Propane Dehydrogenation over a Commercial Pt-Sn/Al2O3 Catalyst for Isobutane Dehydrogenation： Optimization of Reaction Conditions

The applicability of a commercial Pt-Sn/Al2O3 isobutane dehydrogenation catalyst in dehydrogenation of propane was studied. Catalyst performance tests were carded out in a fixed-bed quartz reactor under different operating conditions. Generally, as the factors improving propane conversion decrease the propylene selectivity, the optimal operating condition to maximize propylene yield is expected. The optimal condition was obtamed by the experimental design method. The investigated parameters were temperature, hydrogen/hydrocarbon （HE/HC） ratio and space velocity, being changed in three levels. Constrains such as the susceptibility of the catalyst components to sintering or phase transformation were also taken into account. Activity, selectivity and stability of the catalyst were considered as the measured response factors, while the space-time-yield （STY） was considered as the variable to be optimized due to its commercial interest. A STY of 16 mol.kg^-1.h^-1 was achieved under the optimal conditions of T= 620 ℃, H2/HC = 0.6 and, weight hourly space velocity （WHSV） = 2.2 h^-1. Single carbon-carbon bond rupture was found to be the main route for the formation of lower hydrocarbon byproducts.

Visible light-enhanced photothermal CO2 hydrogenation over Pt/Al2O3 catalyst

Light illumination has been widely used to promote activity and selectivity of traditional thermal catalysts. Nevertheless, the role of light irradiation during catalytic reactions is not well understood. In this work, Pt/Al2 O3 prepared by wet impregnation was used for photothermal CO2 hydrogenation, and it showed a photothermal effect. Hence, operando diffuse reflectance infrared Fourier-transform spectroscopy and density functional theory calculations were conducted on Pt/Al2 O3 to gain insights into the reaction mechanism. The results indicated that CO desorption from Pt sites including step sites(Ptstep) or/and terrace site(Ptterrace) is an important step during CO2 hydrogenation to free the active Pt sites. Notably, visible light illumination and temperature affected the CO desorption in different ways. The calculated adsorption energy of CO on Ptstep and Ptterrace sites was-1.24 and-1.43 e V, respectively. Hence, CO is more strongly bound to the Ptstep sites. During heating in the dark, CO preferentially desorbs from the Ptterrace site. However, the additional light irradiation facilitates transfer of CO from the Ptstep to Ptterrace sites and its subsequent desorption from the Ptterrace sites, thus promoting the CO2 hydrogenation.

Selective catalytic hydrogenation of naphthalene to tetralin over a NiMo/Al2O3 catalyst

The selective catalytic hydrogenation of naphthalene to high-value tetralin was systematically investigated.A series of Al2O3 catalysts containing different active metals(Co,Mo,Ni,W)were prepared by incipient wetness impregnation.The effects of different active metals forms(oxidation,reduction,sulfuration)and reaction conditions on naphthalene hydrogenation were investigated and the catalysts were characterized by XRD,XPS,BET,NH3-TPD and SEM.Especially,Ni-Mo/Al2O3 was first used in this reactive system.The results show that the oxidative4%Ni O-20%MoO3/Al2O3 is the best catalyst for the preparation of tetralin.The conversion of naphthalene and the selectivity of tetralin can reach 95.62%and 99.75%respectively at 200℃,8 h and 6 MPa.Compared with reduced and sulfureted 4%Ni O-20%MoO3/Al2O3 catalysts,oxidative 4%Ni O-20%MoO3/Al2O3 has a well dispersed and uniform monolayer of the active metals,larger pore volume and size,and larger total acidity.NiO-MoO3/Al2O3 has a synergistic effect between NiO activity and MoO3 selectivity.

