Agro-Morphological Characterization of a Collection of Fonio [Digitaria exilis (Kippist.) Stapf.] Accessions from Burkina Faso

Considered as the oldest cereal, fonio (Digitaria exilis Stapf.) is grown in West Africa for its therapeutic virtues, its nutritional and organoleptic qualities. It plays an important socio-cultural and economic role for the populations of western Burkina Faso. However, very few studies on the genetic diversity of fonio have been carried out. This study aims to contribute to a better knowledge of the diversity of Digitaria exilis in Burkina Faso using agro-morphological descriptors. Thus, 60 accessions of fonio collected from western Burkina Faso were characterized using 21 agro-morphological characters according to an Alpha Latice design with three replications. The study showed morphological variability for most of the qualitative and quantitative characters studied. Principal component analysis (PCA) explained 56.07% of the variability. Hierarchical cluster analysis splits the accessions of the collection into four clusters using seven characters. These characters can constitute basic criteria for differentiating fonio accessions in Burkina Faso. The accessions of Group II have a long cycle and high production of grain, while the accessions of Group IV have a short cycle and low production of grain. The groups identified can serve as a starting point for fonio breeding in Burkina Faso.

Agro-Morphological Variability in Eight Bambara Groundnut (Vigna subterranea (L.) Verdc.) Morphotypes from Zinder (Niger)

Bambara groundnut (Vigna subterranea (L.) Verdc.) has economic importance for the producers and the traders as cash crop since it generates substantial income for households in Niger. The objective of this study was to assess eight (8) Bambara groundnut morphotype from Université André Salifou de Zinder in Niger Republic by their morphological and agronomic characters. The experiment was conducted in a randomized complete block design with three replications during the rainy season of 2020-2021. Data were collected on the Number of leaves, Plant height (cm), Growth habit (cm), Terminal leaflet length, Terminal leaflet width, Number of nodes/stem, Number of stems/plant, Number of pods/plant, Weight of 100 pods (g), Weight of 100 seeds (g), Length of seeds (mm), Width of seeds (mm), Weight of seeds/Plot (kg). There were significant differences for all characters, except Number of leaves, Terminal leaflet length, Terminal leaflet width, Length of seeds (mm) Weight of 100 pods (g), Weight of 100 seeds (g). The morphotypes UZ-VZ-04, UZ-VZ-03, UZ-VZ-06, UZ-VZ-02 and UZ-VZ-05 have demonstrated good performance for grain weight per plot and can be useful for a breeding program.

Screening of Sapindus germplasm resources in China based on agro-morphological traits

Sapindus L.species are widely cultivated for biodiesel,biomedical,and biochemical raw materials in southern China.However,yields fuctuate widely due to the lack of high-yielding,high-quality,stable cultivars.Therefore,the objectives of this study were to evaluate three species and one variety among 149 nationwide Sapindus species and screen for elite accessions which would serve as Sapindus breeding materials.Accessions were evaluated on 19 agro-morphological traits by correlation analysis and principal component analysis.These displayed substantial diversity and a broad range of economic traits.In particular,accessions of Sapindus mukorossi and Sapindus rarak had more variation in economic traits than Sapindus delavayi and Sapindus rarak var.velutinus.Increased saponin accumulation may be achieved at the cost of seed oil production.Thirty elite accessions for oil and saponin production,and for comprehensive utilization were screened and accessions no.80,110,and 112 had significant potential to produce high yields.These elite accessions will facilitate the identification of genetic determinants of valuable traits and the effective utilization of trait variability in Sapindus breeding.

Agro-Morphological, Physico-Chemical and Molecular Characterization of Rice Germplasm with Similar Names of Bangladesh

Thirty-one duplicate and similar named rice germplasms of Bangladesh were studied to assess the genetic variation for the agro-morphological and physico-chemical traits and simple sequence repeat banding patterns during 2009–2012 at Bangladesh Rice Research Institute. The range of variations within the cultivar groups showed higher degree. The principal component analysis showed that the first five components with vector values > 1 contributed 82.90% of the total variations. The cluster analysis grouped the genotypes into four clusters, where no duplicate germplasm was found. The highest number(11) of genotypes was constellated in cluster I and the lowest(3) in cluster II. The intra- and inter-cluster distances were the maximum in cluster I(0.93) and between clusters I and IV(24.61), respectively, and the minimum in cluster IV(0.62) and between clusters I and III(5.07), respectively. The cluster mean revealed that the crosses between the genotypes of cluster I with those of clusters II and IV would exhibit high heterosis for maximum good characters. A total of 350 alleles varied from 3(RM277) to 14(RM21) with an average of 7.8 per locus were detected at 45 microsatellite loci across the 31 rice accessions. The gene diversity ranged from 0.48 to 0.90 with an average of 0.77, and the polymorphism information content values from 0.44(RM133) to 0.89(RM206) with an average of 0.74. RM206, RM21, RM55, RM258 and RM433 were considered as the best markers on the basis of their higher polymorphism information content values. The dendrogram from unweighted pair-group method with arithmetic average clustering also classified the genotypes into four groups, where group IV comprised of 20 genotypes and group III of one genotype, but no duplicate was found. Finally, similar and duplicate named rice germplasms need to be conserved in gene bank as are distinct from each other.

