Geochemical Trace of Silicon Isotopes of Intrusions and Ore Veins Related to Alkali-rich Porphyry Deposits in Western Yunnan, China

Western Yunnan is the well-known polymetallic province in China. It is characterized by copper-gold mineralization related to Cenozoic alkali-rich porphyry. This paper analyzes the silicon isotope data obtained from four typical alkali-rich porphyry deposits based on the dynamic fractionation principle of silicon isotope. The study shows that the ore materials should originate mainly from alkali-rich magmas, together with silicon-rich mineralizing fluids. The process of mineralization was completed by auto-metasomatism, i.e. silicon-rich mineralizing fluids (including alkali-rich porphyry and wall-rock strata) replaced and altered the country rocks and contaminated with crustal rocks during the crystallization of alkali-rich magmas. Such a process is essentially the continuance of the metasomatism of mantle fluids in crust's mineralization. This provides important evidence of silicon isotopic geochemistry for better understanding the mineralization of the Cenozoic alkali-rich porphyry polymetallic deposits

MINERALOGICAL FEATURES OF ULTRAMAFIC HYPOXENOLITHS IN ALKALI-RICH PORPHYRY

Ultramafic hypoxenoliths found in the alkali-rich porphyry in the Liuhe Village, Heqing, Yunnan, China, are of great significance in understanding the origin and evolution of the porphyry. This paper discusses the mineralogical features of the hypoxenoliths. It shows that the xenoliths are characterized by the upper mantle rocks modified to certain extent by the enriched mantle fluid metasomatism in the mantle environment, with the enriched mantle property of low-degree partial melting. This constitutes the important mineralogical evidence for the petrogenesis and mineralization of alkali-rich porphyry.

Geochemistry and Geochronology of the Cenozoic Zhalaga Granitoids of the Yulong Alkali-rich Porphyry Belt in Eastern Tibet(Xizang), SW China: Petrogenesis and Tectonic Implications

Large-scale Cenozoic magmatic rocks from the interplay between the Indian and Eurasian plate are exposed in the Yulong porphyry copper belt in the northern Jinshajiang-Ailaoshan domain.Alkali-rich magmas along the Yulong porphyry copper belt can reveal the tectono-magmatic processes in the Sanjiang region.In this study,we present new zircon U-Pb-Hf isotopes and whole rock geochemistry of Cenozoic granitoids from the Zhalaga area in the northern Yulong porphyry copper belt.The Zircon U-Pb dating results show that the Zhalaga granitic porphyry crystallized at ca.42-38 Ma.These porphyry deposits are depleted in Nb,Ta,Sr,and Ti enriched in alkaline and rare earth elements(REEs),and exhibit high zircon saturation temperatures,that strongly indicate A-type affinity.These data and the generally positiveεHf(t)values(2.0-4.5)suggest the magmas originated from a hybrid of partial melting of subduction-modified lithospheric mantle,possibly triggered by upwelling of the asthenospheric mantle.Geochronological and geochemical data of the current and previous studies distinguish three magmatic phases during the Cenozoic in the Jinshajiang-Ailaoshan region:(1)ca.62-48 Ma;(2)ca.44-30 Ma;and(3)ca.28-16 Ma.The strong collision between the Indian and Eurasian plates produced relatively fast convergence rates during the first episode(ca.62-48 Ma),whereas the subsequent right-lateral strike-slip faulting in the Jinshajiang fault zone initiated at ca.43 Ma is associated with the relatively low India-Eurasia convergence rates during ca.44-30 Ma.These significantly impacted the nature and spatial distribution of the magmatism and the large-scale metallogeny during the Cenozoic in the Sanjiang region.We suggest that the Zhalaga alkali-rich magmas occurred in a transition period from involving soft to hard collisional settings.This remarkable example demonstrates that alkali-rich magmas with A-type affinity are also generated in an orogenic tectonic setting.

PROPERTY AND METALLOGENIC CHARACTERISTICS OF ALKALI-RICH PORPHYRY IN WESTERN MARGIN OF YANGTZE PLATFORM

The age of alkali rich porphyries in the western margin of Yangtze Platform is 30—50 Ma; the minerals mainly are orthoclase, quartz, plagioclase; the chemical composition is alkali rich [(K 2O+Na 2O)>8%],high potash[(K 2O+Na 2O)=5.09%-8.30%]; the content of REE is relatively low, LREE is concentrated, without anomaly of europium; the average initial ratio of 87 Sr/ 86 Sr is 0.7073; the value of δ 34 S similar to that of the meteoritic sulfur; the ratio of Pb isotope corresponds to that of upper mantle; metallogenic types belong to Cu, Mo, Au, Ag, Pb, Zn polymetal mineralization and rare, rare earth metal mineralization.

