Geology and mineralization of the Dongping supergiant alkalic-hosted Au-Te deposit(>100 t Au)in Northern Hebei Province,China:A review

The Dongping deposit is the largest alkalic-hosted gold deposit in China containing>100 t of Au.This paper presents a new understanding for Dongping ore system,based on the previous studies.The mineralization originally occurred at 400-380 Ma,simultaneous with emplacement of the Shuiquangou alkaline complex,and was overprinted by the hydrothermal activity in the Yanshanian.Isotope compositions of ores indicate metals of the deposit are mainly provided by the Shuiquangou complex.Ore-forming fluids are characterized by increasing oxygen fugacity and decreasing sulfur fugacity,while tellurium fugacity increased in the Stage II-2 and decreased in Stage II-3.These systematic changes are closely related to the processes of mineral precipitation and fluid evolution.Sulfide precipitation from Stage Ⅰ to Stage Ⅱ was triggered by fluid boiling,which leads to the precipitation of Pb-Bi-Te,due to decrement of sulfur fugacity.Condensation of gas phase containing high concentration of H_2Te leads to precipitation of Te-Au-Ag minerals and native tellurium.Based on these hypotheses,this paper present a polyphase metallogenic model as follow.During the Devonian,fluids were released from alkaline magmas,which carried ore-forming materials form the surrounding rocks and precipitate the early ores.During the Jurassic-Cretaceous,fluorine-rich fluids exsolved from highly factionated Shangshuiquan granite,which extracted and concentrated Au from the Shuiquangou complex and the Sanggan Group metamorphic rocks,and finally formed the Dongping gold deposit.

Geochemistry, mineral paragenesis and geothermal conditions of oreforming fluids from the Ain El Bey Cu–Fe deposit: potential occurrence of native gold and precious metal traces (North African orogenic belt, Northern Tunisia)

The Ain El Bey abandoned mine, in North-West Tunisia, fits into the geodynamic context of the European and African plate boundary. Ore deposit corresponds to veins and breccia of multiphase Cu–Fe-rich mineralization related to various hydrothermal fluid circulations. Petromineralogical studies indicate a rich mineral paragenesis with a minimum of seven mineralization phases and, at least, six pyrite generations. As is also the case for galena and native silver, native gold is observed for the first time as inclusion in quartz which opens up, thus, new perspectives for prospecting and evaluating the potential for noble metals associated with the mineralization. Scanning Electron Microscope--Energy Dispersive Spectroscopy and Transmission electron microscopy analyses show, in addition, a large incorporation of trace elements, including Ag and Au, in mineral structures such as fahlores(tetrahedrite-tennantite) and chalcopyrite ones. The mineral/mineral associations, used as geothermometers, gave estimated temperatures for the mineralizing fluids varying from 254 to 330 ℃ for phase Ⅲ, from 254 to 350 ℃ for phase Ⅳ, and from 200 to 300 ℃ for phases Ⅴ and Ⅵ. The seventh and last identified mineralization phase, marked by a deposit of native gold, reflects a drop in the mineralizing fluid’s temperature(< 200 ℃) compatible with boiling conditions. Such results open up perspectives for the development of precious metal research and the revaluation of the Cu–Fe ore deposit at the Ain El Bey abandoned mine, as well as at the surrounding areas fitting in the geodynamic framework of the Africa-Europe plate boundary.

Mineralogical study and significance of the basalt-hosted Carlin-type Au deposits in southwestern Guizhou Province,China

