Late Mesozoic volcanic-subvolcanic rocks and related iron deposits, known as porphyry iron deposits in China, are widespread in the Ningwu ore district (Cretaceous basin) of the middle-lower Yangtze River polymetall...Late Mesozoic volcanic-subvolcanic rocks and related iron deposits, known as porphyry iron deposits in China, are widespread in the Ningwu ore district (Cretaceous basin) of the middle-lower Yangtze River polymetallic ore belt, East China. Two types of Late Mesozoic magmatic rocks are exposed: one is dioritic rocks closely related to iron mineralization as the hosted rock, and the other one is granodioritic (-granitic) rocks that cut the ore bodies. To understand the age of the iron mineralization and the ore-forming event, detailed zircon U-Pb dating and Hf isotope measurement were performed on granodioritic stocks in the Washan, Gaocun-Nanshan, Dongshan and Heshangqiao iron deposits in the basin. Four emplacement and crystallization (typically for zircons) ages of granodioritic rocks were measured as 126.1±0.5 Ma, 126.8±0.5 Ma, 127.3±0.5 Ma and 126.3±0.4 Ma, respectively in these four deposits, with the LA-MC-ICP-MS zircon U-Pb method. Based on the above results combined with previous dating, it is inferred that the iron deposits in the Ningwu Cretaceous basin occurred in a very short period of 131-127 Ma. In situ zircon Hf compositions of εHf(t) of the granodiorite are mainly from -3 to -8 and their corresponding 176Hf/177Hf ratio are from 0.28245 to 0.28265, indicating similar characteristics of dioritic rocks in the basin. We infer that granodioritic rocks occurring in the Ningwu ore district have an original relationship with dioritic rocks. These new results provide significant evidence for further study of this ore district so as to understand the ore-forming event in the study area.展开更多
The Tongling ore district is one of the most economically important ore areas in the Middle–Lower Yangtze River Metallogenic Belt, eastern China. It contains hundreds of polymetallic copper–gold deposits and occurre...The Tongling ore district is one of the most economically important ore areas in the Middle–Lower Yangtze River Metallogenic Belt, eastern China. It contains hundreds of polymetallic copper–gold deposits and occurrences. Those deposits are mainly clustered(from west to east) within the Tongguanshan, Shizishan, Xinqiao, Fenghuangshan, and Shatanjiao orefields. Until recently, the majority of these deposits were thought to be skarn-or porphyry–skarn-type deposits; however there have been recent discoveries of numerous vein-type Au, Ag, and Pb-Zn deposits that do not fall into either of these categories. This indicates that there is some uncertainty over this classification. Here, we present the results of several systematic geological studies of representative deposits in the Tongling ore district. From investigation of the ore-controlling structures, lithology of the host rock, mineral assemblages, and the characteristics of the mineralization and alteration within these deposits, three genetic types of deposits(skarn-, porphyry-, and vein-type deposits) have been identified. The spatial and temporal relationships between the orebodies and Yanshanian intrusions combined with the sources of the ore-forming fluids and metals, as well as the geodynamic setting of this ore district, indicate that all three deposit types are genetically related each other and constitute a magmatic–hydrothermal system. This study outlines a model that relates the polymetallic copper–gold porphyry-, skarn-, and vein-type deposits within the Tongling ore district. This model provides a theoretical basis to guide exploration for deep-seated and concealed porphyry-type Cu(–Mo, –Au) deposits as well as shallow vein-type Au, Ag, and Pb–Zn deposits in this area and elsewhere.展开更多
The Lanping Basin in the Nujiang-Lancangjiang-Jinshajiang (the Sanjiang) area of northeastern margin of the Tibetan Plateau is an important part of eastern Tethyan metallogenic domain. This basin hosts a number of l...The Lanping Basin in the Nujiang-Lancangjiang-Jinshajiang (the Sanjiang) area of northeastern margin of the Tibetan Plateau is an important part of eastern Tethyan metallogenic domain. This basin hosts a number of large unique sediment-hosted Pb-Zn polymetallic deposits or ore districts, such as the Baiyangping ore concentration area which is one of the representative ore district. The Baiyangping ore concentration area can be divided into the east and west ore belts, which were formed in a folded tectogene of the India-Asia continental coUisional setting and was controlled by a large reverse fault. Field observations reveal that the Mesozoic and Cenozoic sedimentary strata were outcropped in the mining area, and that the orebodies are obviously controlled by faults and hosted in sandstone and carbonate rocks. However, the oreforming elements in the east ore belt are mainly Pb-Zn -Sr-Ag, while Pb-Zn-Ag-Cu-Co elements are dominant in the west ore belt. Comparative analysis of the C-O-Sr-S-Pb isotopic compositions suggest that both ore belts had a homogeneous carbon source, and the carbon in hydrothermal calcite is derived from the dissolution of carbonate rock strata; the ore- forming fluids were originated from formation water and precipitate water, which belonged to basin brine fluid system; sulfur was from organic thermal chemical sulfate reduction and biological sulfate reduction; the metal mineralization material was from sedimentary strata and basement, but the difference of the material source of the basement and the strata and the superimposed mineralization of the west ore belt resulted in the difference of metallogenic elements between the eastern and western metallogenic belts. The Pb-Zn mineralization age of both ore belts was contemporary and formed in the same metaliogenetic event. Both thrust formed at the same time and occurred at the Early Oligocene, which is consistent with the age constrained by field geological relationship.展开更多