Mineral Geochemistry of Apatite in the Jiama PorphyrySkarn Deposit,Tibet and its Geological Significance

The Jiama deposit,a significant porphyry-skarn-type copper polymetallic deposit located within the Gangdese metallogenic belt in Tibet,China,exemplifies a typical porphyry metallogenic system.However,the mineral chemistry of its accessory minerals remains under-examined,posing challenges for resource assessment and ore prospecting.Utilizing electron microprobe analysis and LA-ICP-MS analysis,this study investigated the geochemical characteristics of apatite in ore-bearing granite and monzogranite porphyries,as well as granodiorite,quartz diorite,and dark diorite porphyries in the deposit.It also delved into the diagenetic and metallogenic information from these geochemical signatures.Key findings include:(1)The SiO_(2) content,rare earth element(REE)contents,and REE partition coefficients of apatite indicate that the dark diorite porphyry possibly does not share a cogenetic magma source with the other four types of porphyries;(2)the volatile F and Cl contents in apatite,along with their ratio,indicate the Jiama deposit,formed in a collisional setting,demonstrates lower Cl/F ratios in apatite than the same type of deposits formed in a subduction environment;(3)compared to non-ore-bearing rock bodies in other deposits formed in a collisional setting,apatite in the Jiama deposit exhibits lower Ce and Ga contents.This might indicate that rock bodies in the Jiama deposit have higher oxygen fugacity.Nevertheless,the marginal variation in oxygen fugacity between ore-bearing and non-ore-bearing rock bodies within the deposit suggests oxygen fugacity may not serve as the decisive factor in the ore-hosting potential of rock bodies in the Jiama deposit.

A cleaner production strategy for acid mine drainage prevention of waste rock:A porphyry copper case

An in-process technology approach is proposed to identify the source of acid mine drainage(AMD)generation and prevent its formation in a porphyry copper waste rock(WR).Adopting actions before stockpiling the WR enables the establishment of potential contaminants and predicts the more convenient method for AMD prevention.A WR sample was separated into size fractions,and the WR’s net acidgenerating potential was quantified using chemical and mineralogical characterization.The diameter of physical locking of sulfides(DPLS)was determined,and the fractions below the DPLS were desulfurized using flotation.Finally,the WR fractions and tailing from the flotation test were submitted to acid-base accounting and weathering tests to evaluate their acid-generating potential.Results show that the WR’s main sulfide mineral is pyrite,and the DPLS was defined as 850μm.A sulfide recovery of 91%was achieved using a combination of HydroFloat^(®)and Denver cells for a size fraction lower than DPLS.No grinding was conducted.The results show that size fractions greater than DPLS and the desulfurized WR are unlikely to produce AMD.The outcomes show that in-processing technology can be a more proactive approach and an effective tool for avoiding AMD in a porphyry copper WR.

Reduced magma generation and its implications for the Pulang giant porphyry Cu-polymetallic deposit in Northwest Yunnan,China

The Pulang giant porphyry Cu-Mo polymetallic deposit is located in the Zhongdian area in the center of the Sanjiang Tethys tectonic domain,which was formed by the westward subduction of the Garze-Litang oceanic slab beneath the Zhongza massif.Chalcopyrite-pyrrhotite-pyritemolybdenite occurs as disseminations,veins,veinlets,and stockworks distributed in the K-silicate alteration zone in the monzonite porphyry,which is superimposed by propylitization.The chemical compositions of biotite and amphibole analyzed by electron probe microanalysis(EPMA)indicate that the ore-forming magma and exsolved fluids experienced a continuous decrease in the oxygen fugacity(fO_(2)).Primary amphibolite and biotite(type I)crystallized at relatively high temperatures(744-827°C)and low fO_(2)(log fO_(2)=−12.26 to−11.91)during the magmatic stage.Hydrothermal fluids exsolved from the magma have a relatively lower temperature(621-711°C)and fO_(2)(log fO_(2)=−14.36 to−13.32)than the original magma.In addition,the presence of a high abundance of pyrrhotite and an insufficiency of primary magnetite and sulfate in the ore(i.e.,anhydrite and gypsum)indicate that the deposit may be a reduced porphyry deposit.Magma and fluid fO_(2)results,combined with previous research on magmatic fO_(2)at the Pulang deposit,indicate that the magma associated with the reduced Pulang ore assemblages was initially generated as a highly oxidized magma that was subsequently reduced by sedimentary rocks of the Tumugou Formation.

