assessed in the University of Port Harcourt Teaching Hospital (UPTH), hence this study. Methodology: A prospective cross sectional study done among 101 infertile women at the gynaecology clinic of the UPTH from December 2018 to July 2019. Socio-demographic data of women who met the eligibility criteria were collected. Their hysterosalpingographic and outpatient hysteroscopic findings were statistically analyzed using IBM SPSS for windows version 20.0. The validity and reliability statistics of hysterosalpingography for the identification of endometrial adhesions were determined and significance was reported at p-value < 0.05. The analyzed data was presented in tables and figure. Result: The respondents were all married, 66.3% of them were nulliparous, while 54.5% were above 35 years of age. Most, 93.1% of the studied group had at least secondary education and had duration of infertility of more than 2 years. There was a moderate strength of agreement in the diagnostic accuracy of HSG with hysteroscopy in the diagnosis of intrauterine adhesions;showing sensitivity and specificity of 59.6% and 90.9% respectively. The accuracy of HSG in the identification of intrauterine adhesions in this study was 73.3%. The agreement in the diagnostic accuracy of HSG using Hysteroscopy as a gold standard for intrauterine adhesions was therefore moderately significant (k = 0.482). Conclusion: HSG had an overall fair strength of agreement with office hysteroscopy in the identification of intrauterine adhesions. It is a specific but not a sensitive predictor of intrauterine adhesion.展开更多
Regulation of the adhesion molecules expression by cytokine in vascular endothelial cells was investigated. Human umbilical vein endothelial cells (HUVEC) were stimulated with cytokines, TNF α (1-250 U/ml) or IL 1...Regulation of the adhesion molecules expression by cytokine in vascular endothelial cells was investigated. Human umbilical vein endothelial cells (HUVEC) were stimulated with cytokines, TNF α (1-250 U/ml) or IL 1β (0.1-50 U/ml) for 24 h. HUVEC were also cultured with cytokines, TNF α (100 U/ml) or IL 1β (10 U/ml), for 4-72 h, cell surface expression of adhesion molecules (ICAM 1 and VCAM 1) were detected and quantitated by immunocytochemical methods and computerized imaging analysis technique. Adhesion molecules expression were up regulated by TNF α, IL 1β in a concentration and time dependent manner. Some significant differences were observed between the effects of cytokines on the ICAM 1 and on VCAM 1 expression. Cytokines might directly induce the expression of ICAM 1 and VCAM 1 in vascular endothelial cells. Our observations indicate differential functions of the two adhesion molecules during the evolution of inflammatory responses in stroke.展开更多
Pingyangmycin (bleomycin A5 hydrochloride,PYM) is one of the anti-neoplastic agents which have been commonly used to treat venous malformations.However,the underlying mechanism by which PYM treats venous malformations...Pingyangmycin (bleomycin A5 hydrochloride,PYM) is one of the anti-neoplastic agents which have been commonly used to treat venous malformations.However,the underlying mechanism by which PYM treats venous malformations remains poorly understood.It was reported that venous endothelial cells could recruit neutrophils via adhesion molecules (E-selectin,ICAM-1,ICAM-3,VCAM-1) during the acute/chronic inflammation and subsequent histological fibrosis after sclerotherapy with PYM.This study explored if the expression of E-selectin,ICAM-1,ICAM-3 and VCAM-1 in human venous malformation endothelial cells could be affected by PYM.HVMECs were cultured from human venous malformation tissue.Expressions of E-selectin,ICAM-1,ICAM-3 and VCAM-1 on HVMECs in response to PYM were analyzed by cell ELISA.The relative levels of mRNA expression in the cells were semi-quantified.The results showed that PYM up-regulated the expressions of E-selectin,ICAM-3,VCAM-1 and ICAM-1 in both time-and concentration-dependent manner.Our findings suggested that PYM could induce the expression of adhesion molecules in HVMECs,which might be a possible mechanism by which sclerotherapy by intralesional injection of PYM treats venous malformations.展开更多
BACKGROUND Hepatic stellate cell(HSC)hyperactivation is a central link in liver fibrosis development.HSCs perform aerobic glycolysis to provide energy for their activation.Focal adhesion kinase(FAK)promotes aerobic gl...BACKGROUND Hepatic stellate cell(HSC)hyperactivation is a central link in liver fibrosis development.HSCs perform aerobic glycolysis to provide energy for their activation.Focal adhesion kinase(FAK)promotes aerobic glycolysis in cancer cells or fibroblasts,while FAK-related non-kinase(FRNK)inhibits FAK phosphorylation and biological functions.AIM To elucidate the effect of FRNK on liver fibrosis at the level of aerobic glycolytic metabolism in HSCs.METHODS Mouse liver fibrosis models were established by administering CCl4,and the effect of FRNK on the degree of liver fibrosis in the model was evaluated.Transforming growth factor-β1 was used to activate LX-2 cells.Tyrosine phosphorylation at