The Dongfengnanshan Cu polymetallic deposit is one representative deposit of the Tianbaoshan ore district in the Yanbian area, northeast(NE) China. There occur two types of ore bodies in this deposit, the stratiform o...The Dongfengnanshan Cu polymetallic deposit is one representative deposit of the Tianbaoshan ore district in the Yanbian area, northeast(NE) China. There occur two types of ore bodies in this deposit, the stratiform ore bodies and veintype ones, controlled by the Early Permian strata and the Late Hercynian diorite intrusion, respectively. Due to the ambiguous genetic type of the stratiform ore bodies, there has been controversy on the relationship between them and veintype ore bodies. To determine the genetic type of stratiform ore bodies, laser ablation inductively coupled plasma mass spectrometry(LA-ICP-MS) in situ trace elements and S–Pb isotope analysis have been carried on the sulfides in the stratiform ore bodies. Compared with that in skarn, Mississippi Valley-type(MVT), and epithermal deposits, sphalerite samples in the stratiform ore bodies of the Dongfengnanshan deposit are significantly enriched in Fe, Mn, and In, while depleted in Ga, Ge, and Cd, which is similar to the sphalerite in volcanic-associated massive sulfide(VMS) deposits. Co/Ni ratio of pyrrhotites in the stratiform ore bodies is similar to that in VMS-type deposits. The concentrations of Zn and Cd of chalcopyrites are similar to those of recrystallized VMS-type deposits. These characteristics also reflect the intermediate ore-forming temperature of the stratiform ore bodies in this deposit. Sulfur isotope compositions of sulfides are similar to those of VMS-type deposits, reflecting that sulfur originated from the Permian Miaoling Formation. Lead isotope compositions indicate mixed-source for lead. Moreover, the comparison of the Dongfengnanshan stratiform ore bodies with some VMStype deposits in China and abroad, on the trace elements and S–Pb isotope characteristics of the sulfides reveals that the stratiform ore bodies of the Dongfengnanshan deposit belong to the VMS-type, and have closely genetic relationship with the early Permian marine volcanic sedimentary rocks.展开更多
Based on the mineralogical characterization for the polymetallic sulfide ore, the way to improve silver recovery was studied. The results showed that silver was the most valuable metal whose grade was 448.82 g/t Ag, w...Based on the mineralogical characterization for the polymetallic sulfide ore, the way to improve silver recovery was studied. The results showed that silver was the most valuable metal whose grade was 448.82 g/t Ag, while 0.118% Cu, 1.65% Pb and 1.06% Zn may be comprehensively utilizated. The main silver-bearing minerals were argent and aregentite which accounted for 87.18% of total silver. Argentite and other metal minerals were distributed in the gangue minerals in complex forms. Argentite grains of 33.76% minus 50 μm indicated that a fine grinding scheme was necessary to enhance the degree of dissociation, and meanwhile selective grinding must be considered to prevent a complete grinding of coarse grains. The optimum regrinding fineness in the Cu flotation was determined as 73% minus 37 μm, while grains of 68.5% minus 74 μm in one-stage grinding remained unchanged as much as possible. Consequently, silver recovery increased to 2.68%, as well as the content of Pb simultaneously decreased from 7.26% to 2.68% in the Cu concentrate. From the lead pyrometallurgical point of view, recovering larger amounts of silver and lead at the expense of decreasing the grade of lead to a suitable level is not only economically viable for the plant, but also convenient for subsequent processing. Silver and lead recovery increased to 13.18% and 12.58%, respectively, while the Pb grade decreased from 53.1% to 46.12% for the Pb concentrate.展开更多
Zhashui Ag-Pb polymetallic ore deposit is located in northern Qinling geosyncline. In this paper, its geological features and metallogenic background are introduced. The volcanic dynamics,physical-chemical conditions ...Zhashui Ag-Pb polymetallic ore deposit is located in northern Qinling geosyncline. In this paper, its geological features and metallogenic background are introduced. The volcanic dynamics,physical-chemical conditions of metallogeny and ore-forming experimental simulation are discussed in detail. Based on the existence of paleovolcanic activity, the protolith characters and geochemistry of ore-bearing rock series, the authors study the law of volcanic activity in Middle Devonian period. The Physical-chemical conditions of metallogeny. including temperature, pressure, pH and Eh of mineralizing solution, are also determined. The evolution of salinity, f(O2), pH, M (H2S), M(SO2-4) (M is mole fraction of certain component ), t (temperature) and a(ionic activity)of mineralizing solution suggests that the mineralization was a long-term dynamic process. Finally, the metallogenic pattern is established.展开更多
The discovery of Gonghe County Haergeng tungsten polymetallic deposit is one of the most important tungsten deposits discovered in Qinghai Province in recent years.It has important theoretical and practicalsignificanc...The discovery of Gonghe County Haergeng tungsten polymetallic deposit is one of the most important tungsten deposits discovered in Qinghai Province in recent years.It has important theoretical and practicalsignificance.1 Regional geological background The research area lies in the northwest edge of展开更多
The Dachang tin polymetallic ore field in northern Guangxi, China, lies in a mid late Paleozoic rift that borders up the southern boundary of the Jiangnan Xuefeng Massif. As a giant ore deposit, it deposited in middle...The Dachang tin polymetallic ore field in northern Guangxi, China, lies in a mid late Paleozoic rift that borders up the southern boundary of the Jiangnan Xuefeng Massif. As a giant ore deposit, it deposited in middle of the Nandang Hechi metallogenic zone. The ore hosting strata are of the Devonion, which shows the evident characteristics of polymetallic elements, i.e., Sn, Zn, Pb, Sb, As, Cu, Ag, In, Ge, Cd, et al., and over 1 000 000 t tin reserves.展开更多
The Lamasu copper polymetallic mineralized region lies in the south of Wenquan County, Xinjiang and in the Northwest lakeside of the Sailimu Lake. Seen from the geotectonic position, it belongs to North Tianshan geodo...The Lamasu copper polymetallic mineralized region lies in the south of Wenquan County, Xinjiang and in the Northwest lakeside of the Sailimu Lake. Seen from the geotectonic position, it belongs to North Tianshan geodome system, Tianshan diwa region, Central Asian crustobody. Copper and zinc polymetallic ore bodies had been formed in the skarn of the contact, between the metamophic carbonate rocks of the Kuximqiek Group, Jixian System and early mid Varisean acidic rockbodies. The formation of the ore deposit was the result of the successive activities of the crust and mantle and the tectonic and magmatic activities.展开更多