Alkali-rich porphyry and its relation with intraplate deformation of north part of Jinsha River belt in western Yunnan, China

A suite of alkali-rich porphyry with 26. 5–37. 6Ma occur along the Jinsha River suture zone in west Yunnan. They are characterized by LREE-rich distribution patterns and no Eu anomaly. These porphyries have formed in post-collisional environment; (87Sr/8bSr) of porphyries, amphibolite xenolithes and associated basalts are 0.707 3, 0.706 5-0.707 l and0.705 8-0.706 5, ENd(T) are -3.4-6.3, -2.1-7.4 and -3.3 respectively. Pb isotope compositions of these rocks also show a little difference. The evidence shows that the porphyry could be derived from partial melting of the “crust-mantle mixed layer”. The relation between Cenozoic magmatism and intraplate deformation since Paleogene has been discussed.

Effect of low-temperature mineralization of mantle fluid processes: as exemplified by the polymetallic deposits of Cenozoic alkali-rich porphyry of western Yunnan, China

SANJING region (the region of three rivers, i.e. Jinsha-Lanchang-Nujiang rivers) is a very active Cenozoicinterplate deformation area on the east margin of Qinghai-Xizang Plateau, where the alkali-rich porphyrybodies occur extensively and the porphyry-related polymetallic mineral resources are produced. Manystudies on the petrology and geochemistry of the alkali-rich porphyry have been carried out and thegenerally accepted conclusion is that the petrogenesis material source has something to do with the enriched source in the mantle. The integrated interactive factors of the mineralization related to the alkalirich porphyry consist in the favourable combination of the mantle fluid metasomatism, which is derivedfrom the deep processes, and the conducting and controlling roles of the large-scale deep faults. Alongwith the changes in physical and chemical conditions caused by the diffusion of the ore-forming

GENESIS OF THE ALKALI-RICH PORPHYRIES IN YUNNAN

ＧＥＮＥＳＩＳＯＦＴＨＥＡＬＫＡＬＩ－ＲＩＣＨＰＯＲＰＨＹＲＩＥＳＩＮＹＵＮＮＡＮＬａｉＪｉａｎｑｉｎｇＰｅｎｇＳｈｅｎｇｌｉｎ（ＩｎｓｔｉｔｕｔｅｏｆＤｉｗａＴｈｅｏｒｙａｎｄＭｅｔａｌｏｇｅｎｙ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏｆ...

Petrogenesis and Physicochemical Conditions of Fertile Porphyry in Non-arc Porphyry Mineralization:A Case from Habo Porphyry Cu-Mo Deposits,SW China

The Habo deposit is a typical porphyry Cu-Mo deposit in the Ailaoshan–Red River metallogenic belt.Ore minerals in the Habo deposit typically occur as veins in the monzonite porphyry.Zircon U-Pb dating suggests that the monzonite porphyry formed at 35.07±0.38 Ma.The monzonite porphyry is characterized by high SiO_(2),Al_(2)O_(3),K_(2)O and Na_(2)O contents,with A/CNK ratios ranging from 0.97 to 1.02.All samples exhibit fractionated REE patterns,characterized by high(La/Yb)N ratios(9.4–13.6,average of 11.2).They show adakite-like geochemical features,high Sr concentrations(627–751 ppm,average of 700 ppm),low Y concentrations(15.13–16.86 ppm,average of 15.81 ppm)and high Sr/Y values(39.5–47.4,average of 44.3).These samples have high initial^(87)Sr/^(86)Sr ratios(0.7074–0.7076)and negativeεNd(t)values(-5.1 to-3.7),whereas the zirconεHf(t)values range from-2.2 to+0.4,suggesting that the monzonite porphyry was derived from the partial melting of a thickened juvenile lower crust.The oxygen fugacity,calculated on the basis of the chemical composition of the amphiboles,shows?NNO values ranging from+1.65 to+2.16(average of 1.94)and lg(fO_(2))ranging from-12.72 to-11.99(average of-12.25),indicating that the monzonite porphyry has high oxygen fugacity.Zircons have high Ce^(4+)/Ce^(3+)ratios(29.29–164.24,average of 84.92),with high?FMQ values ranging from+0.50 to+1.51(average of 0.87)and high lg(fO_(2))values ranging from-14.72 to-12.85(average of-14.07),which also indicates that the oxygen fugacity of the magma was high.The dissolved water content of the Habo monzonite porphyry is 9.5–11.5 wt%,according to the geochemical characteristics,zircon-saturation thermometry(692–794°C)and the mineral phases(amphibole,no plagioclase)in the deep magma chamber.Combined with previous studies,we propose that the high oxygen fugacity and high water content of magma played key roles in controlling the formation of the Habo and other Cu-Mo-Au deposits in the Ailaoshan–Red River metallogenic belt.