Preparation of Al2O3 nanowires on 7YSZ thermal barrier coatings against CMAS corrosion

The commonly-employed material for thermal barrier coatings(TBCs)is 7 wt.%Y2O3 ZrO2(7YSZ),generally deposited by electron beam-physical vapor deposition(EB-PVD).Due to the increasing demand for higher operating temperature in aero-derivative gas turbines,a lot of effort has been made to prevent the premature failure of columnar 7YSZ TBCs,which is induced by the microstructure degradation,sintering and spallation after the deposition of infiltrated siliceous mineral(consisting of calcium magnesium aluminum silicate(CaO MgO Al2O3 SiO2,i.e.,CMAS)).A new method called Al-modification for columnar 7YSZ TBCs against CMAS corrosion was present.The Al film was magnetron-sputtered on the surface of the columnar 7YSZ TBCs,followed by performing vacuum heat treatment of the Al-deposited TBCs.During the heat treatment,the molten Al reacted with ZrO2 to formα-Al2O3 overlay that effectively hindered CMAS infiltration.Moreover,the Al film could evaporate and re-nucleate,leading to the generation of Al2O3 nanowires,which further restrained the moving of molten CMAS.

Effect of Alumina Particle Size on Ni/Al2O3 Catalysts for p-Nitrophenol Hydrogenation

The catalytic hydrogenation of p-nitrophenol to p-aminophenol was investigated over Ni/Al2O3 catalyst on alumina support with different particle size. It is found that support particle size has significant influences on physiochemical properties and catalytic activity of the resulting Ni/Al2O3 catalyst, but little influence on the selec-tivity. At a comparable amount of Ni loading, the catalytic activity of Ni/Al2O3 prepared with alumina support of smaller particle size is lower. The reduction behavior of the catalyst is a key factor in determining the catalytic activity of Ni/Al2O3 catalyst. The supported nickel catalyst 10.3Ni/Al2O3-3 improves the life span of the membrane by reducing fouling on the membrane surface compared to nano-sized nickel.

Microstructure and compression properties of fine Al2O3 particles dispersion strengthened molybdenum alloy

The Mo alloys reinforced by Al2O3 particles were fabricated by hydrothermal synthesis and powder metallurgy. The microstructures of Mo-Al2O3 alloys were studied by using XRD, SEM and TEM. The results show that Al2O3 particles, existing as a stable hexagonal phase(α-Al2O3), are uniformly dispersed in Mo matrix. The ultrafine α-Al2O3 particles remarkably refine grain size and increase dislocation density of Mo alloys. Moreover, a good interfacial bonding zone between α-Al2O3 and Mo grain is obtained. The crystallographic orientations of the interface of the Al2O3 particles and Mo matrix are [111]a-Al2O3//[111]Mo and(112)a-Al2O3//(0 11)Mo. Due to the effect of secondary phase and dislocation strengthening, the yield strength of Mo-2.0 vol.%Al2O3 alloy annealed at 1200 ℃ is approximately 56.0% higher than that of pure Mo. The results confirm that the addition of Al2O3 particles is a promising method to improve the mechanical properties of Mo alloys.

Effects of MgO/Al2O3 ratio on viscous behaviors and structures of MgO-Al2O3-TiO2-CaO-SiO2 slag systems with high TiO2 content and low CaO/SiO2 ratio

The effects of MgO/Al2 O3 ratio on the viscous behaviors of MgO-Al2 O3-TiO2-CaO-SiO2 systems were investigated by the rotating cylinder method.Raman spectroscopy was used to analyze the structural characteristics of slag and Factsage 7.0 was adopted to demonstrate the liquidus temperature of slag.The results show that the viscosity and activation energy for viscous flow decrease when the MgO/Al2O3 ratio increases from 0.82 to 1.36.The break point temperature and liquidus temperature of slag initially decrease and subsequently increase.The complex viscous structures are gradually depolymerized to simple structural units.In conclusion,with the increase of MgO/Al2O3 ratio,the degree of polymerization of slag decreases,which improves the fluidity of slag.The variations of liquidus temperature of slag lead to the same changes of break point temperature.

