The Effect of Lateral Offset Distance on the Aerodynamics and Fuel Economy of Vehicle Queues

The vehicle industry is always in search of breakthrough energy-saving and emission-reduction technologies.In recent years,vehicle intelligence has progressed considerably,and researchers are currently trying to take advantage of these developments.Here we consider the case of many vehicles forming a queue,i.e.,vehicles traveling at a predetermined speed and distance apart.While the majority of existing studies on this subject have focused on the influence of the longitudinal vehicle spacing,vehicle speed,and the number of vehicles on aerodynamic drag and fuel economy,this study considers the lateral offset distance of the vehicle queue.The group fuel consumption savings rate is calculated and analyzed.As also demonstrated by experimental results,some aerodynamic benefits exist.Moreover,the fuel consumption saving rate of the vehicle queue decreases as the lateral offset distance increases.

IMPROVED UVLM FOR FLAPPING-WING AERODYNAMICS COMPUTATION

To calculate the aerodynamics of flapping-wing micro air vehicle（MAV） with the high efficiency and the engineering-oriented accuracy,an improved unsteady vortex lattice method （UVLM） for MAV is proposed. The method considers the influence of instantaneous wing deforming in flapping,as well as the induced drag,additionally models the stretching and the dissipation of vortex rings,and can present the aerodynamics status on the wing surface. An implementation of the method is developed. Moreover,the results and the efficiency of the proposed method are verified by CFD methods. Considering the less time cost of UVLM,for application of UVLM in the MAV optimization,the influence of wake vortex ignoring time saving and precision is studied. Results show that saving in CPU time with wake vortex ignoring the appropriate distance is considerable while the precision is not significantly reduced. It indicates the potential value of UVLM in the optimization of MAV design.

Computational aerodynamics of low Reynolds number plunging,pitching and flexible wings for MAV applications

Micro air vehicles （MAV＇s） have the potential to revolutionize our sensing and information gathering capabilities in environmental monitoring and homeland security areas. Due to the MAV＇s＇ small size, flight regime, and modes of operation, significant scientific advancement will be needed to create this revolutionary capability. Aerodynamics, structural dynamics, and flight dynamics of natural flyers intersects with some of the richest problems in MAV＇s, inclu- ding massively unsteady three-dimensional separation, transition in boundary layers and shear layers, vortical flows and bluff body flows, unsteady flight environment, aeroelasticity, and nonlinear and adaptive control are just a few examples. A challenge is that the scaling of both fluid dynamics and structural dynamics between smaller natural flyer and practical flying hardware/lab experiment （larger dimension） is fundamentally difficult. In this paper, we offer an overview of the challenges and issues, along with sample results illustrating some of the efforts made from a computational modeling angle.

Wing kinematics measurement and aerodynamics of free-flight maneuvers in drone-flies

The time courses of wing and body kinematics of two free-flying drone-flies, as they performed saccades, were measured using 3D high-speed video, and the morpho- logical parameters of the wings and body of the insects were also measured. The measured wing kinematics was used in a Navier-Stokes solver to compute the aerodynamic forces and moments acting on the insects. The main results are as following. （1） The turn is mainly a 90° change of heading. It is made in about 10 wingbeats （about 55 ms）. It is of interest to note that the number of wingbeats taken to make the turn is approximately the same as and the turning time is only a little different from that of fruitflies measured recently by the same approach, even if the weight of the droneflies is more than 100 times larger than that of the fruitflies. The long axis of body is about 40° from the horizontal during the maneuver. （2） Although the body rotation is mainly about a vertical axis, a relatively large moment around the yaw axis （axis perpendicular to the long axis of body）, called as yaw moment, is mainly needed for the turn, because moment of inertial of the body about the yaw axis is much larger than that about the long axis. （3） The yaw moment is mainly pro- duced by changes in wing angles of attack： in a right turn, for example, the dronefly lets its right wing to have a rather large angle of attack in the downstroke （generally larger than 50°） and a small one in the upstroke to start the turn, and lets its left wing to do so to stop the turn, unlike the fruitflies who generate the yaw moment mainly by changes in the stroke plane and stroke amplitude.

A Rapid Analysis Tool for Aerodynamics/Aerothermodynamics of Hypersonic Vehicles

A rapid engineering surface panel method to analyze aerodynamics and aerothermodynamics of hypersonic vehicles is developed.To obtain the surface pressure distribution of a hypersonic vehicle,the local surface inclination method is applied to calculate the pressure coefficient for each surface panel element,of which the normal vector is corrected first by using an efficient data structure and Rey-casting algorithm,local Reynolds numbers are calculated according to the geometric streamline method,then the aerodynamic heating flux is computed by both reference enthalpy relations and Reynolds analogy method.Several typical test cases are performed and the results indicate that,the developed tool is effective in predicting the aerodynamics/aerothermodynamics for complex geometry of hypersonic vehicle in a wide range of Mach numbers with a sufficient accuracy.

