Ultrashort pulse transmission has been recognized as a primary problem that fundamentally hinders the development of ultrafast electronics beyond the current nanosecond timescale.This requires a transmission line or w...Ultrashort pulse transmission has been recognized as a primary problem that fundamentally hinders the development of ultrafast electronics beyond the current nanosecond timescale.This requires a transmission line or waveguide that exhibits an all-pass frequency behavior for the transmitted ultrashort pulse signals.However,this type of waveguiding structure has not yet been practically developed;groundbreaking innovations and advances in signal transmission technology are urgently required to address this scenario.Herein,we present a synthesized all-pass waveguide that demonstrates record guidedwave controlling capabilities,including eigenmode reshaping,polarization rotation,loss reduction,and dispersion improvement.We experimentally developed two waveguides for use in ultrabroad frequency ranges(direct current(DC)-to-millimeter-wave and DC-to-terahertz).Our results suggest that the waveguides can efficiently transmit picosecond electrical pulses while maintaining signal integrity.This waveguide technology is an important breakthrough in the evolution of ultrafast electronics,providing a path towards frequency-engineered ultrashort pulses for low-loss and low-dispersion transmissions.展开更多
In this paper,the theory of uniform filter banks using all-pass tilters is furtherdeveloped.A new structure of two stage filter banks using all-pass filter is proposed,The pre-stage is half-band filter with period,the...In this paper,the theory of uniform filter banks using all-pass tilters is furtherdeveloped.A new structure of two stage filter banks using all-pass filter is proposed,The pre-stage is half-band filter with period,the post-stage is two sets of band-pass filter banks.Thepre-stage filter stop-band just controls the don’t-care-band of the post-stage filter banks usingall-pass polyphase,so as to realize a continuous stop-band property Moreover,a method ofsynthesizing filter bank is derived,which eliminates aliasing and amplitude distortions of theanalysis/synthesis system Finally,an example is given.展开更多
Two novel networks for realizing first-order all-pass transfer functions are intro-duced. The networks use a current conveyer, a buffer and only three passive elements, and theyexhibit a high input impedance.
1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedan...1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedance attract attention, for high input impedance has the advantage that the networksmay be used in cascade without requiring impedance matching device. In the Higashimura and展开更多
A down-conversion in-phase/quadrature (l/Q) mixer employing a folded-type topology, integrated with a passive differential quadrature all-pass filter (D-QAF), in order to realize the final down-conversion stage of...A down-conversion in-phase/quadrature (l/Q) mixer employing a folded-type topology, integrated with a passive differential quadrature all-pass filter (D-QAF), in order to realize the final down-conversion stage of a 60 GHz receiver architecture is presented in this work. Instead of employing conventional quadrature generation techniques such as a polyphase filter or a frequency divider tbr the local oscillator (LO) of the mixer, a passive D-QAF structure is employed. Fabricated in a 65 nm CMOS process, the mixer exhibits a voltage gain of 7-8 dB in an intermediate frequency (IF) band ranging from 10 MHz-1.75 GHz. A fixed LO frequency of 12 GHz is used to down-convert a radio frequency (RF) band of 10.25-13.75 GHz. The mixer displays a third order input referred intercept point (IIP3) ranging from -8.75 to -7.37 dBm for a fixed IF frequency of 10 MHz and a minimum single-sideband noise figure (SSB-NF) of 11.3 dB. The mixer draws a current of 6 mA from a 1.2 V supply voltage dissipating a power of 7.2 mW.展开更多
基金supported in part by the Natural Sciences and Engineering Research Council of Canada(NSERC)Discovery Grantin part by the NSERC–Huawei Industrial Research Chair Program。
文摘Ultrashort pulse transmission has been recognized as a primary problem that fundamentally hinders the development of ultrafast electronics beyond the current nanosecond timescale.This requires a transmission line or waveguide that exhibits an all-pass frequency behavior for the transmitted ultrashort pulse signals.However,this type of waveguiding structure has not yet been practically developed;groundbreaking innovations and advances in signal transmission technology are urgently required to address this scenario.Herein,we present a synthesized all-pass waveguide that demonstrates record guidedwave controlling capabilities,including eigenmode reshaping,polarization rotation,loss reduction,and dispersion improvement.We experimentally developed two waveguides for use in ultrabroad frequency ranges(direct current(DC)-to-millimeter-wave and DC-to-terahertz).Our results suggest that the waveguides can efficiently transmit picosecond electrical pulses while maintaining signal integrity.This waveguide technology is an important breakthrough in the evolution of ultrafast electronics,providing a path towards frequency-engineered ultrashort pulses for low-loss and low-dispersion transmissions.
文摘In this paper,the theory of uniform filter banks using all-pass tilters is furtherdeveloped.A new structure of two stage filter banks using all-pass filter is proposed,The pre-stage is half-band filter with period,the post-stage is two sets of band-pass filter banks.Thepre-stage filter stop-band just controls the don’t-care-band of the post-stage filter banks usingall-pass polyphase,so as to realize a continuous stop-band property Moreover,a method ofsynthesizing filter bank is derived,which eliminates aliasing and amplitude distortions of theanalysis/synthesis system Finally,an example is given.
文摘Two novel networks for realizing first-order all-pass transfer functions are intro-duced. The networks use a current conveyer, a buffer and only three passive elements, and theyexhibit a high input impedance.
文摘1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedance attract attention, for high input impedance has the advantage that the networksmay be used in cascade without requiring impedance matching device. In the Higashimura and
基金Project supported by the National High Technology Research and Development Program of China(No.2011AA010200)
文摘A down-conversion in-phase/quadrature (l/Q) mixer employing a folded-type topology, integrated with a passive differential quadrature all-pass filter (D-QAF), in order to realize the final down-conversion stage of a 60 GHz receiver architecture is presented in this work. Instead of employing conventional quadrature generation techniques such as a polyphase filter or a frequency divider tbr the local oscillator (LO) of the mixer, a passive D-QAF structure is employed. Fabricated in a 65 nm CMOS process, the mixer exhibits a voltage gain of 7-8 dB in an intermediate frequency (IF) band ranging from 10 MHz-1.75 GHz. A fixed LO frequency of 12 GHz is used to down-convert a radio frequency (RF) band of 10.25-13.75 GHz. The mixer displays a third order input referred intercept point (IIP3) ranging from -8.75 to -7.37 dBm for a fixed IF frequency of 10 MHz and a minimum single-sideband noise figure (SSB-NF) of 11.3 dB. The mixer draws a current of 6 mA from a 1.2 V supply voltage dissipating a power of 7.2 mW.