All-silica zeolites screening for capture of toxic gases from molecular simulation

The exhaust gases, including SO_2,NH_3, H_2S, NO_2, NO, and CO, are principal air pollutants due to their severe harms to the ecological environment.Zeolites have been considered as good absorbent candidates to capture the six exhaust gases.In this work, we performed grand canonical ensemble Monte Carlo(GCMC) simulations to examine the capability of 95 kinds of all-silica zeolites in the removal of the six toxic gases, and to predict the adsorption isotherms of the six gases on all the zeolites.The simulation results showed that, H_2S, NO, NO_2, CO and NH_3 are well-captured by zeolite structures with accessible surface area of 1600–1800 m^2·g^(-1) and pore diameter of 0.6–0.7 nm, such as AFY and PAU, while SO_2 is well-adsorbed by zeolites containing larger accessible surface area(1700–2700 m^2·g^(-1)) and pore diameter(0.7–1.4 nm) at room temperature and an atmospheric pressure.However, at saturated adsorption, zeolites RWY, IRR, JSR, TSC, and ITT are found to exhibit better abilities to capture these gases.Our study provides useful computational insights in choosing and designing zeolite structures with high performance to remove toxic gases for air purification, thereby facilitating the development and application of exhaust gas-processing technology in green industry.

Production of linear alkylbenzene over Ce containing Beta zeolites

Ce-encapsulated Beta zeolite was synthesized by a one-pot hydrothermal method with citric acid complexing Ce in the absence of Na species.Additional citric acid can effectively prevent the deposition of Ce species during the hydrothermal synthesis of zeolites,leading to uniform distribution of Ce cluster in the framework of Beta zeolites.Moreover,the sodium-free synthesis system resulted that the Brønsted acid sites were mainly located on the straight channels and external surface of Beta zeolites,improving the utilization of Brønsted acid sites.In addition,Ce encapsulated Beta zeolites showed enhanced activity and robust stability in the alkylation of benzene with 1-dodecene based on the synergistic effect between Ce species and Brønsted acid sites,which pave the way for its practical application in the production of alkylbenzene.

The structure-directing role of heterologous seeds in the synthesis of zeolite

Zeolites have been widely used as catalysts,ion-exchangers,and adsorbents in chemical industries,detergent industry,steel industry,glass industry,ceramic industry,medical and healthfield,and environmentalfield,and recently applied in energy storage.Seed-assisted synthesis is a very effective approach in promoting the crystallization of zeolites.In some cases,the target zeolite cannot be formed in the absence of seed zeolite.In homologous seed-assisted synthesis,the structure of the seed zeolite is the same to that of the target zeolite,while the structure of the seed zeolite is different to that of the target zeolite in the heterologous seed-assisted synthesis.In this review,we briefly summarized the heterologous seed-assisted syntheses of zeolites and analyzed the structure-directing effect of heterologous seeds and surveyed the“common composite building units(CBUs)hypothesis”and the“common secondary building units(SBUs)hypothesis”.However,both hypotheses cannot explain all observations on the heterologous seed-assisted syntheses.Finally,we proposed that the formation of the target zeolite does need nuclei with the structure of target zeolite and the formation of the nuclei of the target zeolite can be promoted by either the undissolved seed crystals with the same CBUs or SBUs to the target zeolite or by the facilitated appropriate distribution of the specific building units due to the presence of the heterologous seed that does not have any common CBUs and SBUs with the target zeolite.

