The pozzolanic activity of nano-SiO2 and silica fume was comparatirely stndied by X-ray diffraction （ XRD ） , differential scanning calorimetry （DSC）, scanning electron micrascopy （SEM） and the compressive , bon...The pozzolanic activity of nano-SiO2 and silica fume was comparatirely stndied by X-ray diffraction （ XRD ） , differential scanning calorimetry （DSC）, scanning electron micrascopy （SEM） and the compressive , bond and bending streugths of hardened paste and concrete were also measured. Results indicate that the compressive strength development of the paste made from Ca（OH）2 and nano-SiO2, the reaction rate of Ca（ OH）2 with nano- SiO2 and the velocity of C-S-H gel formation from Ca （ OH）2 with nano-SiO2 showed marked increases over those of Ca（ OH）2 with silica fume. Furthermore, the bond strength at the interface between aggregate and hardened cement paste, and the bending strength of concrete incorporated with 3% .NS increased more than those with SF, especially at early ages. To sum up, the pozzolanic activity of nano-SiO2 was much greater than that of silica fume. The results suggest that with a small amount of nano-SiO2, the Ca（ OH）2 crystal at the interface between hardened cement paste and aggregate at early ages may be effectively absorbed in high performance concrete.展开更多
We put forward a large-area and cost-effective method to fabricate superhydrophobic coating by introducing in-situ functionalized nano-SiO2 into side-amino modified hydroxy-terminated polydimethylsiloxane （SA-HTPDMS...We put forward a large-area and cost-effective method to fabricate superhydrophobic coating by introducing in-situ functionalized nano-SiO2 into side-amino modified hydroxy-terminated polydimethylsiloxane （SA-HTPDMS） curing system. With the characterization using water contact angle （WCA） tester, Fourier transform infrared spectroscopy （FTIR）, scanning electron microscope （SEM）, atomic force microscopy （AFM） and simultaneous thermal analysis, the as-prepared coating displayed a tremendous WCA of 154.8±1°, sliding angle （SA） about 3.5° and stable self-cleaning property range from -10 to 80 ℃. It was also found that the synergistic effect of surface micro-nano hierarchical structure and chemical hydrophobicity, stability from matrix had made contributions to the superhydrophobicity and excellent heat resistance up to 300 ℃.展开更多
The influences of different nano-SiO2（NS） contents on the mechanical properties and rheological behavior of sulfoaluminate cement（SAC） based composite materials were studied.Results show that with increasing conte...The influences of different nano-SiO2（NS） contents on the mechanical properties and rheological behavior of sulfoaluminate cement（SAC） based composite materials were studied.Results show that with increasing content of NS,the apparent viscosity,and shearing strength of fresh paste gradually increase but the fluidity decreases.With a dosage of 3.0%NS,the tensile and flexural strengths of mortars at 56 days were increased by 87.0%and 84.6%,respectively,compared with that in the absence of NS,indicating that the toughness of hardened mortars is significantly improved.Besides,the exothermic peaks of hydration are obviously increased and will earlier occur,and the second and the third peaks appear 2.61 hours and 2.56 hours earlier,respectively than that in the absence of NS,and the hydration of SAC before 8 hours is accelerated.The forming mechanism of strengths was revealed by scanning electron microscopy（SEM）,hydration heat,X-ray diffraction（XRD） and derivative thermogravimetry（DTG）.The micro-aggregate filling effect and nucleation effect at early age and weak pozzolanic effect at late age of NS make the microstructure more compact,which obviously enhances the strength of SAC mortars.展开更多
The test of fast-freezing method is employed to research the freezing resistance of C60 and C80 high-performance concrete with nanometer-SiO2, and XRD and SEM are employed to analyze the mechanism of its influence. Th...The test of fast-freezing method is employed to research the freezing resistance of C60 and C80 high-performance concrete with nanometer-SiO2, and XRD and SEM are employed to analyze the mechanism of its influence. The experimental results show that the freezing resistance of high-performance concrete has been effectively improved. The compressive strength of C60, C70 and C80 high-performance concrete added with nano-SiO2 can be improved by 8%, 6% and 5% respectively, the weight loss can be reduced by 1%, 0.6% and 0.3% respectively and the relative dynamic elastic modulus can be improved by 7%, 4% and 6% respectively after the 300 times freeze-thaw cycle.展开更多