Characterization of chickpea germplasm conserved in the Indian National Genebank and development of a core set using qualitative and quantitative trait data

Chickpea is the third most important pulse crop as a source of dietary protein. Ever-increasing demand in Asian countries calls for breeding superior desi-type varieties, in turn necessitating the availability of characterized germplasm to breeders. The Indian National Genebank,located at the National Bureau of Plant Genetic Resources, New Delhi, conserves 14,651 accessions of chickpea. The entire set was characterized in a single large-scale experiment.High variation was observed for eight quantitative and 12 qualitative agro-morphological traits. Allelic richness procedure was employed to assemble a core set comprising 1103 accessions, 70.0% of which were of Indian origin. Comparable values of total variation explained by the first three principal components in the entire collection(51.1%) and the core(52.4%)together with conservation of nine pairwise r values among quantitative traits in the core collection and a coincidence rate around 99.7% indicated that the chickpea core was indeed an excellent representation of the entire chickpea collection in the National Genebank. The chickpea core exhibited greater diversity than the entire collection in agro-morphological traits, as assessed by higher variance and Shannon–Weaver diversity indices, indicating that the chickpea core maximized the phenotypic diversity available in the Indian chickpea germplasm. The chickpea core, comprising mainly indigenous desi genotypes, is expected to be an excellent resource for chickpea breeders. Information on the chickpea core can be accessed at http://www.nbpgr.ernet.in/pgrportal.

Barnyard millet global core collection evaluation in the submontane Himalayan region of India using multivariate analysis

Barnyard millet(Echinochloa spp.) is one of the most underresearched crops with respect to characterization of genetic resources and genetic enhancement. A total of 95 germplasm lines representing global collection were evaluated in two rainy seasons at Almora,Uttarakhand, India for qualitative and quantitative traits and the data were subjected to multivariate analysis. High variation was observed for days to maturity, five-ear grain weight, and yield components. The first three principal component axes explained 73% of the total multivariate variation. Three major groups were detected by projection of the accessions on the first two principal components. The separation of accessions was based mainly on trait morphology. Almost all Indian and origin-unknown accessions grouped together to form an Echinochloa frumentacea group. Japanese accessions grouped together except for a few outliers to form an Echinochloa esculenta group. The third group contained accessions from Russia, Japan, Cameroon, and Egypt. They formed a separate group on the scatterplot and represented accessions with lower values for all traits except basal tiller number. The interrelationships between the traits indicated that accessions with tall plants, long and broad leaves, longer inflorescences, and greater numbers of racemes should be given priority as donors or parents in varietal development initiatives. Cluster analysis identified two main clusters based on agro-morphological characters.

Morphological Diversity of Corn’s (<i>Zea mays</i>L.) Local Cultivar and Improved Varieties in Central and North of Benin

The better knowledge of a plant genetic biodiversity is based on a prior study of its agro-morphological characteristics. The objective of this study was to investigate the morphological diversity of maize accessions and its structure on the basis of 14 variables. For the experimentation, 43 and 98 maize accessions were planted in three replicates respectively in central and northern Benin following an incomplete randomized block. The mixed model analysis of two factors variance revealed a significant difference for all accessions considering each agro-morphological characteristic evaluated except the germination day of two areas seed accessions. The numerical classification grouped the accessions into four groups in each zone. The stepwise discriminant analysis showed that early characters related to plant height and ear insertion were the variables that discriminated accessions in both zones. Maturity and recovery ears, sensitivity to streak and the germination days are the variables that discriminate accessions of the two areas. These results provide a database for the creation of improved maize varieties that meet the needs of

Multivariate Based Variability within Diverse Indian Mustard (<i>Brassica juncea</i>L.) Genotypes

Indian mustard (Brassica juncea L.) germplasm consisting 167 accessions including one check cultivar was evaluated for qualitative and quantitative traits. The present study was conducted to investigate genetic diversity and correlation among studied genotypes of B. juncea L. based on agro-morphological at NARC, Islamabad, Pakistan. To investigate the genetic diversity based on morphological characters, data was recorded on 20 quantitative and 12 qualitative traits. The calculated data was analyzed through two complementary methods, i.e. PCA (Principal Component Analysis) and cluster analysis. Among all the studied cultivars, significant diversity was recorded for different agro-morphological characters. Among all the parameters, maximum variance was recorded for pod shattering (427.2) followed by plant height (345.6), days to 100% flowering (336.2) and main raceme length (210.0). Among all the characters, the greatest and highly significant association (0.99) was found between days to maturity 50% and days to maturity 100% followed by correlation (0.86) among days to flowering 50% and days to flowering 100%, correlation value (0.71) was calculated among leaf length and leaf width. Using cluster analysis all the genotypes were divided into five major groups. It was observed that 7 out of 20 principal components with an Eigen value of ≥1.0 calculated for 73.92% of the total diversity observed between 167 accessions of Indian mustard (B. juncea L.). The contribution of first three PCs in the total PCs was 23.25, 12.87 and 11.24, respectively. Among all the investigated accessions two genotypes 26,813 and 26,817 showed great potential for seeds/silique, 1000-seed weight and seed yield/plant, respectively, so these genotypes are recommended for future breeding programs for achieving promising results.