The most common reference electrode (RE) which is used in electrochemical measurements is the Ag/AgCl electrode. In this study, we present a novel solid-state Ag/AgCl planar electrode that was coated with a thin layer...The most common reference electrode (RE) which is used in electrochemical measurements is the Ag/AgCl electrode. In this study, we present a novel solid-state Ag/AgCl planar electrode that was coated with a thin layer of Graphite Oxide (GO) as a protective layer. The Ag/AgCl planar electrode was fabricated by using the photolithography and lift-off method combined with the Ag[NH3]2Cl complex. The GO was produced by Hummer’s method and was deposited on top of the Ag/AgCl layer by drop-casting method. The layers of the fabricated reference electrode were characterized by micro Raman spectroscopy, Scanning Electron Microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDX). The responding time of the planar electrode was short and the signal was more stable in comparison to the plainAg/AgCl electrode. The Open Circuit Potential (OCP) measurement with the fabricated electrode as the RE and the platinum electrode as the working electrode in electrolyte solutions which had various pH values was performed with a linear response in pH ranges from pH 5 to pH 8 and the linear correlation coefficient (R^2 = 0.9899). Moreover, the coating of the GO layers also enhanced the durability of the modified electrode. The results showed that the modified Ag/AgCl electrode with a thin layer GO as the protective layer could be used as plana REs for the potentiometric sensors.展开更多
Ag/AgCl electrode has been prepared using pressed powder techniques. In order to verify the feasibility of this type of electrode used as detecting electric field generated by vessels in seawater,its characteristics o...Ag/AgCl electrode has been prepared using pressed powder techniques. In order to verify the feasibility of this type of electrode used as detecting electric field generated by vessels in seawater,its characteristics of DC resistance,low frequency AC impedance,and receiving impedance in artificial seawater have been studied by polarization measurements,low frequency electrochemical impedance spectra,the open and short circuit cell conditions. The results show that the electrode can keep a low resistance when it responses the weak electrostatic field in seawater. The AC impedance of the electrode decreases as the frequency of the signal increasing. The receiving impedance decreases when the frequency of external field increases too. The valid detection bandwidth is determined by the properties of the impedance and the reactions occurring on the surface of the electrode.展开更多
We put forward a method of rapid preparation of chloride selective electrode(Ag/AgCl electrode) by dipping silver wire into sodium hypochlorite solution. The electrodes were prepared through different immersion time. ...We put forward a method of rapid preparation of chloride selective electrode(Ag/AgCl electrode) by dipping silver wire into sodium hypochlorite solution. The electrodes were prepared through different immersion time. The properties of the electrodes, such as Nernst response, response time and longterm stability, were tested in simulated concrete pore solutions(SCPS). Moreover, the surface morphology of the electrodes was also detected after immersion in solutions over three months. The experimental results reveal that the Ag/AgCl electrode with the fabrication time of 20 minutes(E-20) which is recommended to work as the chloride ion selective electrode has the best performance. Compared to that fabricated by the electrolytic process(E-EP), E-20 can be manufactured in mass. The method has almost the same good performance of Nernst response as E-EP, and has a better response time which is less than 25 seconds. The method also shows a better good long-term stability in SCPS containing chloride ions over three months.展开更多
Reference electrodes are a key part for corrosion monitoring and measurement of rebars in concrete. A reference electrode that can be buried in concrete is fabricated by using Ag/Ag Cl electrode and methyl cellulose g...Reference electrodes are a key part for corrosion monitoring and measurement of rebars in concrete. A reference electrode that can be buried in concrete is fabricated by using Ag/Ag Cl electrode and methyl cellulose gelling electrolyte. The stability, repeatability and anti-polarization of the reference electrode are investigated; the influences of the inner electrolyte loss, exterior OH- contamination, and temperature on the potential of the reference electrode are also investigated in this paper. The results show that the reference electrode has good stability, repeatability, and antipolarization. The influences of inner electrolyte loss, exterior OH- contamination, and temperature on the potential of the reference electrode are minimal. Therefore, it can be used for corrosion monitoring and measurement of rebars in concrete.展开更多
使用烧结法制备了Ag/AgCl固态不极化海洋电场电极,利用聚丙烯腈碳纤维T300制备了电容型海洋电场电极。研究了不极化电极和电容型电极探测海洋电场的原理,提出了两种电极的使用方法并研究了其探测性能。使用电化学工作站对两种电极进了...使用烧结法制备了Ag/AgCl固态不极化海洋电场电极,利用聚丙烯腈碳纤维T300制备了电容型海洋电场电极。研究了不极化电极和电容型电极探测海洋电场的原理,提出了两种电极的使用方法并研究了其探测性能。使用电化学工作站对两种电极进了循环伏安测量和电极对极差跟踪;使用低频低噪声放大器对两种电极的自噪声稳定速度和大小进行对比测量;在自制水槽中测试了两种电极在不同频率下的响应性能。试验结果表明两种电极均可测量1 m Hz以上的交变海洋电场;相比于Ag/AgCl电极,碳纤维电极具有极差小和自噪声稳定速度快的特点;稳定后两种电极的自噪声均为1 n V/√Hz@1 Hz。展开更多
文摘The most common reference electrode (RE) which is used in electrochemical measurements is the Ag/AgCl electrode. In this study, we present a novel solid-state Ag/AgCl planar electrode that was coated with a thin layer of Graphite Oxide (GO) as a protective layer. The Ag/AgCl planar electrode was fabricated by using the photolithography and lift-off method combined with the Ag[NH3]2Cl complex. The GO was produced by Hummer’s method and was deposited on top of the Ag/AgCl layer by drop-casting method. The layers of the fabricated reference electrode were characterized by micro Raman spectroscopy, Scanning Electron Microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDX). The responding time of the planar electrode was short and the signal was more stable in comparison to the plainAg/AgCl electrode. The Open Circuit Potential (OCP) measurement with the fabricated electrode as the RE and the platinum electrode as the working electrode in electrolyte solutions which had various pH values was performed with a linear response in pH ranges from pH 5 to pH 8 and the linear correlation coefficient (R^2 = 0.9899). Moreover, the coating of the GO layers also enhanced the durability of the modified electrode. The results showed that the modified Ag/AgCl electrode with a thin layer GO as the protective layer could be used as plana REs for the potentiometric sensors.