Enhanced ortho-selective t–butylation of phenol over sulfonic acid functionalized mesopore MTW zeolites

Novel organo-inorganic hybrid materials(MTW-x-SO_(3)H) have been fabricated by immobilizing 3-mercap topropyltriethoxysilane onto mesopore MTW zeolites, which is treated via a simple oxidation process with hydrogen peroxide as the oxidant to transform sulfhydryl group into sulfonic acid group. The organic sulfhydryl groups are covalently bonded to the external surface of MTW zeolites through the condensation between siloxane arising from organic fragments with silanol groups on the surface of MTW zeolites, the hybrids contain sulfonic acid group within the external surface of MTW zeolites and an opened mesoporous system in the matrix of MTW zeolites, which provide enough accessible Brùnsted acid sites for the alkylation between phenol with tert-butyl alcohol. Through this methodology it's possible to prepare multifunctional materials where the plenty of mesopores are benefit for the introduction of larger numbers of sulfonic acid groups that contributes to activity during reactions, resulting in high activity(>55%) of MTW-4-SO_(3)H and desired selectivity(>56%) of 2-TBP(2-tert-butyl phenol) in the alkylation between phenol with tert-butyl alcohol.

Y Zeolites Modified by Organosilane for Toluene Adsorption under High Humidity Condition

Y zeolites have moderate microporous pore size, large specific surface area, and good hydrothermal stability, which were widely used in industrial adsorption of volatile organic compounds (VOCs), but the performance of Y zeolites in adsorption of VOCs under high humidity conditions is terrible. In this paper, Y zeolites with different silica-alumina ratios were hydrophobically modified by organosilane and characterized by XRD, FTIR, SEM, BET, NMR. In the experiments of static and dynamic adsorption of VOCs by modified Y zeolites, it can be concluded that the static water adsorption capacity of Y zeolites with silica-aluminum ratio of 5 and 40 after silica modification decreased by 62 wt% and 53 wt%, under the conditions of high humidity, GHSV = 15,000 h-1, T = 35°C and initial concentration of toluene C0 = 5000 mg·m-3. The saturation adsorption capacity of toluene was increased from 0.06 g·g-1, 0.09 g·g-1 to 0.15 g·g-1, 0.21 g·g-1, the adsorption selectivity of Y zeolites for water was reduced and that for toluene was increased after Vapor phase silanization overlay modification. The present modification method might carry out targeted modification of zeolites surface, provide research ideas and guidance under high humidity conditions.

Efficient synthesis of bioetheric fuel additive by combining the reductive and direct etherification of furfural in one-pot over Pd nanoparticles deposited on zeolites

Furfuryl ethers have been considered to be a promising fuel additive.One step reduction etherification of furfural over supported Pd catalysts provides a facile way for the preparation of furfuryl ether.However,the preparation of a reusable Pd catalyst for reductive etherification remains to be a great challenge.In this study,a series of Si O_(2)supported Pd catalysts with particle size ranging from 2.2 nm to 28 nm were prepared.Their textural properties and catalytic performance in furfural reductive etherification have been systematically studied.The results herein shed light on the particle size effect on the competition between hydrogenation/hydrogenolysis of C=O in furfural over Pd surface.We found out that Pd nanoparticles larger than 3 nm are preferred for one step reductive etherification.Based on this finding,we prepared a Pd/ZSM-5 bifunctional catalyst comprising Pd nanoparticles larger than 3 nm and decreased acidity in presence of amino organosilane,which served as a bifunctional catalyst succeeding in one-pot synthesis of ether via reductive-etherification and direct-etherification.This strategy showed significant advantage in efficiently converting furfuryl acohol,a major side-product,into ether,while suppressing the undesired side-reactions.

Study of the Temperature-Programmed Desorption of Carbon Dioxide (CO2) on Zeolites X Modified with Bivalent Cations

