Aging Characteristics of Lithium-Ion Battery Under Fast Charging Based on Electrochemical-thermalmechanical Coupling Model

The aging characteristics of lithium-ion battery(LIB)under fast charging is investigated based on an electrochemical-thermal-mechanical(ETM)coupling model.Firstly,the ETM coupling model is established by COMSOL Multiphysics.Subsequently,a long cycle test was conducted to explore the aging characteristics of LIB.Specifically,the effects of charging(C)rate and cycle number on battery aging are analyzed in terms of nonuniform distribution of solid electrolyte interface(SEI),SEI formation,thermal stability and stress characteristics.The results indicate that the increases in C rate and cycling led to an increase in the degree of nonuniform distribution of SEI,and thus a consequent increase in the capacity loss due to the SEI formation.Meanwhile,the increases in C rate and cycle number also led to an increase in the heat generation and a decrease in the heat dissipation rate of the battery,respectively,which result in a decrease in the thermal stability of the electrode materials.In addition,the von Mises stress of the positive electrode material is higher than that of the negative electrode material as the cycling proceeds,with the positive electrode material exhibiting tensile deformation and the negative electrode material exhibiting compressive deformation.The available lithium ion concentration of the positive electrode is lower than that of the negative electrode,proving that the tensile-type fracture occurring in the positive material under long cycling dominated the capacity loss process.The aforementioned studies are helpful for researchers to further explore the aging behavior of LIB under fast charging and take corresponding preventive measures.

Effects of Sunflower Artificial Aging on Seed Vigor and Physiological Characteristics

[Objective]The aim was to study the effects of sunflower artificial aging on seed vigor and physiological characteristics.[Method] The varieties of seed germination capacity,vigor of germination,germination index,vigor index,peroxidase（POD） activity,superoxide dismutase（SOD） activity and malondialdehyde（MDA） content for four sunflower germplasms such as＇SunM20＇,＇Deep Purple Minle＇,＇Da San Kui Hua 4＇and＇Ji Kui 24＇were studied under high temperature and high humidity conditions（100% RH,45 ℃） for different days（0 d,2 d,4 d,6 d,8 d,10 d）.[Result]The result showed that the germination capacity,vigor of germination,germination index,vigor index,POD activity,SOD activity declined gradually with the increase of seed aging days,whereas MDA content enhanced by degrees;The diggerences of resistance to artifical aging existed among the four accessions,＇SunM20＇was the most resistant one,and exhibited the strongest seed vigor,highest activities of two protective enzyme（POD,SOD） and lowest content of MDA at the uniform condition,moreover,the seed vigor and protective enzyme activities of＇SunM20＇changed slowest among the four materials during the aging process.[Conclusion]The distinct reduction of POD,SOD activities maybe the main reasons for the decrease of sunflower seed vigor at the artificial aging,and the gradual accumulation of a few MDA accelerated seeds aging.

Influence of rapid solidification on Sn-8Zn-3Bi alloy characteristics and microstructural evolution of solder/Cu joints during elevated temperature aging

The effects of rapid solidification on the microstructure and melting behavior of the Sn-8Zn-3Bi alloy were studied. The evolution of the microstructuraI characteristics of the solder/Cu joint after an isothermal aging at 150 ℃ was also analyzed to evaluate the interconnect reliability. Results showed that the Bi in Sn-8Zn-3Bi solder alloy completely dissolved in the Sn matrix with a dendritic structure after rapid solidification. Compared with as-solidified Sn-8Zn-3Bi solder alloy, the melting temperature of the rapid solidified alloy rose to close to that of the Sn-Zn eutectic alloy due to the extreme dissolution of Bi in Sn matrix. Meanwhile, the adverse effect on melting behavior due to Bi addition was decreased significantly. The interfacial intermetallic compound （IMC） layer of the solder/Cu joint was more compact and uniform. Rapid solidification process obviously depressed the formation and growth of the interfacial IMC during the high-temperature aging and improved the high-temperature stability of the Sn-8Zn-3Bi solder/Cu joint.