文摘Ag/AgCl electrode has been prepared using pressed powder techniques. In order to verify the feasibility of this type of electrode used as detecting electric field generated by vessels in seawater,its characteristics of DC resistance,low frequency AC impedance,and receiving impedance in artificial seawater have been studied by polarization measurements,low frequency electrochemical impedance spectra,the open and short circuit cell conditions. The results show that the electrode can keep a low resistance when it responses the weak electrostatic field in seawater. The AC impedance of the electrode decreases as the frequency of the signal increasing. The receiving impedance decreases when the frequency of external field increases too. The valid detection bandwidth is determined by the properties of the impedance and the reactions occurring on the surface of the electrode.
基金the National Key Technology Research and Development Program of the Ministry of Science and Technology of China(2015BAB07B04)the Natural Science Foundation of China(51278167)the Fundamental Research Funds for the Central Universities(2016B04514)
文摘We put forward a method of rapid preparation of chloride selective electrode(Ag/AgCl electrode) by dipping silver wire into sodium hypochlorite solution. The electrodes were prepared through different immersion time. The properties of the electrodes, such as Nernst response, response time and longterm stability, were tested in simulated concrete pore solutions(SCPS). Moreover, the surface morphology of the electrodes was also detected after immersion in solutions over three months. The experimental results reveal that the Ag/AgCl electrode with the fabrication time of 20 minutes(E-20) which is recommended to work as the chloride ion selective electrode has the best performance. Compared to that fabricated by the electrolytic process(E-EP), E-20 can be manufactured in mass. The method has almost the same good performance of Nernst response as E-EP, and has a better response time which is less than 25 seconds. The method also shows a better good long-term stability in SCPS containing chloride ions over three months.
基金financially supported by the National Science and Technology Support Program of China(Grant No.2011BAG07B04)
文摘Reference electrodes are a key part for corrosion monitoring and measurement of rebars in concrete. A reference electrode that can be buried in concrete is fabricated by using Ag/Ag Cl electrode and methyl cellulose gelling electrolyte. The stability, repeatability and anti-polarization of the reference electrode are investigated; the influences of the inner electrolyte loss, exterior OH- contamination, and temperature on the potential of the reference electrode are also investigated in this paper. The results show that the reference electrode has good stability, repeatability, and antipolarization. The influences of inner electrolyte loss, exterior OH- contamination, and temperature on the potential of the reference electrode are minimal. Therefore, it can be used for corrosion monitoring and measurement of rebars in concrete.
文摘通过浸涂法在钨金属丝上涂敷氧化钨氢离子敏感膜，制备了氧化钨H＋选择性电极，采用尿素改性聚乙烯醇作为参比电极的固态薄膜材料并进行KCl掺杂，经Nafion膜进行修饰后制备了固态参比电极.利用自制的氧化钨pH电极与固态参比电极制成pH电化学传感器，该传感器具有良好的响应电位E-pH线性函数关系，响应范围为pH2~pH11.响应灵敏度与氧化钨的热处理温度有关，200℃热处理后的响应灵敏度为52.81 mV/pH，响应时间与氧化钨敏感膜、测试溶液pH值以及溶液温度有关.在pH2→pH11→pH2循环测试过程中，传感器的滞后效应较小.该传感器有良好的选择性，响应行为不受Na＋、F-等常见离子的影响，但是受到氧化还原性的NO-3、I-等离子的干扰.传感器内阻很低为22.8 kΩ，远小于玻璃pH计的内阻（1×109Ω）.该传感器在各种饮料中具有较高测量精度，与玻璃pH计的测量值进行对比，两者的差值在（-0.06 pH，＋0.15pH）范围内.在10-5M→10-1M柠檬酸溶液中，传感器的响应电位与溶液浓度存在良好的线性关系，响应时间小于1 min.
文摘使用烧结法制备了Ag/AgCl固态不极化海洋电场电极,利用聚丙烯腈碳纤维T300制备了电容型海洋电场电极。研究了不极化电极和电容型电极探测海洋电场的原理,提出了两种电极的使用方法并研究了其探测性能。使用电化学工作站对两种电极进了循环伏安测量和电极对极差跟踪;使用低频低噪声放大器对两种电极的自噪声稳定速度和大小进行对比测量;在自制水槽中测试了两种电极在不同频率下的响应性能。试验结果表明两种电极均可测量1 m Hz以上的交变海洋电场;相比于Ag/AgCl电极,碳纤维电极具有极差小和自噪声稳定速度快的特点;稳定后两种电极的自噪声均为1 n V/√Hz@1 Hz。