position 397(pY397-FAK)was detected to identify activated FAK,and the expression of the glycolysis-related proteins monocarboxylate transporter 1(MCT-1)and enolase1(ENO1)was assessed.Bioinformatics analysis was performed to predict putative binding sites for c-myc in the ENO1 promoter region,which were validated with chromatin immunoprecipitation(ChIP)and dual luciferase reporter assays.RESULTS The pY397-FAK level was increased in human fibrotic liver tissue.FRNK knockout promoted liver fibrosis in mouse models.It also increased the activation,migration,proliferation and aerobic glycolysis of primary hepatic stellate cells(pHSCs)but inhibited pHSC apoptosis.Nevertheless,opposite trends for these phenomena were observed after exogenous FRNK treatment in LX-2 cells.Mechanistically,the FAK/Ras/c-myc/ENO1 pathway promoted aerobic glycolysis,which was inhibited by exogenous FRNK.CONCLUSION FRNK inhibits aerobic glycolysis in HSCs by inhibiting the FAK/Ras/c-myc/ENO1 pathway,thereby improving liver fibrosis.FRNK might be a potential target for liver fibrosis treatment.展开更多
Hydrogels with multifunctionalities,including sufficient bonding strength,injectability and self-healing capacity,responsive-adhesive ability,fault-tolerant and repeated tissue adhesion,are urgently demanded for invas...Hydrogels with multifunctionalities,including sufficient bonding strength,injectability and self-healing capacity,responsive-adhesive ability,fault-tolerant and repeated tissue adhesion,are urgently demanded for invasive wound closure and wound healing.Motivated by the adhesive mechanism of mussel and brown algae,bioinspired dynamic bonds cross-linked multifunctional hydrogel adhesive is designed based on sodium alginate(SA),gelatin(GT)and protocatechualdehyde,with ferric ions added,for sutureless post-wound-closure.The dynamic hydrogel cross-linked through Schiff base bond,catechol-Fe coordinate bond and the strong interaction between GT with temperature-dependent phase transition and SA,endows the resulting hydrogel with sufficient mechanical and adhesive strength for efficient wound closure,injectability and self-healing capacity,and repeated closure of reopened wounds.Moreover,the temperature-dependent adhesive properties endowed mispositioning hydrogel to be removed/repositioned,which is conducive for the fault-tolerant adhesion of the hydrogel adhesives during surgery.Besides,the hydrogels present good biocompatibility,near-infrared-assisted photothermal antibacterial activity,antioxidation and repeated thermo-responsive reversible adhesion and good hemostatic effect.The in vivo incision closure evaluation demonstrated their capability to promote the post-wound-closure and wound healing of the incisions,indicating that the developed reversible adhesive hydrogel dressing could serve as versatile tissue sealant.展开更多
文摘Purpose–In response to the problem of insufficient traction/braking adhesion force caused by the existence of the third-body medium on the rail surface,this study aims to analyze the utilization of wheel-rail adhesion coefficient under different medium conditions and propose relevant measures for reasonable and optimized utilization of adhesion to ensure the traction/braking performance and operation safety of trains.Design/methodology/approach–Based on the PLS-160 wheel-rail adhesion simulation test rig,the study investigates the variation patterns of maximum utilized adhesion characteristics on the rail surface under different conditions of small creepage and large slip.Through statistical analysis of multiple sets of experimental data,the statistical distribution patterns of maximum utilized adhesion on the rail surface are obtained,and a method for analyzing wheel-rail adhesion redundancy based on normal distribution is proposed.The study analyzes the utilization of traction/braking adhesion,as well as adhesion redundancy,for different medium under small creepage and large slip conditions.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived.Findings–When the third-body medium exists on the rail surface,the train should adopt the low-level service braking to avoid the braking skidding by extending the braking distance.Compared with the current adhesion control strategy of small creepage,adopting appropriate strategies to control the train’s adhesion coefficient near the second peak point of the adhesion coefficient-slip ratio curve in large slip can effectively improve the traction/braking adhesion redundancy and the upper limit of adhesion utilization,thereby ensuring the traction/braking performance and operation safety of the train.Originality/value–Most existing studies focus on the wheel-rail adhesion coefficient values and variation patterns under different medium conditions,without considering whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train.Therefore,there is a risk of traction overspeeding/braking skidding.This study analyzes whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train and whether there is redundancy.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived to further ensure operation safety of the train.