Sub-nanometer-thick Al2O3 Overcoat Remarkably Enhancing Thermal Stability of Supported Gold Catalysts

Supported gold nanoparticle catalysts show extraordinarily high activity in many reactions. While the relative poor thermal stability of Au nanoparticles against sintering at elevated temperatures severely limits their practical applications. Here atomic layer deposition （ALD） of TiO2 and Al2O3 was performed to deposit an Au/TiO2 catalyst with precise thickness con-trol, and the thermal stability was investigated. We surprisingly found that sub-nanometer-thick Al2O3 overcoat can su ciently inhibit the aggregation of Au particles up to 600 C in oxygen. On the other hand, the enhancement of Au nanoparticle stability by TiO2 overcoat is very limited. Di use reffectance infrared Fourier transform spectroscopy （DRIFTS） of CO chemisorption and X-ray photoelectron spectroscopy measurements both con rmed the ALD overcoat on Au particles surface and suggested that the presence of TiO2 and Al2O3 ALD overcoat on Au nanoparticles does not considerably change the electronic properties of Au nanoparticles. The catalytic activities of the Al2O3 overcoated Au/TiO2 catalysts in CO oxidation increased as increasing calcination temperature, which suggests that the embed-ded Au nanoparticles become more accessible for catalytic function after high temperature treatment, consistent with our DRIFTS CO chemisorption results.

Dynamic recrystallization behavior and mechanical properties of bimodal scale Al2O3 reinforced AZ31 composites by soild state synthesis

In this paper,(500 nm 1%+5μm 3%)bimodal scale Al2O3p/AZ31 composites was fabricated by solid state synthesis and the effect of bimodal scale Al2O3 particulates on its dynamic recrystallization behavior and mechanical properties was investigated.The optical microscopy,scanning electron microscopy,transmission electron microscopy and electron universal strength tester composites were used to characterize the composites.The results indicate that the grains size of the composites are significantly refined and the mechanical properties are obviously improved.Due to the presence of the bimodal scale Al2o3 particulates,the high-density dislocation zone is formed around nano-Al2o3p and the particle deformation zone is formed near micron-ABOap.These zones are ideal sites for the formation of recrystallization nucleus.Meanwhile,the addition of the bimodal scale Al2o3 particulates may delay or hinder the growth of matrix grain through the pining effect on the grain boundaries,resulting in significantly improving the yield strength and tensile strength of Al2O3p/AZ31 composites.

ICP-AES法同时测定硅藻土中Al2O3 Fe2O3 CaO和MgO

天然硅藻土的化学成份主要是SiO2,其次是Al2O3、Fe2O3、和MgO等物质。硅藻土中的SiO2基本上是非晶质SiO2,含量一般在80%左右。Al2O3含量一般为百分之几至十几。Fe2O3含量一般为百分之几。CaO和MgO的含量一般小于千分之几。Al2O3、Pe2O3、CaO和MgO之间含量差别很大,同时测定含量差别很大的几种物质,目前报道很少。本文提出采用ICP-AES法同时测定硅藻土中Al2O5、Fe2O3、CaO和MgO含量的分析方法,并获得了满意结果。

Facile Preparation of Al2O3 Hollow Microspheres Via a Urea-mediated Precipitation Process

Al2 O3 hollow microspheres without noticeable aggregation have been prepared via a facile templating route with urea-mediated precipitation. The precipitation process is different from the surfaceadsorption method which is confined to the adsorption capacity of the template surface. TEM and SEM images indicate that most of these Al2 O3 hollow microspheres with shell thickness of tens of nanometers and diameters in a narrow range of 100-200 nm consist of a shell of closely packed nanoparticles. The optimal amount of H2 O and EtOH are 40 and 120 m L, respectively. The specific surface area, average pore size and pore volume of the Al2 O3 hollow microspheres（calcinated at 600 ℃） are 328.52 m2/g, 17.496 nm and 1.985 cm3/g, respectively. As the calcination temperature increases from 600 to 1 100 ℃, the phase composition changes from γ-Al2 O3 to θ-Al2 O3 and a-Al2 O3, and the surface morphology appears to change from a relatively rough surface formed by nanoparticles to a smooth surface formed by lamellar, which lead to the closure of pore channels and the reduction of specific surface.