The Gejiu (个旧) deposit is a superlarge tin-copper polymetallic ore-forming concentration area characterized by excellent metallogenic geological settings and advantageous ore-controlling factors. The deposit displ...The Gejiu (个旧) deposit is a superlarge tin-copper polymetallic ore-forming concentration area characterized by excellent metallogenic geological settings and advantageous ore-controlling factors. The deposit displays diverse mineralization properties due to different minerals and mineral deposit types. Based on the principal metallogenic factors, metallogenic mechanisms, mineralized components, and occurrence of mineral deposits or ore bodies, the Gejiu mineral district can be divided into 2 combinations of metallogenic series, 4 metallogenic series, 8 subseries, and 27 mineral deposit types. Spatial zonality is evident. The distribution regularity of the elements in both plane and section is Be-W, Sn (Cu, Mo, Bi, Be)-Sn, Pb, Ag-Pb, Zn around a granitic intrusion. The metallogenic epoch is mainly concentrated in the late Yanshanian. During this period, large-scale metallogenic processes related to movement caused by tectonics and magmatism occurred, and a series of magmatic hydrothermal deposits formed. The ore-forming processes can be divided into 4 stages: the silicate stage, the oxide stage, the sulphide stage, and the carbonate stage. Based on the orderliness and diversity (in terms of time, space, and genesis) of the mineralization, the authors have developed a comprehensive spectrum of ore deposits in the Gejiu area. This newly proposed diversity of mineralization and the spectrum developed in this work are useful not only for interpreting the genesis of the Gejiu deposit but also for improving mineral exploration in the area, and in particular, for finding large deposits.展开更多
This paper is based on the analysis and research on the silver-lead-zinc polymetallic ore in New Ballyhoo Banner in southern Manzhouli of Inner Mongolia.Because metal mineralization brings rock formations,the geophysi...This paper is based on the analysis and research on the silver-lead-zinc polymetallic ore in New Ballyhoo Banner in southern Manzhouli of Inner Mongolia.Because metal mineralization brings rock formations,the geophysical features such as low resistivity,high polarization rate and uneven distribution of magnetization,the comprehensive geophysical methods are adopted including high-precision magnetic measurement,high-power induced polarization,IP field middle gradient and controlled source audio-frequency magnetotellurics.In the survey work of multi-metal ore deposits,from surface sweeping to single point measurement,and from single point to section going deeper layer by layer,the resolution of measurement is continuously improved,and various geophysical methods support and complement each other,so explorers can successfully predict the direction,scale and volume of the metallogenic belts in conjunction with geochemical exploration,geological survey and drilling.It has provided a strong basis for completing the exploration task of predicting the reserve volume of ore bodies.The research conclusions of this exploration case have thus a high reference value in the same type of exploration work.展开更多
The Shizhuyuan W,Sn,Mo and Bi polymetallic ore deposit is one of the world famous superlarge ore deposits.The paper briefly introduced the geological setting and features of the ore deposit.Further,an ore- forming mo...The Shizhuyuan W,Sn,Mo and Bi polymetallic ore deposit is one of the world famous superlarge ore deposits.The paper briefly introduced the geological setting and features of the ore deposit.Further,an ore- forming model was put forward at the end of the paper.展开更多
It is a new attempt to study thermal evolution related to mineralization using the fission track (FT) method. Apatite and zircon fission track data are reported for 6 samples collected from Jiama ore district as well ...It is a new attempt to study thermal evolution related to mineralization using the fission track (FT) method. Apatite and zircon fission track data are reported for 6 samples collected from Jiama ore district as well as its periphery. The FT ages of apatites in the ore district are (16.1±0.9) Ma and (18.8±1.1) Ma and reflect the age of late period of hydrothermal mineralizing event. Apatite FT age of (22.0±4.3) Ma and zircon FT age of (20.9±2.0) Ma are related to the early period of mineralization. Another zircon FT age of (341.6±79.1) Ma, inheriting mineral source characteristic, has no connection with the mineralization. Based on the thermal history analysis, the mineralization began before 25-22 Ma. Cooling rate in the ore district is 5-6℃/Ma averagely, in which a slow cooling occurred at 90-80℃. About 2.7 km has been denuded and the denudation rate is higher than the uplifting rate.展开更多
Recently,Guangdong Development and Reform Commission released Guangdong 2019 Key Construction Projects Plan,which consists of 1170provincial-level key projects and 628 provinciallevel key preparatory projects of which...Recently,Guangdong Development and Reform Commission released Guangdong 2019 Key Construction Projects Plan,which consists of 1170provincial-level key projects and 628 provinciallevel key preparatory projects of which the preliminary work is being carried out.'Rubidium Tin Polymetallic Ore Exploring Project of Tiantangshan Mine Area,Mabugang,Longchuan County,Guangdong”owned by Guangdong Guangding Mining Group was selected into this Plan.展开更多
