Preparation and Characterization of Alkyd Resins Based on Citrullus colocynthis Seed Oil

In this study,different samples of alkyd resins based on Citrullus colocynthis seed oil(CCSO)—which has a high content of linoleic acid—were prepared as a renewable raw material.Short(I),medium(II),and long(III)alkyd resins were synthesized using oil,glycerol,and phthalic anhydride(PA)in different proportions.Prunus mahaleb seed oil(PMSO),which contains conjugated linolenic acid,was blended with CCSO in different proportions to examine the effect of PMSO on the film properties of alkyd resins(IV and V).All synthesized resins were characterized by FTIR and 1H NMR spectroscopic analysis.These resins were also cured by an epoxy resin and their film properties(pencil hardness,adhesion,gloss,and chemical resistance)were determined.Analysis of these alkyds reveals that CCSO can be used as a new potential raw material for coating applications.

STUDY ON POLYMERIZATION OF OILLESS ALKYD RESIN WITH PHENYLTRIETHOXYSILANE

Oilless alkyd resin modified with the silicoorganic compounds has been obtained successfully by polymerization.At appropriate proportion of silicoorganic compounds,the polymerized product has higher hardness and lustre than that of oilless alkyd resin.

Investigating the Effect of Catalyst Type and Concentration on the functional Group Conversion in Castor Seed Oil Alkyd Resin Production

Significant scientific and economic benefits may be derived from investigating the best choice of catalyst in the alkyd resin synthesis. The effect of catalyst type and concentration on the production of alkyd resin using castor seed oil (CSO) was evaluated. Lithium hydroxide, lead (II) oxide, calcium carbonate, sodium hydroxide and calcium oxide were investigated. The fatty acid profile of the raw CSO was determined using GC-MS while structural elucidation of the CSO based alkyd resins was determined using FTIR spectrometry. The CSO modified alkyd resin produced has acid values of 5.0, 5.61, 7.0 8.24 and 11 for lithium hydroxide, lead (II) oxide, calcium carbonate, sodium hydroxide and calcium oxide respectively. The extent of reaction was 95%, 95%, 91%, 89% and 88% for lithium hydroxide, lead (II) oxide, calcium carbonate, sodium hydroxide and calcium oxide respectively at the reaction time of 150 minutes. The alcoholysis reaction completion time was fastest in LiOH followed by PbO, CaCO3, NaOH and CaO catalyst. Physico-chemical parameters of the oil and performance evaluation of the alkyd films suggest that they are sustainable materials for surface coating. LiOH shows excellent robustness to expanded process parameters.

Water Repellency of Cellulosic Fibrous Mats Impregnated with Organic Solutions Based on Recycled Polystyrene

Recycled polystyrene in combination with paraffin wax,alkyd resin,and gum rosin were used as components in formulations to investigate their water repellency when applied to cellulosic filter paper substrates.Polystyrene was used in concentration of 5,10,15 and 20%,alkyd resin and gum rosin of 5%each and paraffin wax of 0.5%.Totally,twenty four water repellent solutions were prepared.Water repellency was evaluated in terms of water absorption of the cellulosic fibrous mats.The relations between retention of solid substances of the formulations and grammage and water absorption of filter paper samples were also determined.The results showed that all the water repellent formulations exhibited a degree of water repellency.Water absorption decreased by increasing the polystyrene concentration in the solution and polystyrene retention by the impregnated filter paper samples.The incorporation of 0.5%paraffin wax improved the hydrophobicity of treated samples.The best of the three water repellent formulations including paraffin wax was found to be the“polystyrene+gum rosin+paraffin wax”solution followed by the“polystyrene+alkyd resin+paraffin wax”and“polystyrene+paraffin wax”solution.The inclusion of 5%gum rosin in polystyrene solutions compared to that of 0.5%paraffin wax was found more effective in almost all cases.