The role of nano-SiO 2 and ultra-fine boron carbide on the properties of alumina-graphite materials was investigated. The study showed that the ultra-fine boron carbide added modified the microstructure of residual c...The role of nano-SiO 2 and ultra-fine boron carbide on the properties of alumina-graphite materials was investigated. The study showed that the ultra-fine boron carbide added modified the microstructure of residual carbon and promoted the chemical bond between residual carbon from phenolic resin and flake graphite. The carbon white could strengthen the residual carbon from phenolic resin. These two additives improved the mechanical properties of AG refractories at both room temperature and high temperature, and thermal shock resistance was improved noticeably. When the two additives were doped together, carbon white could retard the evaporation of B 2O 3. Thermal shock resistance was guaranteed with a smaller amount of ultra-fine boron carbide.展开更多
Nano-SiO2 was modified using silane coupling agent （KH-550） and hyperbranched poly（amine-ester） respectively, and Poly（vinyl chloride） （PVC）/modified nano-SiO2 composites were made by melt-blending. The compos...Nano-SiO2 was modified using silane coupling agent （KH-550） and hyperbranched poly（amine-ester） respectively, and Poly（vinyl chloride） （PVC）/modified nano-SiO2 composites were made by melt-blending. The composites＇ structures andmechanical properties were characterized by transmission electron microscopy（TEM）, sanning electronic microscopy（SEM） and electronic universal testing machine. The results. show that nano-SiO2 grafted by hyperbranched poly （amine-ester） increases obviously in dispersion in PVC matrix, and mechanical properties of PVC are effectively improved. Moreover, it was found that mechanical properties of PVC/nano-SiO2 composites reach the best when weight percent of nano-SiO2 in PVC matrix is 1%. Compared with crude PVC, the tensile strength of hyperbranched poly （amine-ester） grafted nano-SiO2/ PVC composite increases by 24.68 % and its break elongation, flexural strength and impact strength increase by 15.73%, 4.07% and 1 841.84%, respectively. Moreover, the processing of the composites is improved.展开更多
Nano-SiO2/polypropylene composite was prepared by melt-blending process. The nano-SiO2 particles were organized by wet process surface treatment with silane coupling agent KH-570. The effect of mass fraction of nano-S...Nano-SiO2/polypropylene composite was prepared by melt-blending process. The nano-SiO2 particles were organized by wet process surface treatment with silane coupling agent KH-570. The effect of mass fraction of nano-SiO2 particles and dosage of KH-570 on the toughening and strengthening of PP matrix were investigated based on the fractography of impact notch and the analysis of crystal structure by X-ray and dispersive structure of nano-SiO2 by TEM. Results show that the impact and flexural strength and modulus of the composite are improved obviously with low loading of nano-SiO2 （3 wt%-5 wt%）, and the izod impact strength of PP increases twice with 4 wt% nano-SiO2. The nano-SiO2 particles treated can disperse into the matrix resin, which has evident heterogeneous nucleation effects on the crystallization of PP. The optimal toughening and strengthening effects of PP matrix can be obtained when the content of nano-SiO2 and KH-570 are 4 wt% and 3 wt%, respectively.展开更多
In situ melt polycondensation was proposed to prepare biodegradable aliphatic-aromatic copolyesters/nano-SiO2 hybrids based on terephthalic acid （TPA）, poly（L-lactic acid） oligomer （OLLA）, 1,4-butanediol （BDO）...In situ melt polycondensation was proposed to prepare biodegradable aliphatic-aromatic copolyesters/nano-SiO2 hybrids based on terephthalic acid （TPA）, poly（L-lactic acid） oligomer （OLLA）, 1,4-butanediol （BDO） and nano-SiO2. TEM and FT-IR characterizations confirmed that TPA, OLLA and BDO copolymerized to obtain biodegradable copolyesters, poly（butylene terepbthalate-co-lactate） （PBTL）, and the abundant hydroxyl groups on the surface of nano-SiO2 provided potential sites for in situ grafting with the simultaneous resulted PBTL. The nano-SiO2 particles were chemically wrapped with PBTL to form PBTL/nano- SiO2 hybrids. Due to the good dispersion and interfacial adhesion of nano-SiO2 particles with the copolyester matrix, the tensile strength and the Young＇s modulus increased from 5.4 and 5.6 MPa for neat PBTL to 16 and 390 MPa for PBTL/nano-SiO2 hybrids with 5 wt.% nano-SiO2, respectively. The mechanical properties of PBTL/nano-SiO2 hybrids were substantially improved.展开更多