Oxidative Desulfurization of DBT with H2O2 over 3DOM H3PW12O40/Al2O3 Catalyst

A series of heteropoly acid (HPA) based Al2O3 catalysts with three-dimensional ordered (3DOM) structure were synthesized by colloidal crystal template method.Interconnected macropores (250 nm) could be clearly observed by scanning electron microscope (SEM) and transmission electron microscope (TEM).Mesopores could be detected by N2 adsorption-desorption isotherms which further confirmed the 3DOM structural characteristics of catalyst.Moreover,Keggin-type HPW was highly dispersed in the Al2O3 framework,which suggested by powder X-ray diffraction (XRD) and Fourier transform infrared spectra (FT-IR) results.The oxidation desulfurization (ODS) performance of 3DOM H3PW12O40/Al2O3 of refractory sulphur compounds was evaluated in the presence of hydrogen peroxide.It oxidized 98.5% of dibenzothiophene (DBT) into corresponding sulfone within 3 h,which exhibited superior ODS performance than corresponding mesoporous and microporous H3PW12O40/Al2O3 catalyst.The enhancement of ODS efficiency is related to the improvement of mass transfer of DBT in the pore channel resulting from the interconnected 3DOM structure.Furthermore,the as-prepared catalyst still demonstrates outstanding cycle performance after 6 runs,which could be easily recovered from the model fuel.

Comparison between AlN and Al2O3 ceramics applied to barrier dielectric of plasma actuator

This paper reports the material characterization and performance evaluation of an AlN ceramic based dielectric barrier discharge（DBD） plasma actuator. A conventional Al2O3 ceramic is also investigated as a control. The plasma images,thermal characteristics and electrical properties of the two actuators are compared and studied. Then, with the same electrical operating parameters（12-kV applied voltage and 11-kHz power frequency）, variations of the surface morphologies,consumed power and induced velocities are recorded and analyzed. The experimental results show that the AlN actuator can produce a more uniform discharge while the discharge of the Al2O3 actuator is easier to become filamentary. The later condition leads to higher power consumption and earlier failure due to electrode oxidation. In the plasma process,the power increment of the AlN actuator is higher than that of the Al_2O_3 actuator. The induced velocity is also influenced by this process. Prior to aging, the maximum induced velocity of the AlN actuator is 4.2 m/s, which is about 40% higher than that of the Al2O3 actuator. After 120-min plasma aging, the maximum velocity of the aged AlN actuator decreases by 27.8% while the Al_2O_3 actuator registers a decrease of 25%.

The microwave response of MgB2 /Al2O3 superconducting thin films

Microwave characteristics of MgB2/Al2O3 superconducting thin films were investigated by coplanar resonator technique. The thin films studied have different grain sizes resulting from different growth techniques. The experimental results can be described very well by a grain-size model which combines coplanar resonator theory and Josephson junction network model. It was found that the penetration depth and surface resistance of thin films with smaller grain sizes are larger than those of thin films with larger grain sizes.

Positive Bias Temperature Instability Degradation of Buried InGaAs Channel nMOSFETs with InGaP Barrier Layer and Al2O3 Dielectric

Positive bias temperature instability stress induced interface trap density in a buried InGaAs channel metaloxide-semiconductor field-effect transistor with a InCaP barrier layer and Al2O3 dielectric is investigated. Well behaved split C-V characteristics with small capacitance frequency dispersion are confirmed after the insertion of the InCaP barrier layer. The direct-current Id-Vg measurements show both degradations of positive gate voltage shift and sub-threshold swing in the sub-threshold region, and degradation of positive △Vg in the oncurrent region. The Id-Vg degradation during the positive bias temperature instability tests is mainly contributed by the generation of near interface acceptor traps under stress. Specifically, the stress induced aeceptor traps contain both permanent and recoverable traps. Compared with surface channel InCaAs devices, stress induced recoverable donor traps are negligible in the buried channel ones.

Research of Trap and Electron Density Distributions in the Interface of Polyimide/Al2O3 Nanocomposite Films Based on IDC and SAXS

The distributions of traps and electron density in the interfaces between polyimide （PI） matrix and Al2O3 nanoparticles are researched using the isothermal decay current and the small-angle x-ray scattering （SAXS） tests. According to the electron density distribution for quasi two-phase mixture doped by spherical nanoparticles, the electron densities in the interfaces of PI/Al2O3 nanocomposite films are evaluated. The trap level density and carrier mobility in the interface are studied. The experimental results show that the distribution and the change rate of the electron density in the three layers of interface are different, indicating different trap distributions in the interface layers. There is a maximum trap level density in the second layer, where the maximum trap level density for the nanocomposite film doped by 25 wt% is 1.054 × 10^22 eV·m^-3 at 1.324eV, resulting in the carrier mobility reducing. In addition, both the thickness and the electron density of the nanocomposite film interface increase with the addition of the doped Al2O3 contents. Through the study on the trap level distribution in the interface, it is possible to further analyze the insulation mechanism and to improve the performance of nano-dielectric materials.