Geochronology,Geochemistry and Petrogenesis of the Bangbule Quartz Porphyry:Implications for Metallogenesis

The Bangbule skarn lead-zinc(Pb-Zn)deposit(>1 Mt Zn+Pb)is located in the western Nyainqentanglha polymetallic metallogenetic belt,central Tibet.Lenticular orebodies are all hosted in skarn and developed in the contact zone between the quartz porphyry and carbonate strata of the mid Paleozoic Middle to Upper Chaguoluoma Formation as well as in carbonate and sandstone beds of the Upper Paleozoic Laga Formation.As a newly discovered skarn deposit,the geological background and metallogenesis of this deposit remain poorly understood.Detailed petrological,geochemical and geochronological data of the ore-related quartz porphyry,helps constrain the mineralization age and contributes to discussion on the ore genesis of the Bangbule deposit.Both endoskarn and exoskarn are identified in the Bangbule deposit.From quartz porphyry to carbonate formation,the exoskarn is zoned from proximal garnet skarn to distal pyroxene skarn.Zircon U-Pb dating results show that the quartz porphyry formed at 73.9±0.8 Ma.Geochemical analysis results show that the quartz porphyry has high contents of SiO_(2)(71.40–74.94 wt%)and K_(2)O+Na_(2)O(3.76–8.46 wt%)with A/CNK values of 0.69 to 1.06.Besides,the quartz porphyry is enriched in large ion lithophile elements(LILEs)and light rare earth elements(LREEs)and have lowεNd(t)(from-8.25 to-8.19)and high initial(^(87)Sr/^(86)Sr)i values(0.713611–0.714478).Major,trace elements and whole-rock F concentration analysis results from the endoskarn samples show higher TFe_(2)O_(3),MgO,CaO,Pb+Zn,W,Sn,Mo and F etc.,and lower alkalis(K_(2)O,Na_(2)O,Sr and Ba)than those of fresh quartz porphyry,indicating that the early ore-forming fluids were an Ca-Fe-F-enriched fluid.Massive ore in the proximal skarn might be related to the high F content in the magma,which lowered the solidus temperature of the quartz porphyry magma and caused a lower temperature of the ore-forming fluids,as well as facilitating the precipitation of sphalerite and galena.Based on the geochemical characteristics presented in this study,we propose that the ore-related quartz porphyry was formed by partial melting of crust materials with some juvenile crustal component input.The partial melting of the middle-upper crust after the initial enrichment of lead and zinc elements are important for the formation of Pb-Zn deposits.The case study of the Bangbule deposit has proven that there is still a crust-derived magmatic source region in the western segment of the central Lhasa terrane.Therefore,there is still great potential for Pb-Zn mineralization and Pb-Zn exploration.

Correction:Gardaneh Salavat porphyry copper system:Is it about metal endowment or fertility of the porphyritic intrusion?

Correction to:Acta Geochim(2022)41(3):496-514 https://doi.org/10.1007/s11631-022-00535-0 In the original publication of the article,under the section“4.1 Proposed hypothesis for Gardaneh Salavat porphyry system”,on page 509,the following sentence“Du and Audétat(2020)believed that early sulfide saturation is not necessarily detrimental to deposit formation or fertility of porphyritic intrusions.Further proving this fact”was included incorrectly.

Gardaneh Salavat porphyry copper system: Is it about metal endowment or fertility of the porphyritic intrusion?