We performed a systematic trace and rare earth element analysis for the bedded Fe-Mn carbonate rocks related to the stratiform Ag-Pb-Zn mineralization in the Lengshuikeng ore district, Jiangxi Province, South China. T...We performed a systematic trace and rare earth element analysis for the bedded Fe-Mn carbonate rocks related to the stratiform Ag-Pb-Zn mineralization in the Lengshuikeng ore district, Jiangxi Province, South China. Three types of Fe-Mn carbonates are distinguished, namely, the massive, breccia, and vein types. Both carbonate and silicate fractions in the samples are analyzed for their trace and rare earth element concentrations using a step acid-leaching technique. Our results show that the carbonate fractions in the massive type samples have the lowest REE concentrations but pronounced positive Eu and Y anomalies with Eu/Eu* value from 1.3 to 6.2 and Y/Ho value from 40.1 to 59.5, and similar characteristics are also shown for the silicate fractions in the massive type samples(Eu/Eu*=1.0-6.7, Y/Ho=20.7-55.1). These REE characteristics are similar to those of Sedex type massive sulfide deposits worldwide, and we suggest that the massive type Fe-Mn carbonate rocks were likely formed from an exhalative volcanic-hydrothermal fluid feeding the depression basin of a volcanic lake. The high concentrations of redox-sensitive elements and ratios such as U/Th, V/Cr and V/(V+Ni) indicate a dysoxic environment for the Fe-Mn carbonate deposition. In contrast, the breccia type and vein type Fe-Mn carbonate samples show different trace and rare earth element features from those of massive type samples, and they are more similar to the volcanic rocks and magmatic-hydrothermal fluids in the Lengshuikeng ore district and may reflect strong overprinting from volcanic and sub-volcanic magmatism related to the porphyry type mineralization in the district.展开更多
Hyperspectral remote sensing technology is widely used to detect element contents because of its multiple bands,high resolution,and abundant information.Although researchers have paid considerable attention to selecti...Hyperspectral remote sensing technology is widely used to detect element contents because of its multiple bands,high resolution,and abundant information.Although researchers have paid considerable attention to selecting the optimal bandwidth for the hyperspectral inversion of metal element contents in rocks,the influence of bandwidth on the inversion accuracy are ignored.In this study,we collected 258 rock samples in and near the Kalatage polymetallic ore concentration area in the southwestern part of Hami City,Xinjiang Uygur Autonomous Region,China and measured the ground spectra of these samples.The original spectra were resampled with different bandwidths.A Partial Least Squares Regression(PLSR)model was used to invert Cu contents of rock samples and then the influence of different bandwidths on Cu content inversion accuracy was explored.According to the results,the PLSR model obtains the highest Cu content inversion accuracy at a bandwidth of 35 nm,with the model determination coefficient(R^(2))of 0.5907.The PLSR inversion accuracy is relatively unaffected by the bandwidth within 5-80 nm,but the accuracy decreases significantly at 85 nm bandwidth(R^(2)=0.5473),and the accuracy gradually decreased at bandwidths beyond 85 nm.Hence,bandwidth has a certain impact on the inversion accuracy of Cu content in rocks using the PLSR model.This study provides an indicator argument and theoretical basis for the future design of hyperspectral sensors for rock geochemistry.展开更多
Located in Luoning County,western Henan Province,Central China,the Zhonghe Ag-Pb-Zn ore field,is a newly discovered deposit in the Xiaoshan District.Ore bodies controlled by NNW Faults occur as veins within the Paleop...Located in Luoning County,western Henan Province,Central China,the Zhonghe Ag-Pb-Zn ore field,is a newly discovered deposit in the Xiaoshan District.Ore bodies controlled by NNW Faults occur as veins within the Paleoproterozoic Xiong’er Group or the Early Cretaceous porphyritic granite.Given that the Zhonghe deposit has been covered by thick Quaternary sediments,the paragenetic mineral assemblage was determined mainly by microscopic observations,including the quartzsiderite-pyrite alteration (StageⅠ),polymetallic sulfide precipitation (StageⅡ),silver mineralization(Stage Ⅲ),and quartz-carbonate stage (StageⅣ).The host minerals for silver are diverse,such as freibergite,pyrargyrite,polybasite,argyrodite,canfieldite,argentite,and native silver,whereas those for Pb and Zn are galena and sphalerite,respectively.In order to constrain the ore-forming components of the Zhonghe deposit,a combined in-situ analysis was conducted on represented sulfides from StageⅡand Stage Ⅲ.In-situ δ^(34)S values of the analyzed sulfides,including the pyrite,chalcopyrite,sphalerite,and galena,display a relatively narrow range (0.90‰-5.0‰),which is close to magmatic sulfur source.The ^(206)Pb/^(204)Pb and^(207)Pb/^(204)Pb ratios show a narrow range (17.140-17.360 and 15.385-15.490),whereas the ^(208)Pb/^(204)Pb ratios exhibit a broad variation (36.601-37.943),indicating a contamination of the Xiong’er Group.Synthesis of geochronological and geochemical data from the Xiaoshan District,we contend that the ore-forming materials of the Zhonghe Ag-Pb-Zn deposit are originated from the lower crust,which has presumably been influenced by the large-scale lithospheric delamination of the eastern North China Craton during the Early Cretaceous.In consideration of the geological setting,mineralogy,and geochemical compositions,we suggest that the Zhonghe Ag-Pb-Zn deposit is characterized as intermediate sulfidation type epithermal deposit,and may be a potential exploration target for porphyry Mo-Cu deposits.展开更多
Fault and fractures are well-developed in the Gejiu tin-polymetallic district,and they are closely related to the formation and distribution of ores.In this paper,the principal component analysis(PCA)and multifractal ...Fault and fractures are well-developed in the Gejiu tin-polymetallic district,and they are closely related to the formation and distribution of ores.In this paper,the principal component analysis(PCA)and multifractal singular value decomposition(MSVD)methodologies were applied for identification of the ore-forming anomaly components from element concentrations of fault rocks in the Laochang ore field,Gejiu.The results show that:(1)the wall rocks and fault rocks have anomalous concentrations of ore-forming elements,indicating that these elements are mainly derived from fluid/rock interaction in the fracture zones;(2)PCA based on clr-transformed data was used to recognize significant association anomalies of ore-forming elements,which lay a foundation for further extracting ore-forming anomaly components from the element association anomalies related to Sn-Cu mineralization;(3)MSVD could effectively explore local anomaly features and decompose ore-forming element association anomalies associated with buried mineralization in more detail.The ore-forming element anomaly components can delineate ore-finding Sn-Cu polymetallic deposits more exactly than the ore-forming element association anomalies.展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 40930419)the National Special Research Programs for Non-Profit Trades (Sponsored by MLR, Grant Nos. 200911007 and 200811114)Open Foundation of State Key laboratory of Geological Processes and Mineral Resources, School of the Earth Sciences and Resources, China University of Geosciences, Beijing (Grant No. GPMR201029)
