期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
Evaluating ultrasound signals of carbon steel fatigue testing using signal analysis approaches 被引量:2
1
作者 M.M.Padzi S.Abdullah +2 位作者 M.Z.Nuawi S.M.Beden Z.M.Nopiah 《Journal of Central South University》 SCIE EI CAS 2014年第1期232-241,共10页
The application of ultrasound techniques to monitor the condition of structures is becoming more prominent because these techniques can detect the early symptoms of defects such as cracks and other defects.The early d... The application of ultrasound techniques to monitor the condition of structures is becoming more prominent because these techniques can detect the early symptoms of defects such as cracks and other defects.The early detection of defects is of vital importance to avoid major failures with catastrophic consequences.An assessment of an ultrasound technique was used to investigate fatigue damage behaviour.Fatigue tests were performed according to the ASTM E466-96 standard with the attachment of an ultrasound sensor to the test specimen.AISI 1045 carbon steel was used due to its wide application in the automotive industry.A fatigue test was performed under constant loading stress at a sampling frequency of 8 Hz.Two sets of data acquisition systems were used to collect the fatigue strain signals and ultrasound signals.All of the signals were edited and analysed using a signal processing approach.Two methods were used to evaluate the signals,the integrated Kurtosis-based algorithm for z-filter technique(I-kaz) and the short-time Fourier transform(STFT).The fatigue damage behaviour was observed from the initial stage until the last stage of the fatigue test.The results of the I-kaz coefficient and the STFT spectrum were used to explain and describe the behaviour of the fatigue damage.I-kaz coefficients were ranged from 60 to 61 for strain signals and ranged from 5 to 76 for ultrasound signals.I-kaz values tend to be high at failure point due to high amplitude of respective signals.STFT spectrogram displays the colour intensity which represents the damage severity of the strain signals.I-kaz technique is found very useful and capable in assessing both stationary and non-stationary signals while STFT technique is suitable only for non-stationary signals by displaying its spectrogram. 展开更多
关键词 fatigue ULTRASOUND signal analysis integrated Kurtosis-based algorithm for z-filter technique short-time Fouriertransform
下载PDF
Gray weighted algorithm for variable voltage CT reconstruction
2
作者 李权 陈平 潘晋孝 《Journal of Measurement Science and Instrumentation》 CAS 2014年第4期52-56,共5页
In conventional computed tomography (CT) reconstruction based on fixed voltage, the projective data often ap- pear overexposed or underexposed, as a result, the reconstructive results are poor. To solve this problem... In conventional computed tomography (CT) reconstruction based on fixed voltage, the projective data often ap- pear overexposed or underexposed, as a result, the reconstructive results are poor. To solve this problem, variable voltage CT reconstruction has been proposed. The effective projective sequences of a structural component are obtained through the variable voltage. The total variation is adjusted and minimized to optimize the reconstructive results on the basis of iterative image using algebraic reconstruction technique (ART). In the process of reconstruction, the reconstructive image of low voltage is used as an initial value of the effective proiective reconstruction of the adjacent high voltage, and so on until to the highest voltage according to the gray weighted algorithm. Thereby the complete structural information is reconstructed. Simulation results show that the proposed algorithm can completely reflect the information of a complicated structural com- ponent, and the pixel values are more stable than those of the conventional. 展开更多
关键词 variable voltage computed tomography (CT) reconstruction total variation-algebraic reconstruction technique (TV-ART) algorithm gray weight effective projection
下载PDF
Stability of multiple fans in mine ventilation networks 被引量:6
3
作者 El-Nagdy K.A. 《International Journal of Mining Science and Technology》 SCIE EI 2013年第4期558-560,共3页
In large mines,single fan is usually not enough to ventilate all the working areas.Single mine-fan approach cannot be directly applied to multiple-fan networks because the present of multiple pressures and air quantit... In large mines,single fan is usually not enough to ventilate all the working areas.Single mine-fan approach cannot be directly applied to multiple-fan networks because the present of multiple pressures and air quantities associated with each fan in the network.Accordingly,each fan in a multiple-fan system has its own mine characteristic curve,or a subsystem curve.Under some consideration,the conventional concept of a mine characteristic curve of a single-fan system can be directly extended to that of a particular fan within a multiple-fan system.In this paper the mutual effect of the fans on each other and their effect on the stability of the ventilation network were investigated by Hardy Cross algorithm combined with a switching-parameters technique.To show the validity and reliability of this algorithm,the stability of the ventilation system of Abu-Tartur Mine(one of the largest underground mine in Egypt)has been studied. 展开更多
关键词 Mine ventilation Multiple fan ventilated network Hardy Cross algorithm Switching parameters technique Abu-Tartur Mine
下载PDF
A Ka-band Solid-state Transmitter Cloud Radar and Data Merging Algorithm for Its Measurements 被引量:8
4
作者 Liping LIU Jiafeng ZHENG Jingya WU 《Advances in Atmospheric Sciences》 SCIE CAS CSCD 2017年第4期545-558,共14页