A combined airfoil with secondary feather inspired by the golden eagle and its influences on the aerodynamics

Bird flight is a remarkable adaption that has allowed thousands of species to colonize all terrestrial habitats. A golden eagle has impressive flying abilities, such as hovering, perching, preying and attacking. To reveal the flying abilities, avian geometry of a golden eagle was extracted based on noncontact surface measurements using a ROMBER three-dimensional laser scanner. Distributions of a camber line, thickness and a secondary feather line of the extracted point cloud were fitted using convenient analytical expressions. A traditional airfoil was established with the camber line and thickness, then a combined airfoil was constructed by combining the traditional airfoil with a secondary feather. Oscillations of an airfoil as well as rapid pitch up were simplified as a sine wave around the quarter chord axis. Thereafter, both steady and unsteady aerodynamic performances of the airfoil are computed, the influences of the secondary feather on the steady and unsteady aerodynamics were further studied.

Aerodynamics of flexible wing in bees' hovering flight

The aerodynamics of 2-dimensional flexible wings in bees＇ normal hovering flight is studied. Four insect flapping flight coordinate systems, including a global system, a bodyfixed system, a rigid wing-fixed system and a flexible wingfixed system, are established to represent the insects＇ position, gesture, wing movement and wing deformation, respectively. Then the transformations among four coordinate systems are studied. It is found that the elliptic coordinate system can improve the computation accuracy and reduce the calculation complexity in a 2-dimensional rigid wing. The computation model of a 2-dimensional flexible wing is established, and the changes of the force, moment, and power are investigated. According to the computation results, the large lift and drag peaks at the beginning and end of the stroke can be explained by the superposition of the rapid translational acceleration, the fast pitching-up rotation and the Magnus effect; and the small force and drag peaks can be explained by the convex flow effect and the concave flow effect. Compared with the pressure force, pressure moment and translational power, the viscous force, viscous moment and rotational power are small and can be ignored.

A brief review on wind turbine aerodynamics

This article briefly reviews wind turbine aerodynamics, which follows an explanation of the aerodynamic complexity. The aerodynamic models including blade momentum theory, vortex wake model, dynamic stall and rotational effect, and their applications in wind turbine aerodynamic performance prediction are discussed and documented. Recent progress in computational fluid dynamics for wind turbine is addressed. Wind turbine aerodynamic experimental studies are also selectively introduced.

Aerodynamics analysis of a hypersonic electromagnetic gun launched projectile

A hypersonic aerodynamics analysis of an electromagnetic gun(EM gun) launched projectile configuration is undertaken in order to ameliorate the basic aerodynamic characteristics in comparison with the regular projectile layout.Static margin and pendulum motion analysis models have been applied to evaluate the flight stability of a new airframe configuration.With a steady state computational fluid dynamics(CFD) simulation,the basic density,pressure and velocity contours of the EM gun projectile flow field at Mach number 5.0,6.0 and 7.0(angle of attack=0°) have been analyzed.Furthermore,the static margin values are enhanced dramatically for the EM gun projectile with configuration optimization.Drag,lift and pitch property variations are all illustrated with the changes of Mach number and angle of attack.A particle ballistic calculation was completed for the pendulum analysis.The results show that the configuration optimized projectile,launched from the EM gun at Mach number 5.0 to 7.0,acts in a much more stable way than the projectiles with regular aerodynamic layout.

Unsteady aerodynamics modeling for flight dynamics application

In view of engineering application, it is practicable to decompose the aerodynamics into three components： the static aerodynamics, the aerodynamic increment due to steady rotations, and the aerodynamic increment due to unsteady separated and vortical flow. The first and the second components can be presented in conventional forms, while the third is described using a one-order differential equation and a radial-basis-function （RBF） network. For an aircraft configuration, the mathematical models of 6- component aerodynamic coefficients are set up from the wind tunnel test data of pitch, yaw, roll, and coupled yawroll large-amplitude oscillations. The flight dynamics of an aircraft is studied by the bifurcation analysis technique in the case of quasi-steady aerodynamics and unsteady aerodynam- ics, respectively. The results show that： （1） unsteady aerodynamics has no effect upon the existence of trim points, but affects their stability; （2） unsteady aerodynamics has great effects upon the existence, stability, and amplitudes of periodic solutions; and （3） unsteady aerodynamics changes the stable regions of trim points obviously. Furthermore, the dynamic responses of the aircraft to elevator deflections are inspected. It is shown that the unsteady aerodynamics is beneficial to dynamic stability for the present aircraft. Finally, the effects of unsteady aerodynamics on the post-stall maneuverability