基金Funded bythe Center of Science Research, Zhejiang Universityof Technology of China
文摘The pozzolanic activity of nano-SiO2 and silica fume was comparatirely stndied by X-ray diffraction （ XRD ） , differential scanning calorimetry （DSC）, scanning electron micrascopy （SEM） and the compressive , bond and bending streugths of hardened paste and concrete were also measured. Results indicate that the compressive strength development of the paste made from Ca（OH）2 and nano-SiO2, the reaction rate of Ca（ OH）2 with nano- SiO2 and the velocity of C-S-H gel formation from Ca （ OH）2 with nano-SiO2 showed marked increases over those of Ca（ OH）2 with silica fume. Furthermore, the bond strength at the interface between aggregate and hardened cement paste, and the bending strength of concrete incorporated with 3% .NS increased more than those with SF, especially at early ages. To sum up, the pozzolanic activity of nano-SiO2 was much greater than that of silica fume. The results suggest that with a small amount of nano-SiO2, the Ca（ OH）2 crystal at the interface between hardened cement paste and aggregate at early ages may be effectively absorbed in high performance concrete.
基金Supported by National High Technology Research and Development ProgramofChina(863Program)(No.2003AA305920)
文摘We put forward a large-area and cost-effective method to fabricate superhydrophobic coating by introducing in-situ functionalized nano-SiO2 into side-amino modified hydroxy-terminated polydimethylsiloxane （SA-HTPDMS） curing system. With the characterization using water contact angle （WCA） tester, Fourier transform infrared spectroscopy （FTIR）, scanning electron microscope （SEM）, atomic force microscopy （AFM） and simultaneous thermal analysis, the as-prepared coating displayed a tremendous WCA of 154.8±1°, sliding angle （SA） about 3.5° and stable self-cleaning property range from -10 to 80 ℃. It was also found that the synergistic effect of surface micro-nano hierarchical structure and chemical hydrophobicity, stability from matrix had made contributions to the superhydrophobicity and excellent heat resistance up to 300 ℃.
基金Funded by the Fundamental Research Funds for the Central Universities(No.2013-YB-25)the National Natural Science Foundation of China(No.51378408)
文摘The influences of different nano-SiO2（NS） contents on the mechanical properties and rheological behavior of sulfoaluminate cement（SAC） based composite materials were studied.Results show that with increasing content of NS,the apparent viscosity,and shearing strength of fresh paste gradually increase but the fluidity decreases.With a dosage of 3.0%NS,the tensile and flexural strengths of mortars at 56 days were increased by 87.0%and 84.6%,respectively,compared with that in the absence of NS,indicating that the toughness of hardened mortars is significantly improved.Besides,the exothermic peaks of hydration are obviously increased and will earlier occur,and the second and the third peaks appear 2.61 hours and 2.56 hours earlier,respectively than that in the absence of NS,and the hydration of SAC before 8 hours is accelerated.The forming mechanism of strengths was revealed by scanning electron microscopy（SEM）,hydration heat,X-ray diffraction（XRD） and derivative thermogravimetry（DTG）.The micro-aggregate filling effect and nucleation effect at early age and weak pozzolanic effect at late age of NS make the microstructure more compact,which obviously enhances the strength of SAC mortars.
文摘The test of fast-freezing method is employed to research the freezing resistance of C60 and C80 high-performance concrete with nanometer-SiO2, and XRD and SEM are employed to analyze the mechanism of its influence. The experimental results show that the freezing resistance of high-performance concrete has been effectively improved. The compressive strength of C60, C70 and C80 high-performance concrete added with nano-SiO2 can be improved by 8%, 6% and 5% respectively, the weight loss can be reduced by 1%, 0.6% and 0.3% respectively and the relative dynamic elastic modulus can be improved by 7%, 4% and 6% respectively after the 300 times freeze-thaw cycle.