基金This work is financially supported by the Key Laboratory of Icing and Anti/De-icing of CARDC(Grant No.IADL20210402)the National Natural Science Foundation of China(Grant Nos.12002350,12172314,11772278 and 11904300)+1 种基金the Jiangxi Provincial Outstanding Young Talents Program(Grant No.20192BCBL23029)the Fundamental Research Funds for the Central Universities(Xiamen University:Grant No.20720210025).
文摘Understanding the hydrate adhesion is important to tackling hydrate accretion in petro-pipelines.Herein,the relationship between the Tetrahydrofuran(THF)hydrate adhesion strength(AS)and surface stiffness on elastic coatings is systemically examined by experimental shear force measurements and theoretical methods.The mechanical factor-elastic modulus of the coatings greatly dictates the hydrate AS,which is explained by the adhesion mechanics theory,beyond the usual factors such as wettability and structural roughness.Moreover,the hydrate AS increases with reducing the thickness of the elastic coatings,resulted from the decrease of the apparent surface elastic modulus.The effect of critical thickness for the elastic materials with variable elastic modulus on the hydrate AS is also revealed.This study provides deep perspectives on the regulation of the hydrate AS by the elastic modulus of elastic materials,which is of significance to design anti-hydrate surfaces for mitigation of hydrate accretion in petro-pipelines.
基金supported by the National Natural Science Foundation of China(No.82172408,81772314,and 81922045)the Original Exploration project(22ZR1480300)+5 种基金Outstanding Academic Leaders(Youth)project(21XD1422900)of Shanghai Science and Technology Innovation Action PlanPrinciple Investigator Innovation Team of Both Shanghai Sixth People’s Hospital and Shanghai Institute of Nutrition and Health,Shanghai Jiao Tong University Medical College“Two-hundred Talent”Program(No.20191829)The Second Three-Year Action Plan for Promoting Clinical Skills and Clinical Innovation in Municipal Hospitals of Shanghai Shenkang(No.SHDC2020CR4032)Shanghai Excellent Academic Leader ProgramShanghai Engineering Research Center for Orthopaedic Material Innovation and Tissue Regeneration(No.20DZ2254100)China Postdoctoral Science Foundation(2023M742347).
文摘Post-traumatic peritendinous adhesion presents a significant challenge in clinical medicine.This study proposes the use of diamond-like carbon(DLC)deposited on polylactic acid(PLA)membranes as a biophysical mechanism for anti-adhesion barrier to encase ruptured tendons in tendon-injured rats.The results indicate that PLA/DLC composite membrane exhibits more efficient anti-adhesion effect than PLA membrane,with histological score decreasing from 3.12±0.27 to 2.20±0.22 and anti-adhesion effectiveness increasing from 21.61%to 44.72%.Mechanistically,the abundant C=O bond functional groups on the surface of DLC can reduce reactive oxygen species level effectively;thus,the phosphorylation of NF-κB and M1 polarization of macrophages are inhibited.Consequently,excessive inflammatory response augmented by M1 macrophage-originated cytokines including interleukin-6(IL-6),interleukin-1β(IL-1β),and tumor necrosis factor-α(TNF-α)is largely reduced.For biocompatibility evaluation,PLA/DLC membrane is slowly absorbed within tissue and displays prolonged barrier effects compared to traditional PLA membranes.Further studies show the DLC depositing decelerates the release of degradation product lactic acid and its induction of macrophage M2 polarization by interfering esterase and PLA ester bonds,which further delays the fibrosis process.It was found that the PLA/DLC membrane possess an efficient biophysical mechanism for treatment of peritendinous adhesion.
基金This work was supported by the Natural Science Foundation of Jiangsu Province(BK20220213)the Fundamental Research Funds of Jiangsu Key Laboratory of Biomass Energy and Material(JSBEM-S-202210 and JSBEM-S-202102).
