The influence of cathodic pulse parameters was evaluated on plasma electrolytic oxidation(PEO)coatings grown on 7075 aluminum alloy in a silicate-based electrolyte containing potassium titanyl oxalate(PTO)using pulsed...The influence of cathodic pulse parameters was evaluated on plasma electrolytic oxidation(PEO)coatings grown on 7075 aluminum alloy in a silicate-based electrolyte containing potassium titanyl oxalate(PTO)using pulsed bipolar waveforms with various cathodic duty cycles and cathodic current densities.The coatings were characterized by SEM,EDS,and XRD.EIS was applied to investigate the electrochemical properties.It was observed that the increase of cathodic duty cycle and cathodic current density from 20%and 6 A/dm^(2) to 40%and 12 A/dm^(2) enhances the growth rate of the inner layer from 0.22 to 0.75μm/min.Adding PTO into the bath showed a fortifying effect on influence of the cathodic pulse and the mentioned change of cathodic pulse parameters,resulting in an increase of the inner layer growth rate from 0.25 to 1.10μm/min.Based on EDS analysis,Si and Ti were incorporated dominantly in the upper parts of the coatings.XRD technique merely detectedγ-Al_(2)O_(3),and there were no detectable peaks related to Ti and Si compounds.However,the EIS results confirmed that the incorporation of Ti^(4+)into alumina changed the electronic properties of the coating.The coatings obtained from the bath containing PTO using the bipolar waveforms with a cathodic duty cycle of 40%and current density values higher than 6 A/dm^(2) showed highly appropriate electrochemical behavior during 240 d of immersion due to an efficient repairing mechanism.Regarding the effects of studied parameters on the coating properties,the roles of cathodic pulse parameters and PTO in the PEO process were highlighted.展开更多
Silane coupling agent KH560 was used to modify the surface of nano-α-Al<sub>2</sub>O<sub>3</sub> in ethanol-aqueous solution with different proportions. The particle size of nano-α-Al<sub&...Silane coupling agent KH560 was used to modify the surface of nano-α-Al<sub>2</sub>O<sub>3</sub> in ethanol-aqueous solution with different proportions. The particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> was determined by nano-particle size analyzer, and the effects of nano-α-Al<sub>2</sub>O<sub>3</sub> content, ethanol-aqueous solution ratio and KH560 dosage on the dispersion and particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> were investigated. The material structure before and after modification was determined by Fourier transform infrared spectroscopy (FTIR). Aqueous polyurethane resin and inorganic components are combined with modified nano-α-Al<sub>2</sub>O<sub>3</sub> dispersion to form chromium-free passivation solution. The solution is coated on the galvanized sheet, the adhesion and surface hardness are tested, the bonding strength of the coating and the surface hardness of the substrate are discussed. The corrosion resistance and surface morphology of the matrix were investigated by electrochemical test, neutral salt spray test and scanning electron microscope test. The chromium-free passivation film formed after the modification of nano-α-Al<sub>2</sub>O<sub>3</sub> increases the surface hardness of galvanized sheet by about 85%. The corrosion resistance of the film is better than that of a single polyurethane film. The results show that the surface hardness and corrosion resistance of polyurethane resin composite passivation film are significantly improved by the introduction of nano-α-Al<sub>2</sub>O<sub>3</sub>.展开更多
High-quality LDH-NO_3-CO_3 whiskers were synthesized via a liquid precipitation method using Mg(NO_3)_2·6H_2O and Al(NO_3)_3·9H_2O as raw materials and Na_2CO_3-NaHCO_3 buffer solutions as precipitant. The w...High-quality LDH-NO_3-CO_3 whiskers were synthesized via a liquid precipitation method using Mg(NO_3)_2·6H_2O and Al(NO_3)_3·9H_2O as raw materials and Na_2CO_3-NaHCO_3 buffer solutions as precipitant. The whiskers were characterized by X-ray diffraction, transmission electron microscope, and Brunauer-Emmett-Teller N_2 surface area measurement. The influence of buffer solution concentration on the characteristics of the sample was investigated. The results show that the buffer solution concentration has significant impact on whiskers with intercalated structure. Overall, LDH-NO_3-CO_3 whiskers with well-defined geometry, distinct intercalated structure, high quality, and good dispersion capability can be obtained under the following conditions: buffer solution volumetric ratio of 60%, reaction temperature of 55°C, and reaction time of 269 h.展开更多
Vanillin 1, 2-propylene glycol acetal was synthesized from vanillin and 1, 2-propylene glycol using H3PMo6W6O40·nH2O as catalyst, The factors influencing the synthesis were discussed and the better reaction condi...Vanillin 1, 2-propylene glycol acetal was synthesized from vanillin and 1, 2-propylene glycol using H3PMo6W6O40·nH2O as catalyst, The factors influencing the synthesis were discussed and the better reaction conditions were found as follows： The amount of vanillin was 3.8 g, the molar ratio of vanillin was 1, 2-propylene glycol 1.0 to 2.4, the amount of catalyst was 1.6% in proportion to the total reacting materials, the volume ofcyclohexane as the water-carrying agent 4 mL, the refluxing time was 2 h at 88-96℃ and thus the product yield reached over 87%. The results show that the catalyst＇s activity is high and the reaction time is short.展开更多
