Broad-Band All-Optical Wavelength Conversion of Differential Phase-Shift Keyed Signal Using an SOA-Based Nonlinear Polarization Switch

Broad-band all-optical wavelength conversion of differential phase-shift keyed （DPSK） signal is experimentally demonstrated. This scheme is composed of a one-bit delay interferometer demodulation stage followed by a semiconductor optical amplifier （SOA） based nonlinear polarization switch. A wavelength converter for the 10 G b/s DPSK signal is presented, which has a wide wavelength range of more than 30 nm. The converted signals experience small power penalties less than 1.4 dB compared with the original signal, at a bit error rate of 10-9. Additionally, the optical spectra, the measured waveforms and the open eye diagrams of the converted signals show a high quality wavelength conversion performance.

Towards 640 Gbit/s wavelength conversion based on nonlinear polarization rotation in a semiconductor optical amplifier

Taking into account ultra-fast carrier dynamics, this paper models 640 Gbit/s wavelength conversion scheme based on nonlinear polarization rotation （NPR） in a single semiconductor optical amplifier （SOA） and investigates the performance of this kind of wavelength conversion scheme in detail. In this model, two carrier temperature equations are introduced to substitute two energy density equations, which reduce the complexity of calculation in comparison with the previous model. The temporary gain and phase shift dynamics induced by ultra-short optical pulses are numerically simulated and the simulated results are qualitatively in good agreement with reported experimental results. Simulated results show that non-inverted and inverted 640 Gbit/s wavelength conversions based on NPR are achieved with clear open eye diagrams. To further investigate the performance of the non-inverted wavelength conversion scheme, the dependence of output extinction ratio （ER） on some key parameters used in simulation is illustrated. Furthermore, simulated analyses show that high performance non-inverted wavelength conversion based on NPR can be achieved by using a red-shifted filtering scheme.

All-Optical Wavelength Conversion With Multi-Channel Broadcasting at 10 Gb/s Using an Electroabsorption Modulator

All-optical wavelength conversion has been demonstrated with an electroabsorption modulator based on cross-absorption modulation. For the first time, simultaneous broadcasting up to 6 different wavelengths at 10Gb/s is obtained with less than 0.5-dB polarization dependence.

All-Optical Wavelength Conversion with Amplitude Equalization and Pulse Shaping

A dual-wavelength-injection-locked (DWIL) Fabry-Perot (FP) laser is used as an all-optical wavelength converter and regenerator. Regenerated pulses have narrower pulse-width of 37ps. Power penalty and extinction-ratio improvement of 1.5dB and 4dB respectively were achieved.

Single-wall carbon nanotube assisted all-optical wavelength conversion at 2.05μm

We fully demonstrate the special requirements of a mid-infrared all-optical wavelength converter.The construction mechanism of a 2.05μm all-optical wavelength converter based on the single-wall carbon nanotube[SWCNT]is proposed.Systematic experiments are carried out,and the converter device is successfully developed.With the assistance of SWCNT-coated microfiber,the conversion efficiency up to-45.57 d B is realized,and the tuning range can reach9.72 nm.The experimental results verify the correctness of the proposed mechanism and the feasibility of the converter device so that it can be a new technical approach for all-optical wavelength conversion beyond 2μm.We believe the research can extend the application of this composite waveguide in the field of all-optical communication.

Network coding based all-optical multicast in WDM networks

Wavelength division multiplexing （WDM） has been becoming a promising solution to meet the rapidly growing demands on bandwidth. Multicast in WDM networks by employing free wavelength is an efficient approach to saving bandwidth and cost. However, the free wavelength may not identical between different hops in a multicast light-path, particularly in heavy load optical WDM networks. In order to implement multicast applications efficiently, a network coding （NC） technique was introduced into all-optical WDM multicast networks to solve wavelength collision problem between the multicast request and the unicast request. Compared with the wavelength conversion based optical multicast, the network coding based optical multicast can achieve better multicast performance with paying lower cost.