Study of physisorbed and chemisorbed carbon dioxide (CO2) species was carried out on the NaX zeolite modified by cationic exchanges with bivalent cations (Ca2+ and Ba2+) by temperature-programmed desorption of CO2 (CO2-TPD). Others results were obtained by infrared to complete the study. The results of this research showed, in the physisorption region (213 - 473 K), that the cationic exchanges on NaX zeolite with bivalent cations increase slightly the interactions of CO2 molecule with adsorbents and/or cationic site. Indeed, the desorption energies of physisorbed CO2 obtained on the reference zeolite NaX (13.5 kJ·mol-1) are lower than that of exchanged zeolites E-CaX and E-BaX (15.77 and 15.17 kJ·mol-1 respectively). In the chemisorbed CO2 region (573 - 873 K), the desorption energies related to desorbed species (bidentate carbonates: CO32-) on the exchanged zeolites E-CaX and E-BaX are about 81 kJ·mol-1, higher than the desorbed species (bicarbonates: HCO32-) on the reference R-NaX (62 kJ·mol-1). In addition, the exchanged E-BaX zeolite develops the secondary adsorption sites corresponding to bicarbonates species with desorption energies of 35 kJ·mol-1 lower to desorption energies of bicarbonates noted on the reference zeolite NaX.

EDTA-LDH/zeolite制备及其对重金属离子的吸附

用水热法和焙烧还原法两步合成了乙二胺四乙酸-水滑石/沸石(EDTA-LDH/zeolite)复合材料,并将其用于去除水溶液中的Cd^(2+)、Pb^(2+)、Cu^(2+),系统研究不同条件下EDTA-LDH/zeolite对单一及混合重金属离子溶液中Cd^(2+)、Pb^(2+)、Cu^(2+)的吸附效果与吸附机制。结果表明,当EDTA-LDH/zeolite投加量为0.05 g、重金属离子浓度为1500 mg/L、pH值为6.5、吸附时间为24 h时,EDTA-LDH/zeolite吸附性能最佳。重金属离子间存在竞争吸附,EDTA-LDH/zeolite对Cd^(2+)、Pb^(2+)、Cu^(2+)的最大吸附容量分别为65.33、98.35和108.51 mg/g。去除过程中沉淀作用、表面络合、螯合反应等多种机制协同作用,去除行为均符合Langmuir等温模型与拟二阶动力学模型。

Synthesis of spherical nano-ZSM-5 zeolite with intergranular mesoporous for alkylation of ethylbenzene with ethanol to produce m-diethylbenzene

Catalytic synthesis of m-diethylbenzene(m-DEB)through alkylation of ethylbenzene(EB)may be a promising alternative route in comparison with traditional rectification of mixed DEB,for which the top priority is to develop efficient and stable heterogeneous catalysts.Here,the spherical nano-ZSM-5 zeolite with abundant intergranular mesoporous is synthesized by the seed-mediated growth method for alkylation of EB with ethanol to produce m-DEB.The results show that the spherical nano-ZSM-5 zeolite exhibits better stability and higher alkylation activity at a lower temperature than those of commercial micropore ZSM-5.And then,the spherical nano-ZSM-5 is further modified by La_(2)O_(3) through acid treatment followed by immersion method.The acid treatment causes nano-ZSM-5 to exhibit the increased pore size but decreased the acid sites,and subsequent La_(2)O_(3) loading reintroduces the weak acid sites.As a result,the HNO_(3)-La_(2)O_(3)-modified catalyst exhibits a slight increase in EB conversion and DEB yield in comparison with unmodified one,and meanwhile,it still maintains high m-DEB selectivity.The catalyst after acid treatment achieves higher catalytic stability besides maintaining the high alkylation activity of EB with ethanol.The present study on the spherical nano-HZSM-5 zeolite and its modification catalyst with excellent alkylation ability provides new insights into the production of mDEB.

Dealuminated Hβ zeolite for selective conversion of fructose to furfural and formic acid

The fructose-to-furfural transformation is facing major challenges in the selectivity and high efficiency. Herein, we have developed a simple and effective approach for the selective conversion of fructose to furfural using Hβ zeolite modified by organic acids for dealuminization to regulate its textural and acidic properties. It was found that citric acid-dealuminized Hβ zeolite possessed high specific surface areas, wide channels and high Brønsted acid amount, which facilitated the selective conversion of fructose to furfural with a maximum yield of 76.2% at433 K for 1 h in the γ-butyrolactone(GBL)-H_(2)O system, as well as the concomitant formation of 83.0% formic acid. The^(13)C-isotope labelling experiments and the mechanism revealed that the selective cleavage of C1–C2 or C5–C6 bond on fructose was firstly occurred to form pentose or C5 intermediate by weak Brønsted acid, which was then dehydrated to furfural by strong Brønsted acid. Also this dealuminized Hβ catalyst showed the great recycling performance and was active for the conversion of glucose and mannose.

