An approach named direct reaction synthesis (DRS) has been developed to fabricate particulate composites with an extremely fine reinforcement size. ID situ Al matrix composites were fabri-cated by DRS. Extensive analy...An approach named direct reaction synthesis (DRS) has been developed to fabricate particulate composites with an extremely fine reinforcement size. ID situ Al matrix composites were fabri-cated by DRS. Extensive analysis of the composites microstructure using SEM and TEM identify that the reinforcement formed during the DRS process is Ti carbide (TiC) particle, generally less than 1.0 μm. The reacted, semisolid extruded samples exhibit a homogeneous distribution of fine TiC particles in Al-Cu matrix, Mechanical property evaluation of the composites has revealed a very high tensile strength relative to the matrix alloy. Fractographic analysis indicates ductile failure although the ductility and strength are limited by the presence of coarse titanium aluminides (Al3Ti).展开更多
The performance of Al-Ti-C master alloy in refining Al-10Mg and Al-5Cu alloys was studied by using electron probe micro-analyzer （EPMA） and X-ray diffractometer （XRD） analysis. The results indicate that there are ...The performance of Al-Ti-C master alloy in refining Al-10Mg and Al-5Cu alloys was studied by using electron probe micro-analyzer （EPMA） and X-ray diffractometer （XRD） analysis. The results indicate that there are obvious fading phenomena in both Al-10Mg and Al-5Cu alloys with the addition of Al-5Ti-0.4C refiner which contains TiC and TiAl3 compounds. Mg element has no influence on the stability of TiC and TiAl3, while TiC particles in Al-10Mg alloy react with Al to form Al4C3 particles, resulting in the refinement fading. However, TiC particles are relatively stable in Al-5Cu alloy, while TiAl3 phase reacts with Al2Cu to produce a new phase Ti（Al, Cu）2, which is responsible for the refinement fading in Al-5Cu alloy. These indicate that the refinement fading will not occur only when both the TiC particles and TiAl3 compound of Al-Ti-C refiner are stable in Al alloys.展开更多
The influence of in-situ synthesized TiC nanoparticles on age-hardening behavior of Al–Cu alloys was investigated in Al–4.5 Cu–1.5 TiC alloy. It was found that TiC nanoparticles decrease the peak-age time effective...The influence of in-situ synthesized TiC nanoparticles on age-hardening behavior of Al–Cu alloys was investigated in Al–4.5 Cu–1.5 TiC alloy. It was found that TiC nanoparticles decrease the peak-age time effectively, from about 20 h for Al–4.5 Cu alloy decreasing to about 12 h for the Al–4.5 Cu–1.5 TiC. Mechanical property test shows that the age-hardening effect has been improved by the TiC nanoparticles. The increment of yield strength before and after aging is about 84 MPa for Al–4.5 Cu, while, it reaches to about113 MPa for the Al–4.5 Cu–1.5 TiC. After aging heat treatment, precipitates have been observed both in matrix and around TiC nanoparticles. Due to the difference of coefficient of thermal expansion between TiC and Al, high density dislocations in the Al–4.5 Cu–1.5 TiC were generated during water quenching after solution. Dislocations play a role of diffusion path for Cu atoms during aging, which reduces the peak-age time. Alpha-Al lattice distortion resulted from lattice mismatch of TiC/Al interface induces the precipitation of θ' phase around TiC nanoparticles, which increases the number density of θ' and improves the age-hardening effect. This finding is supposed to be also applicable to alloy systems of Al–Cu–Mg,Al–Cu–Mg–Li, Al–Cu–Mg–Ag, etc.展开更多
文摘An approach named direct reaction synthesis (DRS) has been developed to fabricate particulate composites with an extremely fine reinforcement size. ID situ Al matrix composites were fabri-cated by DRS. Extensive analysis of the composites microstructure using SEM and TEM identify that the reinforcement formed during the DRS process is Ti carbide (TiC) particle, generally less than 1.0 μm. The reacted, semisolid extruded samples exhibit a homogeneous distribution of fine TiC particles in Al-Cu matrix, Mechanical property evaluation of the composites has revealed a very high tensile strength relative to the matrix alloy. Fractographic analysis indicates ductile failure although the ductility and strength are limited by the presence of coarse titanium aluminides (Al3Ti).
基金This work was financially supported by the National Natural Science Foundation of China (No.50171037).
文摘The performance of Al-Ti-C master alloy in refining Al-10Mg and Al-5Cu alloys was studied by using electron probe micro-analyzer （EPMA） and X-ray diffractometer （XRD） analysis. The results indicate that there are obvious fading phenomena in both Al-10Mg and Al-5Cu alloys with the addition of Al-5Ti-0.4C refiner which contains TiC and TiAl3 compounds. Mg element has no influence on the stability of TiC and TiAl3, while TiC particles in Al-10Mg alloy react with Al to form Al4C3 particles, resulting in the refinement fading. However, TiC particles are relatively stable in Al-5Cu alloy, while TiAl3 phase reacts with Al2Cu to produce a new phase Ti（Al, Cu）2, which is responsible for the refinement fading in Al-5Cu alloy. These indicate that the refinement fading will not occur only when both the TiC particles and TiAl3 compound of Al-Ti-C refiner are stable in Al alloys.
基金financially supported by the Key Program of the National Natural Science Foundation of China (No. 51731007)the National Natural Science Foundation of China (No. 51501092)
文摘The influence of in-situ synthesized TiC nanoparticles on age-hardening behavior of Al–Cu alloys was investigated in Al–4.5 Cu–1.5 TiC alloy. It was found that TiC nanoparticles decrease the peak-age time effectively, from about 20 h for Al–4.5 Cu alloy decreasing to about 12 h for the Al–4.5 Cu–1.5 TiC. Mechanical property test shows that the age-hardening effect has been improved by the TiC nanoparticles. The increment of yield strength before and after aging is about 84 MPa for Al–4.5 Cu, while, it reaches to about113 MPa for the Al–4.5 Cu–1.5 TiC. After aging heat treatment, precipitates have been observed both in matrix and around TiC nanoparticles. Due to the difference of coefficient of thermal expansion between TiC and Al, high density dislocations in the Al–4.5 Cu–1.5 TiC were generated during water quenching after solution. Dislocations play a role of diffusion path for Cu atoms during aging, which reduces the peak-age time. Alpha-Al lattice distortion resulted from lattice mismatch of TiC/Al interface induces the precipitation of θ' phase around TiC nanoparticles, which increases the number density of θ' and improves the age-hardening effect. This finding is supposed to be also applicable to alloy systems of Al–Cu–Mg,Al–Cu–Mg–Li, Al–Cu–Mg–Ag, etc.
