The hardness values and the wear resistance of Al2O3P/ Zn-Al composite, prepared by means of rheological casting technology,are investigated separately in this work. The results show that the addition of Al2O3P increa...The hardness values and the wear resistance of Al2O3P/ Zn-Al composite, prepared by means of rheological casting technology,are investigated separately in this work. The results show that the addition of Al2O3P increases the hardness values of the matrix at both room and high temperature and improves the wear resistance of the material.The hardness values and the wear resistance of the composite rise with the increase of the particle volume fraction or the decrease of the particle size.The raising of test temperature results in a rapid descending of its hardness values.However, the addition of Al2O3P improves the property of high temperature resistance of Zn-Al alloys significantly.Moreover,the effect of quenching, tempering or cycling heat treatment on the hardness values of the composite is also studied.展开更多
Dynamic recrystallization(DRX)is of great significance for the thermomechanical processing and microstructural regulation of TiAl intermetallics.However,the underlying DRX mechanism remains poorly understood.In this s...Dynamic recrystallization(DRX)is of great significance for the thermomechanical processing and microstructural regulation of TiAl intermetallics.However,the underlying DRX mechanism remains poorly understood.In this study,an Avrami kinetics model for DRX was established,which was capable of predicting the DRX fraction accurately.In addition,the effect of Al_(2)O_(3)short fiber on the DRX mechanisms of TiAl matrix composite during the isothermal compression was investigated for the first time.The re-sults showed that other than inhibiting DRX by particles in the TiAl matrix composites,the addition of Al_(2)O_(3)short fiber accelerated a novel DRX process,which was induced by twinning and twin intersec-tions(TDRX).Thus,this composite exhibited a higher DRX rate than that of the as-cast TiAl monolithic alloy.The origin of the twin intersection and TDRX for the composite was revealed.The stress concentration near the Al_(2)O_(3)fiber was above the critical shear stress for twinning and thus was favorable for the formation of twinning and twin intersections.The high stored strain energy at the regions of twins and twin intersections provided the driving force for TDRX.TDRX accelerated the grain refinement in the TiAl matrix near the Al_(2)O_(3)fiber.The present findings would provide a new perspective on DRX mechanisms,and provide the scientific guidance for optimizing the microstructures of TiAl matrix composites.展开更多
B_(4)C/Al composites are widely utilized as neutron absorbing materials for the storage and transportation of spent nuclear fuel.In order to improve the high-temperature mechanical properties of B_(4)C/Al composites,i...B_(4)C/Al composites are widely utilized as neutron absorbing materials for the storage and transportation of spent nuclear fuel.In order to improve the high-temperature mechanical properties of B_(4)C/Al composites,in-situ nano-Al_(2)O_(3)was introduced utilizing oxide on Al powder surface.In this study,the Al_(2)O_(3)content was adjusted by utilizing spheroid Al powder with varying diameters,thereby investigating the impact of Al_(2)O_(3)content on the tensile properties of(B_(4)C+Al_(2)O_(3))/Al composites.It was found that the pinning effect of Al_(2)O_(3)on the grain boundaries could hinder the recovery of dislocations and lead to dislocation accumulation at high temperature.As the result,with the increase in Al_(2)O_(3)content and the decrease in grain size,the high-temperature strength of the composites increased significantly.The finest Al powder used in this investigation had a diameter of 1.4μm,whereas the resultant composite exhibited a maximum strength of 251 MPa at room temperature and 133 MPa at 350℃,surpassing that of traditional B_(4)C/Al composites.展开更多
The effect of the volume fraction of 3D-metal matrix composites(MMC)framework on the compressive properties of 3D interpenetrating hierarchical ZrO_(2)-toughened Al_(2)O_(3)particle(ZTAp)/40Cr steel composites was inv...The effect of the volume fraction of 3D-metal matrix composites(MMC)framework on the compressive properties of 3D interpenetrating hierarchical ZrO_(2)-toughened Al_(2)O_(3)particle(ZTAp)/40Cr steel composites was investigated.The results showed that the compressive properties of the material tended to decrease as the volume fraction of 3D-MMC framework increased.The composite with 35 vol.%3D-MMC had a yield strength of 1455.2 MPa and compressive strength of 1612.8 MPa,which occurred at a strain value of 5.6%.Compared to the homogeneously dispersed composite material,the composite with 35 vol.%3D-MMC had a 144.7%higher yield strength,which occurred at a 20%higher strain.An analysis of the cracks inside the material revealed that the crack was hindered and deflected by the matrix during propagation,which lengthened the crack propagation path and consumed more energy,thus leading to toughening.The results indicated that 3D interpenetrating hierarchical structure had a strengthening and toughening effect on ZTAp/40Cr composites.展开更多