The Jiadi and Damaidi gold deposits in southwest Guizhou Province are the largest basalt-hosted Carlintype gold deposits recently discovered in China.This study uses the Tescan Integrated Mineral Analyzer,supported by detailed field investigations,regional geological data,and extensive sample collections,including mineralized ore,altered wall rock,and unaltered basalt samples,for orebearing and geochemical analyses.Comparative analysis between altered and unaltered basalt samples revealed a mineral assemblage of sericite,quartz,and pyrite.This mineral composition forms through the hydrothermal alteration of unaltered basalt,originally containing feldspar,pyroxene,and ilmenite.The wall rock primarily features sericite,quartz,and hematite.During the alteration process,major,trace,and rare earth elements notably migrate.In the Jiadi deposit,K_(2)O,Rb,Au,and REE significantly increase,while Na_(2)O,CaO,MgO,and MnO decrease.SiO_(2),Al_(2)O_(3),and Fe_(2)O_(3)levels remain relatively stable.In the Damaidi deposit,K_(2)O,Rb,and Au enrich,contrasting with the depletion of Na_(2)O,CaO,MgO,and MnO,while SiO_(2),Fe_(2)O_(3),Al_(2)O_(3),TiO_(2),and REE show no significant changes.In the wall rock,TiO_(2),Al_(2)O_(3),K_(2)O,and REE increase,while Na_(2)O,CaO,MgO,and MnO decrease;SiO_(2)and Fe_(2)O_(3)content remains unchanged.The mineralization process likely originated from mid-to low-temperature,reductive magmatic hydrothermal fluids rich in CO_(2),CH_(4),N_(2),H^(+),S^(2-),HS^(-),H_(3)AsO_(3),and[Au(HS_(2)]^(-).These fluids migrated to tectonically weak zones in the Lianhuashan area,where Emeishan basalts are present.They reacted with Fe-bearing minerals in the basalt,such as ferro-hornblende and ilmenite,forming pyrite,arsenic-bearing pyrite,and arsenopyrite,thus enriching Au in these minerals.Additionally,K^(+)and H^(+)in the fluid reacted with plagioclase in the basalt,forming sericite and quartz.As the fluid entered the wall rock from structural weak zones,its oxidation increased,leading to the complete or partial reaction of Fe-bearing minerals in the wall rock,resulting in the formation of hematite or magnetite.This mineralization process is similar to that observed in carbonate-hosted Carlin-type gold deposits in southwest Guizhou,with the primary distinction being the iron source.In carbonate deposits,iron originates from ferridolomite within the wall rock,while in basalt-hosted deposits,it derives from ferripyroxene and ilmenite.

Trace element compositions of pyrite and stibnite:implications for the genesis of antimony mineralization in the Yangla Cu skarn deposit,Northwestern Yunnan,China

The Yangla Cu skarn deposit is located in the central part of the Jinshajiang Suture Zone,southwest China,with a total reserve of 150 Mt Cu@1.03%.The newly discovered antimony orebodies at the depth of Yangla are strictly controlled by the stratum,structure,and lithology,which are lenticular and vein-like within the marble fracture zone,which can provide a window into multistage miner-alization and ore genesis at Yangla.Mineralization can be divided into three types,Cu–Pb–Zn(skarn)pyrite,galena,and sphalerite,Cu(porphyry)chalcopyrite and pyrite,and Sb(hydrothermal)stibnite and pyrite.The mineral assem-blages were stibnite+pyrite+calcite+quartz±minor scheelite in antimony ores.This study presents quantitative measurements of the trace element compositions of pyrite and stibnite from the Yangla antimony ores.Analysis of pyrite with electron probe microanalysis(EPMA)showed enrichment in Co,Ni,Sb,As,and Mo,and deficit in its S and Fe contents when compared to the stoichiometric con-centrations of S and Fe in pyrite.The Sb-related pyrite may belong to sedimentary-reworked genesis and may be modi-fied by hydrothermalfluids,thereby presenting a certain dif-ference(i.e.,crystal morphology,texture,and chemical com-position)compared to the skarn and porphyry Cu-related pyrite in the Yangla Cu skarn deposit.Analysis of stibnite with EPMA and inductively coupled plasma-mass spectrom-etry showed enrichment in As,Pb,Sn,Pb,Cu,and Zn,and presented much higher Sb contents and slightly lower S con-tents when compared to the stoichiometric concentrations of Sb and S in stibnite.Statistical analysis of the stibnite trace elements showed correlations for the elemental pairs Cu–Pb,As–Sb,and Sn–Pb,and the coupled substitution equations Sb^(3+)↔Cu^(+)+Pb^(2+),Sb^(3+)↔As^(3+),and Sn^(2+)↔Pb^(2+)may be the major factors governed the incorporating Cu,Pb,As and Sn within the stibnite.Moreover,this study preliminary shows that the antimony mineralization may belong to a car-bonate replacement hydrothermal genesis at Yangla.