Gardaneh Salavat porphyry copper system is located in the northwest of Iran. It comprises a quartz diorite to diorite porphyritic intrusion that created extensive alteration haloes in the host rocks. Despite all technical considerations, the exploration activities did not yield to ore discovery. As the matter of fact, all of the geological,geophysical, and geochemical characteristics of a porphyry Cu-Au deposit exist but there is no economic mineralization. Detailed examinations suggest that the only reasonable explanation can be related to the infertility or low metal endowment of the porphyritic intrusion. The reasons include(1) anomalous ranges of Cu, Au, and Mo rather than economic ore grades,(2) weakly development of potassic alteration,(3) probably sulfur saturation of magma that occurred before intrusion emplacement in the host rocks, and(4) probably low metal endowment in the regional scale and the lack of known porphyry copper deposits in close neighborhoods. It is tried to test the proposed hypothesis with the introduced fertility indicators based on major and trace element geochemistry. However,current fertility indicators could not prove or reject the proposed hypothesis for Gardaneh Salavat porphyritic intrusion because of the high-K calc-alkaline to shoshonitic nature of the intrusive rocks together with the unavailability of relatively fresh/unaltered samples. This case study is notable to examine because(1) it shows that characterization of fertile from barren intrusions seems to be as important as vectoring towards concealed porphyry copper deposits, especially while dealing with deep exploration targets that are associated with high financial risks, and(2) it highlights the inefficiencies and uncertainties in introduced magma fertility indicators for porphyry copper intrusions. As a result, it is of high importance to conduct an overarching investigation on other possible fertility indicators as a fundamental need for the future of the exploration industry.

Geology, geochronology, and exploration of the Jiama giant porphyry copper deposit (11 Mt), Tibet, China: A review

Jiama,with more than 11 Mt of copper metal,is the largest porphyry-skarn copper system in the Gangdese metallogenic belt,Tibet,China,creating ideal conditions for deciphering the origin of porphyry ores in a collision setting.Despite massive studies of the geology,chronology,petrogenesis,and ore-related fluids and their sources in Jiama,there is a lack of systematic summaries and reviews of this system.In contrast to traditional porphyry copper systems in a subduction setting,recent studies and exploration suggest that the Jiama deposit includes porphyry-type Mo-Cu,skarn-type Cu polymetallic,vein-type Au and manto orebodies.This paper reviews the latest studies on the geology,chronology,petrogenesis,fluid inclusions,and isotopic geochemistry(hydrogen,oxygen,sulfur,and lead)of the Jiama deposit.Accordingly,a multi-center complex mineralization model was constructed,indicating that multi-phase intrusions from the same magma reservoir can form multiple hydrothermal centers.These centers are mutually independent and form various orebodies or are superimposed on each other and form thick,high-grade orebodies.Finally,a new comprehensive exploration model was established for the Jiama porphyry copper system.Both models established in this study help to refine the theories on continental-collision metallogeny and porphyry copper systems.

Application of tensor CSAMT with high-power orthogonal signal sources in Jiama porphyry copper deposit,South Tibet

The Jiama porphyry copper deposit in Tibet is one of the proven supergiant copper deposits in the Qinghai-Tibet Plateau at present,with the reserves of geological resources equivalent to nearly 20×10^(6) t.However,it features wavy and steep terrain,leading to extremely difficult field operation and heavy interference.This study attempts to determine the effects of the tensor controlled-source audiomagnetotellurics(CSAMT)with high-power orthogonal signal sources(also referred to as the high-power tensor CSAMT)when it is applied to the deep geophysical exploration in plateaus with complex terrain and mining areas with strong interference.The test results show that the high current provided by the highpower tensor CSAMT not only greatly improved the signal-to-noise ratio but also guaranteed that effective signals were received in the case of a long transmitter-receiver distance.Meanwhile,the tensor data better described the anisotropy of deep geologic bodies.In addition,the tests also show that when the transmitting current reaches 60 A,it is still guaranteed that strong enough signals can be received in the case of the transmitter-receiver distance of about 25 km,sounding curves show no near field effect,and effective exploration depth can reach 3 km.The 2D inversion results are roughly consistent with drilling results,indicating that the high-power tensor CSAMT can be used to achieve nearly actual characteristics of underground electrical structures.Therefore,this method has great potential for application in deep geophysical exploration in plateaus and mining areas with complex terrain and strong interference,respectively.This study not only serves as important guidance on the prospecting in the Qinghai-Tibet Plateau but also can be used as positive references for deep mineral exploration in other areas.