Aging Characteristics on.Epoxy Resin Surface Under Repetitive Microsecond Pulses in Air at Atmospheric Pressure

Research on aging characteristics of epoxy resin （EP） under repetitive microsecond pulses is important for the design of insulating materials in high power apparatus. It is because that very fast transient overvoltage always occurs in a power system, which causes flashover and is one of the main factors causing aging effects of EP materials. Therefore, it is essential to obtain a better understanding of the aging effect on an EP surface resulting from flashover. In this work, aging effects on an EP surface were investigated by surface flashover discharge under repetitive microsecond pulses in atmospheric pressure. The investigations of parameters such as the surface micro-morphology and chemical composition of the insulation material under different degrees of aging were conducted with the aid of measurement methods such as atomic force microscopy （AFM）, scanning electron microscopy （SEM）, and X-ray photoelectron spectroscopy （XPS）. Results showed that with the accumulation of aging energy on the material surface, the particles formed on the material surface increased both in number and size, leading to the growth of surface roughness and a reduction in the water contact angle; the surface also became more absorbent. Furthermore, in the aging process, the molecular chains of EP on the surface were broken, resulting in oxidation and carbonisation.

Effects of Accelerated Aging on Physiological and Biochemical Characteristics of Waxy and Non-waxy Wheat Seeds

Experiments were conducted to evaluate the physiological and the biochemical characteristics of waxy wheat seeds under accelerated aging conditions. Five waxy wheat lines, which were Waxy 1, Waxy 4, Waxy 8, Waxy 9, and Waxy 15; and five non-waxy wheat lines： S-39, 04J89, Jan-81, III42-4, and II110 were studied. The seeds were subjected to accelerated aging at 40℃, 45℃, 50℃, 55℃, and 60℃, and 90% relative humidity for 0, 2, 4, 6, and 8 days, respectively. The results showed a gradual increase in conductivity and decrease in germination rate during accelerated aging. SOD, POD and CAT activities increased at lowgrade treatment, but decreased at severe treatment. On the other hand, the soluble protein content decreased at 45 ℃, but successively increased, then decreased 50℃. From the above study, it showed that 90% RH at 55℃ was the best accelerated aging condition for optimum efficiency in a shorter period.

Effects of Artificial Aging on Physiological Characteristics of Rice Seeds with Different Dormancy Characteristics

In this study,two indica varieties with different dormancy characteristics [4 K58( II-32 B dormant),4 K59( II-32 B) ] and their F2 seeds( C178,C179) obtained through hybridization with sterile line( II-32 A) were used as materials. Different aged seeds( 0,3,6 and 9 d) of these four varieties were acquired by artificial accelerated aging method. Effects of artificial aging on malondialdehyde( MDA) content and catalase( CAT),ascorbate peroxidase( APX),peroxidase( POD) and superoxide dismutase( SOD) activity were investigated. The results showed that with the prolongation of aging time,MDA contents of these four rice varieties increased significantly,while the activity of antioxidant enzymes decreased dramatically. Besides,MDA contents and SOD,CAT and APX activity of the two inbred lines were significantly lower than those of the hybrid varieties. In addition,the activity of antioxidant enzymes in 4 K58 and C178 was significantly lower than that in 4 K59 and C179,respectively. This study indicated that artificial aging treatment significantly inhibited the activity of antioxidant system in seeds,improved membrane lipid peroxidation degree,and thus aggravated the deterioration of seeds. In addition,it also suggested that rice seeds with dormant property were more intolerant to storage.

Effect of UV radiation aging on creepage discharge characteristics of high temperature vulcanized silicon rubber at high altitude

The physicochemical properties and creepage discharge characteristics of aged high temperature Vulca nized(HTV)silicone rubber materials were investigated by ultraviolet radiati on(UV)aging method in this study.The experimental results show that as the aging time increases,the creepage discharge flashover voltage increases first and then decreases.But the aging time has little effect on the creepage discharge inception voltage.With the aging time prolonged,the discharge endurance time of HTV silicone rubber is shortened,and the creepage discharge development velocity is accelerated.In the short time of applying voltage to aging material,the magnitude of discharge in creases rapidly.According to the partial discharge characteristic parameters of creepage discharge,the whole creepage discharge process is partitioned into four stages.Compared with unaged HTV silicone rubber,the aged HTV silicone rubber has less fluctuation in performance parameters and a clear trend.The study found that UV aging not only affects the physicochemical and hydrophobic properties of the HTV silicone rubber,but also accelerates the development of creepage discharge under AC voltage.

