Active sites contribution from nanostructured interface of palladium and cerium oxide with enhanced catalytic performance for alcohols oxidation in alkaline solution

Nanostructured interface is significant for the electrocatalysis process. Here we comparatively studied the electrooxidation of alcohols catalyzed by nanostructured palladium or palladium-cerium oxide. Two kinds of active sites were observed in palladium-cerium oxide system, attributing to the co-action of Pd-cerium oxide interface and Pd sites alone, by CO stripping technique, a structure-sensitive process generally employed to probe the active sites. Active sites resulting from the nanostructured interfacial contact of Pd and cerium oxide were confirmed by high resolution transmission electron microscopy and electrochemical CO stripping approaches. Electrochemical measurements of cyclic voltammetry and chronometry results demonstrated that Pd-cerium oxide catalysts exhibited much higher catalytic performances for alcohols oxidation than Pd alone in terms of activity, stability and anti-poisoning ability.The improved performance was probably attributed to the nanostructured active interface in which the catalytic ability from each component can be maximized through the synergistic action of bi-functional mechanism and electronic effect. The calculated catalytic efficiency of such active sites was many times higher than that of the Pd active sites alone. The present work showed the significance of valid nanostructured interface design and fabrication in the advanced catalysis system.

A review on photo-, electro- and photoelectro- catalytic strategies for selective oxidation of alcohols

Traditional conversion of alcohols into carbonyl compounds exists a few drawbacks such as harsh reaction conditions,production of large amounts of hazardous wastes,and poor selectivity.The newly emerging conversion approaches via photo-,electro-,and photoelectro-catalysis to oxidize alcohols into high value-added corresponding carbonyl compounds as well as the possible simultaneous production of clean fuel hydrogen(H_(2))under mild conditions are promising to substitute the traditional approach to form greener and sustainable reaction systems and thus have aroused tremendous investigations.In this review,the state-of-the-art photocatalytic,electrocatalytic,and photoelectrocatalytic strategies for selective oxidation of different types of alcohols(aromatic and aliphatic alcohols,single alcohol,and polyols,etc.)as well as the simultaneous production of H_(2) in certain systems are discussed.The design of photocatalysts,electrocatalysts,and photoelectrocatalysts as well as reaction mechanism is summarized and discussed in detail.In the end,current challenges and future research directions are proposed.It is expected that this review will not only deepen the understanding of environmentally friendly catalytic systems for alcohol conversion as well as H_(2) production,but also enlighten significance and inspirations for the follow-up study of selective oxidation of various types of organic molecules to value-added chemicals.

Promoting electrocatalytic alcohols oxidation coupled with H_(2) production via ligand intercalation strategy

Electrochemical alcohol oxidation,the alternate of oxygen evolution reaction,has been recognized as an effective way to produce value-added chemicals coupled with H2 production.However,the current researches still suffer from the low reaction rate and Faradaic efficiency(FE)that limits the overall efficiency.Herein,we report a ligand intercalation strategy to enhance the current density of alcohol electrooxidation by intercalating sodium dodecyl sulfonate(SDS)in the interlayer of Co(OH)_(2)catalyst(Co(OH)_(2)-SDS).For instance,the Co(OH)_(2)-SDS shows obviously enhanced current density for glycerol electrooxidation than that of pure Co(OH)_(2).The corresponding glycerol conversion rate and H2 production rate reach 0.35 mmol·cm^(−2)·h^(−1)and 9.1 mL·cm^(−2)·h^(−1)at 1.42 V vs.reversible hydrogen electrode,which are 2.2-and 1.9-fold higher than that of Co(OH)_(2).The yield of formate reaches 86.6%with selectivity of 95.3%at high glycerol conversion of 95.1%(with FE of 83.3%for glycerol oxidation).The Co(OH)_(2)-SDS is demonstrated efficient for different alcohols with enhanced performance.We confirmed that the intercalation of SDS in Co(OH)_(2)can promote the generation and exposure of CoOOH reactive sites,and also facilitate the adsorption of alcohol,thus enabling high reaction rate.

