期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Determination of the effective refractive index of porous silicon/polymer composite films
1
作者 贾振红 《Chinese Optics Letters》 SCIE EI CAS CSCD 2005年第10期608-610,共3页
The equation for calculating the effective refractive index of porous silicon inserted polymer was obtained by three-component Bruggeman effective medium model. The dependence of the effective refractive index of poro... The equation for calculating the effective refractive index of porous silicon inserted polymer was obtained by three-component Bruggeman effective medium model. The dependence of the effective refractive index of porous silicon/polymer composite films on the polymer fraction with various initial porosity was given theorically and experimentally respectively. The porous silicon and polymer polymethylmetacrylate based dispersive red one (PMMA/DR1) composite films were fabricated in our experiments. It is found that the measured effective refractive index of porous silicon inserted polymer was slightly lower than the calculated result because of the oxidization of porous silicon. The effective refractive index of oxidized porous silicon inserted polymer also was analyzed by four-component medium system. 展开更多
关键词 composite materials Dispersion (waves) Oxidation Polymers Polymethyl methacrylates POROSITY porous silicon Refractive index
原文传递
海藻酸钙/多孔硅复合材料对水中铜离子的吸附性能研究 被引量:5
2
作者 张盼 李延辉 +3 位作者 杜秋菊 刘同浩 王宗花 夏延致 《青岛大学学报(自然科学版)》 CAS 2011年第1期42-47,共6页
对比研究了海藻酸钙/多孔硅复合材料和纯多孔硅对铜离子的吸附作用,考察了溶液初始pH、温度、吸附剂加入量和吸附时间等因素对海藻酸钙/多孔硅复合材料吸附铜离子的影响。结果表明:海藻酸钙/多孔硅复合材料在相同铜离子浓度下的吸附性... 对比研究了海藻酸钙/多孔硅复合材料和纯多孔硅对铜离子的吸附作用,考察了溶液初始pH、温度、吸附剂加入量和吸附时间等因素对海藻酸钙/多孔硅复合材料吸附铜离子的影响。结果表明:海藻酸钙/多孔硅复合材料在相同铜离子浓度下的吸附性能优于纯多孔硅,其吸附速率也明显大于纯多孔硅。利用SEM、FTIR、BET等方法分别测定了改性前后多孔硅材料的形貌和物理化学性质。利用Langmuir等温吸附式计算出海藻酸钙/多孔硅复合材料在60℃下和pH为5.0时的铜离子最大吸附量为49.02 mg/g。 展开更多
关键词 海藻酸钙/多孔硅复合材料 多孔硅 铜离子 冷冻干燥 吸附
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部