Three-dimensional Modeling of Ore-forming Elements and Mineralization Prognosis for the Yechangping Mo Deposit,Henan Province,China

Three-dimensional geochemical modeling of ore-forming elements is crucial for predicting deep mineralization.This approach provides key information for the quantitative prediction of deep mineral localization,three-dimensional fine interpolation,analysis of spatial distribution patterns,and extraction of quantitative mineral-seeking markers.The Yechangping molybdenum(Mo)deposit is a significant and extensive porphyry-skarn deposit in the East Qinling-Dabie Mo polymetallic metallogenic belt at the southern margin of the North China Block.Abundant borehole data on oreforming elements underpin deep geochemical predictions.The methodology includes the following steps:(1)Threedimensional geological modeling of the deposit was established.(2)Correlation,cluster,and factor analyses post delineation of mineralization stages and determination of mineral generation sequence to identify(Cu,Pb,Zn,Ag)and(Mo,W,mfe)assemblages.(3)A three-dimensional geochemical block model was constructed for Mo,W,mfe,Cu,Zn,Pb,and Ag using the ordinary kriging method,and the variational function was developed.(4)Spatial distribution and enrichment characteristics analysis of ore-forming elements are performed to extract geological information,employing the variogram and w(Cu+Pb+Zn+Ag)/w(Mo+W)as predictive indicators.(5)Identifying the western,northwestern,and southwestern areas of the mine with limited mineralization potential,contrasted by the northeastern and southeastern areas favorable for mineral exploration.

Magmatic-hydrothermal Evolution and Mineralization Mechanisms of the Wangjiazhuang Cu(-Mo)Deposit in the Zouping Volcanic Basin,Shandong Province,China:Constraints from Fluid Inclusions

The Wangjiazhuang Cu(-Mo)deposit,located within the Zouping volcanic basin in western Shandong Province,China,is unique in this area for having an economic value.In order to expound the metallogenetic characteristics of this porphyry-like hydrothermal deposit,a detailed fluid inclusion study has been conducted,employing the techniques of representative sampling,fluid inclusion petrography,microthermometry,Raman spectroscopy,LA-ICP-MS analysis of single fluid inclusions,as well as cathode fluorescence spectrometer analysis of host mineral quartz.The deposit contains mainly two types of orebodies,i.e.veinlet-dissemination-stockwork orebodies in the K-Si alteration zone and pegmatiticquartz sulfide veins above them.In addition,minor breccia ore occurs locally.Four types of fluid inclusions in the deposit and altered quartz monzonite are identified:L-type one-or two-phase aqueous inclusions,V-type vapor-rich inclusions with V/L ratios greater than 50%-90%,D-type multiphase fluid inclusions containing daughter minerals or solids and S-type silicate-bearing fluid inclusions containing mainly muscovite and biotite.Ore petrography and fluid inclusion study has revealed a three-stage mineralization process,driven by magmatic-hydrothermal fluid activity,as follows.Initially,a hydrothermal fluid,separated from the parent magma,infiltrated into the quartz monzonite,resulting in its extensive K-Si alteration,as indicated by silicate-bearing fluid inclusions trapped in altered quartz monzonite.This is followed by the early mineralization,the formation of quartz veinlets and dissemination-stockwork ores.During the main mineralization stage,due to the participation and mixing of meteoric groundwater with magmatic-sourced hydrothermal fluid,the cooling and phase separation caused deposition of metals from the hydrothermal fluids.As a result,the pegmatitic-quartz sulfide-vein ores formed.In the late mineralization stage,decreasing fluid salinity led to the formation of L-type aqueous inclusions and chalcopyrite-sulfosalt ore.Coexistence of V-type and D-type inclusions and their similar homogenization temperatures with different homogenization modes suggest that phase separation or boiling of the ore-forming fluids took place during the early and the main mineralization stages.The formation P-T conditions of S-type inclusions and the early and the main mineralization stages were estimated as ca.156-182 MPa and 450-650℃,350-450℃,18-35 MPa and 280-380℃,8-15 MPa,respectively,based on the microthermometric data of the fluid inclusions formed at the individual stages.

In situ U-Pb dating and trace elements of magmatic rutile from Mujicun Cu-Mo deposit,North China Craton:Insights into porphyry mineralization

