A solid superacid catalyst Pt-SO42-/ZrO2-A12O3 for n-pentane isomerization, was prepared by incipient-wetness impregnation. Preparetion conditions, namely, calcination temperature, concentration of sulfuric acid solut...A solid superacid catalyst Pt-SO42-/ZrO2-A12O3 for n-pentane isomerization, was prepared by incipient-wetness impregnation. Preparetion conditions, namely, calcination temperature, concentration of sulfuric acid solution used in impregnation and Al2O3 concentration, were varied to investigate the effects on catalytic performance of Pt-SO42-/ZrO2-A12O3. The results showed that the PtSZA catalyst exhibited excellent catalytic performance for n-pentane isomerization. Under optimized preparation conditions of calcination temperature of 650°C, reaction time for 3 h, concentration of sulfuric acid solution for 0.5 mol/L, 30% of Al2O3 concentration and 0.3% of Pt concentration, the n-pentane conversion and isopentane selectivity of Pt-SO42-/ZrO2-A12O3 could reach up to 62.17% and 91.60%, respectively.展开更多
TiO_2 modified Al_2O_3 binary oxide was prepared by a wet-impregnation method and used as the support for ruthenium catalyst. The catalytic performance of Ru/TiO_2–Al_2O_3catalyst in CO_2 methanation reaction was inv...TiO_2 modified Al_2O_3 binary oxide was prepared by a wet-impregnation method and used as the support for ruthenium catalyst. The catalytic performance of Ru/TiO_2–Al_2O_3catalyst in CO_2 methanation reaction was investigated. Compared with Ru/Al_2O_3 catalyst, the Ru/TiO_2–Al_2O_3catalytic system exhibited a much higher activity in CO_2 methanation reaction. The reaction rate over Ru/TiO_2–Al_2O_3 was 0.59 mol CO_2·(g Ru)1·h-1, 3.1 times higher than that on Ru/Al_2O_3[0.19 mol CO_2·(gRu)-1·h-1]. The effect of TiO_2 content and TiO_2–Al_2O_3calcination temperature on catalytic performance was addressed. The corresponding structures of each catalyst were characterized by means of H_2-TPR, XRD, and TEM. Results indicated that the averaged particle size of the Ru on TiO_2–Al_2O_3support is 2.8 nm, smaller than that on Al_2O_3 support of 4.3 nm. Therefore, we conclude that the improved activity over Ru/TiO_2–Al_2O_3catalyst is originated from the smaller particle size of ruthenium resulting from a strong interaction between Ru and the rutile-TiO_2 support, which hindered the aggregation of Ru nanoparticles.展开更多
Several Pt-θ-Al_2O_3 catalysts with similar ultra-low Cl contents were used to investigate the influence of dechlorination temperature on propane dehydrogenation reaction. The Pt-θ-Al_2O_3 catalyst treated at a high...Several Pt-θ-Al_2O_3 catalysts with similar ultra-low Cl contents were used to investigate the influence of dechlorination temperature on propane dehydrogenation reaction. The Pt-θ-Al_2O_3 catalyst treated at a highest dechlorination temperature showed a lowest propane rate and propylene selectivity. The scanning transmission electron microscopy showed that the dispersions of Pt nanoparticles decreased with an increasing dechlorination temperature. The temperature-programmed reduction analysis showed that higher dechlorination temperature could lead to strong interactions between the metal and support, making it difficult to reduce Pt nanoparticles. The temperature-programmed oxidation analysis implied that more coke was deposited on the metal for catalyst treated at higher dechlorination temperature. The Raman spectra and the H/C ratio showed that more side-reactions, such as cracking and severe deep dehydrogenation reactions, occurred on catalysts treated at higher dechlorination temperatures. Therefore, the lower the dispersion of Pt nanoparticles was, the stronger the metal-support interactions and increased side-reactions would be, resulting in lower catalytic activity for Pt-θ-Al_2O_3 treated with higher dechlorination temperature.展开更多
An aqueous sol-gel method for the synthesis of γ-Al2O3 supports has been developed for the use in tar reforming applications. It was determined the influences of two different aluminum precursors (aluminum sec-butoxi...An aqueous sol-gel method for the synthesis of γ-Al2O3 supports has been developed for the use in tar reforming applications. It was determined the influences of two different aluminum precursors (aluminum sec-butoxide (Al[OCH(CH3)CH2CH3]3) and aluminum nitrate (Al(NO3)3)) on the textural and crystallographic properties of Al2O3 supports. Only the formation of γ-Al2O3 is aimed in order to use these alumina materials as catalytic supports, because it presents high specific surface area and pore volume values. Additionally, the synthesis of γ-Al2O3 was realized with the use of a functionalized silicon precursor, [3-(2-aminoethylamino)propyl]trimethoxysilane, called EDAS. By the presence of an ethylenediamine group in this molecule, it is possible to chelate metallic ions and to highly increase their dispersion at a molecular level during the synthesis of metallic catalysts supported on alumina, which is an asset for catalytic applications. So it was developed a synthesis sol-gel procedure for the cogelation between the functionalized silicon alkoxide EDAS and alumina precursor. The alumina supports synthesized with Al(NO3)3 as precursor presented higher porous values than the ones obtained with aluminium sec-butoxide precursor. Since nitrate salts are much easier to handle than alkoxides, these observations allowed validating Al(NO3)3 as aluminum source for the future synthesis procedures for metallic catalysts supported on alumina.展开更多
文摘A solid superacid catalyst Pt-SO42-/ZrO2-A12O3 for n-pentane isomerization, was prepared by incipient-wetness impregnation. Preparetion conditions, namely, calcination temperature, concentration of sulfuric acid solution used in impregnation and Al2O3 concentration, were varied to investigate the effects on catalytic performance of Pt-SO42-/ZrO2-A12O3. The results showed that the PtSZA catalyst exhibited excellent catalytic performance for n-pentane isomerization. Under optimized preparation conditions of calcination temperature of 650°C, reaction time for 3 h, concentration of sulfuric acid solution for 0.5 mol/L, 30% of Al2O3 concentration and 0.3% of Pt concentration, the n-pentane conversion and isopentane selectivity of Pt-SO42-/ZrO2-A12O3 could reach up to 62.17% and 91.60%, respectively.
