Aerodynamic roughness length (Z0m) is a key factor in surface flux estimations with remote sensing algorithms and/or land surface models. This paper calculates ZOrn over several land surfaces, with 3 years of experi...Aerodynamic roughness length (Z0m) is a key factor in surface flux estimations with remote sensing algorithms and/or land surface models. This paper calculates ZOrn over several land surfaces, with 3 years of experimental data from Xiaotangshan. The results show that Z0m is direction-dependent, mainly due to the heterogeneity of the size and spatial distribution of the roughness elements inside the source area along different wind directions. Furthermore, a heuristic parameterization of the aerodynamic roughness length for heterogeneous surfaces is proposed. Individual Z0m over each surface component (patch) is calculated firstly with the characteristic parameters of the roughness elements (vegetation height, leaf area index, etc.), then Z0m over the whole experimental field is aggregated, using the footprint weighting method.展开更多
It has previously been shown that aerodynamic roughness length changes significantly along with near- surface atmospheric thermodynamic state; however, at present, this phenomenon remains poorly understood, and very l...It has previously been shown that aerodynamic roughness length changes significantly along with near- surface atmospheric thermodynamic state; however, at present, this phenomenon remains poorly understood, and very little research concerning this topic has been conducted. In this paper, by using the data of different underlying surfaces provided by the Experimental Co-observation and Integral Research in Semi-arid and Arid Regions over North China, aerodynamic roughness length (z0) values in stable, neutral, and unstable atmospheric stratifications are compared with one another, and the relationship between z0 and atmospheric thermodynamic stability (() is analyzed. It is found that z0 shows great differences among the stable, neutral, and unstable atmospheric thermodynamic states, with the difference in z0 values between the fully thermodynamic stable condition and the neutral condition reaching 60% of the mean z0. F^trthermore, for the wind speed range in which the wind data are less sensitive to z0, the surface z0 changes more significantly with (, and is highly correlated with both the Monin-Obukhov stability (4o) and the overall Richardson number (Rib), with both of their correlation coefficients greater than 0.71 and 0.47 in the stable and unstable atmospheric stratification, respectively. The empirical relation fitted with the experimental observations is quite consistent with the Zilitinkevich theoretical relation in the stable atmosphere, but the two are quite distinct and even show opposite variation tendencies in the unstable atmosphere. In application, however, verification of the empirical fitted relations by using the experimental data finds that the fitted relation is slightly more applicable than the Zilitinkevich theoretical relation in stable atmospheric stratification, but it is much more suitable than the Zilitinkevich relation in unstable atmospheric stratification.展开更多
Aerodynamic roughness length is an important physical parameter in atmospheric numerical models and microme- teorological calculations, the accuracy of which can affect numerical model performance and the level of mic...Aerodynamic roughness length is an important physical parameter in atmospheric numerical models and microme- teorological calculations, the accuracy of which can affect numerical model performance and the level of micrometeorological computations. Many factors influence the aerodynamic roughness length, but formulas for its parameterization often only con- sider the action of a single factor. This limits their adaptive capacity and often introduces considerable errors in the estimation of land surface momentum flux (friction velocity). In this study, based on research into the parameterization relations between aerodynamic roughness length and influencing factors such as windrow conditions, thermodynamic characteristics of the sur- face layer, natural rhythm of vegetation growth, ecological effects of interannual fluctuations of precipitation, and vegetation type, an aerodynamic roughness length parameterization scheme was established. This considers almost all the factors that af- fect aerodynamic roughness length on flat land surfaces with short vegetation. Furthermore, using many years' data recorded at the Semi-Arid Climate and Environment Observatory of Lanzhou University, a comparative analysis of the application of the proposed parameterization scheme and other experimental schemes was performed. It was found that the error in the friction velocity estimated by the proposed parameterization scheme was considerably less than that estimated using a constant aero- dynamic roughness length and by the other parameterization schemes. Compared with the friction velocity estimated using a constant aerodynamic roughness length, the correlation coefficient with the observed friction velocity increased from 0.752 to 0.937, and the standard deviation and deviation decreased by about 20% and 80%, respectively. Its mean value differed from the observed value by only 0.004 m s-l and the relative error was only about 1.6%, which indicates a significant decrease in the estimation error of surface-layer momentum flux. The test results show that the multifactorial universal parameterization scheme of aerodynamic roughness length for flat land surfaces with short vegetation can offer a more scientific parameteriza- tion scheme for numerical atmospheric models.展开更多