Porphyry Cu(Mo-Au)deposit is one of the most important types of copper deposit and usually formed under magmatic arc-related settings,whilst the Mujicun porphyry Cu-Mo deposit in North China Craton uncommonly generated within intra-continental settings.Although previous studies have focused on the age,origin and ore genesis of the Mujicun deposit,the ore-forming age,magma source and tectonic evolution remain controversial.Here,this study targeted rutile(TiO_(2))in the ore-hosting diorite porphyry from the Mujicun Cu-Mo deposit to conduct in situ U-Pb dating and trace element composition studies,with major views to determine the timing and magma evolution and to provide new insights into porphyry Cu-Mo metallogeny.Rutile trace element data show flat-like REE patterns characterized by relatively enrichment LREEs and depleted HREEs,which could be identified as magmatic rutile.Rutile U-Pb dating yields lower intercept ages of 139.3–138.4 Ma,interpreted as post magmatic cooling timing below about 500℃,which are consistent or slightly postdate with the published zircon U-Pb ages of diorite porphyry(144.1–141.7 Ma)and skarn(146.2 Ma;139.9 Ma)as well as the molybdenite Re-Os ages of molybdenum ores(144.8–140.0 Ma).Given that the overlap between the closure temperature of rutile U-Pb system and ore-forming temperature of the Mujicun deposit,this study suggests that the ore-forming ages of the Mujicun deposit can be constrained at 139.3–138.4 Ma,with temporal links to the late large-scale granitic magmatism at 138–126 Ma in the Taihang Orogen.Based on the Mg and Al contents in rutile,the magma of ore-hosting diorite porphyry was suggested to be derived from crust-mantle mixing components.In conjunction with previous studies in Taihang Orogen,this study proposes that the far-field effect and the rollback of the subducting Paleo-Pacific slab triggered lithospheric extension,asthenosphere upwelling,crust-mantle interaction and thermo-mechanical erosion,which jointly facilitated the formation of dioritic magmas during the Early Cretaceous.Subsequently,the dioritic magmas carrying crust-mantle mixing metallic materials were emplaced and precipitated at shallow positions along NNE-trending ore-controlling faults,eventually resulting in the formation of the Mujicun Cu-Mo deposit within an intracontinental extensional setting.

Geology and mineralization of the Hongqiling large magmatic nickel-copper-cobalt deposit(22×10^(4)t)in Jilin Province,China:A review

The Hongqiling large nickel-copper-cobalt deposit(hereafter referred to as the Hongqiling deposit),a typical mafic-ultramafic copper-nickel deposit in China,boasts proven Ni(Ni)resources of approximately 22×10^(4)t,associated copper resources of 2×10^(4)t,and associated cobalt(Co)resources of 0.5×10^(4)t,with Ni reserves ranking 10th among China's magmatic nickel deposits.Geotectonically,the Hongqiling deposit is situated in the superimposed zone between the Xing'an-Mongolian orogenic belt and the circum-Western Pacific's active continental margin belt.Its ore-bearing plutons occur within the metamorphic rocks of the Ordovician Hulan Group,with the emplacement of plutons and the locations of orebodies governed by the deep-seated Huifahe fault and its secondary NW-trending Fujia-Hejiagou-Beixinglong-Changsheng fault zone.In the deposit,the rock assemblages of ore-bearing plutons predominantly encompass gabbro-pyroxenite-olivine pyroxenite-pyroxene peridotite(pluton No.1)and norite-orthopyroxenite-harzburgite(pluton No.7),with ore-bearing lithofacies consisting primarily of olivine pyroxenite and pyroxenite facies.The Hongqiling deposit hosts stratoid,overhanging lentoid,veined,and pure-sulfide veined orebodies.Its ores principally contain metallic minerals including pyrrhotite,pentlandite,chalcopyrite,violarite,and pyrite.Despite unidentified magma sources of ore-bearing mafic-ultramafic rocks,it is roughly accepted that the magmatic evolution in the Hongqiling deposit primarily involved fractional crystallization and crustal contamination.The ore-forming materials were primarily derived from the upper mantle,mixed with minor crustal materials.The ore-bearing mafic-ultramafic rocks in the deposit,primarily emplaced during the Indosinian(208-239 Ma),were formed in an intense extension setting followed by the collisional orogeny between the North China Plate and the Songnen-Zhangguangcai Range Block during the Middle-Late Triassic.From the perspective of the metallogenic geological setting,surrounding rocks,ore-controlling structures,and rock assemblages,this study identified one favorable condition and seven significant indicators for prospecting for Hongqiling-type nickel deposits and developed a prospecting model of the Hongqiling deposit.These serve as valuable references for exploring similar nickel deposits in the region,as well as the deep parts and margins of the Hongqiling deposit.