文摘Late Mesozoic volcanic-subvolcanic rocks and related iron deposits, known as porphyry iron deposits in China, are widespread in the Ningwu ore district (Cretaceous basin) of the middle-lower Yangtze River polymetallic ore belt, East China. Two types of Late Mesozoic magmatic rocks are exposed: one is dioritic rocks closely related to iron mineralization as the hosted rock, and the other one is granodioritic (-granitic) rocks that cut the ore bodies. To understand the age of the iron mineralization and the ore-forming event, detailed zircon U-Pb dating and Hf isotope measurement were performed on granodioritic stocks in the Washan, Gaocun-Nanshan, Dongshan and Heshangqiao iron deposits in the basin. Four emplacement and crystallization (typically for zircons) ages of granodioritic rocks were measured as 126.1±0.5 Ma, 126.8±0.5 Ma, 127.3±0.5 Ma and 126.3±0.4 Ma, respectively in these four deposits, with the LA-MC-ICP-MS zircon U-Pb method. Based on the above results combined with previous dating, it is inferred that the iron deposits in the Ningwu Cretaceous basin occurred in a very short period of 131-127 Ma. In situ zircon Hf compositions of εHf(t) of the granodiorite are mainly from -3 to -8 and their corresponding 176Hf/177Hf ratio are from 0.28245 to 0.28265, indicating similar characteristics of dioritic rocks in the basin. We infer that granodioritic rocks occurring in the Ningwu ore district have an original relationship with dioritic rocks. These new results provide significant evidence for further study of this ore district so as to understand the ore-forming event in the study area.
基金funded by the National Natural Science Foundation of China(NSFC)(grant numbers 41472066,40972063 and 41672038)the Program of the Deep Exploration in China(SinoProb-03-05)+1 种基金the National KeyR&S Program of China(2016 YFC0600209)the Land and Resources Science and Techonolgy Foundation of Anhui Province(2016-K-03 and No.2014-K-03)
文摘The Tongling ore district is one of the most economically important ore areas in the Middle–Lower Yangtze River Metallogenic Belt, eastern China. It contains hundreds of polymetallic copper–gold deposits and occurrences. Those deposits are mainly clustered(from west to east) within the Tongguanshan, Shizishan, Xinqiao, Fenghuangshan, and Shatanjiao orefields. Until recently, the majority of these deposits were thought to be skarn-or porphyry–skarn-type deposits; however there have been recent discoveries of numerous vein-type Au, Ag, and Pb-Zn deposits that do not fall into either of these categories. This indicates that there is some uncertainty over this classification. Here, we present the results of several systematic geological studies of representative deposits in the Tongling ore district. From investigation of the ore-controlling structures, lithology of the host rock, mineral assemblages, and the characteristics of the mineralization and alteration within these deposits, three genetic types of deposits(skarn-, porphyry-, and vein-type deposits) have been identified. The spatial and temporal relationships between the orebodies and Yanshanian intrusions combined with the sources of the ore-forming fluids and metals, as well as the geodynamic setting of this ore district, indicate that all three deposit types are genetically related each other and constitute a magmatic–hydrothermal system. This study outlines a model that relates the polymetallic copper–gold porphyry-, skarn-, and vein-type deposits within the Tongling ore district. This model provides a theoretical basis to guide exploration for deep-seated and concealed porphyry-type Cu(–Mo, –Au) deposits as well as shallow vein-type Au, Ag, and Pb–Zn deposits in this area and elsewhere.
基金granted by the National Natural Science Foundation of China(grants No.41302067,41472067 and 41403043)the Fundamental Research Funds of Chinese Academy of Geological Sciences(grant No.YYWF201614 and 09 program of Institute of Geomechanics)IGCP/SIDA–600,and China Geological Survey(grant No.DD20160053)
文摘The Lanping Basin in the Nujiang-Lancangjiang-Jinshajiang (the Sanjiang) area of northeastern margin of the Tibetan Plateau is an important part of eastern Tethyan metallogenic domain. This basin hosts a number of large unique sediment-hosted Pb-Zn polymetallic deposits or ore districts, such as the Baiyangping ore concentration area which is one of the representative ore district. The Baiyangping ore concentration area can be divided into the east and west ore belts, which were formed in a folded tectogene of the India-Asia continental coUisional setting and was controlled by a large reverse fault. Field observations reveal that the Mesozoic and Cenozoic sedimentary strata were outcropped in the mining area, and that the orebodies are obviously controlled by faults and hosted in sandstone and carbonate rocks. However, the oreforming elements in the east ore belt are mainly Pb-Zn -Sr-Ag, while Pb-Zn-Ag-Cu-Co elements are dominant in the west ore belt. Comparative analysis of the C-O-Sr-S-Pb isotopic compositions suggest that both ore belts had a homogeneous carbon source, and the carbon in hydrothermal calcite is derived from the dissolution of carbonate rock strata; the ore- forming fluids were originated from formation water and precipitate water, which belonged to basin brine fluid system; sulfur was from organic thermal chemical sulfate reduction and biological sulfate reduction; the metal mineralization material was from sedimentary strata and basement, but the difference of the material source of the basement and the strata and the superimposed mineralization of the west ore belt resulted in the difference of metallogenic elements between the eastern and western metallogenic belts. The Pb-Zn mineralization age of both ore belts was contemporary and formed in the same metaliogenetic event. Both thrust formed at the same time and occurred at the Early Oligocene, which is consistent with the age constrained by field geological relationship.