文摘Solid-state zinc-ion capacitors are emerging as promising candidates for large-scale energy storage owing to improved safety,mechanical and thermal stability and easy-to-direct stacking.Hydrogel electrolytes are appealing solid-state electrolytes because of eco-friendliness,high conductivity and intrinsic flexibility.However,the electrolyte/electrode interfacial contact and anti-freezing properties of current hydrogel electrolytes are still challenging for practical applications of zinc-ion capacitors.Here,we report a class of hydrogel electrolytes that couple high interfacial adhesion and anti-freezing performance.The synergy of tough hydrogel matrix and chemical anchorage enables a well-adhered interface between hydrogel electrolyte and electrode.Meanwhile,the cooperative solvation of ZnCl2 and LiCl hybrid salts renders the hydrogel electrolyte high ionic conductivity and mechanical elasticity simultaneously at low temperatures.More significantly,the Zn||carbon nanotubes hybrid capacitor based on this hydrogel electrolyte exhibits low-temperature capacitive performance,delivering high-energy density of 39 Wh kg^(-1)at-60°C with capacity retention of 98.7%over 10,000 cycles.With the benefits of the well-adhered electrolyte/electrode interface and the anti-freezing hydrogel electrolyte,the Zn/Li hybrid capacitor is able to accommodate dynamic deformations and function well under 1000 tension cycles even at-60°C.This work provides a powerful strategy for enabling stable operation of low-temperature zinc-ion capacitors.
基金supported by the National Key Research and Development Program of China(No.2022YFB4602600)the National Natural Science Foundation of China(No.52221001)Hunan Provincial Innovation Foundation for Postgraduate(No.CX20220406)。
文摘There is an urgent need for novel processes that can integrate different functional nanostructures onto specific substrates,so as to meet the fast-growing need for broad applications in nanoelectronics,nanophotonics,and fexible optoelectronics.Existing direct-lithography methods are difficult to use on fexible,nonplanar,and biocompatible surfaces.Therefore,this fabrication is usually accomplished by nanotransfer printing.However,large-scale integration of multiscale nanostructures with unconventional substrates remains challenging because fabrication yields and quality are often limited by the resolution,uniformity,adhesivity,and integrity of the nanostructures formed by direct transfer.Here,we proposed a resist-based transfer strategy enabled by near-zero adhesion,which was achieved by molecular modification to attain a critical surface energy interval.This approach enabled the intact transfer of wafer-scale,ultrathin-resist nanofilms onto arbitrary substrates with mitigated cracking and wrinkling,thereby facilitating the in situ fabrication of nanostructures for functional devices.Applying this approach,fabrication of three-dimensional-stacked multilayer structures with enhanced functionalities,nanoplasmonic structures with~10 nm resolution,and MoS2-based devices with excellent performance was demonstrated on specific substrates.These results collectively demonstrated the high stability,reliability,and throughput of our strategy for optical and electronic device applications.
基金supported by Incubation Program for Clinical Trials(No.19HXFH030)Achievement Transformation Project(No.CGZH21001)+4 种基金1.3.5 Project for Disciplines of Excellence,West China Hospital,Sichuan University(No.ZYJC21007)Translational Research Grant of NCRCH(No.2021WWB03),Chengdu Science and Technology Program(No.2022-YF05-01444-SN)Key Research and Development Program of Sichuan Province(No.2023YFS0031)Post-Doctor Research Project,West China Hospital,Sichuan University(No.2023HXBH111)National Key Research and Development Program of China(Nos.2022YFC2502600,2022YFC2502603).
文摘Multiple myeloma(MM)is a hematologic malignancy notorious for its high relapse rate and development of drug resistance,in which cell adhesion-mediated drug resistance plays a critical role.This study integrated four RNA sequencing datasets(CoMMpass,GSE136337,GSE9782,and GSE2658)and focused on analyzing 1706 adhesionrelated genes.Rigorous univariate Cox regression analysis identified 18 key prognosis-related genes,including KIF14,TROAP,FLNA,MSN,LGALS1,PECAM1,and ALCAM,which demonstrated the strongest associations with poor overall survival(OS)in MM patients.To comprehensively evaluate the impact of cell adhesion on MM prognosis,an adhesion-related risk score(ARRS)model was constructed using Lasso Cox regression analysis.The ARRS model emerged as an independent prognostic factor for predicting OS.Furthermore,our findings revealed that a heightened cell adhesion effect correlated with tumor resistance to DNA-damaging drugs,protein kinase inhibitors,and drugs targeting the PI3K/Akt/mTOR signaling pathway.Nevertheless,we identified promising drug candidates,such as tirofiban,pirenzepine,erlotinib,and bosutinib,which exhibit potential in reversing this resistance.In vitro,experiments employing NCIH929,RPMI8226,and AMO1 cell lines confirmed that MM cell lines with high ARRS exhibited poor sensitivity to the aforementioned candidate drugs.By employing siRNA-mediated knockdown of the key ARRS model gene KIF14,we observed suppressed proliferation of NCIH929 cells,along with decreased adhesion to BMSCs and fibronectin.This study presents compelling evidence establishing cell adhesion as a significant prognostic factor in MM.Additionally,potential molecular mechanisms underlying adhesion-related resistance are proposed,along with viable strategies to overcome such resistance.These findings provide a solid scientific foundation for facilitating clinically stratified treatment of MM.