Novel cobalt(Ⅱ) complexes of amino acids-Schiff bases catalyzed aerobic oxidation of various alcohols to ketones and aldehyde

Two cobalt（Ⅱ） complexes 1 and 2 of Schiff bases derived from amino acids were synthesized and used for oxidation of benzyl alcohol with molecular oxygen at different conditions of pH,solvent,temperature and complex/alcohol molar ratio to optimize reaction conditions and to evaluate the catalytic efficiency of new cobalt Schiff base complexes.Under obtained optimum conditions,various alcohols were oxidized to corresponding aldehydes and ketones.

Covalently integrated core-shell MOF@COF hybrids as efficient visible-light-driven photocatalysts for selective oxidation of alcohols

Building a covalently connected structure with accelerated photo-induced electrons and charge-carrier separation between semiconductors could enhance the photocatalytic performance.In this work,we report a facile and novel seed growth method to coat NH2-MIL-125 MOFs with crystalline and porous covalent organic frameworks(COFs)materials and form a range of NH2-MIL-125@TAPB-PDA nanocomposites with different thicknesses of COF shell.The introduction of appropriate content of COF could not only modify the intrinsic electronic and optical properties,but also enhance the photocatalytic activity distinctly.Especially,NH2-MIL-125@TAPB-PDA-3 with COF shell thickness of around 20nm exhibited the highest yield(94.7%)of benzaldehyde which is approximately 2.5 and 15.5 times as that of parental NH2-MIL-125 and COF,respectively.The promoted photocatalytic performance of hybrid materials was mainly owing to the enhanced photo-induced charge carriers transfer between the MOF and COF through the covalent bond.In addition,a possible mechanism to elucidate the process of photocatalysis was explored.Therefore,this kind of MOF-based photocatalysts possesses great potentials in future green organic synthesis.

Highly Efficient,Green Oxidation of Alcohols Using Novel Heterogeneous Ruthenium Catalyst

MnFe1.4Ru0.45Cu0.15O4 was an effective heterogeneous catalyst for the oxidation of various types of alcohols to the corresponding carbonyl compounds using atmospheric pressure of oxygen under mild conditions. Furthermore, this catalyst was also effective towards alcohol oxidation using water as solvent instead of toluene.

State-of-the-art progress in the selective photo-oxidation of alcohols

Photocatalytic oxidation of alcohols has received more and more attention in recent years following the numerous studies on the degradation of pollutants, hydrogen evolution, and CO_(2) reduction by photocatalysis. Instead of the total oxidation of organics in the degradation process, the photo-oxidation of alcohols aims at the selective conversion of alcohols to produce carbonyl/acid compounds. Promising results have been achieved in designing the catalysts and reaction system, as well as in the mechanistic investigations in the past few years. This review summarizes the state-of-the-art progress in the photo-oxidation of alcohols, including the development of photocatalysts and cocatalysts, reaction conditions including the solvent and the atmosphere, and the exploration of mechanisms with scavengers experiment, electron paramagnetic resonance (EPR) and diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy. The challenges and outlook for the further research in this field are also discussed.

Aromatic alcohols oxidation and hydrogen evolution over π-electron conjugated porous carbon nitride rods

Photocatalysis using polymeric carbon nitride(CN)materials is a constantly evolving field,where the variation of synthetic procedures allows the constant improvement of activity by tackling the intrinsic limitations of these materials(optical absorbance,specific surface area,charge migration,etc.).Amongst the possible photocatalytic reactions,the most popular application of CNs is the hydrogen evolution reaction(HER)from water.In this work,we design precisely-controlled carbon-doped porous CN rods with extended π-electron conjugation from supramolecular assemblies of melem and co-monomers,which partially substitute nitrogen for carbon atoms at the pyrimidine ring of the melem.Dense hydrogen bonds and good thermal stability of the melem-based supramolecular framework allow synthesizing a more ordered structure for improved charge migration;the control from the molecular level over the position of carbon-substituted nitrogen positions tailors the band alignment and photogenerated charge separation.The optimal photocatalyst shows an excellent HER rate(up to 10.16 mmol·h-1·g-1 under 100 W white light-emitting diode(LED)irradiation,with an apparent quantum efficiency of 20.0%at 405 nm,which is 23.2 times higher compared to a reference bulk CN).To fully harness the benefits of the developed metal-free CNs,selective oxidation reaction of aromatic alcohols is demonstrated with high conversion and selectivity.