Aluminum oxide(Al_(2)O_(3))ceramics have been widely utilized as circuit substrates owing to their exceptional performance.In this study,boron nitride microribbon(BNMR)/Al_(2)O_(3)composite ceramics are prepared using...Aluminum oxide(Al_(2)O_(3))ceramics have been widely utilized as circuit substrates owing to their exceptional performance.In this study,boron nitride microribbon(BNMR)/Al_(2)O_(3)composite ceramics are prepared using spark plasma sintering(SPS).This study examines the effect of varying the amount of toughened phase BNMR on the density,mechanical properties,dielectric constant,and thermal conductivity of BNMR/Al_(2)O_(3)composite ceramics while also exploring the mechanisms behind the toughening and increased thermal conductivity of the fabricated ceramics.The results showed that for a BNMR content of 5 wt%,BNMR/Al_(2)O_(3)composite ceramics displayed more enhanced characteristics than pure Al_(2)O_(3)ceramics.In particular,the relative density,hardness,fracture toughness,and bending strength were 99.95%±0.025%,34.11±1.5 GPa,5.42±0.21 MPa·m^(1/2),and 375±2.5 MPa,respectively.These values represent increases of 0.76%,70%,35%,and 25%,respectively,compared with the corresponding values for pure Al_(2)O_(3)ceramics.Furthermore,during the SPS process,BNMRs are subjected to high temperatures and pressures,resulting in the bending and deformation of the Al_(2)O_(3)matrix;this leads to the formation of special thermal pathways within it.The dielectric constant of the composite ceramics decreased by 25.6%,whereas the thermal conductivity increased by 45.6%compared with that of the pure Al_(2)O_(3)ceramics.The results of this study provide valuable insights into ways of enhancing the performance of Al_(2)O_(3)-based ceramic substrates by incorporating novel BNMRs as a second phase.These improvements are significant for potential applications in circuit substrates and related fields that require high-performance materials with improved mechanical properties and thermal conductivities.展开更多
文摘The hardness values and the wear resistance of Al2O3P/ Zn-Al composite, prepared by means of rheological casting technology,are investigated separately in this work. The results show that the addition of Al2O3P increases the hardness values of the matrix at both room and high temperature and improves the wear resistance of the material.The hardness values and the wear resistance of the composite rise with the increase of the particle volume fraction or the decrease of the particle size.The raising of test temperature results in a rapid descending of its hardness values.However, the addition of Al2O3P improves the property of high temperature resistance of Zn-Al alloys significantly.Moreover,the effect of quenching, tempering or cycling heat treatment on the hardness values of the composite is also studied.
基金the National Science and Technology Major Project(No.2019700160157)the Natural Science Foundation of Hunan Province(No.2021JJ40761)+3 种基金the Central South University Innovation-Driven Research Programmme(No.v2023CXQD030)the Independent Innovation Fund Project Aero Engine Corporation of China(No.CXPT-2021-001)the Postgraduate Scientific Research Innovation Project of Hunan Province(No.CX20230163)the Fundamental Research Funds for the Cen-tral Universities of Central South University(No.2023ZZTS0078)for providing financial support.
文摘Dynamic recrystallization(DRX)is of great significance for the thermomechanical processing and microstructural regulation of TiAl intermetallics.However,the underlying DRX mechanism remains poorly understood.In this study,an Avrami kinetics model for DRX was established,which was capable of predicting the DRX fraction accurately.In addition,the effect of Al_(2)O_(3)short fiber on the DRX mechanisms of TiAl matrix composite during the isothermal compression was investigated for the first time.The re-sults showed that other than inhibiting DRX by particles in the TiAl matrix composites,the addition of Al_(2)O_(3)short fiber accelerated a novel DRX process,which was induced by twinning and twin intersec-tions(TDRX).Thus,this composite exhibited a higher DRX rate than that of the as-cast TiAl monolithic alloy.The origin of the twin intersection and TDRX for the composite was revealed.The stress concentration near the Al_(2)O_(3)fiber was above the critical shear stress for twinning and thus was favorable for the formation of twinning and twin intersections.The high stored strain energy at the regions of twins and twin intersections provided the driving force for TDRX.TDRX accelerated the grain refinement in the TiAl matrix near the Al_(2)O_(3)fiber.The present findings would provide a new perspective on DRX mechanisms,and provide the scientific guidance for optimizing the microstructures of TiAl matrix composites.