文摘Purpose: This review examines the diagnostic value of transvaginal 3D ultrasound image texture analysis for the diagnosis of uterine adhesions. Materials and Methods: The total clinical data of 53 patients with uterine adhesions diagnosed by hysteroscopy and the imaging data of transvaginal three-dimensional ultrasound from the Second Affiliated Hospital of Chongqing Medical University from June 2022 to August 2023 were retrospectively analysed. Based on hysteroscopic surgical records, patients were divided into two independent groups: normal endometrium and uterine adhesion sites. The samples were divided into a training set and a test set, and the transvaginal 3D ultrasound was used to outline the region of interest (ROI) and extract texture features for normal endometrium and uterine adhesions based on hysteroscopic surgical recordings, the training set data were feature screened and modelled using lasso regression and cross-validation, and the diagnostic efficacy of the model was assessed by applying the subjects’ operating characteristic (ROC) curves. Results: For each group, 290 texture feature parameters were extracted and three higher values were screened out, and the area under the curve of the constructed ultrasonographic scoring model was 0.658 and 0.720 in the training and test sets, respectively. Conclusion Relative clinical value of transvaginal three-dimensional ultrasound image texture analysis for the diagnosis of uterine adhesions.
基金the Core Research Facilities of College of Chemistry and Molecular Sciences and Wuhan University Test Center and Open Fund of Hubei Key Laboratory of Aerospace Power Advanced Technologythe Open Fund of Hubei Key Laboratory of Aerospace Power Advanced Technologythe Special Fund for Industrial and informatization Industry Foundation Reconstruction and High Quality Development of Manufacturing Industry(No.TC220H068)。
文摘We improved the adhesion between silicon based insulating materials and epoxy resin composites by adding the adhesion promoter cycloborosiloxane(BSi,cyclo-1,3,3,5,7,7-hexaphenyl-1,5-diboro-3,7-disiloxane).The experimental results show that the addition of BSi in the silicone rubber(SR)system significantly increases the tensile shear strength between BSi and epoxy resin(EP),reaching 309%of the original value.On this basis,the mechanism of BSi to enhance the adhesion effect was discussed.The electron deficient B in BSi attracted the electron rich N and O in EP to enhance the chemical interaction,combined with the interfacial migration behavior in the curing process,to improve the adhesion strength.This study provides the design and synthesis ideas of adhesive aids,and a reference for further exploring the interface mechanism of epoxy resin matrix composites.
基金Supported by Shanghai Nuclear Star Nuclear Power Technology Co.,Ltd,National Natural Science Foundation of China(Grant No.51735009)State Key Lab of Mechanical System and Vibration Project(Grant No.MSVZD202008).
文摘The steel lining of huge facilities is a significant structure,which experiences extreme environments and needs to be inspected periodically after manufacture.However,due to the complexity(crisscross welds,curved surface,etc.)of their inside environments,high demands for stable adhesion and curvature adaptability are put forward.This paper presents a novel wheeled magnetic adhesion robot with passive suspension applied in nuclear power containment called NuBot,and mainly focuses on the following aspects:(1)proposing the wheeled locomotion suspension to adapt the robot to the uneven surface;(2)implementing the parameter optimization of NuBot.A comprehensive optimization model is established,and global optimal dimensions are properly chosen from performance atlases;(3)determining the normalization factor and actual dimensional parameters by constraints of the steel lining environment;(4)structure design of the overall robot and the magnetic wheels are completed.Experiments show that the robot can achieve precise locomotion on both strong and weak magnetic walls with various inclination angles,and can stably cross the 5 mm weld seam.Besides,its maximum payload capacity reaches 3.6 kg.Results show that the NuBot designed by the proposed systematic method has good comprehensive capabilities of surface-adaptability,adhesion stability,and payload.Besides,the robot can be applied in more ferromagnetic environments and the design method offers guidance for similar wheeled robots with passive suspension.
基金supported by the Engineering and Physical Sciences Research Council(EPSRC)of the U.K.(Grant No.EP/P018998/1)the Acoustofluidics Special Interest Group of the UK Fluids Network(Grant No.EP/N032861/1)the EPSRC Centre for Doctoral Training in Renewable Energy Northeast Universities(ReNU)(Grant No.EP/S023836/1).