Numerical Simulation Research of Loitering Munitions Aerodynamics

Aerodynamics of loitering munition is studied in this paper.The aerodynamic characteristics of loitering munition with non-circular body and body-airfoil-empennage combination are calculated numerically at Ma=0.4 based on multi-griddings patching technology,in the range of angle of attack-4°-10°,and the analytical results were compared with those from wind tunnel experiments,they show a good consistency.Analysis of the results showed that the normal force generated by non-circular cross-section missile increases with the angle of attack.At α≥6°,normal force achieved by missile body can take up to 10% of the total lift.Together with the lifting surface,the loitering munitions can provide a better lift to drag ratio,an improved weapon range and a good longitudinal stability.

Comparative Study of Machine Learning Modeling for Unsteady Aerodynamics

Modern fighters are designed to fly at high angle of attacks reaching 90 deg as part of their routine maneuvers.These maneuvers generate complex nonlinear and unsteady aerodynamic loading.In this study,different aerodynamic prediction tools are investigated to achieve a model which is highly accurate,less computational,and provides a stable prediction of associated unsteady aerodynamics that results from high angle of attack maneuvers.These prediction tools include Artificial Neural Networks(ANN)model,Adaptive Neuro Fuzzy Logic Inference System(ANFIS),Fourier model,and Polynomial Classifier Networks(PCN).Themain aim of the predictionmodel is to estimate the pitch moment and the normal force data obtained from forced tests of unsteady delta-winged aircrafts performing high angles of attack maneuvers.The investigation includes three delta wing models with 1,1.5,and 2 aspect ratios with four determined variables:change rate in angle of attack(0 to 90 deg),non-dimensional pitch rate(0 to.06),and angle of attack.Following a comprehensive analysis of the proposed identification methods,it was found that the newly proposed model of PCN showed the least error in modeling and prediction results.Based on prediction capabilities,it is seen that polynomial networks modeling outperformed ANFIS and ANN for the present nonlinear problem.

MULTI-OBJECTIVE SHAPE DESIGN IN AERODYNAMICS USING GAME STRATEGY

Multi-objective optimization for the optimum shape design is introduced in aerodynamics using the Game theory. Based on the control theory, the employed optimizer and the negative feedback are used to implement the constraints. All the constraints are satisfied implicitly and automatically in the design. Furthermore,the above methodology is combined with a formulation derived from the Game theory to treat multi-point airfoil optimization. Airfoil shapes are optimized according to various aerodynamics criteria. In the symmetric Nash game, each “player” is responsible for one criterion, and the Nash equilibrium provides a solution to the multipoint optimization. Design results confirm the efficiency of the method.

Numerical analysis of ice accretion effects at super-cooled large droplet conditions on airfoil aerodynamics

Changes in flow field around NACA23012 airfoil from a clean condition to a super-cooled large droplet （SLD） condition were simulated, and variations in aerodynamic parameters were calculated using FLUENT. In the case of numerical simulation for a clean airfoil, flow field characteristics simulated agreed well with theory analysis, indicating that turbulence models and parameters setting are feasible. Aerodynamic parameters for iced airfoil were calculated using the same method and agreed with those measured test data under the same environment in icing wind tunnels by S. Lee. Conclusion is made that the numerical simulation is valid, and it can be an alternative to study ice accretion effects at the SLD condition on airfoil aerodynamics, leading to reduction in research cycle time and cost.

Numerical analysis of the three-dimensional aerodynamics of a hovering rufous hummingbird(Selasphorus rufus)

Hummingbirds have a unique way of hover- ing. However, only a few published papers have gone into details of the corresponding three-dimensional vortex struc- tures and transient aerodynamic forces. In order to deepen the understanding in these two realms, this article presents an integrated computational fluid dynamics study on the hovering aerodynamics of a rufous hummingbird. The original morphological and kinematic data came from a former researcher＇s experiments. We found that conical and sta- ble leading-edge vortices （LEVs） with spanwise flow inside their cores existed on the hovering hummingbird＇s wing surfaces. When the LEVs and other near-field vortices were all shed into the wake after stroke reversals, periodically shed bilateral vortex rings were formed. In addition, a strong downwash was present throughout the flapping cycle. Time histories of lift and drag were also obtained. Combining the three-dimensional flow field and time history of lift, we believe that high lift mechanisms （i.e., rotational circulation and wake capture） which take place at stroke reversals in insect flight was not evident here. For mean lift throughout a whole cycle, it is calculated to be 3.60 g （104.0 % of the weight support）. The downstroke and upstroke provide 64.2 % and 35.8 % of the weight support, respectively.