Textural and compositional variation of mica from the Dexing porphyry Cu deposit:constraints on the behavior of halogens in porphyry systems

The Dexing porphyry deposit is the largest porphyry Cu–Mo–Au deposit in South China.Biotite composition can record the physicochemical conditions and evolution history of magmatic-hydrothermal system.Biotite from the Dexing porphyry deposit could be divided to three types:primary magmatic biotite(Bi-M),hydrothermal altered magmatic biotite(Bi-A)and hydrothermal biotite(Bi-H).The temperature of Bi-M and Bi-H range from 719 to 767℃ and 690 to 727℃,respectively.Both magmatic and hydrothermal biotite have high Fe^(3+)/Fe^(2+)ratios(from 0.18 to 0.24)and XMgvalues(from 0.57 to 0.66),indicating a high oxygen fugacity.BiM has F lower than Bi-A and Bi-H(up to 0.26 wt%),but has Cl(Cl=0.18–0.30 wt%)similar to Bi-A and Bi-H(Cl=0.21–0.35 wt%),suggesting that high Cl/F ratios of early hydrothermal fluid may result from the exsolution from high Cl magma.From potassic alteration zone to phyllic and propylitic alteration zones,Cl decreases with increasing Cu,whereas F increases roughly.Therefore,Cl mostly originate from magma,but enrichment of F possibly results from reaction of fluids and Neoproterozoic strata.Negative correlation between Cl and Cu indicates that Cl might act as an important catalyst during Cu mineralization process.Biotite from Dexing has similar halogen compositions to other porphyry Cu-/Mo deposits in the world.Chlorine contents of hydrothermal fluid may be critical for Cu transportation and enrichment,while consumption of Cl would promote Cu deposition.

Geology and mineralization of the Daheishan supergiant porphyry molybdenum deposit(1.65 Bt),Jilin,China:A review

The Daheishan supergiant porphyry molybdenum deposit(also referred to as the Daheishan deposit)is the second largest molybdenum deposit in Asia and ranks fifth among the top seven molybdenum deposits globally with total molybdenum reserves of 1.65 billion tons,an average molybdenum ore grade of 0.081%,and molybdenum resources of 1.09 million tons.The main ore body is housed in the granodiorite porphyry plutons and their surrounding inequigranular granodiorite plutons,with high-grade ores largely located in the ore-bearing granodiorite porphyries in the middle-upper part of the porphyry plutons.Specifically,it appears as an ore pipe with a large upper part and a small lower part,measuring about 1700 m in length and width,extending for about 500 m vertically,and covering an area of 2.3 km^(2).Mineralogically,the main ore body consists of molybdenite,chalcopyrite,and sphalerite horizontally from its center outward and exhibits molybdenite,azurite,and pyrite vertically from top to bottom.The primary ore minerals include pyrite and molybdenite,and the secondary ore minerals include sphalerite,chalcopyrite,tetrahedrite,and scheelite,with average grades of molybdenum,copper,sulfur,gallium,and rhenium being 0.081%,0.033%,1.67%,0.001%,and 0.0012%,respectively.The ore-forming fluids of the Daheishan deposit originated as the CO_(2)-H_(2)O-NaCl multiphase magmatic fluid system,rich in CO_(2)and bearing minor amounts of CH4,N2,and H2S,and later mixed with meteoric precipitation.In various mineralization stages,the ore-forming fluids had homogenization temperatures of>420℃‒400℃,360℃‒350℃,340℃‒230℃,220℃‒210℃,and 180℃‒160℃and salinities of>41.05%‒9.8%NaCleqv,38.16%‒4.48%NaCleqv,35.78%‒4.49%NaCleqv,7.43%NaCleqv,and 7.8%‒9.5%NaCleqv,respectively.The mineralization of the Daheishan deposit occurred at 186‒167 Ma.The granites closely related to the mineralization include granodiorites(granodiorite porphyries)and monzogranites(monzogranite porphyries),which were mineralized after magmatic evolution(189‒167 Ma).Moreover,these mineralization-related granites exhibit low initial strontium content and high initial neodymium content,indicating that these granites underwent crust-mantle mixing.The Daheishan deposit formed during the Early-Middle Jurassic,during which basaltic magma underplating induced the lower-crust melting,leading to the formation of magma chambers.After the fractional crystallization of magmas,ore-bearing fluids formed.As the temperature and pressure decreased,the ore-bearing fluids boiled drops while ascending,leading to massive unloading of metal elements.Consequently,brecciated and veinlet-disseminated ore bodies formed.