In grassland ecosystems,the aerodynamic roughness(Z0)and frictional wind speed(u*)contribute to the aerodynamic impedance of the grassland canopy.Thus,they are often used in the studies of wind erosion and evapotransp...In grassland ecosystems,the aerodynamic roughness(Z0)and frictional wind speed(u*)contribute to the aerodynamic impedance of the grassland canopy.Thus,they are often used in the studies of wind erosion and evapotranspiration.However,the effect of wind speed and grazing measures on the aerodynamic impedance of the grassland canopy has received less analysis.In this study,we monitored wind speeds at multiple heights in grazed and grazing-prohibited grasslands for 1 month in 2021,determined the transit wind speed at 2.0 m height by comparing wind speed differences at the same height in both grasslands,and divided these transit wind speeds at intervals of 2.0 m/s to analyze the effect of the transit wind speed on the relationship among Z0,u*,and wind speed within the grassland canopy.The results showed that dividing the transit wind speeds into intervals has a positive effect on the logarithmic fit of the wind speed profile.After dividing the transit wind speeds into intervals,the wind speed at 0.1 m height(V0.1)gradually decreased with the increase of Z0,exhibiting three distinct stages:a sharp change zone,a steady change zone,and a flat zone;while the overall trend of u*increased first and then decreased with the increase of V0.1.Dividing the transit wind speeds into intervals improved the fitting relationship between Z0 and V0.1 and changed their fitting functions in grazed and grazing-prohibited grasslands.According to the computational fluid dynamic results,we found that the number of tall-stature plants has a more significant effect on windproof capacity than their height.The results of this study contribute to a better understanding of the relationship between wind speed and the aerodynamic impedance of vegetation in grassland environments.展开更多
Based on the measurements from the US National Data Buoy Center 3-m discus buoy site No. 44004 (38.5°N, 70.47°W) from January 1 to March 31 of 2003, with the COARE algorithm (Version 3.0), the results fr...Based on the measurements from the US National Data Buoy Center 3-m discus buoy site No. 44004 (38.5°N, 70.47°W) from January 1 to March 31 of 2003, with the COARE algorithm (Version 3.0), the results from four parameterization schemes developed recently for sea surface aerodynamic roughness length were compared with each other. Calculations of frictional speed u., drag coefficient Ca and wind stress r indicate that the calculated frictional velocities from the four schemes (8.50%-16.20%, the normalized standard error estimate, or NSEE), the computed drag coefficients and wind stress (respectively 15.08%-28.67% and 17.26%,50.59% NSEE) are reasonable. Schemes YT96 and GW03 are consistent. The 002 scheme gives overestimated values for u, and Ca. Schemes TY01 and GW03 display discontinuous characteristics in handling young wave data.展开更多
Over Antarctica,surface fluxes play an important role in the local atmospheric dynamical processes.To reveal the surface fluxes characteristics and aerodynamic and thermal roughness lengths over Zhongshan station,Anta...Over Antarctica,surface fluxes play an important role in the local atmospheric dynamical processes.To reveal the surface fluxes characteristics and aerodynamic and thermal roughness lengths over Zhongshan station,Antarctica,this paper analyzes the data observed at the station during 3 March 2008 through 15 February 2009.It is found that easterlies dominated this site throughout the whole year,with a maximum(average)speed of 25(5.6)m s−1 at 3.9 m height,and the annual maximum(minimum)surface temperature reached 291.05(230.05)K,while the annual maximum(minimum)air-specific humidity was 4.1(0.05)g/kg at 3.9 m height.The maximum(minimum)values of seasonal mean temperature,humidity,each radiation components,sensible and latent heat flux occurred in summer(winter),while for the seasonal averaged wind speed andτthe minimums(maximums)appeared in summer(autumn).After comparing with a partially linear regression method for aerodynamic roughness length and four previous equations that derive thermal roughness length from surface Reynolds number,constant values of aerodynamic roughness length as 3.6×10^(−3)m and thermal roughness length as 1.2×10^(−4)m at this site were validated by using the other three level observations and suggested for future studies.展开更多
基金supported by the Hi-tech Research and Development Program of China(2007AA12Z175)the Special Research Foundation of the Public Benefit Industry (GYHY200706046)+1 种基金the Project funded by the National Natural Science Foundation of China (Grant No. 40671128)the National Basic Research Program of China (2007CB714401)
文摘Aerodynamic roughness length (Z0m) is a key factor in surface flux estimations with remote sensing algorithms and/or land surface models. This paper calculates ZOrn over several land surfaces, with 3 years of experimental data from Xiaotangshan. The results show that Z0m is direction-dependent, mainly due to the heterogeneity of the size and spatial distribution of the roughness elements inside the source area along different wind directions. Furthermore, a heuristic parameterization of the aerodynamic roughness length for heterogeneous surfaces is proposed. Individual Z0m over each surface component (patch) is calculated firstly with the characteristic parameters of the roughness elements (vegetation height, leaf area index, etc.), then Z0m over the whole experimental field is aggregated, using the footprint weighting method.