基金Supported by the National Natural Science Foundation of China(211031735127108721476226 and 51471076)DICP Fundamental Research Program for Clean Energy(DICPM201307)
文摘TiO_2 modified Al_2O_3 binary oxide was prepared by a wet-impregnation method and used as the support for ruthenium catalyst. The catalytic performance of Ru/TiO_2–Al_2O_3catalyst in CO_2 methanation reaction was investigated. Compared with Ru/Al_2O_3 catalyst, the Ru/TiO_2–Al_2O_3catalytic system exhibited a much higher activity in CO_2 methanation reaction. The reaction rate over Ru/TiO_2–Al_2O_3 was 0.59 mol CO_2·(g Ru)1·h-1, 3.1 times higher than that on Ru/Al_2O_3[0.19 mol CO_2·(gRu)-1·h-1]. The effect of TiO_2 content and TiO_2–Al_2O_3calcination temperature on catalytic performance was addressed. The corresponding structures of each catalyst were characterized by means of H_2-TPR, XRD, and TEM. Results indicated that the averaged particle size of the Ru on TiO_2–Al_2O_3support is 2.8 nm, smaller than that on Al_2O_3 support of 4.3 nm. Therefore, we conclude that the improved activity over Ru/TiO_2–Al_2O_3catalyst is originated from the smaller particle size of ruthenium resulting from a strong interaction between Ru and the rutile-TiO_2 support, which hindered the aggregation of Ru nanoparticles.
基金financially supported by grants from the State Key Laboratory of Catalytic Materials and Reaction Engineering (RIPP, SINOPEC)the National Natural Science Foundation of China (Grant No. 21706036)+2 种基金the Natural Science Foundation of Fujian Province (Grant No. 2018J05019)the Fujian Educational Bureau (Grant No. JAT170073)the Talent Foundation of Fuzhou University (Grant No. XRC-1650)
文摘Several Pt-θ-Al_2O_3 catalysts with similar ultra-low Cl contents were used to investigate the influence of dechlorination temperature on propane dehydrogenation reaction. The Pt-θ-Al_2O_3 catalyst treated at a highest dechlorination temperature showed a lowest propane rate and propylene selectivity. The scanning transmission electron microscopy showed that the dispersions of Pt nanoparticles decreased with an increasing dechlorination temperature. The temperature-programmed reduction analysis showed that higher dechlorination temperature could lead to strong interactions between the metal and support, making it difficult to reduce Pt nanoparticles. The temperature-programmed oxidation analysis implied that more coke was deposited on the metal for catalyst treated at higher dechlorination temperature. The Raman spectra and the H/C ratio showed that more side-reactions, such as cracking and severe deep dehydrogenation reactions, occurred on catalysts treated at higher dechlorination temperatures. Therefore, the lower the dispersion of Pt nanoparticles was, the stronger the metal-support interactions and increased side-reactions would be, resulting in lower catalytic activity for Pt-θ-Al_2O_3 treated with higher dechlorination temperature.
文摘An aqueous sol-gel method for the synthesis of γ-Al2O3 supports has been developed for the use in tar reforming applications. It was determined the influences of two different aluminum precursors (aluminum sec-butoxide (Al[OCH(CH3)CH2CH3]3) and aluminum nitrate (Al(NO3)3)) on the textural and crystallographic properties of Al2O3 supports. Only the formation of γ-Al2O3 is aimed in order to use these alumina materials as catalytic supports, because it presents high specific surface area and pore volume values. Additionally, the synthesis of γ-Al2O3 was realized with the use of a functionalized silicon precursor, [3-(2-aminoethylamino)propyl]trimethoxysilane, called EDAS. By the presence of an ethylenediamine group in this molecule, it is possible to chelate metallic ions and to highly increase their dispersion at a molecular level during the synthesis of metallic catalysts supported on alumina, which is an asset for catalytic applications. So it was developed a synthesis sol-gel procedure for the cogelation between the functionalized silicon alkoxide EDAS and alumina precursor. The alumina supports synthesized with Al(NO3)3 as precursor presented higher porous values than the ones obtained with aluminium sec-butoxide precursor. Since nitrate salts are much easier to handle than alkoxides, these observations allowed validating Al(NO3)3 as aluminum source for the future synthesis procedures for metallic catalysts supported on alumina.