基金supported by the National Natural Science Foundation of China (NSFC) (No. 41772062)
文摘The Dongfengnanshan Cu polymetallic deposit is one representative deposit of the Tianbaoshan ore district in the Yanbian area, northeast(NE) China. There occur two types of ore bodies in this deposit, the stratiform ore bodies and veintype ones, controlled by the Early Permian strata and the Late Hercynian diorite intrusion, respectively. Due to the ambiguous genetic type of the stratiform ore bodies, there has been controversy on the relationship between them and veintype ore bodies. To determine the genetic type of stratiform ore bodies, laser ablation inductively coupled plasma mass spectrometry(LA-ICP-MS) in situ trace elements and S–Pb isotope analysis have been carried on the sulfides in the stratiform ore bodies. Compared with that in skarn, Mississippi Valley-type(MVT), and epithermal deposits, sphalerite samples in the stratiform ore bodies of the Dongfengnanshan deposit are significantly enriched in Fe, Mn, and In, while depleted in Ga, Ge, and Cd, which is similar to the sphalerite in volcanic-associated massive sulfide(VMS) deposits. Co/Ni ratio of pyrrhotites in the stratiform ore bodies is similar to that in VMS-type deposits. The concentrations of Zn and Cd of chalcopyrites are similar to those of recrystallized VMS-type deposits. These characteristics also reflect the intermediate ore-forming temperature of the stratiform ore bodies in this deposit. Sulfur isotope compositions of sulfides are similar to those of VMS-type deposits, reflecting that sulfur originated from the Permian Miaoling Formation. Lead isotope compositions indicate mixed-source for lead. Moreover, the comparison of the Dongfengnanshan stratiform ore bodies with some VMStype deposits in China and abroad, on the trace elements and S–Pb isotope characteristics of the sulfides reveals that the stratiform ore bodies of the Dongfengnanshan deposit belong to the VMS-type, and have closely genetic relationship with the early Permian marine volcanic sedimentary rocks.
基金Funded by the National Natural Science Foundation of China(No.51374247)
文摘Based on the mineralogical characterization for the polymetallic sulfide ore, the way to improve silver recovery was studied. The results showed that silver was the most valuable metal whose grade was 448.82 g/t Ag, while 0.118% Cu, 1.65% Pb and 1.06% Zn may be comprehensively utilizated. The main silver-bearing minerals were argent and aregentite which accounted for 87.18% of total silver. Argentite and other metal minerals were distributed in the gangue minerals in complex forms. Argentite grains of 33.76% minus 50 μm indicated that a fine grinding scheme was necessary to enhance the degree of dissociation, and meanwhile selective grinding must be considered to prevent a complete grinding of coarse grains. The optimum regrinding fineness in the Cu flotation was determined as 73% minus 37 μm, while grains of 68.5% minus 74 μm in one-stage grinding remained unchanged as much as possible. Consequently, silver recovery increased to 2.68%, as well as the content of Pb simultaneously decreased from 7.26% to 2.68% in the Cu concentrate. From the lead pyrometallurgical point of view, recovering larger amounts of silver and lead at the expense of decreasing the grade of lead to a suitable level is not only economically viable for the plant, but also convenient for subsequent processing. Silver and lead recovery increased to 13.18% and 12.58%, respectively, while the Pb grade decreased from 53.1% to 46.12% for the Pb concentrate.
文摘Zhashui Ag-Pb polymetallic ore deposit is located in northern Qinling geosyncline. In this paper, its geological features and metallogenic background are introduced. The volcanic dynamics,physical-chemical conditions of metallogeny and ore-forming experimental simulation are discussed in detail. Based on the existence of paleovolcanic activity, the protolith characters and geochemistry of ore-bearing rock series, the authors study the law of volcanic activity in Middle Devonian period. The Physical-chemical conditions of metallogeny. including temperature, pressure, pH and Eh of mineralizing solution, are also determined. The evolution of salinity, f(O2), pH, M (H2S), M(SO2-4) (M is mole fraction of certain component ), t (temperature) and a(ionic activity)of mineralizing solution suggests that the mineralization was a long-term dynamic process. Finally, the metallogenic pattern is established.
文摘The discovery of Gonghe County Haergeng tungsten polymetallic deposit is one of the most important tungsten deposits discovered in Qinghai Province in recent years.It has important theoretical and practicalsignificance.1 Regional geological background The research area lies in the northwest edge of
文摘The Dachang tin polymetallic ore field in northern Guangxi, China, lies in a mid late Paleozoic rift that borders up the southern boundary of the Jiangnan Xuefeng Massif. As a giant ore deposit, it deposited in middle of the Nandang Hechi metallogenic zone. The ore hosting strata are of the Devonion, which shows the evident characteristics of polymetallic elements, i.e., Sn, Zn, Pb, Sb, As, Cu, Ag, In, Ge, Cd, et al., and over 1 000 000 t tin reserves.