Modified electronic structure and enhanced hydroxyl adsorption make quaternary Pt-based nanosheets efficient anode electrocatalysts for formic acid-/alcohol-air fuel cells

Surface/interface engineering of a multimetallic nanostructure with diverse electrocatalytic properties for direct liquid fuel cells is desirable yet challenging.Herein,using visible light,a class of quaternary Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)ultrathin nanosheets is fabricated and used as high-performance anode electrocatalysts for formic acid-/alcohol-air fuel cells.The modified electronic structure of Pt,enhanced hydroxyl adsorption,and abundant exterior defects afford Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)/C high intrinsic anodic electrocatalytic activity to boost the power densities of direct formic acid-/methanol-/ethanol-/ethylene glycol-/glycerol-air fuel cells,and the corresponding peak power density of Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)/C is respectively 129.7,142.3,105.4,124.3,and 128.0 mW cm^(-2),considerably outperforming Pt/C.Operando in situ Fourier transform infrared reflection spectroscopy reveals that formic acid oxidation on Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)/C occurs via a CO_(2)-free direct pathway.Density functional theory calculations show that the presence of Ag,Bi,and Te in Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)suppresses CO^(*)formation while optimizing dehydrogenation steps and synergistic effect and modified Pt effectively enhance H_(2)O dissociation to improve electrocatalytic performance.This synthesis strategy can be extended to 43 other types of ultrathin multimetallic nanosheets(from ternary to octonary nanosheets),and efficiently capture precious metals(i.e.,Pd,Pt,Rh,Ru,Au,and Ag)from different water sources.

Ferric acetylacetonate/covalent organic framework composite for high performance photocatalytic oxidation

Ferric acetylacetonate/covalent organic framework(Fe(acac)_(3)/COF)composite was synthesized by interfacial polymerization method at room temperature.The crystal structure,morphology and porosity property of the composite were characterized by X-ray diffraction,scanning electron microscope,transmission electron microscope and nitrogen adsorption.The interaction between Fe(acac)_(3) and COF was investigated by Fourier transform infrared spectra and X-ray photoelectron spectroscopy.The Fe(acac)_(3)/COF composite was used as a photocatalyst for the oxidation of benzyl alcohol under mild conditions.It exhibits high activity and selectivity for the reaction,of which the mechanism was investigated by determining its photoelectric properties.The Fe(acac)_(3)/COF catalyst developed in this work has application potential in other photocatalytic reactions.

Synthesis,Structure and Oxidation Reaction of Tetrakis-pyridino-cobalt(Ⅱ) Dichromate

The title compound was prepared from the mixture of cobalt ( Ⅱ ) acetate, chromium trioxide and pyridine in an aqueous solution, and its structure was determined by X-ray single crystal diffraction method. A number of alcohols, benzyl halides and benzy-lamines can be oxidized by this oxidant to the corresponding aldehydes in high yields.

Coordination cage with structural “defects” and open metal sites catalyzes selective oxidation of primary alcohols

Coordination cages with intrinsic enzyme-like activity are a class of promising catalysts for improving the efficiency of organic reactions.We present herein a viable strategy to conveniently construct multimetallic active sites into a coordination cage via self-assembly of a pre-formed sulfonylcalix[4]arene-based tetranuclear copper(II)precursor and an amino-functionalized dicarboxylate linker.The cage exhibits a“defective”,partially open cylindrical structure and features coordinatively labile dimetallic Cu(II)sites.Modulated by this unique inner cavity environment,promising catalytic activity toward selective oxidation of primary alcohols to carboxylic acids at room temperature is achieved.Mechanistic studies reveal that the coordinatively labile dimetallic Cu(II)sites can efficiently capture and activate the substrate and oxidant to catalyze the reaction,while the confined nano-cavity environment modulates substrate binding and enhances the catalytic turnover.This study provides a new approach to designing biomimetic multifunctional coordination cages and environmentally friendly supramolecular catalysts.