OSDA-free synthesis of FeZSM-22 zeolite from natural minerals for n-octane hydroisomerization

A seed-directed approach to synthesizing Fe ZSM-22 zeolite without organic structure directing agent(OSDA)was developed by using Fe-rich diatomite as all aluminum and iron sources.The Fe ZSM-22zeolite with optimal crystallinity and purity can be obtained by systematically adjusting feed composition and synthesis conditions.Characterizations show that Fe ZSM-22 zeolite synthesized with OSDA-free owns high crystallinity,obvious thin needle-shaped morphology and high Bronsted/Lewis acid ratio.Significantly,when used for n-octane hydroisomerization reaction,its derived catalyst exhibits the best catalytic performance reflected by the highest selectivity to C_(8)isomers compared to the two reference catalysts prepared based on a Fe-containing and a Fe-free ZSM-22 synthesized through an OSDA-directed route from natural diatomite and conventional chemicals,respectively.This work provides an alternative route to sustainably synthesizing heteroatomic zeolites with high performance.

High-silica faujasite zeolite-tailored metal encapsulation for the low-temperature production of pentanoic biofuels

Zeolite-encapsulated metal nanoclusters are at the heart of bifunctional catalysts,which hold great potential for petrochemical conversion and the emerging sustainable biorefineries.Nevertheless,efficient encapsulation of metal nanoclusters into a high-silica zeolite Y in particular with good structural integrity still remains a significant challenge.Herein,we have constructed Ru nanoclusters(~1 nm)encapsulated inside a high-silica zeolite Y(SY)with a SiO_(2)/Al_(2)O_(3) ratio(SAR)of 10 via a cooperative strategy for direct zeolite synthesis and a consecutive impregnation for metal encapsulation.Compared with the benchmark Ru/H-USY and other analogues,the as-prepared Ru/H-SY markedly boosts the yields of pentanoic biofuels and stability in the direct hydrodeoxygenation of biomass-derived levulinate even at a mild temperature of 180℃,which are attributed to the notable stabilization of transition states by the enhanced acid accessibility and properly sized constraints of zeolite cavities owing to the good structural integrity.

Facile synthesis of hierarchical NaX zeolite from natural kaolinite for efficient Knoevenagel condensation

Zeolite catalysts have found extensive applications in the synthesis of various fine chemicals.However,the micropores of zeolites impose diffusion limitations on bulky molecules,greatly reducing the catalytic efficiency.Herein,we explore an economic and environmentally friendly method for synthesizing hierarchical NaX zeolite that exhibits improved catalytic performance in the Knoevenagel condensation reaction for producing the useful fine chemical 2-cyano-3-phenylacrylate.The synthesis was achieved via a low-temperature activation of kaolinite and subsequent in-situ transformation strategy without any template or seed.Systematic characterizations reveal that the synthesized NaX zeolite has both intercrystalline and intra-crystalline mesopores,smaller crystal size,and larger external specific surface area compared to commercial NaX zeolite.Detailed mechanism investigations show that the inter-crystalline mesopores are generated by stacking smaller crystals formed from in-situ crystallization of the depolymerized kaolinite,and the intra-crystalline mesopores are inherited from the pores in the depolymerized kaolinite.This synthesis strategy provides an energy-saving and effective way to construct hierarchical zeolites,which may gain wide applications in fine chemical manufacturing.