Effects of Artificial Aging on Physiological Characteristics and Seed Vigor of Medicago ruthenica Seeds

As shown by the changes in physiological characteristics and seed vigor of three Medicago ruthenica samples during artificial aging process, the germination potential, germination rate, germination index, vigor index and simple vigor index declined with the extension of aging time on the whole. After artificial aging for 6 min, the vigor was higher than that of the control. The conductivity, malondialdehyde content and soluble polysaccharide content of seed leachate increased with the aging time and negatively correlated （ P 〈 0.05） with the seed vigor indicators. The physiological indicators were very significantly correlated （P 〈 0.01 ） with the vigor indicators in the Medicago ruthenica sample from Dorbod Qi, UIanqab City（China）.

Martensite Aging Effect and Thermal Cyclic Characteristics in Ti-Pd and Ti-Pd-Ni High Temperature Shape Memory Alloys

The effect of thermal cycling and aging in martensitic state in Ti-Pd-Ni alloys were investigated by DSC and TEM observations. It is shown that the thermal cycling causes the decreases in M, and Af temperatures in Ti50Pd50-xNix (x=10, 20, 30) alloys, but no obvious thermal cycling effect was observed in Ti50Pd50Pd40Ni10 alloys and the aging effect shows a curious feature, i.e., the Af temperature does not saturate even after relatively long time aging, which is considered to be due to the occurrence of recovery recrystallization during aging.

Aging Characteristics and Influencing Factors of the Sheds of Composite Insulators in Karst Regions of China

In recent years,more and more high-voltage overhead transmission lines were built passing through the karst regions in southwestern China.This type of special landform seems to have an adverse effect on the aging of the sheds of the line suspension composite insulators,which may lead to unexpected flashover and line tripping.In order to find out the particularity of the aging characteristics of insulators operating in the karst regions,samples in operation were selected from both the karst regions and the flatlands.Hydrophobicity,amount of surface contamination,and contaminant composition of the sheds were studied,then a comparison of performance between the two was made,and the possible influencing factors that cause such differences were discussed.The results show that the overall aging of the sheds of the composite insulators operating at the karst regions is more aggravated,which is caused by the combined influence of factors including the special topography,climate,and pollution in the area.The strong wind crossing the col will bring about the mutual scraping on the edges and stress concentration at the root of the sheds,leaving scratches and root cracks;the infiltration from these rupture of acid liquid,if any,will accelerate the aging and corroding of the internal silicone rubber material;moreover,the carbonates enriched on the surface of the sheds will gradually transform into more corrosive sulfates in an acidic environment,leading to further deterioration and chalking of the sheds of the insulators.The research work in this paper can provide guidance for the current operation and maintenance of composite insulators in the karst areas,as well as having important reference values for the layout design and insulation configuration of transmission lines to be built across karst landforms in the future.

Transverse relaxation characteristic and stress relaxation model considering molecular chains of HTPB coating based on pre-strained thermal aging