Electron-enriched Pt induced by CoSe_(2)promoted bifunctional catalytic ability for low carbon alcohol fuel electro-reforming of hydrogen evolution

Alcohol fuel electro-reforming is promising for green hydrogen generation while developing efficient bifunctional catalysts for alcohol fuel electrolysis is still very tricky.Herein,we for the first time proposed the electron-enriched Pt induced by CoSe_(2)has an efficient bi-functional catalytic ability for alcohol fuels electro-reforming of hydrogen in acid electrolytes.The theoretical calculation revealed the advantages of electron-enriched Pt surface for the adsorption of intermediate,which is well supported by spectroscopic analysis and CO-stripping techniques.Largely improved catalytic performances of activity,durability,and kinetics are demonstrated compared to the conventional alloy system and commercial Pt/C catalyst,due to the efficient synergism of Pt and CoSe_(2);the peak current density of Pt/CoSe_(2)for methanol(ethanol)oxidation is 87.61(48.27)m A cm^(-2),which is about 3.3(2.0)times higher than that of Pt/C catalyst and 2.0(1.5)times that of the traditional PtCo alloy catalysts.Impressively,about 80%of the initial current was found after 1000 cycles of stability test for alcohol fuel oxidation of Pt/CoSe_(2)catalyst,higher than that of Pt/C(ca.50%)and PtCo catalyst(65%).When Pt/CoSe_(2)catalyst serviced as bi-functional catalysts for electrolyzer,a low cell potential of 0.65(0.78)V for methanol(ethanol)electrolysis was required to reach 10 m A cm^(-2),which was about 1030(900)m V less than that of conventional water electrolysis using Pt/C as the catalyst.The current result is instructive for the design of novel bifunctional catalyst and the understanding of hydrogen generation via alcohol fuel electro-reforming.

Covalent organic framework stabilized CdS nanoparticles as efficient visible-light-driven photocatalysts for selective oxidation of aromatic alcohols

Noble-metal-free photocatalysts with high and stable performance provide an environmentally-friendly and cost-efficient route for green organic synthesis.In this work,CdS nanoparticles with small particle size and different amount were successfully deposited on the surface of covalent organic frameworks(COFs).The deposition of suitable content of CdS on COFs could not only modify the light adsorption ability and the intrinsic electronic properties,but also enhance the photocatalytic activity and cycling performance of CdS for the selective oxidation of aromatic alcohols under visible light.Especially,COF/CdS-3 exhibited the highest yield(97.1%)of benzalde hyde which is approximately 2.5 and 15.9 times as that of parental CdS and COF,respectively.The results show that the combination of CdS and COF can improve the utilization of visible light and the separation of photo-generated charge carriers,and COF with theπ-conjugated system as supports for CdS nanoparticles could provide efficient electron transport channels and improve the photocatalytic performance.Therefore,this kind of COF-supported photocatalysts with accelerated photo-induced electrons and charge-carrier separation between semiconductors possesses great potentials in future green organic synthesis.

Construction of hierarchical photocatalysts by growing ZnIn_(2)S_(4) nanosheets on Prussian blue analogue-derived bimetallic sulfides for solar co-production of H_(2) and organic chemicals

Exploring highly efficient bifunctional photocatalysts for simultaneous H2 evolution and organic chemical production in pure water represents a green route for sustainable solar energy storage and conversion.Herein,a facile strategy was explored for preparing a hierarchical porous heterostructure of Fe_(4)Ni_(5)S_(8)@ZnIn_(2)S_(4)(FNS@ZIS)by the in situ growth of ZIS nanosheets on Prussian blue analogue(PBA)-derived bimetallic FNS sulfides.A series of FNS@ZIS hierarchical structures were facilely prepared by adjusting the loading amount(n%)of FNS(n=19,26,and 32 for FNS@ZIS-1-3).These structures can efficiently drive the solar co-production of H_(2) and organic chemicals.The optimal co-production was achieved with FNS@ZIS-2,affording a H_(2) evolution rate of 10465μmol·g^(-1)·h^(-1),along with high selectivity for the oxidation of benzyl alcohol to benzaldehyde(>99.9%).The performance was 22 and 31 times higher than that of FNS and ZIS,respectively,and even superior to the state-of-the-art results achieved using various sacrificial agents.Further mechanistic study indicated that the unique hierarchical core/shell architecture can facilitate interfacial charge separation,afford bimetallic synergy,abundant active sites and excellent photostability.This work highlights a simple and efficient method for preparing porous multimetallic hierarchical structures for the solar co-production of organic chemicals and H_(2) fuel.