文摘Ice nucleation and accretion on structural surfaces are sources of major safety and operational concerns in many industries including aviation and renewable energy.Common methods for tackling these are active ones such as heating,ultrasound,and chemicals or passive ones such as surface coatings.In this study,we explored the ice adhesion properties of slippery coated substrates by measuring the shear forces required to remove a glaze ice block on the coated substrates.Among the studied nanostructured and nanoscale surfaces[i.e.,a superhydrophobic coating,a fluoropolymer coating,and a polydimethylsiloxane(PDMS)chain coating],the slippery omniphobic covalently attached liquid(SOCAL)surface with its flexible polymer brushes and liquid-like structure significantly reduced the ice adhesion on both glass and silicon surfaces.Further studies of the SOCAL coating on roughened substrates also demonstrated its low ice adhesion.The reduction in ice adhesion is attributed to the flexible nature of the brush-like structures of PDMS chains,allowing ice to detach easily.
文摘Micro-sized silicon anodes have shown much promise in large-scale industrial production of high-energy lithium batteries.However,large volume change(>300%)of silicon anodes causes severe particle pulverization and the formation of unstable solid electrolyte interphases during cycling,leading to rapid capacity decay and short cycle life of lithium-ion batteries.When addressing such issues,binder plays key roles in obtaining good structural integrity of silicon anodes.Herein,we report a biopolymer composite binder composed of rigid poly(acrylic acid)(PAA)and flexible silk fibroin(SF)tailored for micro-sized silicon anodes.The PAA/SF binder shows robust gradient binding energy via chemical interactions between carboxyl and amide groups,which can effectively accommodate large volume change of silicon.This PAA/SF binder also shows much stronger adhesion force and improved binding towards high-surface/defective carbon additives,resulting in better electrochemical stability and higher coulombic efficiency,than conventional PAA binder.As such,micro-sized silicon/carbon anodes fabricated with novel PAA/SF binder exhibit much better cyclability(up to 500 cycles at 0.5 C)and enhanced rate capability compared with conventional PAA-based anodes.This work provides new insights into the design of functional binders for high-capacity electrodes suffering from large volume change for the development of nextgeneration lithium batteries.
基金supported by the National Natural Science Foundation of China(Nos.U22A20166,52104141,12172230 and U2013603)the Department of Science and Technology of Guangdong Province(No.2019ZT08G315)the Guangdong Basic and Applied Basic Research Foundation(No.2023A1515012654).
文摘Interparticle adhesion force has a controlling effect on the physical and mechanical properties of planetary regolith and rocks.The current research on the adhesion force of planetary regolith and rock particles has been primarily based on the assumption of smooth spherical particles to calculate the intergranular adhesion force;this approach lacks consideration for the adhesion force between irregular shaped particles.In our study,an innovative approach was established to directly measure the adhesion force between the arbitrary irregular shaped particles;the probe was modified using simulated lunar soil particles that were a typical representation of planetary regolith.The experimental results showed that for irregular shaped mineral particles,the particle size and mineral composition had no significant influence on the interparticle adhesion force;however,the complex morphology of the contact surface predominantly controlled the adhesion force.As the contact surface roughness increased,the adhesion force gradually decreased,and the rate of decrease gradually slowed;these results were consistent with the change trend predicted via the theoretical models of quantum electrodynamics.Moreover,a theoretical model to predict the adhesion force between the irregular shaped particles was constructed based on Rabinovich’s theory,and the prediction results were correlated with the experimental measurements.
基金funding support from the National Natural Science Foundation of China(U21A20172,21975028,22005035)the Beijing Natural Science Foundation(JQ19008)the China Postdoctoral Science Foundation(2020M670144,2020M680012,2020TQ0043)。
文摘Flexible perovskite solar cells have attracted widespread attention due to their unique advantages in lightweight,high flexibility,and easy deformation,which are suitable for portable electronics.However,the inverted(p-i-n)structured devices suffer from poor stability largely due to the low adhesion at the brittle interface(the hole transport layer/perovskite).Herein,zeolitic imidazolate framework-67(ZIF-67)is applied to inverted structured cells to optimize the interface and prolong the device lifetime.As a result,the flexible devices based on ZIF-67 obtain the champion power conversion efficiency of 20.16%.Over 1000 h under continuous light irradiation,the device retains 96%and 80%of its original efficiency without and with bias,respectively.Notably,devices show mechanical endurance with over 78%efficiency retention after 10,000 cycles of consecutive bending cycles(R=6 mm).The introduction of ZIF-67 suppresses the cracking in device bending,which results in improved environmental stability and bending durability.