Experimental Study of Owl-Like Airfoil Aerodynamics at Low Reynolds Numbers

This study experimentally investigates aerodynamic characteristics and flow fields of a smooth owl-like airfoil without serrations and velvet structures. This biologically inspired airfoil design is intended to serve as the main-wing for low-Reynolds-number aircrafts such as micro air vehicles. Reynolds number dependency on aerodynamics is also evaluated at low Reynolds numbers. The results of the study show that the owl-like airfoil has high lift performance with a nonlinear lift increase due to the presence of a separation bubble on the suction side. A distinctive flow feature of the owl airfoil is a separation bubble on the pressure side at low angles of attack. The separation bubble switches location from the pressure side to the suction side as the angle of attack increases and is continuously present on the surface within a wide range of angles of attack. The Reynolds number dependency on the lift curves is insignificant, although differences in the drag curves are especially pronounced at high angles of attack. Eventually, we obtain the geometric feature of the owl-like airfoil to increase aerodynamic performance at low Reynolds numbers.

Aerodynamics of the Cupped Wings during Peregrine Falcon’s Diving Flight

During a dive peregrine falcons can reach velocities of more than 320 km/h and makes themselves the fastest animals in the world. The aerodynamic mechanisms involved are not fully understood yet and the search for a conclusive answer to this fact motivates the three-dimensional (3-D) flow study. Especially the cupped wing configuration which is a unique feature of the wing shape in falcon peregrine dive is our focus herein. In particular, the flow in the gap between the main body and the cupped wing is studied to understand how this flow interacts with the body and to what extend it affects the integral forces of lift and drag. Characteristic shapes of the wings while diving are studied with regard to their aerodynamics using computational fluid dynamics (CFD). The results of the numerical simulations via ICEM CFD and OpenFOAM show predominant flow structures around the body surface and in the wake of the falcon model such as a pair of body vortices and tip vortices. The drag for the cupped wing profile is reduced in relation to the configuration of opened wings (without cupped-like profile) while lift is increased. The purpose of this study is primarily the basic research of the aerodynamic mechanisms during the falcon’s diving flight. The results could be important for maintaining good maneuverability at high speeds in the aviation sector.

Leakage of an eagle flight feather and its influence on the aerodynamics

We investigate how the barb of bird feathers is changed along both the rachis and barb.To investigate the microstructures and the mechanical behaviors of barbs,a series of barbs are manually cut from an eagle’s primary feather to observe the cross sections.Aλ-like cross section with a tiny hook is observed at the right feet at each section.Afterwards,a measurement of the setup system is developed to evaluate the leakage ratio of a feather followed by a numerical predicting approach based on the CFD method.It is found that the air leakage increases linearly against the pressure,and the predicted results coincide well with the experimental results.Finally,the influences of leakage of the flight feather on both steady and unsteady aerodynamics are studied.

Modeling Technique of the Aircraft Unsteady Aerodynamics Due to the Travelling Gust

The main equations for computing the unsteady aerodynamics of the aircraft undergoing the travelling gust are derived.Research and simulation on a specific example aircraft are performed,the results indicate that the modeling technique of the aircraft unsteady aerodynamics is correct,and it can meet the requirements due to the head⁃on and tail⁃on travelling gusts.

Novel Cylinder Movement Modeling Method Based on Aerodynamics

The cylinder movement is affected by multiple factors and it is difficult to establish the accurate movement model of the cylinder. In order to improve the reliability of the production line design and to speed up the production line debugging, a novel cylinder movement modeling method based on aerodynamics is proposed. The kinetic theory, thermodynamic theory and kinematics knowledge are applied and integrated various factors which affect the movement characteristics of the cylinder are considered. According to the proposed mathematical model of cylinder movement, thecombined simulation software of cylinder movement based on Visual Studio and Visual Component （3D Create） is developed to calculate thevelocity, accel- eration and movement time of the cylinders during the running of the assembly line. Comparison results of cylinder＇s movement time under different intake air and displacement show that the mathematical model of cylinder movement based on aerodynamic is more accurate and the degree of fittingis 0.9846, which proves the effectiveness of the combined simulation software of cylinder movement. By the cylinder movement modeling method based on aerodynamic, accurate value of takt and the debug parameters can be calculated as a reference for the designers and debuggers of the cylinder-driven assembly lines.