Selective oxidation of alcohols with H2O2 catalyzed by zinc polyoxometalate immobilized on multi-wall carbon nanotubes modified with ionic liquid

In this work,acid functionalized multi-wall carbon nanotubes（MWCNTs） were modified with imidazolium-based ionic liquids.The selective oxidation of various alcohols with hydrogen peroxide catalyzed by [PZnMo2W9O39]^5-,ZnPOM,supported on ionic liquids-modified with MWCNTs,MWCNTAPIB,is reported.This catalyst[ZnPOM@APIB-MWCNT],was characterized by X-ray diffraction,scanning electron microscopy（SEM） and FT-IR spectroscopic methods.This heterogeneous catalyst exhibited high stability and reusability in the oxidation reaction without loss of its catalytic performance.

Morphology-dependent structures and catalytic performances of Au nanostructures on Cu_2O nanocrystals synthesized by galvanic replacement reaction

Au nanostructures were prepared on uniform Cu2O octahedra and rhombic dodecahedra via the galvanic replacement reaction between HAuCl 4 and Cu2O. The compositions and structures were studied by Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), High-Resolution Transmission Electron Microscope (HRTEM), X-Ray Diffraction (XRD), X-Ray Absorption Spectroscopy (XAS), X-ray Photoelectron Spectroscopy (XPS) and in-situ DRIFTS spectroscopy of CO adsorption. Different from the formation of Au-Cu alloys on Cu2O cubes by the galvanic replacement reaction (ChemNanoMat 2 (2016) 861-865), metallic Au particles and positively-charged Au clusters form on Cu2O octahedra and rhombic dodecahedra at very small Au loadings and only metallic Au particles form at large Au loadings. Metallic Au particles on Cu2O octahedra and rhombic dodecahedra are more active in catalyzing the liquid phase aerobic oxidation reaction of benzyl alcohol than positively-charged Au clusters. These results demonstrate an obvious morphology effect of Cu2O nanocrystals on the liquid-solid interfacial reactions and prove oxide morphology as an effective strategy to tune the surface reactivity and catalytic performance. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Selective oxidation of benzyl alcohols to benzoic acid catalyzed by eco-friendly cobalt thioporphyrazine catalyst supported on silica-coated magnetic nanospheres

A novel magnetically recoverable thioporphyrazine catalyst（CoPz（S-Bu）8/SiO2@Fe3O4） was prepared by immobilization of the cobalt octkis（butylthio） porphyrazine complex（CoPz（S-Bu）8） on silica-coated magnetic nanospheres（SiO2@Fe3O4）. The composite CoPz（S-Bu）8/SiO2@Fe3O4appeared to be an active catalyst in the oxidation of benzyl alcohol in aqueous solution using hydrogen peroxide（H2O2） as oxidant under Xe-lamp irradiation,with 36.4% conversion of benzyl alcohol, about 99% selectivity for benzoic acid and turnover number（TON） of 61.7 at ambient temperature. The biomimetic catalyst CoPz（S-Bu）8was supported on the magnetic carrier SiO2@Fe3O4 so as to suspend it in aqueous solution to react with substrates, utilizing its lipophilicity. Meanwhile the CoPz（S-Bu）8can use its unique advantages to control the selectivity of photocatalytic oxidation without the substrate being subjected to deep oxidation. The influence of various reaction parameters on the conversion rate of benzyl alcohol and selectivity of benzoic acid was investigated in detail. Moreover, photocatalytic oxidation of substituted benzyl alcohols was obtained with high conversion and excellent selectivity, specifically conversion close to 70%, selectivity close to 100% and TON of 113.6 for para-position electron-donating groups. The selectivity and eco-friendliness of the biomimetic photocatalyst give it great potential for practical applications.

PdMoSb trimetallene as high-performance alcohol oxidation electrocatalyst

Metallenes are an emerging class of two-dimensional(2D)material with outstanding potential in electrocatalysis.Herein,we present a new PdMoSb trimetallene produced by a facile wet-chemistry procedure and tested for the alcohol oxidation reaction.PdMoSb shows an extremely high Pd utilization and superior performance toward ethanol,methanol,and glycerol electro-oxidation compared with PdMo and commercial Pd/C catalysts.Experimental results and density functional theory calculations reveal that the enhanced activity relies not only on the high surface area that characterizes the ultrathin 2D metallene structure,but also on the particular electronic configuration of Sb.Sb facilitates OH−adsorption in the reactive-intermediate pathway and strongly enhances the CO tolerance in the poisoning-intermediate pathway for alcohol oxidation.The excellent alcohol oxidation performance of PdMoSb trimetallene demonstrates the high potential of multimetallenes in the field of electrocatalysis.