This study concerns a Ka-band solid-state transmitter cloud radar, made in China, which can operate in three different work modes, with different pulse widths, and coherent and incoherent integration numbers, to meet ... This study concerns a Ka-band solid-state transmitter cloud radar, made in China, which can operate in three different work modes, with different pulse widths, and coherent and incoherent integration numbers, to meet the requirements for cloud remote sensing over the Tibetan Plateau. Specifically, the design of the three operational modes of the radar(i.e., boundary mode M1, cirrus mode M2, and precipitation mode M3) is introduced. Also, a cloud radar data merging algorithm for the three modes is proposed. Using one month's continuous measurements during summertime at Naqu on the Tibetan Plateau,we analyzed the consistency between the cloud radar measurements of the three modes. The number of occurrences of radar detections of hydrometeors and the percentage contributions of the different modes' data to the merged data were estimated.The performance of the merging algorithm was evaluated. The results indicated that the minimum detectable reflectivity for each mode was consistent with theoretical results. Merged data provided measurements with a minimum reflectivity of -35 dBZ at the height of 5 km, and obtained information above the height of 0.2 km. Measurements of radial velocity by the three operational modes agreed very well, and systematic errors in measurements of reflectivity were less than 2 dB. However,large discrepancies existed in the measurements of the linear depolarization ratio taken from the different operational modes.The percentage of radar detections of hydrometeors in mid- and high-level clouds increased by 60% through application of pulse compression techniques. In conclusion, the merged data are appropriate for cloud and precipitation studies over the Tibetan Plateau. 展开更多
关键词 data merging algorithm operational mode Ka-band radar cloud Tibetan Plateau pulse compression technique
下载PDF
Operational Modal Analysis of a Ship Model in the Presence of Harmonic Excitation 被引量:1
5
作者 Junchen Xu Ming Hong Xiaobing Liu 《Journal of Marine Science and Application》 2013年第1期38-44,共7页
A ship is operated under an extremely complex environment, and waves and winds are assumed to be the stochastic excitations. Moreover, the propeller, host and mechanical equipment can also induce the harmonic response... A ship is operated under an extremely complex environment, and waves and winds are assumed to be the stochastic excitations. Moreover, the propeller, host and mechanical equipment can also induce the harmonic responses. In order to reduce structural vibration, it is important to obtain the modal parameters information of a ship. However, the traditional modal parameter identification methods are not suitable since the excitation information is difficult to obtain. Natural excitation technique-eigensystem realization algorithm (NExT-ERA) is an operational modal identification method which abstracts modal parameters only from the response signals, and it is based on the assumption that the input to the structure is pure white noise. Hence, it is necessary to study the influence of harmonic excitations while applying the NExT-ERA method to a ship structure. The results of this research paper indicate the practical experiences under ambient excitation, ship model experiments were successfully done in the modal parameters identification only when the harmonic frequencies were not too close to the modal frequencies. 展开更多
关键词 natural excitation technique (NExT) eigensystem realization algorithm (ERA) ship structure harmonic excitation signal processing modal parameters identification ship model operational model analysis
下载PDF
Simultaneous Perturbation Stochastic Approximation Algorithm Combined with Neural Network and Fuzzy Simulation
6
作者 宁玉富 唐万生 郭长友 《Transactions of Tianjin University》 EI CAS 2008年第1期43-49,共7页
In order to solve three kinds of fuzzy programm model, fuzzy chance-constrained programming mode ng models, i.e. fuzzy expected value and fuzzy dependent-chance programming model, a simultaneous perturbation stochast... In order to solve three kinds of fuzzy programm model, fuzzy chance-constrained programming mode ng models, i.e. fuzzy expected value and fuzzy dependent-chance programming model, a simultaneous perturbation stochastic approximation algorithm is proposed by integrating neural network with fuzzy simulation. At first, fuzzy simulation is used to generate a set of input-output data. Then a neural network is trained according to the set. Finally, the trained neural network is embedded in simultaneous perturbation stochastic approximation algorithm. Simultaneous perturbation stochastic approximation algorithm is used to search the optimal solution. Two numerical examples are presented to illustrate the effectiveness of the proposed algorithm. 展开更多
关键词 fuzzy variable fuzzy programming fuzzy simulation neural network approximation theory perturbation techniques computer simulation simultaneous perturbation stochasticapproximation algorithm
下载PDF
Fingerprint-Based Identity Authentication and Digital Media Protection in Network Environment 被引量:6
7
作者 田捷 李亮 杨鑫 《Journal of Computer Science & Technology》 SCIE EI CSCD 2006年第5期861-870,共10页