Geology and mineralization of the Duobaoshan supergiant porphyry Cu-Au-Mo-Ag deposit(2.36 Mt)in Heilongjiang Province,China:A review

The reserves of the Duobaoshan porphyry Cu-Au-Mo-Ag deposit(also referred to as the Duobaoshan porphyry Cu deposit)ranks first among the copper deposits in China and 33rd among the porphyry copper deposits in the world.It has proven resources of copper(Cu),molybdenum(Mo),gold(Au),and silver(Ag)of 2.28×10^(6)t,80×10^(3)t,73 t,and 1046 t,respectively.The major characteristics of the Duobaoshan porphyry Cu deposit are as follows.It is located in a zone sandwiched by the Siberian,North China,and paleo-Pacific plates in an island arc tectonic setting and was formed by the Paleozoic mineralization and the Mesozoic mineralization induced by superposition and transformation.The metallogenic porphyries are the Middle Hercynian granodiorite porphyries.The alterations of surrounding rocks are distributed in a ring form.With silicified porphyries at the center,the alteration zones of K-feldspar,biotite,sericite,and propylite occur from inside to outside.This deposit is composed of 215 ore bodies(including 14 major ore bodies)in four mineralized zones.Ore body No.X in the No.3 mineralized zone has the largest resource reserves,accounting for more than 78%of the total reserves of the deposit.Major ore components include Cu,Mo,Au,Ag,Se,and Ga,which have an average content of 0.46%,0.015%,0.16 g/t,1.22 g/t,0.0003%,and 0.001%-0.003%,respectively.The ore minerals of this deposit primarily include pyrite,chalcopyrite,bornite,and molybdenite,followed by magnetite,hematite,rutile,gelenite,and sphalerite.The ore-forming fluids of this deposit were magmatic water in the early metallogenic stage and then the mixture of meteoric water and magmatic water at the late metallogenic stage.The ore-forming fluids experienced three stages.The ore-forming fluids of stageⅠhad a hydrochemical type of H_(2)O-CO_(2)-Na Cl,an ore-forming temperature of 375-650℃,and ore-forming pressure of 110-160 MPa.The ore-forming fluids of stageⅡhad a hydrochemical type of H_(2)O-CO_(2)-Na Cl,an ore-forming temperature of 310-350℃,and ore-forming pressure of 58-80 MPa.The ore-forming fluids of stageⅢhad a hydrochemical type of Na Cl-H_(2)O,an ore-forming temperature of 210-290℃,and ore-forming pressure of 5-12 MPa.The CuAu-Mo-Ag mineralization mainly occurred at stagesⅠandⅡ,with the ore-forming materials having a mixed crust-mantle source.The Duobaoshan porphyry Cu deposit was formed in the initial subduction environment of the Paleo-Asian Ocean Plate during the Early Ordovician.Then,due to the closure of the Mongol-Okhotsk Ocean and the subduction and compression of the Paleo-Pacific Ocean,a composite orogenic metallogenic model of the deposit was formed.In other words,it is a porphyry-epithermal copper-gold polymetallic mineralization system of composite orogeny consisting of Paleozoic island arcs and Mesozoic orogeny and extension.

巴基斯坦新特提斯构造–岩浆演化与重要金属成矿作用

巴基斯坦在大地构造位置上处于印度、欧亚和阿拉伯三大板块的汇聚带,正同时发生着大陆碰撞和大洋俯冲作用,是研究地球系统深部圈层相互作用与成矿效应的绝佳天然实验室。但是,目前对于巴基斯坦构造演化与成矿作用的研究还不系统,对于巴基斯坦的大型–超大型矿床形成的背景和机制仍不清楚。笔者针对巴基斯坦不同类型的优势矿种开展了深入解剖和对比研究,系统梳理最新研究进展,围绕巴基斯坦新特提斯构造–岩浆演化与成矿作用响应的关键科学问题,分析铜矿、铬铁矿、铅锌矿以及碳酸岩有关的稀土矿床等重要金属成矿类型形成的构造环境以及与区域重大地质事件的耦合关系,总结巴基斯坦区域成矿规律,为资源潜力分析和境内外找矿勘查提供依据。