Unveiling the tailorable electrochemical properties of zeolitic imidazolate framework-derived Ni-doped LiCoO_(2) for lithium-ion batteries in half/full cells

As a prevailing cathode material of lithium-ion batteries(LIBs),LiCoO_(2)(LCO)still encounters the tricky problems of structural collapse,whose morphological engineering and cation doping are crucial for surmounting the mechanical strains and alleviating phase degradation upon cycling.Hereinafter,we propose a strategy using a zeolitic imidazolate framework(ZIF)as the self-sacrificing template to directionally prepare a series of LiNi_(0.1)Co_(0.9)O_(2)(LNCO)with tailorable electrochemical properties.The rational selection of sintering temperature imparts the superiority of the resultant products in lithium storage,during which the sample prepared at 700℃(LNCO-700)outperforms its counterparts in cyclability(156.8 mA h g^(-1)at 1 C for 200 cycles in half cells,1 C=275 mA g^(-1))and rate capability due to the expedited ion/electron transport and the strengthen mechanical robustness.The feasibility of proper Ni doping is also divulged by half/full cell tests and theoretical study,during which LNCO-700(167 mA h g^(-1)at 1 C for 100 cycles in full cells)surpasses LCO-700 in battery performance due to the mitigated phase deterioration,stabilized layered structu re,ameliorated electro nic co nductivity,a nd exalted lithium sto rage activity.This work systematically unveils tailorable electrochemical behaviors of LNCO to better direct their practical application.

Evaluation of zeolites synthesized from fly ash as potential adsorbents for wastewater containing heavy metals

The pure-form zeolites （A and X） were synthesized by applying a two-stage method during hydrothermal treatment of fly ash prepared initial Cu and Zn gel. The difference of adsorption capacity of both synthesized zeolits was assessed using Cu and Zn as target heavy metal ions. It was found that adsorption capacity of zeolite A showed much higher value than that of zeolite X. Thus, attention was focused on investigating the removal performance of heavy metal ions in aqueous solution on zeolite A, comparing with zeolite HS （hydroxyl-solidate） prepared from the residual fly ash （after synthesis of pure-form zeolite A from fly ash） and a commercial grade zeolite A. Batch method was used to study the influential parameters of the adsorption process. The equilibrium data were well fitted by the Langmuir model. The removal mechanism of metal ions followed adsorption and ion exchange processes. Attempts were also made to recover heavy metal ions and regenerate adsorbents.

Dimethyl ether carbonylation over zeolites

Syngas to ethanol, consisting of dimethyl ether(DME) carbonylation to methyl acetate(MA) over zeolites and MA hydrogenation to ethanol on copper catalyst, has been developed in recent years.DME carbonylation over zeolites, a key step in this new process, has attracted increasing attention due to the high reaction efficiency and promising industrial application.In recent years, continuous efforts have been made on improving the activity and stability of the zeolites.From a mechanistic point of view, DME carbonylation to MA, involving the formation of C–C bond, is achieved via the Koch-type CO insertion into DME within the 8-member ring(8-MR) pores of zeolites, typically HMOR and HZSM-35.The unique geometric configuration of the 8-MR pore endowed the formation of the key intermediate(acetyl, CH3CO^*), possibly by a spatial confinement of the transition state during CO insertion into the surface O–CH3 group.This review article summarizes the main progress on zeolite-catalyzed DME carbonylation, including reaction kinetics and mechanism, theoretical calculations, and experimental strategies developed for populating acid sites and engineering pore structure of the zeolites in order to enhance the overall performance.

Aromatization over nanosized Ga-containing ZSM-5 zeolites prepared by different methods:Effect of acidity of active Ga species on the catalytic performance

