期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
Al-AlN-Al_2O_3复相滑板的开发与应用性能 被引量:18
1
作者 卜景龙 于之东 +3 位作者 杨晓春 王志发 王瑞生 王榕林 《钢铁钒钛》 CAS 北大核心 2004年第4期24-28,共5页
以80%~90%板状刚玉、10%~20%金属铝为主要原料,采用1100℃的高温氮化反应烧结工艺,并经800℃的表面氧化处理,可制得以金属铝、氮化铝为结合相、以刚玉为主晶相的Al-AlN-Al2O3复相结构材料。以其作为钢包滑动水口的滑板材质,取得了良... 以80%~90%板状刚玉、10%~20%金属铝为主要原料,采用1100℃的高温氮化反应烧结工艺,并经800℃的表面氧化处理,可制得以金属铝、氮化铝为结合相、以刚玉为主晶相的Al-AlN-Al2O3复相结构材料。以其作为钢包滑动水口的滑板材质,取得了良好的应用效果。试验结果表明:熔融金属铝对刚玉颗粒间隙的填充,金属铝氮化及使用时金属铝氧化过程的体积膨胀效应,是获得滑板致密组织结构的主要原因。Al-AlN-Al2O3复相滑板的抗钢液侵蚀性能及抗热震性能优良,其使用寿命是Al2O3-C滑板的2倍。 展开更多
关键词 al2O3 滑板 刚玉 侵蚀性能 金属铝 主晶相 填充 钢液 滑动水口 钢包
下载PDF
Effects of Particle Size and Content of Silicon Powder on Strength and Microstructure of Coked Al_2O_3-ZrO_2-C Refractories
2
作者 FANG Lei LI Yawei +2 位作者 YANG Guangju YANG Kaibao YU Shuzhong 《China's Refractories》 CAS 2008年第2期6-11,共6页
Effects of particle size (A:d50 = 336. 9 μm, B:d50 =123.5μm, C: d50=19.5 μm, D: dso=2.21μm) and content (1 wt% , 3 wt% , 5 wt% , 7 wt% ) of silicon powder on cold crushing strength (CCS) , pore size dis... Effects of particle size (A:d50 = 336. 9 μm, B:d50 =123.5μm, C: d50=19.5 μm, D: dso=2.21μm) and content (1 wt% , 3 wt% , 5 wt% , 7 wt% ) of silicon powder on cold crushing strength (CCS) , pore size distribution and microstructure of Al2O3 - ZrO2 - C refractories coked at high temperature had been investigated by means of mercury porosimeter, SEM, EDS, tic. The results indicated that particle size and content of silicon powder affected the cold crushing strength of coked specimens. It increased with the addition of silicon powder and its finer particle size. However, it decreased greatly when using too fine silicon powder. The particle size and content of silicon powder also impacted the phase evolution and microstructure of coked specimens, much more β-SiC whiskers constituted network structure and well distributed in specimens with reduction of their slenderness ratios when finer silicon powder was added, corresponding to that, the specimens' pore size distribution range became narrower with smaller pore diameter, but β-SiC whiskers were distributed sparsely and the specific pore volume of small pores increased when much finer powder was added. It was worthly mentioned that some nitride could form in specimens with addition of appropriate particle size and content of silicon powder. 展开更多
关键词 Particle size of silicon powder Pore size distribution al2O3-ZrO2-C slide plate β-Sic whiskers nitride
下载PDF
金属氮化结合Al2O3-ZrO2-C滑板的生产应用实践 被引量:1
3
作者 徐香汝 杨阳 《首钢科技》 2009年第3期37-40,43,共5页
以板状刚玉、锆刚玉和金属铝为主要原料,采用1000℃高温氮化反应烧结工艺,可制得以金属铝和AlN为结合相、以刚玉和斜锆石为主晶相的Al-AlN-Al2O3-ZrO2-C复相结合材料,以其作为钢包滑动水口的滑板材质,取得了良好的应用效果。该滑板... 以板状刚玉、锆刚玉和金属铝为主要原料,采用1000℃高温氮化反应烧结工艺,可制得以金属铝和AlN为结合相、以刚玉和斜锆石为主晶相的Al-AlN-Al2O3-ZrO2-C复相结合材料,以其作为钢包滑动水口的滑板材质,取得了良好的应用效果。该滑板具有较好的抗钢液侵蚀、抗热震以及抗渣侵性能。 展开更多
关键词 金属铝 刚玉 aln 氮化物 滑板
下载PDF
金属-氮化物结合刚玉滑板的制备与性能研究 被引量:4
4
作者 田养利 尹洪峰 马艳龙 《硅酸盐通报》 CAS CSCD 北大核心 2009年第4期805-809,共5页
以板状刚玉和金属铝粉为主要原料制备了金属-氮化物结合刚玉滑板,借助XRD和SEM等研究了铝粉加入量、加入粒度、氮化温度以及莫来石钛酸铝复相原料对滑板材料性能的影响。结果表明:(1)以板状刚玉和金属铝粉为主要原料,可以制得金属-氮化... 以板状刚玉和金属铝粉为主要原料制备了金属-氮化物结合刚玉滑板,借助XRD和SEM等研究了铝粉加入量、加入粒度、氮化温度以及莫来石钛酸铝复相原料对滑板材料性能的影响。结果表明:(1)以板状刚玉和金属铝粉为主要原料,可以制得金属-氮化物结合刚玉滑板材料;(2)金属铝粉加入量为12%时综合性能较好;(3)铝粉以两种粒度混合引入,滑板具有好的综合性能,氮化温度1000℃即可;(4)引入适量的莫来石-钛酸铝复相材料可提高滑板材料的热震稳定性。 展开更多
关键词 铝粉 氮化物 滑板 板状刚玉 性能
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部