Current information security techniques based on cryptography are facing a challenge of lacking the exact connection between cryptographic key and legitimate users. Biometrics, which refers to distinctive physiologica... Current information security techniques based on cryptography are facing a challenge of lacking the exact connection between cryptographic key and legitimate users. Biometrics, which refers to distinctive physiological and behavioral characteristics of human beings, is a more reliable indicator of identity than traditional authentication system such as passwords-based or tokens-based. However, researches on the seamless integration biometric technologies, e.g., fingerprint recognition, with cryptosystem have not been conducted until recent years. In this paper, we provide an overview of recent advancements in fingerprint recognition algorithm with a special focus on the enhancement of low-quality fingerprints and the matching of the distorted fingerprint images, and discuss two representative methods of key release and key generation scheme based on fingerprints. We also propose two solutions for the application in identity authentication without trustworthy thirdparty in the network environment, and application in digital media protection, aiming to assure the secrecy of fingerprint template and fingerprint-based user authentication. 展开更多
关键词 BIOMETRICS fingerprint recognition CRYPTOSYSTEM techniques and algorithms information security
原文传递
An adaptive laser beam shaping technique based on a genetic algorithm 被引量:10
8
作者 杨平 刘渊 +4 位作者 杨伟 敖明武 胡诗杰 许冰 姜文汉 《Chinese Optics Letters》 SCIE EI CAS CSCD 2007年第9期497-500,共4页
A new adaptive beam intensity shaping technique based on the combination of a 19-element piezo-electricity deformable mirror (DM) and a global genetic algorithm is presented. This technique can adaptively adjust the... A new adaptive beam intensity shaping technique based on the combination of a 19-element piezo-electricity deformable mirror (DM) and a global genetic algorithm is presented. This technique can adaptively adjust the voltages of the 19 actuators on the DM to reduce the difference between the target beam shape and the actual beam shape. Numerical simulations and experimental results show that within the stroke range of the DM, this technique can be well used to create the given beam intensity profiles on the focal plane. 展开更多
关键词 GA An adaptive laser beam shaping technique based on a genetic algorithm FIGURE FDM
原文传递
Penalty Formulations and Trap-Avoidance Strategies for Solving Hard Satisfiability Problems
9
作者 BenjaminW.Wah ZheWu 《Journal of Computer Science & Technology》 SCIE EI CSCD 2005年第1期3-17,共15页
In this paper we study the solution of SAT problems formulated as discretedecision and discrete constrained optimization problems. Constrained formulations are better thantraditional unconstrained formulations because... In this paper we study the solution of SAT problems formulated as discretedecision and discrete constrained optimization problems. Constrained formulations are better thantraditional unconstrained formulations because violated constraints may provide additional forces tolead a search towards a satisfiable assignment. We summarize the theory of extended saddle pointsin penalty formulations for solving discrete constrained optimization problems and the associateddiscrete penalty method (DPM). We then examine various formulations of the objective function,choices of neighborhood in DPM, strategies for updating penalties, and heuristics for avoidingtraps. Experimental evaluations on hard benchmark instances pinpoint that traps contributesignificantly to the inefficiency of DPM and force a trajectory to repeatedly visit the same set ofor nearby points in the original variable space. To address this issue, we propose and study twotrap-avoidance strategies. The first strategy adds extra penalties on unsatisfied clauses inside atrap, leading to very large penalties for unsatisfied clauses that are trapped more often and makingthese clauses more likely to be satisfied in the future. The second strategy stores information onpoints visited before, whether inside traps or not, and avoids visiting points that are close topoints visited before. It can be implemented by modifying the penalty function in such a way that,if a trajectory gets close to points visited before, an extra penalty will take effect and force thetrajectory to a new region. It specializes to the first strategy because traps are special cases ofpoints visited before. Finally, we show experimental results on evaluating benchmarks in the DIMACSand SATLIB archives and compare our results with existing results on GSAT, WalkSAT, LSDL, andGrasp. The results demonstrate that DPM with trap avoidance is robust as well as effective forsolving hard SAT problems. 展开更多
关键词 knowledge representation and reasoning techniques of algorithms constraintsatisfaction boolean satisfiability penalty formulation saddle point SEARCH
原文传递
Semi-Empirical, Multi-Wavelength Raman Gain Engineering Algorithm with Pump Interaction Compensation Technique
10
作者 Jaehyoung Park Jonghan Park +1 位作者 Hansuek Lee Namkyoo Park 《光学学报》 EI CAS CSCD 北大核心 2003年第S1期407-408,共2页
We propose a simple algorithm for the precise engineering of multi-channel gain profile of Raman amplifier. By employing a linear approximation in the pump interaction calculation, together with a semi-empirical pump ... We propose a simple algorithm for the precise engineering of multi-channel gain profile of Raman amplifier. By employing a linear approximation in the pump interaction calculation, together with a semi-empirical pump power correction using the simplistic output signal spectrum measurement, excellent gain engineering capability has been demonstrated for various target gain profiles, within +/- 0.4dB of error. 展开更多
关键词 with in length from SEMI-EMPIRICAL Multi-Wavelength Raman Gain Engineering Algorithm with Pump Interaction Compensation Technique
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部