文摘The Lamasu copper polymetallic mineralized region lies in the south of Wenquan County, Xinjiang and in the Northwest lakeside of the Sailimu Lake. Seen from the geotectonic position, it belongs to North Tianshan geodome system, Tianshan diwa region, Central Asian crustobody. Copper and zinc polymetallic ore bodies had been formed in the skarn of the contact, between the metamophic carbonate rocks of the Kuximqiek Group, Jixian System and early mid Varisean acidic rockbodies. The formation of the ore deposit was the result of the successive activities of the crust and mantle and the tectonic and magmatic activities.
文摘The Gejiu (个旧) deposit is a superlarge tin-copper polymetallic ore-forming concentration area characterized by excellent metallogenic geological settings and advantageous ore-controlling factors. The deposit displays diverse mineralization properties due to different minerals and mineral deposit types. Based on the principal metallogenic factors, metallogenic mechanisms, mineralized components, and occurrence of mineral deposits or ore bodies, the Gejiu mineral district can be divided into 2 combinations of metallogenic series, 4 metallogenic series, 8 subseries, and 27 mineral deposit types. Spatial zonality is evident. The distribution regularity of the elements in both plane and section is Be-W, Sn (Cu, Mo, Bi, Be)-Sn, Pb, Ag-Pb, Zn around a granitic intrusion. The metallogenic epoch is mainly concentrated in the late Yanshanian. During this period, large-scale metallogenic processes related to movement caused by tectonics and magmatism occurred, and a series of magmatic hydrothermal deposits formed. The ore-forming processes can be divided into 4 stages: the silicate stage, the oxide stage, the sulphide stage, and the carbonate stage. Based on the orderliness and diversity (in terms of time, space, and genesis) of the mineralization, the authors have developed a comprehensive spectrum of ore deposits in the Gejiu area. This newly proposed diversity of mineralization and the spectrum developed in this work are useful not only for interpreting the genesis of the Gejiu deposit but also for improving mineral exploration in the area, and in particular, for finding large deposits.
基金supported by Investigation and Evaluation of Groundwater Resources and Environmental Problems in Hetao Plain (Geological Survey Program, Grant No.1212010913010)
文摘This paper is based on the analysis and research on the silver-lead-zinc polymetallic ore in New Ballyhoo Banner in southern Manzhouli of Inner Mongolia.Because metal mineralization brings rock formations,the geophysical features such as low resistivity,high polarization rate and uneven distribution of magnetization,the comprehensive geophysical methods are adopted including high-precision magnetic measurement,high-power induced polarization,IP field middle gradient and controlled source audio-frequency magnetotellurics.In the survey work of multi-metal ore deposits,from surface sweeping to single point measurement,and from single point to section going deeper layer by layer,the resolution of measurement is continuously improved,and various geophysical methods support and complement each other,so explorers can successfully predict the direction,scale and volume of the metallogenic belts in conjunction with geochemical exploration,geological survey and drilling.It has provided a strong basis for completing the exploration task of predicting the reserve volume of ore bodies.The research conclusions of this exploration case have thus a high reference value in the same type of exploration work.
文摘The Shizhuyuan W,Sn,Mo and Bi polymetallic ore deposit is one of the world famous superlarge ore deposits.The paper briefly introduced the geological setting and features of the ore deposit.Further,an ore- forming model was put forward at the end of the paper.
基金the National Natural Science Foundation of China (Grant No.40072068) and the President Fund of the Chinese Academy of Sciences (Grant No. 99-775), and Laboratory of Nuclear Analysis Technique, CAS.
文摘It is a new attempt to study thermal evolution related to mineralization using the fission track (FT) method. Apatite and zircon fission track data are reported for 6 samples collected from Jiama ore district as well as its periphery. The FT ages of apatites in the ore district are (16.1±0.9) Ma and (18.8±1.1) Ma and reflect the age of late period of hydrothermal mineralizing event. Apatite FT age of (22.0±4.3) Ma and zircon FT age of (20.9±2.0) Ma are related to the early period of mineralization. Another zircon FT age of (341.6±79.1) Ma, inheriting mineral source characteristic, has no connection with the mineralization. Based on the thermal history analysis, the mineralization began before 25-22 Ma. Cooling rate in the ore district is 5-6℃/Ma averagely, in which a slow cooling occurred at 90-80℃. About 2.7 km has been denuded and the denudation rate is higher than the uplifting rate.
文摘Recently,Guangdong Development and Reform Commission released Guangdong 2019 Key Construction Projects Plan,which consists of 1170provincial-level key projects and 628 provinciallevel key preparatory projects of which the preliminary work is being carried out.'Rubidium Tin Polymetallic Ore Exploring Project of Tiantangshan Mine Area,Mabugang,Longchuan County,Guangdong”owned by Guangdong Guangding Mining Group was selected into this Plan.
基金supported by the National 973 Program of China (No. 2012CB416706)
文摘We performed a systematic trace and rare earth element analysis for the bedded Fe-Mn carbonate rocks related to the stratiform Ag-Pb-Zn mineralization in the Lengshuikeng ore district, Jiangxi Province, South China. Three types of Fe-Mn carbonates are distinguished, namely, the massive, breccia, and vein types. Both carbonate and silicate fractions in the samples are analyzed for their trace and rare earth element concentrations using a step acid-leaching technique. Our results show that the carbonate fractions in the massive type samples have the lowest REE concentrations but pronounced positive Eu and Y anomalies with Eu/Eu* value from 1.3 to 6.2 and Y/Ho value from 40.1 to 59.5, and similar characteristics are also shown for the silicate fractions in the massive type samples(Eu/Eu*=1.0-6.7, Y/Ho=20.7-55.1). These REE characteristics are similar to those of Sedex type massive sulfide deposits worldwide, and we suggest that the massive type Fe-Mn carbonate rocks were likely formed from an exhalative volcanic-hydrothermal fluid feeding the depression basin of a volcanic lake. The high concentrations of redox-sensitive elements and ratios such as U/Th, V/Cr and V/(V+Ni) indicate a dysoxic environment for the Fe-Mn carbonate deposition. In contrast, the breccia type and vein type Fe-Mn carbonate samples show different trace and rare earth element features from those of massive type samples, and they are more similar to the volcanic rocks and magmatic-hydrothermal fluids in the Lengshuikeng ore district and may reflect strong overprinting from volcanic and sub-volcanic magmatism related to the porphyry type mineralization in the district.
