Microstructure formed in the Fe-Ni-Co-Al-Cu-Ti permanent magnetic alloy with different treatments was studied by means of TEM observation, XRD method and SAXS technology. The results indicated that spinodal decomposi...Microstructure formed in the Fe-Ni-Co-Al-Cu-Ti permanent magnetic alloy with different treatments was studied by means of TEM observation, XRD method and SAXS technology. The results indicated that spinodal decomposition and orderiing transformation coexisted in the alloy and spinodal decomposition was completed in a short time. The ratio of component of spinodal and ordered microstructure was dependent on the cooling rate. The variation of gyration radius RG of the rod-like precipitates could be accounted for by the different growth modes of the precipitates related to strain energy and interface energy.展开更多
The microstructure evolution of Al-Cu-Li-Mn-Zr-Ti alloy during homogenization was investigated by optical microscopy （OM）, scanning electron microscopy （SEM）, energy dispersive X-ray spectrometry （EDX）, and diff...The microstructure evolution of Al-Cu-Li-Mn-Zr-Ti alloy during homogenization was investigated by optical microscopy （OM）, scanning electron microscopy （SEM）, energy dispersive X-ray spectrometry （EDX）, and differential scanning calorimeter （DSC） methods. The results show that severe dendritic segregation exists in the experimental alloy ingot. Numerous eutectic phases can be observed in the grain boundary, and the distribution of the main elements along the interdendritic region varies periodically. The main secondary phase is Al2Cu. The overburnt temperature of the alloy is 520 °C. The second phases are gradually dissolved into the matrix, and the grain boundaries become spare and thin during homogenization with increasing temperature or prolonging holding time. Homogenization can be described by a constitutive equation in exponential function. The suitable homogenization treatment for the alloy is （510 °C, 18 h）, which agrees well with the results of homogenization kinetic analysis.展开更多
文摘Microstructure formed in the Fe-Ni-Co-Al-Cu-Ti permanent magnetic alloy with different treatments was studied by means of TEM observation, XRD method and SAXS technology. The results indicated that spinodal decomposition and orderiing transformation coexisted in the alloy and spinodal decomposition was completed in a short time. The ratio of component of spinodal and ordered microstructure was dependent on the cooling rate. The variation of gyration radius RG of the rod-like precipitates could be accounted for by the different growth modes of the precipitates related to strain energy and interface energy.
文摘The microstructure evolution of Al-Cu-Li-Mn-Zr-Ti alloy during homogenization was investigated by optical microscopy （OM）, scanning electron microscopy （SEM）, energy dispersive X-ray spectrometry （EDX）, and differential scanning calorimeter （DSC） methods. The results show that severe dendritic segregation exists in the experimental alloy ingot. Numerous eutectic phases can be observed in the grain boundary, and the distribution of the main elements along the interdendritic region varies periodically. The main secondary phase is Al2Cu. The overburnt temperature of the alloy is 520 °C. The second phases are gradually dissolved into the matrix, and the grain boundaries become spare and thin during homogenization with increasing temperature or prolonging holding time. Homogenization can be described by a constitutive equation in exponential function. The suitable homogenization treatment for the alloy is （510 °C, 18 h）, which agrees well with the results of homogenization kinetic analysis.