文摘Ultra-high molecular weight polyethylene(UHMWPE)fiber is a new kind of high-performance fiber.Due to its excellent physical and chemical characteristics,it is widely used in various fields.However,the surface UHMWPE fiber is smooth and demonstrates no-polar groups.The weak interfacial adhesion between fiber and resin seri-ously restricts the applications of UHMWPE fiber.Therefore,the surface modification treatments of UHMWPE fiber are used to improve the interfacial adhesion strength.The modified method by adding nanomaterials elu-cidates the easy fabrication,advanced equipment and proper technology.Thus,the progress of UHMWPE nanocomposite fibers prepared via adding various nanofillers are reviewed.Meanwhile,the effects of other various methods on surface modification are also reviewed.This work advances the various design strategies about nano technologies on improving interfacial adhesion performance via treatment methodologies.
文摘Although some progress in plasma modification of the polytetrafluoroethylene(PTFE) surface has been made recently,its adhesion strength still needs to be further improved.In this work,the surface of a PTFE sample was treated with a two-step in-situ method.Firstly,the PTFE surface was treated with capacitively coupled Ar plasma to improve its mechanical interlocking performance;then,Ar+NH_(3)+CH_(4) plasma was used to deposit an a-CNx:H cross-linking layer on the PTFE surface to improve the molecular bonding ability.After treatment,a high specific surface area of 2.20 and a low F/C ratio of 0.32 were achieved on the PTFE surface.Its surface free energy was increased significantly and its maximum adhesion strength reached77.1 N·10 mm^(-1),which is 56% higher than that of the single-step Ar plasma-treated sample and32% higher than that of the single-step Ar+CH_(4)+NH_(3) plasma-treated sample.
文摘Background: Examination of the endometrial cavity is crucial in the management of infertile women. This evaluation is done by Hysterosalpingography (HSG) in the University of Port Harcourt Teaching Hospital. The diagnostic value and accuracy of hysterosalpingography varies in various centres and has not been assessed in the University of Port Harcourt Teaching Hospital (UPTH), hence this study. Methodology: A prospective cross sectional study done among 101 infertile women at the gynaecology clinic of the UPTH from December 2018 to July 2019. Socio-demographic data of women who met the eligibility criteria were collected. Their hysterosalpingographic and outpatient hysteroscopic findings were statistically analyzed using IBM SPSS for windows version 20.0. The validity and reliability statistics of hysterosalpingography for the identification of endometrial adhesions were determined and significance was reported at p-value < 0.05. The analyzed data was presented in tables and figure. Result: The respondents were all married, 66.3% of them were nulliparous, while 54.5% were above 35 years of age. Most, 93.1% of the studied group had at least secondary education and had duration of infertility of more than 2 years. There was a moderate strength of agreement in the diagnostic accuracy of HSG with hysteroscopy in the diagnosis of intrauterine adhesions;showing sensitivity and specificity of 59.6% and 90.9% respectively. The accuracy of HSG in the identification of intrauterine adhesions in this study was 73.3%. The agreement in the diagnostic accuracy of HSG using Hysteroscopy as a gold standard for intrauterine adhesions was therefore moderately significant (k = 0.482). Conclusion: HSG had an overall fair strength of agreement with office hysteroscopy in the identification of intrauterine adhesions. It is a specific but not a sensitive predictor of intrauterine adhesion.
文摘Regulation of the adhesion molecules expression by cytokine in vascular endothelial cells was investigated. Human umbilical vein endothelial cells (HUVEC) were stimulated with cytokines, TNF α (1-250 U/ml) or IL 1β (0.1-50 U/ml) for 24 h. HUVEC were also cultured with cytokines, TNF α (100 U/ml) or IL 1β (10 U/ml), for 4-72 h, cell surface expression of adhesion molecules (ICAM 1 and VCAM 1) were detected and quantitated by immunocytochemical methods and computerized imaging analysis technique. Adhesion molecules expression were up regulated by TNF α, IL 1β in a concentration and time dependent manner. Some significant differences were observed between the effects of cytokines on the ICAM 1 and on VCAM 1 expression. Cytokines might directly induce the expression of ICAM 1 and VCAM 1 in vascular endothelial cells. Our observations indicate differential functions of the two adhesion molecules during the evolution of inflammatory responses in stroke.
基金supported by the Natural Science Foundation of Hubei province,China (No.2010CDB07907)
文摘Pingyangmycin (bleomycin A5 hydrochloride,PYM) is one of the anti-neoplastic agents which have been commonly used to treat venous malformations.However,the underlying mechanism by which PYM treats venous malformations remains poorly understood.It was reported that venous endothelial cells could recruit neutrophils via adhesion molecules (E-selectin,ICAM-1,ICAM-3,VCAM-1) during the acute/chronic inflammation and subsequent histological fibrosis after sclerotherapy with PYM.This study explored if the expression of E-selectin,ICAM-1,ICAM-3 and VCAM-1 in human venous malformation endothelial cells could be affected by PYM.HVMECs were cultured from human venous malformation tissue.Expressions of E-selectin,ICAM-1,ICAM-3 and VCAM-1 on HVMECs in response to PYM were analyzed by cell ELISA.The relative levels of mRNA expression in the cells were semi-quantified.The results showed that PYM up-regulated the expressions of E-selectin,ICAM-3,VCAM-1 and ICAM-1 in both time-and concentration-dependent manner.Our findings suggested that PYM could induce the expression of adhesion molecules in HVMECs,which might be a possible mechanism by which sclerotherapy by intralesional injection of PYM treats venous malformations.
