PEO ceramic coatings including ZrO_2-Al_2O_3-SiO_2 in three phases were prepared on an Al-12.5%Si alloy in electrolyte solutions containing ZrO_2 nanoparticles. The microstructures and phases of the coatings were anal...PEO ceramic coatings including ZrO_2-Al_2O_3-SiO_2 in three phases were prepared on an Al-12.5%Si alloy in electrolyte solutions containing ZrO_2 nanoparticles. The microstructures and phases of the coatings were analyzed by SEM and XRD, and the heat insulation performance and the thermal shock resistance of the coatings were investigated. The compactness of the coating increased significantly and the hindrance of the Si element on plasma electrolytic oxidation process was effectively weakened. The growth rate of the coating was improved substantially with the addition of ZrO_2 nanoparticles. The PEO ceramic coatings are primarily composed of SiO_2 and high temperature steady phases such as a-Al_2O_3 and c-ZrO_2. Both the content of c-ZrO_2 and the heat-insulating property of the coating increased significantly. The ceramic coatings with special microstructure and composition formed in the solutions containing ZrO_2 nanoparticles possess excellent heat insulation performance and thermal shock resistance.展开更多
Macrosegregations and microstructures of Al-7%Si alloy solidified under complex of fects of magnetic field and centrifugal forces are studied by means of a set of selfdesigned electromagnetic centrifugal casting (EMC...Macrosegregations and microstructures of Al-7%Si alloy solidified under complex of fects of magnetic field and centrifugal forces are studied by means of a set of selfdesigned electromagnetic centrifugal casting (EMCC) device. It is shown that electromagnetic field (EMF) has an important effect on the macrosegregation of centrifugal casting specimen of Al-7%Si alloy in two respects: one is that there exists always a kind of convection in the liquid in front of the S/L interface caused by effect ofthe electromagnetic force; the other is that different atomic clusters of solidparticles with different physical characteristics are subjected to quite different electromagnetic (Lorentz) force. Therefore, their movements get changed. In addition, the formation process of a complex band structure consisting of primary α-Al dendrites and (α-Al+β-Si) eutectics in hypoeutectic Al-Si alloys during EMCC and the effect of EMF are discussed.展开更多
The grain growth behavior of spray-formed Al-70wt.%Si alloys was studied in the semi-solid state. The specimens were isothermally heat-treated at various temperatures between the solidus and liquidus of Al-Si alloys a...The grain growth behavior of spray-formed Al-70wt.%Si alloys was studied in the semi-solid state. The specimens were isothermally heat-treated at various temperatures between the solidus and liquidus of Al-Si alloys and then quenched in water. The microstructure of reheated specimens was characterized using optical and scanning electron microscopies. The isothermal holding experiment was carried out to investigate grain growth behavior as a function of holding time and temperature in the semi-solid state. The coarsening mechanism and the effect of porosity on microstructure were also studied.展开更多
In the present study, the tested hypereutectic Al-21 wt.%Si alloys were prepared by modifying the melt using different proportions of P and Ce, and then applying T6 heat treatment. The modif ication effects and mechan...In the present study, the tested hypereutectic Al-21 wt.%Si alloys were prepared by modifying the melt using different proportions of P and Ce, and then applying T6 heat treatment. The modif ication effects and mechanism of P+Ce complex modif ier on the Si phase of hypereutectic Al-21 wt.%Si alloy were studied, and the aging precipitation behavior after modif ication was characterized by means of tensile strength measurement, OM, SEM and TEM analysis. The results show that the massive primary silicon phase particles are signif icantly ref ined after modif ication, while the needle-like eutectic silicon crystals become f ibrous and short. It was found that the mechanism of phosphorus modifi cation on the primary silicon can be attributed to heterogeneous nucleation of Al P, while the modification mechanism of Ce can be explained by adsorbing-twinning theory. In the aged microstructure of the modif ied hypereutectic Al-21 wt.%Si alloy, there existed some strengthening phases such as Al4Cu9, Al2 Cu, AlC u3, and Al57Mn12. The P+Ce complex modif ier not only affected the size of primary silicon and eutectic silicon, but also the aging behavior of alloys under the heat treatment process. When Al-21 wt.%Si alloy was modif ied using 0.08%wt.P + 0.6wt.% Ce, the aging precipitates were dispersed uniformly in the alloy, and its mechanical properties at room and elevated temperatures are optimized(Rm = 287.6 MPa at RT, Rm = 210 MPa at 300 ℃).展开更多
