用挤压铸造方法制备了Mullite/Al Cu Si复合材料。用硬度 (HB)测试仪、差示扫描量热仪 (DSC)和显微镜研究含Si量变化和Mullite纤维对Al Cu Si合金时效硬化行为的影响 ;元素Si、Mullite纤维以及二者同时存在对Al Cu Si合金时效析出序列...用挤压铸造方法制备了Mullite/Al Cu Si复合材料。用硬度 (HB)测试仪、差示扫描量热仪 (DSC)和显微镜研究含Si量变化和Mullite纤维对Al Cu Si合金时效硬化行为的影响 ;元素Si、Mullite纤维以及二者同时存在对Al Cu Si合金时效析出序列的影响。结果表明 :Si和Mullite纤维明显抑制了Al Cu合金GP区的形成 ;随着含Si量增加 ,Al Cu Si合金的时效硬化过程加快 ;Mullite纤维对Al Cu和Al Cu Si合金的时效硬化过程都具有加速作用 ,同时提高了基体合金的时效硬度 ,但相对而言 ,Mullite纤维对无Si的Al Cu合金的时效硬化加速作用更为明显一些。展开更多
The effect of Cu content on the high temperature oxidation properties of the phase change material(PCM)Al-Cu-Si alloys was studied.The oxidation kinetics curves at 600◦C were achieved for Al-Cu-Si alloys with 35-55%Cu...The effect of Cu content on the high temperature oxidation properties of the phase change material(PCM)Al-Cu-Si alloys was studied.The oxidation kinetics curves at 600◦C were achieved for Al-Cu-Si alloys with 35-55%Cu,which all follow the cubic law.With an increase in the Cu content from 35 to 55%,the weight gain decreases from 5.75 to 3×10^(−4) g/cm^(2) after 96 h isothermal oxidation.The oxidation rate also decreases with Cu content,the maximum and minimum rates are 1.52 and 0.32×10^(−5) g/cm^(2)•h,a nearly 4 times difference.Oxidation does not change the phase composition of Al-Cu-Si alloys,but coarsens the microstructure.The latent heat and the starting temperature of phase change after 96 h oxidation at 600◦C have variations of less than 10%and 6◦C,respectively,indicating that the Al-Cu-Si alloys have good thermal stability after high temperature oxidation.展开更多
文摘用挤压铸造方法制备了Mullite/Al Cu Si复合材料。用硬度 (HB)测试仪、差示扫描量热仪 (DSC)和显微镜研究含Si量变化和Mullite纤维对Al Cu Si合金时效硬化行为的影响 ;元素Si、Mullite纤维以及二者同时存在对Al Cu Si合金时效析出序列的影响。结果表明 :Si和Mullite纤维明显抑制了Al Cu合金GP区的形成 ;随着含Si量增加 ,Al Cu Si合金的时效硬化过程加快 ;Mullite纤维对Al Cu和Al Cu Si合金的时效硬化过程都具有加速作用 ,同时提高了基体合金的时效硬度 ,但相对而言 ,Mullite纤维对无Si的Al Cu合金的时效硬化加速作用更为明显一些。
基金The work is supported by the Chengdu Science and Technology Project(No:2019-YF05-01332-SN)the National Natural Science Foundation of China(No:51678488).
文摘The effect of Cu content on the high temperature oxidation properties of the phase change material(PCM)Al-Cu-Si alloys was studied.The oxidation kinetics curves at 600◦C were achieved for Al-Cu-Si alloys with 35-55%Cu,which all follow the cubic law.With an increase in the Cu content from 35 to 55%,the weight gain decreases from 5.75 to 3×10^(−4) g/cm^(2) after 96 h isothermal oxidation.The oxidation rate also decreases with Cu content,the maximum and minimum rates are 1.52 and 0.32×10^(−5) g/cm^(2)•h,a nearly 4 times difference.Oxidation does not change the phase composition of Al-Cu-Si alloys,but coarsens the microstructure.The latent heat and the starting temperature of phase change after 96 h oxidation at 600◦C have variations of less than 10%and 6◦C,respectively,indicating that the Al-Cu-Si alloys have good thermal stability after high temperature oxidation.