In order to accurately describe the transverse relaxation characteristic and stress relaxation modulus of HTPB coating during pre-strain thermal aging process,a one month thermal aging test was carried out at70C with pre-strain of 0%,3%,6%and 9%,respectively.The low-field1 H NMR and stress relaxation modulus tests were carried out for HTPB coating at different aging stages.The stress relaxation model considering the molecular chains was proposed according to the changes of crosslinking chain and dangling chain of HTPB coating during pre-strain aging.The results showed that with the increase of aging time,the decay rate of transverse relaxation curve became faster,the transverse relaxation time decreased,the value of combined parameter q Mrl increased,the proportion of crosslinking chain decreased,while the proportion of dangling chain increased.Moreover,the stress relaxation modulus increased,the crosslinking network structure of HTPB coating became denser and the degree of crosslinking increased.At the initial aging stage,the pre-strain will destroy the crosslinking network structure of HTPB coating to a certain extent.With the increase of aging time,the effect of pre-strain will gradually weaken and the influence of aging on materials will gradually increase.The correlations between the stress relaxation model considering the molecular chains and the test results were more than 0.9950,which can accurately describe the stress relaxation modulus of HTPB coating during the pre-strain thermal aging process.

Effect of Age and Breeds of Cattle on Carcass and Meat Characteristics of Arsi, Boran, and Harar Cattle in Ethiopia

The objective of this study was to determine the effect of age and breed of cattle on carcass and meat characteristics in Ethiopia. A total of 39 (Arsi 11, Boran 14 and Harar 14) cattle breeds with age categories of <3, 4 - 6, and 7 - 9 years were used for the study. The bulls were purchased from their respective production system of mixed crop livestock system (Arsi and Harar) and Ranch (Boran). Parameters such as live and carcass weight, meat yield percent, fat characteristics, and primal beef cuts were evaluated. Complete randomized design was used for the study. The live weight of bulls at <3, 4 - 6 and 7 - 9 years ranged 135 - 183, 167 - 181, and 155 - 433 kg, respectively. The carcass weight, dressing percentage, meat yield percent, forequarter, hindquarter, rib eye area, and fat thickness ranged 57 - 209.73 kg, 41.8% - 51.6%, 32% - 58%, 11.7 - 56.42 kg, 14.04 - 45.34 kg, 4.78 - 10.25 square inches and 0.18 - 0.38 inches, respectively. At an early age category (<3 years) meat yield percentage of Arsi, Boran and Harar breeds were 50.86, 30 and 18.72, respectively, and as age category shifted from one age category to the next Harar increased by 13× and Boran by 2.9× and Arsi decreased by -0.93×. The mean rib percentage of Arsi, Boran and Harar were in the range of 7.98 - 9.57, 8.62 - 10.44 and 7.08 - 8.83, respectively. Breed and age of bulls had significantly affected primal meat cuts. Meat yield was predicted from live and hot carcass weight with coefficient determination (R2) of 70.66% and 74.75%, respectively. From the study, it was concluded that age and breeds of cattle had significantly influence on carcass and meat characteristics. Therefore, to determine whether variations were due to genetic or environmental cause’s evaluation of the three breeds under similar feeding condition was recommended.

Emplacement Ages and Geochemical Characteristics of Grabbroic Intrusions and Prospecting Orientation of Related Deposit in Luodian,Guizhou Province

Emplacement ages, geochemical characteristics and analysis of continental dynamics on gabbroic intrusions in Luodian County, Guizhou Province, have been discussed based on studies of isotopic chronology （the whole-rock Sm-Nd and Rb-Sr isochron methods）, major elements, trace elements and PGE. Intrusive activities of the gabbroic intrusions in the study area took place during the Late Yanshanian Orogenic Movement （the Cretaceous Period）, as indicated by the Sm-Nd isochron ages （t）=（99.6±4.5） （2σ） Ma and by the Rb-Sr isochron ages t=（97±1.6） （2σ） Ma. The gabbroic intrusions are attached to mafic rocks in cal-alkaline basaltic series. They occurred as dikes and might be formed under an extensional background of the continent. Differentiation of their magmatic crystallization resulted in obvious zonation of petrography. In the gabbroic intrusions of this study, large ion lithophile elements and LREE are enriched, and the chondrite-normalized REE distribution pattern is leftward inclined without anomalies of JCe or JEu, and there are high concentrations of PGE and ratios of Pd/Ir （averaging 4.21）. All of these imply that their source areas may be basaltic magma in the upper mantle with high-level partial melting, derived from EMl-type enriched mantle. It is different from Emeishan basalt, which may be related to the upper mantle at low-grade partial melting. Emplacement mechanism of the gabbroic intrusions in this study may suppose to be asthenosphere upheaving as an isolated hot wave in the presence of mantle fluid, resulting in basaltic magma intruded into the continental crust as a diapiric intrusion. Therefore, uplifting of faulting-block and extensional deformation could take place in the shallow part of the continental crust while vertical amassing and accretion of magmatic materials in the deep part of the continental crust. These special processes could supposed to be a special background of continental dynamics for this large-scale epithermal metallogenic domain, such as Au, As, Sb and Hg deposits, and vertical uplifting of the Yunnan-Guizhou Plateau in the Cretaceous Period.