基金the National Natural Science Foundation of China,No.81860115,No.82060116 and No.81960118the Science and Technology Support Project of Guizhou Province,No.[2021]094.
文摘BACKGROUND Hepatic stellate cell(HSC)hyperactivation is a central link in liver fibrosis development.HSCs perform aerobic glycolysis to provide energy for their activation.Focal adhesion kinase(FAK)promotes aerobic glycolysis in cancer cells or fibroblasts,while FAK-related non-kinase(FRNK)inhibits FAK phosphorylation and biological functions.AIM To elucidate the effect of FRNK on liver fibrosis at the level of aerobic glycolytic metabolism in HSCs.METHODS Mouse liver fibrosis models were established by administering CCl4,and the effect of FRNK on the degree of liver fibrosis in the model was evaluated.Transforming growth factor-β1 was used to activate LX-2 cells.Tyrosine phosphorylation at position 397(pY397-FAK)was detected to identify activated FAK,and the expression of the glycolysis-related proteins monocarboxylate transporter 1(MCT-1)and enolase1(ENO1)was assessed.Bioinformatics analysis was performed to predict putative binding sites for c-myc in the ENO1 promoter region,which were validated with chromatin immunoprecipitation(ChIP)and dual luciferase reporter assays.RESULTS The pY397-FAK level was increased in human fibrotic liver tissue.FRNK knockout promoted liver fibrosis in mouse models.It also increased the activation,migration,proliferation and aerobic glycolysis of primary hepatic stellate cells(pHSCs)but inhibited pHSC apoptosis.Nevertheless,opposite trends for these phenomena were observed after exogenous FRNK treatment in LX-2 cells.Mechanistically,the FAK/Ras/c-myc/ENO1 pathway promoted aerobic glycolysis,which was inhibited by exogenous FRNK.CONCLUSION FRNK inhibits aerobic glycolysis in HSCs by inhibiting the FAK/Ras/c-myc/ENO1 pathway,thereby improving liver fibrosis.FRNK might be a potential target for liver fibrosis treatment.
基金supported by the National Natural Science Foundation of China (No. 51973172)Natural Science Foundation of Shaanxi Province (Nos. 2020JC-03 and 2019TD-020)+2 种基金the State Key Laboratory for Mechanical Behavior of Materials,the World-Class Universities (Disciplines) and Characteristic Development Guidance Funds for the Central UniversitiesFundamental Research Funds for the Central Universitiesthe Opening Project of the Key Laboratory of Shaanxi Province for Craniofacial Precision Medicine Research,College of Stomatology,Xi’an Jiaotong University (No. 2019LHM-KFKT008).
文摘Hydrogels with multifunctionalities,including sufficient bonding strength,injectability and self-healing capacity,responsive-adhesive ability,fault-tolerant and repeated tissue adhesion,are urgently demanded for invasive wound closure and wound healing.Motivated by the adhesive mechanism of mussel and brown algae,bioinspired dynamic bonds cross-linked multifunctional hydrogel adhesive is designed based on sodium alginate(SA),gelatin(GT)and protocatechualdehyde,with ferric ions added,for sutureless post-wound-closure.The dynamic hydrogel cross-linked through Schiff base bond,catechol-Fe coordinate bond and the strong interaction between GT with temperature-dependent phase transition and SA,endows the resulting hydrogel with sufficient mechanical and adhesive strength for efficient wound closure,injectability and self-healing capacity,and repeated closure of reopened wounds.Moreover,the temperature-dependent adhesive properties endowed mispositioning hydrogel to be removed/repositioned,which is conducive for the fault-tolerant adhesion of the hydrogel adhesives during surgery.Besides,the hydrogels present good biocompatibility,near-infrared-assisted photothermal antibacterial activity,antioxidation and repeated thermo-responsive reversible adhesion and good hemostatic effect.The in vivo incision closure evaluation demonstrated their capability to promote the post-wound-closure and wound healing of the incisions,indicating that the developed reversible adhesive hydrogel dressing could serve as versatile tissue sealant.