基金Supported by the National Natural Science Foundation of China (40830957, 41075008, and 41075009)National Basic Research and Development (973) Program of China (2013CB430206)China Postdoctoral Science Foundation (20110490854)
文摘It has previously been shown that aerodynamic roughness length changes significantly along with near- surface atmospheric thermodynamic state; however, at present, this phenomenon remains poorly understood, and very little research concerning this topic has been conducted. In this paper, by using the data of different underlying surfaces provided by the Experimental Co-observation and Integral Research in Semi-arid and Arid Regions over North China, aerodynamic roughness length (z0) values in stable, neutral, and unstable atmospheric stratifications are compared with one another, and the relationship between z0 and atmospheric thermodynamic stability (() is analyzed. It is found that z0 shows great differences among the stable, neutral, and unstable atmospheric thermodynamic states, with the difference in z0 values between the fully thermodynamic stable condition and the neutral condition reaching 60% of the mean z0. F^trthermore, for the wind speed range in which the wind data are less sensitive to z0, the surface z0 changes more significantly with (, and is highly correlated with both the Monin-Obukhov stability (4o) and the overall Richardson number (Rib), with both of their correlation coefficients greater than 0.71 and 0.47 in the stable and unstable atmospheric stratification, respectively. The empirical relation fitted with the experimental observations is quite consistent with the Zilitinkevich theoretical relation in the stable atmosphere, but the two are quite distinct and even show opposite variation tendencies in the unstable atmosphere. In application, however, verification of the empirical fitted relations by using the experimental data finds that the fitted relation is slightly more applicable than the Zilitinkevich theoretical relation in stable atmospheric stratification, but it is much more suitable than the Zilitinkevich relation in unstable atmospheric stratification.
基金supported by State Key Program of National Natural Science Foundation of China(Grant No.40830957)
文摘Aerodynamic roughness length is an important physical parameter in atmospheric numerical models and microme- teorological calculations, the accuracy of which can affect numerical model performance and the level of micrometeorological computations. Many factors influence the aerodynamic roughness length, but formulas for its parameterization often only con- sider the action of a single factor. This limits their adaptive capacity and often introduces considerable errors in the estimation of land surface momentum flux (friction velocity). In this study, based on research into the parameterization relations between aerodynamic roughness length and influencing factors such as windrow conditions, thermodynamic characteristics of the sur- face layer, natural rhythm of vegetation growth, ecological effects of interannual fluctuations of precipitation, and vegetation type, an aerodynamic roughness length parameterization scheme was established. This considers almost all the factors that af- fect aerodynamic roughness length on flat land surfaces with short vegetation. Furthermore, using many years' data recorded at the Semi-Arid Climate and Environment Observatory of Lanzhou University, a comparative analysis of the application of the proposed parameterization scheme and other experimental schemes was performed. It was found that the error in the friction velocity estimated by the proposed parameterization scheme was considerably less than that estimated using a constant aero- dynamic roughness length and by the other parameterization schemes. Compared with the friction velocity estimated using a constant aerodynamic roughness length, the correlation coefficient with the observed friction velocity increased from 0.752 to 0.937, and the standard deviation and deviation decreased by about 20% and 80%, respectively. Its mean value differed from the observed value by only 0.004 m s-l and the relative error was only about 1.6%, which indicates a significant decrease in the estimation error of surface-layer momentum flux. The test results show that the multifactorial universal parameterization scheme of aerodynamic roughness length for flat land surfaces with short vegetation can offer a more scientific parameteriza- tion scheme for numerical atmospheric models.