Fluid inclusion and mineralization of Dafulou tin deposit in Dachang metal district, Guangxi, south China

Based on the study of the petrology, mineralogy, structural geology and fluid inclusion of the Dafulou ore deposit in the Dachang ore field, the ore deposit geology and ore-forming fluids were analyzed. It shows that there are five main hydrothermal alteration types in the Dafulou ore district, namely the silicification, carbonate, sericite, pyrite and pyrrhotite. The mineralization types are composed of the stratiform type, interlayer type and stockwork type. The ore textures present as metasomatic texture, euhedral-subhedral granular texture and solid solution texture. The ore structure consists of massive structure, dissemination structure, fine veined structure, stockwork structure and brecciated structure. Four ore types are recognized, namely the disseminated ore, dense massive ore, veinlet ore and brecciated ore. Six types of fluid inclusions are determined, i.e. the single-phase gaseous fluid inclusions, single-phase salt solution fluid inclusions, two-phase vapour-rich fluid inclusions, two-phase liquid-rich fluid inclusions, three-phase CO2-rich fluid inclusions and solid（s）-bearing fluid inclusions, all of which form in three dominant temperature scopes, 120-150, 230-270, 350-460 °C. But, the majority of them form in the high temperature environment （350-460 °C）. The tectonism plays an important role in the mineralization, which usually controls the scale, occurrence and shape of the Sn orebody. There are four types of hydrothermal fluid systems, H2O-NaCl-CaCl2, H2O-CaCl2, H2O-NaCl-MgCl2 and H2O-MgCl2. Similar to the other ore deposits in the Dachang ore field, there also exists the multiple source of ore-forming fluids. Overall, the Dafulou ore deposit should be the result of the crust-mantle interaction.

Metallogenetic Mechanism and Timing of Late Superimposing Fluid Mineralization in the Dongguashan Diplogenetic Stratified Copper Deposit,Anhui Province

An important diplogenetic mineralization event superimposed on pre-existing exhalation sediments in the Tongling area, Anhui province, was triggered by widespread granitic magmatism along the northeastern margin of the Yangtze Block during 140–135 Ma under extensional tectonic circumstances following the collision between the North China and Yangtze blocks. The main orebodies of the Dongguashan copper deposit, a typical diplogenetic stratified deposit among many polymetallic ore deposits in China, are hosted by strata between Upper Devonian sandstone and Carboniferous limestone, and its mineralization was genetically related to the Qingshanjiao intrusive. The Rb-Sr isotopic isochron of the Qingshanjiao intrusive yields an age of about 136.5±1.4 Ma. The ore-forming fluid reflected by the inclusion fluid in quartz veins is characterized by high temperature and high salinity, and its age was also determined by Rb -Sr isotope dating as 134±11 Ma. Oxygen and hydrogen isotope composition data suggest that the ore-forming fluid was derived mainly from magmatism. By integrating these isotopic dating data, characteristics of fluid inclusions and the geology of the deposit, the mineralization of the Dongguashan copper deposit is divided into two stages. First, a stratiform sedimentary deposit or protore layer formed in the Late Devonian to the Early Carboniferous, while in the second stage the pre-existing protore was superimposed by hydrothermal fluid that was derived from the Yanshanian magmatic activities occurring around 135 Ma ago. This two-stage mineralization formed the Dongguashan statiform copper deposit. Associated “porphyry” mineralization found in the bottom of and in surrounding intrusive rocks of the orebodies might have occurred in the same period as a second-stage mineralization of this deposit.

Fluid-melt Inclusions in Fluorite of the Huanggangliang Skarn Iron-Tin Deposit and Their Significance to Mineralization

For the first time, fluid-melt inclusions are found in fluorite of the Huanggangliang skarn iron-tin deposit (HSID). The fluorite was formed in the main stage of mineralization, named the hydro-skarnization stage. The inclusions contain various components such as Fe, Mg and Cr from deep sources. The melts of primary inclusions are mainly Ca- and F-rich and those of secondary inclusions tend to become Si-rich. During this evolution process, the melts and iron daughter minerals decreased and even vanished. These facts reveal that the evolution of the primary mineralizing fluids and the differentiation of the fluids and melts are the main factors leading to the deposition of Fe, Sn and other elements. This discovery confirms the magmatic genesis of the HSID and has filled in the gaps in the research of magmatogenic skarn deposits and furnished new methods for such research. Furthermore, it has enlarged the scope of the research on fluid inclusions.

Alteration and mineralization styles of the orogenic disseminated Zhenyuan gold deposit, southeastern Tibet: Contrast with carlin gold deposit