文摘The influence of cathodic pulse parameters was evaluated on plasma electrolytic oxidation(PEO)coatings grown on 7075 aluminum alloy in a silicate-based electrolyte containing potassium titanyl oxalate(PTO)using pulsed bipolar waveforms with various cathodic duty cycles and cathodic current densities.The coatings were characterized by SEM,EDS,and XRD.EIS was applied to investigate the electrochemical properties.It was observed that the increase of cathodic duty cycle and cathodic current density from 20%and 6 A/dm^(2) to 40%and 12 A/dm^(2) enhances the growth rate of the inner layer from 0.22 to 0.75μm/min.Adding PTO into the bath showed a fortifying effect on influence of the cathodic pulse and the mentioned change of cathodic pulse parameters,resulting in an increase of the inner layer growth rate from 0.25 to 1.10μm/min.Based on EDS analysis,Si and Ti were incorporated dominantly in the upper parts of the coatings.XRD technique merely detectedγ-Al_(2)O_(3),and there were no detectable peaks related to Ti and Si compounds.However,the EIS results confirmed that the incorporation of Ti^(4+)into alumina changed the electronic properties of the coating.The coatings obtained from the bath containing PTO using the bipolar waveforms with a cathodic duty cycle of 40%and current density values higher than 6 A/dm^(2) showed highly appropriate electrochemical behavior during 240 d of immersion due to an efficient repairing mechanism.Regarding the effects of studied parameters on the coating properties,the roles of cathodic pulse parameters and PTO in the PEO process were highlighted.
文摘Silane coupling agent KH560 was used to modify the surface of nano-α-Al<sub>2</sub>O<sub>3</sub> in ethanol-aqueous solution with different proportions. The particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> was determined by nano-particle size analyzer, and the effects of nano-α-Al<sub>2</sub>O<sub>3</sub> content, ethanol-aqueous solution ratio and KH560 dosage on the dispersion and particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> were investigated. The material structure before and after modification was determined by Fourier transform infrared spectroscopy (FTIR). Aqueous polyurethane resin and inorganic components are combined with modified nano-α-Al<sub>2</sub>O<sub>3</sub> dispersion to form chromium-free passivation solution. The solution is coated on the galvanized sheet, the adhesion and surface hardness are tested, the bonding strength of the coating and the surface hardness of the substrate are discussed. The corrosion resistance and surface morphology of the matrix were investigated by electrochemical test, neutral salt spray test and scanning electron microscope test. The chromium-free passivation film formed after the modification of nano-α-Al<sub>2</sub>O<sub>3</sub> increases the surface hardness of galvanized sheet by about 85%. The corrosion resistance of the film is better than that of a single polyurethane film. The results show that the surface hardness and corrosion resistance of polyurethane resin composite passivation film are significantly improved by the introduction of nano-α-Al<sub>2</sub>O<sub>3</sub>.
文摘High-quality LDH-NO_3-CO_3 whiskers were synthesized via a liquid precipitation method using Mg(NO_3)_2·6H_2O and Al(NO_3)_3·9H_2O as raw materials and Na_2CO_3-NaHCO_3 buffer solutions as precipitant. The whiskers were characterized by X-ray diffraction, transmission electron microscope, and Brunauer-Emmett-Teller N_2 surface area measurement. The influence of buffer solution concentration on the characteristics of the sample was investigated. The results show that the buffer solution concentration has significant impact on whiskers with intercalated structure. Overall, LDH-NO_3-CO_3 whiskers with well-defined geometry, distinct intercalated structure, high quality, and good dispersion capability can be obtained under the following conditions: buffer solution volumetric ratio of 60%, reaction temperature of 55°C, and reaction time of 269 h.
文摘Vanillin 1, 2-propylene glycol acetal was synthesized from vanillin and 1, 2-propylene glycol using H3PMo6W6O40·nH2O as catalyst, The factors influencing the synthesis were discussed and the better reaction conditions were found as follows： The amount of vanillin was 3.8 g, the molar ratio of vanillin was 1, 2-propylene glycol 1.0 to 2.4, the amount of catalyst was 1.6% in proportion to the total reacting materials, the volume ofcyclohexane as the water-carrying agent 4 mL, the refluxing time was 2 h at 88-96℃ and thus the product yield reached over 87%. The results show that the catalyst＇s activity is high and the reaction time is short.