Morphological characteristics and atomic evolution behavior of nanojoints in Ag nanowire interconnect network

Ag nanowires(AgNWs)have shown great application value in the field of flexible electronics due to their excellent optical and electrical properties,and the quality of its joints of AgNWs in the thin film network directly plays a key role in its performance.In order to further improve the joint quality of AgNWs under thermal excitation,the thermal welding process and atomic evolution behavior of AgNWs were investigated through a combination of in situ experimental and molecular dynamics simulations.The influence of processing time,temperature,and stress distribution due to spatial arrangement on nanojoints was systematically explored.What is more,the failure mechanisms and their atomic interface behavior of the nanojoints were also investigated.

Age hardening characteristics and mechanical properties of Mg-3.5Dy-4.0Gd-3.1Nd-0.4Zr alloy

Age hardening characteristic and tensile property of Mg-3.5Dy-4.0Gd-3.1Nd-0.4Zr alloy were investigated. The alloy exhibits a considerable age hardening effect up to 250℃. Increasing the aging temperature leads to a shorter aging time to reach the peak hardness and a lower peak hardness. The tensile results show that the peak-aged specimens have higher tensile strength at the temperature below 200℃. However, with the increase of temperature further, the tensile strength decreases dramatically and elongation increases drastically. The loss in tensile strength and increase in elongation at high temperature are possibly associated with the instability of secondary precipitates. The fracture mechanism of alloy transfers from intergranular to transgranular with the increase of experimental temperature.

Geochemical Characteristics of Volcanic Rocks of the Laochang Ag Polymetallic Deposit, Lancang, Yunnan Province, China

In terms of major element, trace element and REE geochemical characteristics of volcanic rocks in the area studied and by making use of the TiO\-2\|K\-2O\|P\-2O\-5, Th\|Hf\|Ta and Zr\|Nb\|Y trianglar diagrams and the environmental discrimination diagrams of incompatible element distribution patterns, the authors have drawn some conclusions that are different from those by previous workers. It is concluded that volcanic rocks in the Laochang Ag polymetallic deposit at Lancang, Yunnan belong to continental within\|plate alkali basalts, and that their geotectonic setting seems to be at the northeastern margin of East Gondwana Land.

Rheological characteristics of aged asphalt binder

Different aging levels(RTFOT,PAV-10h,PAV-20h and PAV-30 h) of asphalt binders with various mass ratios of mineral powder to asphalt(0,0.4,0.8,1.2,1.6,2.0) were used to investigate the rheological properties of aged asphalt binders with respect to their short and long terms aging characteristics.Viscosity test,dynamic shear test and creep test were conducted.The test results indicate that the viscosity of aged asphalt binder increases sharply with the extension of aging period.Complex shear modulus of aged asphalt increases,which indicates that the stiffness of asphalt binders can increase.The phase angle for aged asphalt binders reduces,which indicates that the elastic portion for viscoelastic property of asphalt binders increases.|G*|·sin δ increases after aging procedure which means that the fatigue resistance becomes poor.The creep test results show that creep strain curves varies remarkably for virgin and aged asphalt binders.The total strain during loading period and the permanent strain decreases significantly for aged asphalt binders,which implies that the elastic portion increases and the viscous portion decreases.