Orogenic disseminated and Carlin gold deposits share much similarity in alteration and mineralization.The disseminated orogenic Zhenyuan Au deposit along the Ailaoshan shear zone,southeastern Tibet,was selected to clarify their difference.The alteration and mineralization from the different lithologies,including meta-quartz sandstone,carbonaceous slate,meta-(ultra)mafic rock,quartz porphyry and lamprophyre were researched.According to the mineral assemblage and replacement relationship in all types of host rocks,two reactions show general control on gold deposition:(1) replacement of earlier magnetite by pyrite and carbonaceous material;(2) alteration of biotite and phlogopite phenocrysts in quartz porphyry and lamprophyre into dolomite/ankerite and sericite.Despite the lamprophyre is volumetrically minor and much less fractured than other host rocks,it contains a large portion of Au reserve,indicating that the chemically active lithology has played a more important role in gold precipitation compared to structure.LA-ICP-MS analysis shows that Au mainly occurs as invisible gold in fine-grained pyrite disseminated in the host rocks,with Au content reaching to 258.95 ppm.The diagenetic core of pyrite in meta-quartz sandstone enriched in Co,Ni,Mo,Ag and Hg is wrapped by hydrothermal pyrite enriched in Cu,As,Sb,Au,Tl,Pb and Bi.Different host rock lithology has much impact on the alteration and mineralization features.Carbonate and sericite in altered lamprophyre show they have higher Mg than those developed in other of host rocks denoting that the carbonate and sericite incorporated Mg from phlogopite phenocrysts in the primary lamprophyre during alteration.The ore fluid activated the diagenetic pyrite in meta-quartz sandstone leading the hydrothermal pyrite enriched in Cu,Mo,Ag,Sb,Te,Hg,Tl,Pb and Bi,but the hydrothermal pyrite in meta-(ultra)mafic rock is enriched in Co and Ni as the meta-(ultra)mafic rock host rock contain high content of Co and Ni.However,Au and As shear similar range in both types of host rocks indicating that these two elements most likely come from the deep source fluid rather than the host rocks.It was shown in the disseminated orogenic gold deposit that similar hydrothermal alteration with mineral assemblage of carbonate (mainly dolomite and ankerite),sericite,pyrite and arsenopyrite develops in all types of host rocks.This is different from the Nevada Carlin type,in which alteration is mainly dissolution and silicification of carbonate host rock.On the other hand,Au mainly occur as invisible gold in both disseminated orogenic and Carlin gold deposits.

Diversity of Mineralization and Spectrum of the Gejiu Superlarge Tin-Copper Polymetallic Deposit,Yunnan,China

The Gejiu （个旧） deposit is a superlarge tin-copper polymetallic ore-forming concentration area characterized by excellent metallogenic geological settings and advantageous ore-controlling factors. The deposit displays diverse mineralization properties due to different minerals and mineral deposit types. Based on the principal metallogenic factors, metallogenic mechanisms, mineralized components, and occurrence of mineral deposits or ore bodies, the Gejiu mineral district can be divided into 2 combinations of metallogenic series, 4 metallogenic series, 8 subseries, and 27 mineral deposit types. Spatial zonality is evident. The distribution regularity of the elements in both plane and section is Be-W, Sn （Cu, Mo, Bi, Be）-Sn, Pb, Ag-Pb, Zn around a granitic intrusion. The metallogenic epoch is mainly concentrated in the late Yanshanian. During this period, large-scale metallogenic processes related to movement caused by tectonics and magmatism occurred, and a series of magmatic hydrothermal deposits formed. The ore-forming processes can be divided into 4 stages： the silicate stage, the oxide stage, the sulphide stage, and the carbonate stage. Based on the orderliness and diversity （in terms of time, space, and genesis） of the mineralization, the authors have developed a comprehensive spectrum of ore deposits in the Gejiu area. This newly proposed diversity of mineralization and the spectrum developed in this work are useful not only for interpreting the genesis of the Gejiu deposit but also for improving mineral exploration in the area, and in particular, for finding large deposits.

Chronology of the Tungsten Deposits in Southern Jiangxi Province, and Episodes and Zonation of the Regional W-Sn Mineralization-Evidence from High-precision Zircon U-Pb, Molybdenite Re-Os and Muscovite Ar-Ar Ages