Preliminary Study on Combining K2O-Al2O3-SiO2 System Dental Glass Ceramic with Al2O3 Ceramic

Relationship between K2O-Al2O3-SiO2 system dental glass ceramics and Al2O3 ceramics was investigated. 4 groups of glass ceramic with the same components but different thickness（0.8, 1.2, 1.6, and 2.0 mm） were sintered on Al2O3 base ceramics according to the same thermal treatment system of leucite micro-crystallization reported in previous literatures. The products of each group were analyzed by polarizing microscope, X-ray diffractometer, and an INSTRON material testing machine. Under the thermal treatment system, leucite crystals were formed in samples of each group, and dispersed evenly. Meanwhile, the compressive strengths of group 3 and group 4 were higher than those of group 1 and group 2. Samples of group 3 showed better mechanical properties than others. The conclusions are drawn that Leucite crystals can be controlled in K2O-Al2O3-SiO2 system glass ceramic-Al2O3 ceramic composite material, and the thickness of glass ceramic has a notable influence on the compressive strength of this ceramic composite material.

Synthesis of 1,2:4,5-di-O-Isopropylidene-3-C-Cyano-β-D-ribo-hex-2-ulo Pyranose by Phase Transition Catalysis

Introduction The cyano branched carbohydrates are useful, versatil intermediaries for the synthesis of branched sugars having biological activity in nature. Owing to the good yield, mild reaction conditions and high stereospecificity, the phase transition catalysis(PTC)method has been widely used to the syntheses of C-

Local structural evolutions of CuO/ZnO/Al2O3 catalyst for methanol synthesis under operando conditions studied by in situ quick X-ray absorption spectroscopy

In situ quick X-ray absorption spectroscopy(QXAFS) at the Cu and Zn K-edge under operando conditions has been used to unravel the Cu/Zn interaction and identify possible active site of CuO/ZnO/Al_2O_3 catalyst for methanol synthesis. In this work, the catalyst, whose activity increases with the reaction temperature and pressure, was studied at calcined, reduced, and reacted conditions. TEM and EDX images for the calcined and reduced catalysts showed that copper was distributed uniformly at both conditions. TPR profile revealed two reduction peaks at 165 and 195 °C for copper species in the calcined catalyst. QXAFS results demonstrated that the calcined form consisted mainly of a mixed Cu O and Zn O, and it was progressively transformed into Cu metal particles and dispersed Zn O species as the reduction treatment. It was demonstrated that activation of the catalyst precursor occurred via a Cu^+intermediate, and the active catalyst predominantly consisted of metallic Cu and Zn O evenunder higher pressures. Structure of the active catalyst did not change with the temperature or pressure, indicating that the role of the Zn was mainly to improve Cu dispersion.This indicates the potential of QXAFS method in studying the structure evolutions of catalysts in methanol synthesis.

The effect of Al3+ coordination structure on the propane dehydrogenation activity of Pt/Ga/Al2O3 catalysts

The effect of the Al2O3 structure on the performance of Pt/Ga/Al2O3 catalysts is investigated for the direct dehydrogenation of propane. The study unveils that the structure of Al3+determines the bulk structure of catalysts, particularly a high content of coordinatively unsaturated Al3+sites(penta-coordinated Al3+,denoted as Al3+penta) could lead to a remarkably improved dehydrogenation activity of the catalyst. The bulk characterization reveals that the sufficient amount of Al3+pentain Al2O3 benefit the dispersion of Pt and Ga2O3 on the Al2O3 support. At the same time, TPR results reveal that the presence of Pt facilitates the reduction of Ga2O3, likely due to the hydrogen spillover between the well dispersed Pt and Ga2O3,which consequently enhances the synergistic function between Pt and Ga2O3 in the dehydrogenation of propane. Recyclability tests demonstrate that the dehydrogenation activity stabilizes after three cycles over the Pt/Ga/Al2O3 catalyst.