Development and Validation of a Laboratory Aging Method for the Accelerated Simulation of Reclaimed Asphalt

The paper presented first results elaborated during the European Research Project Re-road which aims at the development of techniques for increasing the recycling rates of reclaimed asphalt. During service life surface asphalt courses are subjected to aging due to oxidation effects which causes the hardening of the binder and thereby a change in the chemical, physical and mechanical properties of the material. Surface courses often contain highly modified binders as well as special additives for improving the performance characteristics. As these layers inhibit the shortest service lives compared to other road construction layers every year high amounts of reclaimed surface asphalt are available for recycling. The question is raised how the reclaimed asphalt consisting of high quality and costly material components can be recycled for optimal added value. To analyze the asphalt mix service life performance and its recyclability during mix design a laboratory method was developed to simulate the real in-situ aging. First the effects of site aging on the binder and asphalt characteristics were presented. Three laboratory aging methods were discussed which aimed the accelerated aging which meets similar property changes as site aging. At last the effects of two different laboratory aging methods on the same SMA mixture were compared.

The Relationship Among Photoinhibition, Photooxidation and Early Aging at a Late Development Stage in Different Varieties with High Yield

Using six high yield varieties from different ecological districts in China the parameters of Chl fluorescence, the performance of membrane lipid peroxidation and the reduction of Chl content in flag leaf under natural condition at the later developmental stages (from heading stage to mature stage). The results showed that Fv/Fm , decreased gradually, the excessive light energy led to the accumulation of active oxygen O2-, H2O2 and the product of membrane-lipid peroxidation, MDA, which resulted in the reduction of Chl content and early aging due to photooxidation during the course of senescence of flag leaf. This phenomenon varied obviously in rice varieties. When comparina japonica tolerant to photooxidation, Fv/Fm in indica shanyou 63 susceptible to photoxidation decreased significantly. An increase of active oxygen and a sharp drop of Chl content, resulted in 'yellowish' early aging and influenced filling and setting of rice grain. The mechanism on early aging in indica was related to light and temperature conditions in filling stages. On a fine day (above 251), PS Ⅱ reaction center exhibited a dynamic change on revisable inactivation. Under strong midday light, PS Ⅱ function in indica exhibited obvious down-regulation and photoinhibition; Under strong light with low temperature, PS Ⅱ resulted in photodamage, showing early aging, which were related to the degradation of PSⅡ - D1 Protein and the inhibition of the endogenous protecting system such as Xanthophyll cycle and the enzymes of scavenging active oxygen. The results suggested that for a view of high-yield breeding, on the basis of a good type-plant, giving consideration to the utilization of heterosis and resistance to early aging, selecting japonica or a sterile line with japonice genotype as maternal was a breeding strategy worthy of being paid more attention.

Big data assessment on the operating characteristics of on-line taxis and thoughts on relevant policies

A double-dimensional big data assessment method on the characteristics of on-line taxi traffic operation is proposed to provide a scientific basis for carrying out the taxi industry reform and standardizing the on-line taxi hailing management work. Taking Shenzhen as an example, multi- source data such as on-line taxi license plate data, plate identification data and taxi （including on-line taxis） operation data are combined with the results of the stated preference （SP） survey on taxi operating characteristics to assess the overall operation characteristics of on-line taxis. The results show that the current on-line taxis in Shenzhen can be divided into three categories, that is, full-time on-line taxis, non- active on-line taxis and part-time on-line taxis, accounting for 4%, 55%, and 41%, respectively, of the total quantity. In terms of the characteristics of space-time operations, full-time on-line taxis have similar operating characteristics as those of traditional taxis; the operation of non-active on-line taxis and part-time on-line taxis coincides with commuting requirements during morning and evening peak hours. However, part-time on-line taxis operate for a much longer time period at night. Due to the convenient hailing and favorable price, on-line taxis have a significant impact on trip modes of citizens; and the substitution eflbct of on-line taxis on traditional buses and cruising taxis is obvious. It is beneficial for helping the government departments to objectively understand the development law of the on-line taxi industry and providing decision reference for the formulation of relevant management policies during the critical development stage of on-line taxi industry.