Previous studies have obtained some petrogenetic and metallogenic chronological data with SHRIMP （sensitive high-resolution ion microprobe） zircon U-Pb, zircon LA-ICPMS （laser-ablation-inductively coupled plasma mass spectroscopy） U-Pb, molybdenite Re-Os isochron and muscovite Ar-Ar methods in southern Jiangxi Province and its adjacent areas. Based on these, the purpose of this paper is to study the petrogenetic and metallogenic ages and their time gap for different genetic types of W-Sn deposits, and thus to research their numerous episodes, zonal arrangement and their geodynamic background. The result shows that the large-scale W-Sn mineralization in southern Jiangxi Province occurred in the middle to late Jurassic （170-150 Ma）, the skarn W-Sn-polymetallic deposits formed much earlier （170-161 Ma）, and all of the wolframite-quartz vein type, greisen type, altered granite type and fractured zone type tungsten deposits formed in the late Jurassic （160-150 Ma）. In one ore field or ore district, greisen type tungsten deposits formed earlier than quartz vein type ones hosted in the endoor exo-contact zone; and quartz vein type hosted in the endocontact zone formed earlier than that of exocontact zone. There is no significant time difference between tungstentin mineralization and its intimately associated parent granite emplacement （1-6 Ma）. They all formed in the same rock-forming and ore-forming system and under the same geodynamic setting. Regionally, rock-forming and ore-forming processes of the W-Sn deposits in the Nanling region （include southern Jiangxi Province, southern Hunan Province, northern Guangdong Province and eastern Guangxi Zhuang Autonomous Region） exhibit numerous episodes. The mineralization in the Nanling region mainly occurred at （240-210） Ma, （170-150） Ma and （130-90） Ma. The tungsten-tin deposits in this region are centered by the largest scale in southern Jiangxi Province and southern Hunan Province, and become small in the east, west, south and north directions. This displays a zonal arrangement and temporal and spatial distribution regularity. Integrated with the latest research results, it is concluded that the W-Sn mineralization in southern Jiangxi Province and its adjacent areas corresponds to the second large-scale mineralization in South China. The Indosinian W-Sn mineralization formed under the extensional tectonic regime between collisional compressional stages, while the Yanshanian large-scale petrogenetic and metallogenic processes occurred in the Jurassic intraplate extensional geodynamic setting of lithosphere extension.

Mineralization during Collisional Orogenesis and Its Control of the Distribution of Gold and Other Deposits in the Junggar Orogen, Xinjiang, China

The Junggar orogen, Xinjiang, China, is an important part of the Ural-Mongolian orogen.The collisional orogenesis in this region occurred primarily in the Carboniferous and Permianwith an evolutional process of early compression and late extension. Mineralization of gold andother metals in the Junggar orogen occurred mainly in the Permian and in a few cases in theLate Carboniferous. The deposits are largely distributed in areas where collisional orogenesiswas intensive and formed in a transitional stage from compression to extension. Therefore, goldmineralization in the Junggar orogen is fully consistent with the collisional orogenesis in time,space and geodynamic setting. This indicates that the mineral deposit model of collisionalorogenesis is applicable to prospecting and study of ore deposits in the Junggar orogen.Furthermore, the factual distribution of gold and other deposits in this region is just the same asthe collisional orogenic model presents.

Mineral Geochemical Compositions of Tourmalines and Their Significance in the Gejiu Tin Polymetallic Deposits, Yunnan, China

The Gejiu tin polymetallic deposits are located in the southeastern part of Yunnan Province in China. A detailed electronic microprobe study has been carried out to document geochemical compositions of tourmalines from the deposits. The results indicate a systematic change of mineral geochemical compositions, which might be used as a mineral geochemical tracer for post-magmatic hydrothermal fluid, basin fluid and their mixture. The tourmalines from granite are schori with Fe/ （Fe＋Mg） ratios of 0.912-1.00 and Na/（Na＋Ca） ratios of 0.892-0.981. Tourmalines as an inclusion in quartz from the ore bodies are dravite with Fe/（Fe＋Mg） ratios of 0.212-0.519 and Na/（Na＋Ca） ratios of 0.786--0.997. Tourmalines from the country rocks are dravite with Fe/（Fe＋Mg） ratios of 0.313--0.337 and Na/（Na＋Ca） ratio of 0.599-0.723. Tourmalines from cassiterite-tourmaline veins that occur in crannies within the country rocks show distinct optical zoning with alternate occurrence of dravite and schorl, Fe/（Fe＋Mg）=0.374-0.843, Na/（Na＋Ca）=0.538-0.987. It suggests that schorl in granite and dravite in carbonatite are related to magmatic fluid and basin fluid respectively. When magmatic fluid rose up and entered into crannies of the country rocks, consisting mainly of carbonatite, basin fluid would be constantly added to the magmatic fluid. The two types of fluid were mixed in structural crannies of the sedimentary basin accompanied with periodic geochemical oscillations to form material records in chemical composition zonings of tourmalines.

Integration of Deep-time Digital Data for Mapping Clusters of Porphyry Copper Mineral Deposits

1 Introduction PCDs are generated in continental arcs in response to plate converging processes(subduction and collision)(Hou et al.,2009;Richards,2013).It is generally accepted that the formation of PCDs is associated with igneous activities either originating from lower crust or upper mantle,with contributions of crusts during the evolution of continental lithosphere.