基金Funded by the National Natural Science Foundation of China(Nos.51401155 and 51771140)Key Research and Development Plan in Shaanxi(No.2018GY-111)+1 种基金Shaanxi Provincial Department of Education Industrialization Cultivation Project(No.17JF009)Yulin Science and Technology Project(No.2016-16-4)and Shaanxi Science and Technology Co-ordination Innovation Project(No.2016KTZDGY-04-01)
文摘PEO ceramic coatings including ZrO_2-Al_2O_3-SiO_2 in three phases were prepared on an Al-12.5%Si alloy in electrolyte solutions containing ZrO_2 nanoparticles. The microstructures and phases of the coatings were analyzed by SEM and XRD, and the heat insulation performance and the thermal shock resistance of the coatings were investigated. The compactness of the coating increased significantly and the hindrance of the Si element on plasma electrolytic oxidation process was effectively weakened. The growth rate of the coating was improved substantially with the addition of ZrO_2 nanoparticles. The PEO ceramic coatings are primarily composed of SiO_2 and high temperature steady phases such as a-Al_2O_3 and c-ZrO_2. Both the content of c-ZrO_2 and the heat-insulating property of the coating increased significantly. The ceramic coatings with special microstructure and composition formed in the solutions containing ZrO_2 nanoparticles possess excellent heat insulation performance and thermal shock resistance.
文摘Macrosegregations and microstructures of Al-7%Si alloy solidified under complex of fects of magnetic field and centrifugal forces are studied by means of a set of selfdesigned electromagnetic centrifugal casting (EMCC) device. It is shown that electromagnetic field (EMF) has an important effect on the macrosegregation of centrifugal casting specimen of Al-7%Si alloy in two respects: one is that there exists always a kind of convection in the liquid in front of the S/L interface caused by effect ofthe electromagnetic force; the other is that different atomic clusters of solidparticles with different physical characteristics are subjected to quite different electromagnetic (Lorentz) force. Therefore, their movements get changed. In addition, the formation process of a complex band structure consisting of primary α-Al dendrites and (α-Al+β-Si) eutectics in hypoeutectic Al-Si alloys during EMCC and the effect of EMF are discussed.
文摘The grain growth behavior of spray-formed Al-70wt.%Si alloys was studied in the semi-solid state. The specimens were isothermally heat-treated at various temperatures between the solidus and liquidus of Al-Si alloys and then quenched in water. The microstructure of reheated specimens was characterized using optical and scanning electron microscopies. The isothermal holding experiment was carried out to investigate grain growth behavior as a function of holding time and temperature in the semi-solid state. The coarsening mechanism and the effect of porosity on microstructure were also studied.
基金funded by the National Natural Science Foundation of China(51371077)
文摘In the present study, the tested hypereutectic Al-21 wt.%Si alloys were prepared by modifying the melt using different proportions of P and Ce, and then applying T6 heat treatment. The modif ication effects and mechanism of P+Ce complex modif ier on the Si phase of hypereutectic Al-21 wt.%Si alloy were studied, and the aging precipitation behavior after modif ication was characterized by means of tensile strength measurement, OM, SEM and TEM analysis. The results show that the massive primary silicon phase particles are signif icantly ref ined after modif ication, while the needle-like eutectic silicon crystals become f ibrous and short. It was found that the mechanism of phosphorus modifi cation on the primary silicon can be attributed to heterogeneous nucleation of Al P, while the modification mechanism of Ce can be explained by adsorbing-twinning theory. In the aged microstructure of the modif ied hypereutectic Al-21 wt.%Si alloy, there existed some strengthening phases such as Al4Cu9, Al2 Cu, AlC u3, and Al57Mn12. The P+Ce complex modif ier not only affected the size of primary silicon and eutectic silicon, but also the aging behavior of alloys under the heat treatment process. When Al-21 wt.%Si alloy was modif ied using 0.08%wt.P + 0.6wt.% Ce, the aging precipitates were dispersed uniformly in the alloy, and its mechanical properties at room and elevated temperatures are optimized(Rm = 287.6 MPa at RT, Rm = 210 MPa at 300 ℃).
