An organic-inorganic hybrid sealing agent was fabricated and used in the plasma sprayed Al_(2)O_(3)-13 wt%TiO_(2)coating,and conventional silicone agent was also used for comparison.Protection performance of the coati...An organic-inorganic hybrid sealing agent was fabricated and used in the plasma sprayed Al_(2)O_(3)-13 wt%TiO_(2)coating,and conventional silicone agent was also used for comparison.Protection performance of the coatings was comprehensively evaluated based on both anti-corrosion and anti-biofouling properties.The results reveal that the sealing treatment is remarkably useful to decrease the porosity of the coating,and the porosity of the coating sealed with the hybrid agent is only 0.035%.Immersion corrosion test and Tafel polarization test reveal that the sealed coating with the hybrid agent exhibits a better corrosion resistance by compared with the coating sealed with silicone agent.The corrosion current density i_(corr) of the hybrid agent sealed coating is only 0.7×10^(-6)A·cm^(-2).Moreover,anti-biofouling tests both in the outdoor analogue hydraulic environment and in the natural marine environment prove that the mentioned novel coating presents a better combination of corrosion resistance and anti-biofouling property by compared with the other coatings,and it could be used as a protection of metal components in the marine environment.展开更多
A novelγ-γ'(Ni solid solution—Ni_(3)Al)NiPtAl coating was produced on advanced single-crystal(SC)superalloy N5 by electroplating of a thin Pt coating with~3μm in thickness followed by heat treatment at 1000℃i...A novelγ-γ'(Ni solid solution—Ni_(3)Al)NiPtAl coating was produced on advanced single-crystal(SC)superalloy N5 by electroplating of a thin Pt coating with~3μm in thickness followed by heat treatment at 1000℃in vacuum.For comparison,a traditionalγ-γ'NiPtAl coating was also produced by electroplating of a thick Pt coating with~6μm in thickness followed by heat treatment at 1100℃in vacuum.The novel coating has a mass gain of~0.5 mg·cm^(-2)after 100 h 1-h cyclic oxidation at 1150℃,showing better oxidation resistance than the traditional coating.An oxide scale mostly consisting ofα-Al_(2)O_(3)grew on the novel coating because the element Cr from the SC alloy substrate contributes to the formation ofα-Al_(2)O_(3).Pt content in the novel coating has significant effect on the oxidation resistance.The optimized Pt content in the coating is about 16 at%,which is helpful to reduce the diffusion of harmful elements from the substrate into the coating but also to reduce the cost of the coating.展开更多
基金the National Natural Science Foundation of China(No.51379070)the Graduate Research and Innovation Projects of Jiangsu Province(No.KYCX21_0463)。
文摘An organic-inorganic hybrid sealing agent was fabricated and used in the plasma sprayed Al_(2)O_(3)-13 wt%TiO_(2)coating,and conventional silicone agent was also used for comparison.Protection performance of the coatings was comprehensively evaluated based on both anti-corrosion and anti-biofouling properties.The results reveal that the sealing treatment is remarkably useful to decrease the porosity of the coating,and the porosity of the coating sealed with the hybrid agent is only 0.035%.Immersion corrosion test and Tafel polarization test reveal that the sealed coating with the hybrid agent exhibits a better corrosion resistance by compared with the coating sealed with silicone agent.The corrosion current density i_(corr) of the hybrid agent sealed coating is only 0.7×10^(-6)A·cm^(-2).Moreover,anti-biofouling tests both in the outdoor analogue hydraulic environment and in the natural marine environment prove that the mentioned novel coating presents a better combination of corrosion resistance and anti-biofouling property by compared with the other coatings,and it could be used as a protection of metal components in the marine environment.
基金financially sponsored by the National Natural Science Foundations of China(Nos.51590894,51425102,51231001)China Postdoctoral Science Foundation(No.2017T100023)。
文摘A novelγ-γ'(Ni solid solution—Ni_(3)Al)NiPtAl coating was produced on advanced single-crystal(SC)superalloy N5 by electroplating of a thin Pt coating with~3μm in thickness followed by heat treatment at 1000℃in vacuum.For comparison,a traditionalγ-γ'NiPtAl coating was also produced by electroplating of a thick Pt coating with~6μm in thickness followed by heat treatment at 1100℃in vacuum.The novel coating has a mass gain of~0.5 mg·cm^(-2)after 100 h 1-h cyclic oxidation at 1150℃,showing better oxidation resistance than the traditional coating.An oxide scale mostly consisting ofα-Al_(2)O_(3)grew on the novel coating because the element Cr from the SC alloy substrate contributes to the formation ofα-Al_(2)O_(3).Pt content in the novel coating has significant effect on the oxidation resistance.The optimized Pt content in the coating is about 16 at%,which is helpful to reduce the diffusion of harmful elements from the substrate into the coating but also to reduce the cost of the coating.