Organic Gases in Fluid Inclusions of Ore Minerals and Their Constraints on Ore Genesis:A Case Study of the Changkeng Au-Ag Deposit,Guangdong,China

The newly discovered Changkeng Au-Ag deposit is a new type of sediment-hostedprecious metal deposit. Most of the previous researchers believed that the deposit was formed bymeteoric water convection. By using a high vacuum quadrupole gas mass spectrometric system, ninelight hydrocarbons have been recognized in the fluid inclusions in ore minerals collected from theChangkeng deposit. The hydrocarbons are composed mainly of saturated alkanes C_(1-4) and unsaturatedalkenes C_(2-4) and aromatic hydrocarbons, in which the alkanes are predominant, while the contentsof alkenes and aromatic hydrocarbons are very low. The sum alka/sum alke ratio of most samples ishigher than 100, suggesting that those hydrocarbons are mainly generated by pyrolysis of kerogens insedimentary rocks caused by water-rock interactions at medium-low temperatures, and themetallogenic processes might have not been affected by magmatic activity. A thermodynamiccalculation shows that the light hydrocarbons have reached chemical equilibrium at temperatureshigher than 200 deg C, and they may have been generated in the deep part of sedimentary basins(e.g., the Sanzhou basin) and then be transported by ore-forming fluids to a shallow position of thebasin via a long distance. Most of the organic gases are generated by pyrolysis of the type IIkerogens (kukersite) in sedimentary host rocks, only a few by microorganism activity. Thecompositions and various parameters of light hydrocarbons in gold ores are quite similar to those insilver ores, suggesting that the gold and silver ores may have similar metallogenic processes.Based on the compositions of organic gases in fluid inclusions, the authors infer that the Changkengdeposit may be of a tectonic setting of continental rift. The results of this study support fromone aspect the authors' opinion that the Changkeng deposit is not formed by meteoric waterconvection, and that its genesis has a close relationship with the evolution of the Sanzhou basin,so it belongs to the sedimentary hot brine transformed deposit.

Fractal invariable distribution and its application in large-sized and super large-sized mineral deposits

The self-similar is a common phenomena arising in the field of geology. It has been shown that geochemical element data, mineral deposits, and spacial distribution conform to a fractal structure. A fractal distribution requires that the number of objects larger than a specified size have a power-law dependence on size. This paper shows that a number of distributions, including power-function, Pareto, lognormal, and Zipf, display fractal properties under certain conditions and that this may be used as the mathematical basis for developing fractal models for data exhibiting such distributions. The summation method is developed on the basis of fractal models to determine thresholds for Au data in Shandong Province, China. The anomalous area is enclosed by contours which have contour values greater than or equal to threshold （200 × 10^- 9） and contains known large-sized and super large-sized gold mineral deposits.

Geology and mineralization of the Sanshandao supergiant gold deposit(1200 t)in the Jiaodong Peninsula,China:A review

The Jiaodong Peninsula in Shandong Province,China is the world’s third-largest gold metallogenic area,with cumulative proven gold resources exceeding 5000 t.Over the past few years,breakthroughs have been made in deep prospecting at a depth of 500‒2000 m,particularly in the Sanshandao area where a huge deep gold orebody was identified.Based on previous studies and the latest prospecting progress achieved by the project team of this study,the following results are summarized.(1)3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield,which was previously considered to consist of several independent deposits,is a supergiant deposit with gold resources of more than 1200 t(including 470 t under the sea area).The length of the major orebody is nearly 8 km,with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction.(2)Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined,forming a stepped metallogenic model from shallow to deep level.The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults,the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed.Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure,these sections along the fault plane serve as the target areas for deep prospecting.(3)Thermal uplifting-extensional structures provide thermodynamic conditions,migration pathways,and deposition spaces for gold mineralization.Meanwhile,the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks.This further led to the reactivation of ore-forming elements,which provided rich materials for gold mineralization.(4)It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma,which was superimposed by nonferrous metals mineralization at 118‒111 Ma.The fluids were dominated by primary mantle water or magmatic water.Metamorphic water occurred in the early stage of the gold mineralization,while the fluid composition was dominated by meteoric water in the late stage.The S,Pb,and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks,indicating that the ore-forming materials mainly derive from crustal materials,with the minor addition of mantle-derived materials.The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle,which is different from typical orogenic gold deposits.Thus,it is proposed that they are named“Jiaodong-type”gold deposits.