基金funded by the National Natural Science Foundation of China(52279017 and 52079063)Technological Achievements of Inner Mongolia Autonomous Region of China(2020CG0054 and 2022YFDZ0050)+1 种基金the Graduate Education Innovation Program of Inner Mongolia Autonomous Region of China(B20210188Z)the Program for Innovative Research Team in Universities of Inner Mongolia Autonomous Region,China(NMGIRT2313).
文摘In grassland ecosystems,the aerodynamic roughness(Z0)and frictional wind speed(u*)contribute to the aerodynamic impedance of the grassland canopy.Thus,they are often used in the studies of wind erosion and evapotranspiration.However,the effect of wind speed and grazing measures on the aerodynamic impedance of the grassland canopy has received less analysis.In this study,we monitored wind speeds at multiple heights in grazed and grazing-prohibited grasslands for 1 month in 2021,determined the transit wind speed at 2.0 m height by comparing wind speed differences at the same height in both grasslands,and divided these transit wind speeds at intervals of 2.0 m/s to analyze the effect of the transit wind speed on the relationship among Z0,u*,and wind speed within the grassland canopy.The results showed that dividing the transit wind speeds into intervals has a positive effect on the logarithmic fit of the wind speed profile.After dividing the transit wind speeds into intervals,the wind speed at 0.1 m height(V0.1)gradually decreased with the increase of Z0,exhibiting three distinct stages:a sharp change zone,a steady change zone,and a flat zone;while the overall trend of u*increased first and then decreased with the increase of V0.1.Dividing the transit wind speeds into intervals improved the fitting relationship between Z0 and V0.1 and changed their fitting functions in grazed and grazing-prohibited grasslands.According to the computational fluid dynamic results,we found that the number of tall-stature plants has a more significant effect on windproof capacity than their height.The results of this study contribute to a better understanding of the relationship between wind speed and the aerodynamic impedance of vegetation in grassland environments.
基金supported by Nanjing University of Information Science& Technology, Jiangsu Key Laboratory of Meteorological Disaster Pro-gram (KLME 050210)
文摘Based on the measurements from the US National Data Buoy Center 3-m discus buoy site No. 44004 (38.5°N, 70.47°W) from January 1 to March 31 of 2003, with the COARE algorithm (Version 3.0), the results from four parameterization schemes developed recently for sea surface aerodynamic roughness length were compared with each other. Calculations of frictional speed u., drag coefficient Ca and wind stress r indicate that the calculated frictional velocities from the four schemes (8.50%-16.20%, the normalized standard error estimate, or NSEE), the computed drag coefficients and wind stress (respectively 15.08%-28.67% and 17.26%,50.59% NSEE) are reasonable. Schemes YT96 and GW03 are consistent. The 002 scheme gives overestimated values for u, and Ca. Schemes TY01 and GW03 display discontinuous characteristics in handling young wave data.
基金the National Natural Science Foundation of China(Grant Nos.41376005 and 41505004)the National Key Projects of Ministry of Science and Technology of China(2016YFA0602100)+1 种基金the Chinese Polar Environmental Comprehensive Investigation and Assessment Program,and the Open Project Program(KLME1508)the Key Laboratory of Meteorological Disaster of Ministry of Education at Nanjing University of Information Science and Technology。
文摘Over Antarctica,surface fluxes play an important role in the local atmospheric dynamical processes.To reveal the surface fluxes characteristics and aerodynamic and thermal roughness lengths over Zhongshan station,Antarctica,this paper analyzes the data observed at the station during 3 March 2008 through 15 February 2009.It is found that easterlies dominated this site throughout the whole year,with a maximum(average)speed of 25(5.6)m s−1 at 3.9 m height,and the annual maximum(minimum)surface temperature reached 291.05(230.05)K,while the annual maximum(minimum)air-specific humidity was 4.1(0.05)g/kg at 3.9 m height.The maximum(minimum)values of seasonal mean temperature,humidity,each radiation components,sensible and latent heat flux occurred in summer(winter),while for the seasonal averaged wind speed andτthe minimums(maximums)appeared in summer(autumn).After comparing with a partially linear regression method for aerodynamic roughness length and four previous equations that derive thermal roughness length from surface Reynolds number,constant values of aerodynamic roughness length as 3.6×10^(−3)m and thermal roughness length as 1.2×10^(−4)m at this site were validated by using the other three level observations and suggested for future studies.