The formation conditions of C, Al4C3 and Al2O3 in the Al Cl disproportionation process in vacuum to produce aluminum was investigated by thermodynamics analysis. It is demonstrated that the required temperatures for t...The formation conditions of C, Al4C3 and Al2O3 in the Al Cl disproportionation process in vacuum to produce aluminum was investigated by thermodynamics analysis. It is demonstrated that the required temperatures for the reactions to form these impurities, the disproportionation of CO and the reactions of metallic aluminum with CO, decrease with decreasing pressure. The lg pCO-1/T diagram of metallic aluminum-CO system agrees with the experimental results, indicating that the reaction rate is very high and this system in vacuum is approximately in equilibrium; therefore, the equilibrium diagram can be used to predict the possible reactions in this system in vacuum.展开更多
The oligomerzation reactions on different catalysts were investigated and discussed. 1-Octene, 1-decene, 1-do- decene, a mixture of olefins （with a mass ratio of w（l-octene）： w（1-decenc）：w（1-dodecene） equatin...The oligomerzation reactions on different catalysts were investigated and discussed. 1-Octene, 1-decene, 1-do- decene, a mixture of olefins （with a mass ratio of w（l-octene）： w（1-decenc）：w（1-dodecene） equating to 30：40：30）, and the products from paraffin cracking were oligomerized on the AlCl3/TiC14 catalyst. The results indicated that the AlCl3 catalyst led to severe coking reaction. With an increase in carbon number of alpha-olefins, the freezing point of oligomers increased and the kinematic viscosity decreased. The oligomers formed from the mixed olefins and the paraffin cracking products showed higher kinematic viscosity. Normal paraffins contained in the cracked products could increase the freezing point of oligomers. Furthermore, the distillation range of oligomers obtained from the cracked products was close to those of oligo- mers originated from 1-octene and 1-decene, while the oligomers obtained from the mixed olefins and 1-dodecene had simi- lar distillation ranges.展开更多
基金Project(51364020)supported by the National Natural Science Foundation of China
文摘The formation conditions of C, Al4C3 and Al2O3 in the Al Cl disproportionation process in vacuum to produce aluminum was investigated by thermodynamics analysis. It is demonstrated that the required temperatures for the reactions to form these impurities, the disproportionation of CO and the reactions of metallic aluminum with CO, decrease with decreasing pressure. The lg pCO-1/T diagram of metallic aluminum-CO system agrees with the experimental results, indicating that the reaction rate is very high and this system in vacuum is approximately in equilibrium; therefore, the equilibrium diagram can be used to predict the possible reactions in this system in vacuum.
基金the SINOPEC Corporation for the financial support
文摘The oligomerzation reactions on different catalysts were investigated and discussed. 1-Octene, 1-decene, 1-do- decene, a mixture of olefins （with a mass ratio of w（l-octene）： w（1-decenc）：w（1-dodecene） equating to 30：40：30）, and the products from paraffin cracking were oligomerized on the AlCl3/TiC14 catalyst. The results indicated that the AlCl3 catalyst led to severe coking reaction. With an increase in carbon number of alpha-olefins, the freezing point of oligomers increased and the kinematic viscosity decreased. The oligomers formed from the mixed olefins and the paraffin cracking products showed higher kinematic viscosity. Normal paraffins contained in the cracked products could increase the freezing point of oligomers. Furthermore, the distillation range of oligomers obtained from the cracked products was close to those of oligo- mers originated from 1-octene and 1-decene, while the oligomers obtained from the mixed olefins and 1-dodecene had simi- lar distillation ranges.