基金supported by the National Key R&D Program of China(Grant No.2023YFB3710601)the National Natural Science Foundation of China(Grant Nos.52203385 and 52171056)+2 种基金the CNNC Science Fund for Talented Young Scholars,the Institute of Metal Research(IMR)Innovation Fund(Grant No.2021-ZD02)the Natural Science Foundation of Liaoning Province(Grant No.2022-BS-009)Young Elite Scientists Sponsorship Program by CAST(Grant No.YESS20220225).
文摘B_(4)C/Al composites are widely utilized as neutron absorbing materials for the storage and transportation of spent nuclear fuel.In order to improve the high-temperature mechanical properties of B_(4)C/Al composites,in-situ nano-Al_(2)O_(3)was introduced utilizing oxide on Al powder surface.In this study,the Al_(2)O_(3)content was adjusted by utilizing spheroid Al powder with varying diameters,thereby investigating the impact of Al_(2)O_(3)content on the tensile properties of(B_(4)C+Al_(2)O_(3))/Al composites.It was found that the pinning effect of Al_(2)O_(3)on the grain boundaries could hinder the recovery of dislocations and lead to dislocation accumulation at high temperature.As the result,with the increase in Al_(2)O_(3)content and the decrease in grain size,the high-temperature strength of the composites increased significantly.The finest Al powder used in this investigation had a diameter of 1.4μm,whereas the resultant composite exhibited a maximum strength of 251 MPa at room temperature and 133 MPa at 350℃,surpassing that of traditional B_(4)C/Al composites.
基金supported by the National Natural Science Foundation of China(No.51461025).
文摘The effect of the volume fraction of 3D-metal matrix composites(MMC)framework on the compressive properties of 3D interpenetrating hierarchical ZrO_(2)-toughened Al_(2)O_(3)particle(ZTAp)/40Cr steel composites was investigated.The results showed that the compressive properties of the material tended to decrease as the volume fraction of 3D-MMC framework increased.The composite with 35 vol.%3D-MMC had a yield strength of 1455.2 MPa and compressive strength of 1612.8 MPa,which occurred at a strain value of 5.6%.Compared to the homogeneously dispersed composite material,the composite with 35 vol.%3D-MMC had a 144.7%higher yield strength,which occurred at a 20%higher strain.An analysis of the cracks inside the material revealed that the crack was hindered and deflected by the matrix during propagation,which lengthened the crack propagation path and consumed more energy,thus leading to toughening.The results indicated that 3D interpenetrating hierarchical structure had a strengthening and toughening effect on ZTAp/40Cr composites.
基金the financial support from National Natural Science Foundation of China(No.52262010)the Guangxi Natural Science Foundation of China(No.2023GXNSFAA026384)the Guilin Scientific Research and Technology Development Program(No.2020011203-3).
文摘Aluminum oxide(Al_(2)O_(3))ceramics have been widely utilized as circuit substrates owing to their exceptional performance.In this study,boron nitride microribbon(BNMR)/Al_(2)O_(3)composite ceramics are prepared using spark plasma sintering(SPS).This study examines the effect of varying the amount of toughened phase BNMR on the density,mechanical properties,dielectric constant,and thermal conductivity of BNMR/Al_(2)O_(3)composite ceramics while also exploring the mechanisms behind the toughening and increased thermal conductivity of the fabricated ceramics.The results showed that for a BNMR content of 5 wt%,BNMR/Al_(2)O_(3)composite ceramics displayed more enhanced characteristics than pure Al_(2)O_(3)ceramics.In particular,the relative density,hardness,fracture toughness,and bending strength were 99.95%±0.025%,34.11±1.5 GPa,5.42±0.21 MPa·m^(1/2),and 375±2.5 MPa,respectively.These values represent increases of 0.76%,70%,35%,and 25%,respectively,compared with the corresponding values for pure Al_(2)O_(3)ceramics.Furthermore,during the SPS process,BNMRs are subjected to high temperatures and pressures,resulting in the bending and deformation of the Al_(2)O_(3)matrix;this leads to the formation of special thermal pathways within it.The dielectric constant of the composite ceramics decreased by 25.6%,whereas the thermal conductivity increased by 45.6%compared with that of the pure Al_(2)O_(3)ceramics.The results of this study provide valuable insights into ways of enhancing the performance of Al_(2)O_(3)-based ceramic substrates by incorporating novel BNMRs as a second phase.These improvements are significant for potential applications in circuit substrates and related fields that require high-performance materials with improved mechanical properties and thermal conductivities.