文摘The role of nano-SiO 2 and ultra-fine boron carbide on the properties of alumina-graphite materials was investigated. The study showed that the ultra-fine boron carbide added modified the microstructure of residual carbon and promoted the chemical bond between residual carbon from phenolic resin and flake graphite. The carbon white could strengthen the residual carbon from phenolic resin. These two additives improved the mechanical properties of AG refractories at both room temperature and high temperature, and thermal shock resistance was improved noticeably. When the two additives were doped together, carbon white could retard the evaporation of B 2O 3. Thermal shock resistance was guaranteed with a smaller amount of ultra-fine boron carbide.
基金Sponsored by the Ministerial Level Advanced Research Foundation (120701BQ0126)
文摘Nano-SiO2 was modified using silane coupling agent （KH-550） and hyperbranched poly（amine-ester） respectively, and Poly（vinyl chloride） （PVC）/modified nano-SiO2 composites were made by melt-blending. The composites＇ structures andmechanical properties were characterized by transmission electron microscopy（TEM）, sanning electronic microscopy（SEM） and electronic universal testing machine. The results. show that nano-SiO2 grafted by hyperbranched poly （amine-ester） increases obviously in dispersion in PVC matrix, and mechanical properties of PVC are effectively improved. Moreover, it was found that mechanical properties of PVC/nano-SiO2 composites reach the best when weight percent of nano-SiO2 in PVC matrix is 1%. Compared with crude PVC, the tensile strength of hyperbranched poly （amine-ester） grafted nano-SiO2/ PVC composite increases by 24.68 % and its break elongation, flexural strength and impact strength increase by 15.73%, 4.07% and 1 841.84%, respectively. Moreover, the processing of the composites is improved.
基金Funded by the Commission of Science Technology and Industry for National Defense(No.93013)
文摘Nano-SiO2/polypropylene composite was prepared by melt-blending process. The nano-SiO2 particles were organized by wet process surface treatment with silane coupling agent KH-570. The effect of mass fraction of nano-SiO2 particles and dosage of KH-570 on the toughening and strengthening of PP matrix were investigated based on the fractography of impact notch and the analysis of crystal structure by X-ray and dispersive structure of nano-SiO2 by TEM. Results show that the impact and flexural strength and modulus of the composite are improved obviously with low loading of nano-SiO2 （3 wt%-5 wt%）, and the izod impact strength of PP increases twice with 4 wt% nano-SiO2. The nano-SiO2 particles treated can disperse into the matrix resin, which has evident heterogeneous nucleation effects on the crystallization of PP. The optimal toughening and strengthening effects of PP matrix can be obtained when the content of nano-SiO2 and KH-570 are 4 wt% and 3 wt%, respectively.
基金support from the Natural Science Foundation of Ningbo(No.2007A610030)Science and Technology Department of Zhejiang Province(No.2008C11092-2)
文摘In situ melt polycondensation was proposed to prepare biodegradable aliphatic-aromatic copolyesters/nano-SiO2 hybrids based on terephthalic acid （TPA）, poly（L-lactic acid） oligomer （OLLA）, 1,4-butanediol （BDO） and nano-SiO2. TEM and FT-IR characterizations confirmed that TPA, OLLA and BDO copolymerized to obtain biodegradable copolyesters, poly（butylene terepbthalate-co-lactate） （PBTL）, and the abundant hydroxyl groups on the surface of nano-SiO2 provided potential sites for in situ grafting with the simultaneous resulted PBTL. The nano-SiO2 particles were chemically wrapped with PBTL to form PBTL/nano- SiO2 hybrids. Due to the good dispersion and interfacial adhesion of nano-SiO2 particles with the copolyester matrix, the tensile strength and the Young＇s modulus increased from 5.4 and 5.6 MPa for neat PBTL to 16 and 390 MPa for PBTL/nano-SiO2 hybrids with 5 wt.% nano-SiO2, respectively. The mechanical properties of PBTL/nano-SiO2 hybrids were substantially improved.
