A heterojunction structure design is a very good method for improving the properties of semiconductors in many research fields.This method is employed in the present study to promote the gas-sensing performance of Ag_...A heterojunction structure design is a very good method for improving the properties of semiconductors in many research fields.This method is employed in the present study to promote the gas-sensing performance of Ag_(3)PO_(4)nanocomposites at room temperature(25℃).A nanocomposite of Ag_(3)PO_(4)nanoparticles and three-dimensional peony-like WO_(3)(WO_(3)/Ag_(3)PO_(4))was successfully prepared by the precipitation method.The crystalline phases were analyzed by xray diffraction and the microstructure was characterized by scanning electron microscopy and transmission electron microscopy.The chemical bonding states were analyzed by x-ray photoelectron spectroscopy.The gas-sensing performance of WO_(3)/Ag_(3)PO_(4)sensors was systematically explored at room temperature.The composite sensors possessed a higher response and lower detection limit(1 ppm)to NH_(3)than those made of a single type of material;this is ascribed to the synergistic effect achieved by the heterojunction structure.Among the different composite sensors tested,gas sensor A5W5(Ag_(3)PO_(4):WO3mass ratio of 5:5)displayed the highest response to NH_(3)at room temperature.Interestingly,the A5W5 gas sensor exhibited relatively good stability and excellent selectivity to NH_(3).The A5W5 sensor also displayed a relatively good response under high humidity.The gas-sensing mechanism of the WO_(3)/Ag_(3)PO_(4)sensors is explained in detail.Taken together,the as-prepared sensor is highly efficient at detecting NH_(3)and could be suitable for practical applications.In addition,this study also provides a new method for developing Ag_(3)PO_(4)-based sensors in the gas-sensing field.展开更多
基金financial support from the Collaborative Education Project of IndustryUniversity Cooperation of the Ministry of Education of China(Grant No.202101256024)the National Natural Science Foundation of China(Grant Nos.11904209 and 61802144)。
文摘A heterojunction structure design is a very good method for improving the properties of semiconductors in many research fields.This method is employed in the present study to promote the gas-sensing performance of Ag_(3)PO_(4)nanocomposites at room temperature(25℃).A nanocomposite of Ag_(3)PO_(4)nanoparticles and three-dimensional peony-like WO_(3)(WO_(3)/Ag_(3)PO_(4))was successfully prepared by the precipitation method.The crystalline phases were analyzed by xray diffraction and the microstructure was characterized by scanning electron microscopy and transmission electron microscopy.The chemical bonding states were analyzed by x-ray photoelectron spectroscopy.The gas-sensing performance of WO_(3)/Ag_(3)PO_(4)sensors was systematically explored at room temperature.The composite sensors possessed a higher response and lower detection limit(1 ppm)to NH_(3)than those made of a single type of material;this is ascribed to the synergistic effect achieved by the heterojunction structure.Among the different composite sensors tested,gas sensor A5W5(Ag_(3)PO_(4):WO3mass ratio of 5:5)displayed the highest response to NH_(3)at room temperature.Interestingly,the A5W5 gas sensor exhibited relatively good stability and excellent selectivity to NH_(3).The A5W5 sensor also displayed a relatively good response under high humidity.The gas-sensing mechanism of the WO_(3)/Ag_(3)PO_(4)sensors is explained in detail.Taken together,the as-prepared sensor is highly efficient at detecting NH_(3)and could be suitable for practical applications.In addition,this study also provides a new method for developing Ag_(3)PO_(4)-based sensors in the gas-sensing field.
