Ti3SiC2-reintbrced Ag-maJxix composites are expected to serve as eleclrical contacts. In this study, the wettability of Ag on a Ti3SiC2 subslxate was measured by the sessile drop melkod. The Ag-Ti3SiC2 composites were...Ti3SiC2-reintbrced Ag-maJxix composites are expected to serve as eleclrical contacts. In this study, the wettability of Ag on a Ti3SiC2 subslxate was measured by the sessile drop melkod. The Ag-Ti3SiC2 composites were prepared from Ag mad Ti3SiC2 powder mix- tures by pressureless sintering. The effects of compacting pressure （100-800 MPa）, sintering temperature （850-950~C）, mad soaking time （0.5-2 h） on the microslxucture mad properties of the Ag-Ti3SiC2 composites were investigated. The experimental results indicated that Ti3SiC2 paxticulates were uniformly distxibuted in flae Ag matrix, wiflaout reactions at the interthces between flae two phases. The prepared Ag-10wt%Ti3SiC2 had a relative density of 95% mad an electrical resistivity of 2.76 x 10 3 m~）＇cm when compacted at 800 MPa mad sintered at 950~C for 1 h. The incorporation of Ti3SiC2 into Ag was found to improve its hardness without substantially compromising its electrical conductivity; INs behavior was attxibuted to the combination of ceramic and metallic properties of the Ti3SiC2 reinforcement, suggesting its potential application in electrical contacts.展开更多
This study was conducted to do exposure assessment of the possible migration of antimony trioxide （Sb203） from Polyethylene terephthalate （PET） food contact materials （FCM）. Consumption Factor （CF） and Food-ty...This study was conducted to do exposure assessment of the possible migration of antimony trioxide （Sb203） from Polyethylene terephthalate （PET） food contact materials （FCM）. Consumption Factor （CF） and Food-type Distribution Factor （fT） were calculated from survey data with reference to the US FDA method. The most conservative migration conditions were obtained by testing Sb migration from PET FCM based on the Chinese national standard of GB/T 5009.101-2003[1].展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.51731004,51671054,and 51501038)“the Fundamental Research Funds for the Central Universities”in China
文摘Ti3SiC2-reintbrced Ag-maJxix composites are expected to serve as eleclrical contacts. In this study, the wettability of Ag on a Ti3SiC2 subslxate was measured by the sessile drop melkod. The Ag-Ti3SiC2 composites were prepared from Ag mad Ti3SiC2 powder mix- tures by pressureless sintering. The effects of compacting pressure （100-800 MPa）, sintering temperature （850-950~C）, mad soaking time （0.5-2 h） on the microslxucture mad properties of the Ag-Ti3SiC2 composites were investigated. The experimental results indicated that Ti3SiC2 paxticulates were uniformly distxibuted in flae Ag matrix, wiflaout reactions at the interthces between flae two phases. The prepared Ag-10wt%Ti3SiC2 had a relative density of 95% mad an electrical resistivity of 2.76 x 10 3 m~）＇cm when compacted at 800 MPa mad sintered at 950~C for 1 h. The incorporation of Ti3SiC2 into Ag was found to improve its hardness without substantially compromising its electrical conductivity; INs behavior was attxibuted to the combination of ceramic and metallic properties of the Ti3SiC2 reinforcement, suggesting its potential application in electrical contacts.
基金financially supported by the Beijing Natural Science Foundation-Sanyuan Joint FundingNo.15S00033
文摘This study was conducted to do exposure assessment of the possible migration of antimony trioxide （Sb203） from Polyethylene terephthalate （PET） food contact materials （FCM）. Consumption Factor （CF） and Food-type Distribution Factor （fT） were calculated from survey data with reference to the US FDA method. The most conservative migration conditions were obtained by testing Sb migration from PET FCM based on the Chinese national standard of GB/T 5009.101-2003[1].