基金supported by the Science and Technology Major Project of Xinjiang Uygur Autonomous Region,China(2021A03001-3)the Key Area Deployment Project of the Chinese Academy of Sciences(ZDRW-ZS-2020-4-30)the National Natural Science Foundation of China(U1803117).
文摘Hyperspectral remote sensing technology is widely used to detect element contents because of its multiple bands,high resolution,and abundant information.Although researchers have paid considerable attention to selecting the optimal bandwidth for the hyperspectral inversion of metal element contents in rocks,the influence of bandwidth on the inversion accuracy are ignored.In this study,we collected 258 rock samples in and near the Kalatage polymetallic ore concentration area in the southwestern part of Hami City,Xinjiang Uygur Autonomous Region,China and measured the ground spectra of these samples.The original spectra were resampled with different bandwidths.A Partial Least Squares Regression(PLSR)model was used to invert Cu contents of rock samples and then the influence of different bandwidths on Cu content inversion accuracy was explored.According to the results,the PLSR model obtains the highest Cu content inversion accuracy at a bandwidth of 35 nm,with the model determination coefficient(R^(2))of 0.5907.The PLSR inversion accuracy is relatively unaffected by the bandwidth within 5-80 nm,but the accuracy decreases significantly at 85 nm bandwidth(R^(2)=0.5473),and the accuracy gradually decreased at bandwidths beyond 85 nm.Hence,bandwidth has a certain impact on the inversion accuracy of Cu content in rocks using the PLSR model.This study provides an indicator argument and theoretical basis for the future design of hyperspectral sensors for rock geochemistry.
基金financially supported by the National Natural Science Foundation of China(No.41972066)the Mineral Prospecting of Zhonghe silver polymetallic deposit in Luoning County,Henan Province。
文摘Located in Luoning County,western Henan Province,Central China,the Zhonghe Ag-Pb-Zn ore field,is a newly discovered deposit in the Xiaoshan District.Ore bodies controlled by NNW Faults occur as veins within the Paleoproterozoic Xiong’er Group or the Early Cretaceous porphyritic granite.Given that the Zhonghe deposit has been covered by thick Quaternary sediments,the paragenetic mineral assemblage was determined mainly by microscopic observations,including the quartzsiderite-pyrite alteration (StageⅠ),polymetallic sulfide precipitation (StageⅡ),silver mineralization(Stage Ⅲ),and quartz-carbonate stage (StageⅣ).The host minerals for silver are diverse,such as freibergite,pyrargyrite,polybasite,argyrodite,canfieldite,argentite,and native silver,whereas those for Pb and Zn are galena and sphalerite,respectively.In order to constrain the ore-forming components of the Zhonghe deposit,a combined in-situ analysis was conducted on represented sulfides from StageⅡand Stage Ⅲ.In-situ δ^(34)S values of the analyzed sulfides,including the pyrite,chalcopyrite,sphalerite,and galena,display a relatively narrow range (0.90‰-5.0‰),which is close to magmatic sulfur source.The ^(206)Pb/^(204)Pb and^(207)Pb/^(204)Pb ratios show a narrow range (17.140-17.360 and 15.385-15.490),whereas the ^(208)Pb/^(204)Pb ratios exhibit a broad variation (36.601-37.943),indicating a contamination of the Xiong’er Group.Synthesis of geochronological and geochemical data from the Xiaoshan District,we contend that the ore-forming materials of the Zhonghe Ag-Pb-Zn deposit are originated from the lower crust,which has presumably been influenced by the large-scale lithospheric delamination of the eastern North China Craton during the Early Cretaceous.In consideration of the geological setting,mineralogy,and geochemical compositions,we suggest that the Zhonghe Ag-Pb-Zn deposit is characterized as intermediate sulfidation type epithermal deposit,and may be a potential exploration target for porphyry Mo-Cu deposits.
基金jointly supported by the National Key R&D Program of China(Nos.2016YFC0600509,2017YFC0601504)。
文摘Fault and fractures are well-developed in the Gejiu tin-polymetallic district,and they are closely related to the formation and distribution of ores.In this paper,the principal component analysis(PCA)and multifractal singular value decomposition(MSVD)methodologies were applied for identification of the ore-forming anomaly components from element concentrations of fault rocks in the Laochang ore field,Gejiu.The results show that:(1)the wall rocks and fault rocks have anomalous concentrations of ore-forming elements,indicating that these elements are mainly derived from fluid/rock interaction in the fracture zones;(2)PCA based on clr-transformed data was used to recognize significant association anomalies of ore-forming elements,which lay a foundation for further extracting ore-forming anomaly components from the element association anomalies related to Sn-Cu mineralization;(3)MSVD could effectively explore local anomaly features and decompose ore-forming element association anomalies associated with buried mineralization in more detail.The ore-forming element anomaly components can delineate ore-finding Sn-Cu polymetallic deposits more exactly than the ore-forming element association anomalies.