Nanosized Ga-containing ZSM-5 zeolites were prepared via isomorphous substitution and impregnation followed by characterized using various techniques. The catalytic performance of the zeolites for the aromatization of 1-hexene was investigated. The results indicate that isomorphous substitution promotes the incorporation of Ga heteroatoms into the framework along with the formation of extra-framework GaO;species（[GaO;]a） that have stronger interactions with the negative potential of the framework. In addition, based on the Py-IR results and catalytic performance, the [GaO;]aspecies with stronger Lewis acid sites produced a better synergism with moderate Br?nsted acid sites and thus improved the selectivity to aromatic compounds. However, the impregnation results in the formation of Ga;O;phase and small amounts of GaO;species that are mainly located on the external surface（[GaO;];）, which contribute to weaker Lewis acid sites due to weaker interactions with the zeolite framework. During 1-hexene aromatization, the nanosized Ga isomorphously substituted ZSM-5 zeolite samples（Gax-NZ5） exhibited better catalytic performance compared to the impregnated samples, and the highest aromatic yield（i.e.,65.4 wt%） was achieved over the Ga4.2-NZ5 sample, which contained with the highest Ga content.

Insight into the topology effect on the diffusion of ethene and propene in zeolites: A molecular dynamics simulation study

Selectivity control is a difficult scientific and industrial challenge in methanol-to-olefins(MTO)conversion.It has been experimentally established that the topology of zeolite catalysts influenced the distribution of products.Besides the topology effect on reaction kinetics,the topology influences the diffusion of reactants and products in catalysts as well.In this work,by using COMPASS force-field molecular dynamics method,we investigated the intracrystalline diffusion of ethene and propene in four different zeolites,CHA,MFI,BEA and FAU,at different temperatures.The self-diffusion coefficients and diffusion activation barriers were calculated.A strong restriction on the diffusion of propene in CHA was observed because the self-diffusion coefficient ratio of ethene to propene is larger than 18 and the diffusion activation barrier of propene is more than 20 kJ/mol in CHA.This ratio decreases with the increase of temperature in the four investigated zeolites.The shape selectivity on products from diffusion perspective can provide some implications on the understanding of the selectivity difference between HSAPO-34 and HZSM-5 catalysts for the MTO conversion.

Diffusion and Adsorption of Benzene and Propylene in MFI,MWW and BEA Zeolites:Molecular Dynamics and Grand Canonical Monte Carlo Simulations

The diffusion and adsorption behaviors of benzene and propylene in zeolites MFI, MWW and BEA have been studied by molecular dynamics（MD） and grand canonical Monte Carlo（GCMC） simulations. The diffusion coefficients of benzene and propylene in MFI, MWW and BEA zeolites were calculated by simulating the mean-square displacements（MSD） at 298 and 600 K. Benzene and propylene showed the different adsorption rules in the channels of the three zeolites. For propylene, the molecular loadings decreased in the order： BEA（linear channel）〉BEA （tortuous channel）〉MFI（linear channel）〉MWW（12-membered rings, 12MR channel）〉MFI（tortuous channel）〉MWW （10-membered rings, 10MR channel）; for benzene, the molecular loadings decreased in the order： BEA（linear chan-nel）〉BEA（tortuous channel）〉MWW（12MR channel）〉MFI（linear channel）〉MFI（tortuous channel）〉MWW（10MR channel）. Besides, the adsorption isotherms of benzene and propylene in the three zeolites at 298 and 443 K were simulated. The results show that the different factors influenced the molecular adsorption at various temperatures and pressures, leading to the different rules for the adsorption of benzene and propylene molecules in the zeolites. At a low pressure, the unfavorable energy would make the loadings of propylene lower than those of benzene. When pressure was higher than 0.25 kPa, the adsorption of benzene in MFI would nearly reach saturation.

Catalytic Performance of MFI/MFI Core-Shell Zeolites in Benzene Methylation

Thanks to its 10-membered-ring structure with a three-dimensional uniform pore system and acid distribution, ZSM-5 zeolite is a key catalytic material for benzene methylation with methanol. After epitaxial inter-growth of a dense layer of shell consisting of nano-particles on the conventional ZSM-5 crystal surface, the MFI/MFI core-shell zeolite not only has much more active surface area, but also can enrich the diffusion and reaction pore system at the same time, which can significantly improve its catalytic performance. In contrast to the performance of conventional ZSM-5 catalyst, an indepth investigation on the reaction parameters of benzene methylation over the core-shell structured zeolite is of great significance.