Dam-break Modeling in Alpine Valleys

Dam-break analysis is of great importance in mountain environment,especially where reservoirs are located upstream of densely populated areas and hydraulic hazard should be assessed for land planning purposes.Accordingly,there is a need to identify suitable operative tools which may differ from the ones used in flat flood-prone areas.This paper shows the results provided by a 1D and a 2D model based on the Shallow Water Equations(SWE) for dam-break wave propagation in alpine regions.The 1D model takes advantage of a topographic toolkit that includes an algorithm for pre-processing the Digital Elevation Model(DEM) and of a novel criterion for the automatic cross-section space refinement.The 2D model is FLO-2D,a commercial software widely used for flood routing in mountain areas.In order to verify the predictive effectiveness of these numerical models,the test case of the Cancano dam-break has been recovered from the historical study of De Marchi(1945),which provides a unique laboratory data set concerning the consequences of the potential collapse of the former Cancano dam(Northern Italy).The measured discharge hydrograph at the dam also provides the data to test a simplified method recently proposed for the characterization of the hydrograph following a sudden dam-break.

Research on Spatial Distribution of Settlements in the Upper Reaches of the Minjiang River

Under the background of the uplift of the Qinghai-Tibet Plateau, the settlements in the upper reaches of the Min River are significantly affected by the mountain environment, and their spatial distribution is typical and representative. In this study, the relationship between settlements and topography, rivers and transportation, and the spatial distribution patterns of settlements, such as the aggregation and orientation characteristics of settlements, have been studied. The main conclusions include: 1) The settlement density decreases with the increase of elevation, slope, and distance from rivers and roads;76.25% and 63.17% of the settlements are distributed in the range of elevation 1500 - 3000 m and slope 6° - 25°, the upper reaches of the Min River are mostly alpine valley terrain, the bottom of the river has a low altitude, the landscape is undulating. The warm and humid climate is suitable for farming, conducive to agricultural production, and an ideal living environment for mountain residents. 2) The nuclear density of the settlement is distributed in strips along the axis of the river, and the closer to the river, the greater the nuclear density value. 3) Mathematical statistical methods were applied for the first time to realize the quantitative expression of the coupling of settlement and river direction. The influence of topographic conditions in different watersheds on the coupling degree of settlement extension and river flow direction was revealed. The slope of the fitted straight line between the settlement and river direction was 0.897, and the two directions were consistent. Except for the mainstream of the Min River, the larger values of the standard deviation ellipse flattening of settlements in each basin appeared in the upper reaches of the bay, and the overall trend showed a gradual decrease from the upstream to the downstream, which was consistent with the topographic change characteristics of the basin.

On the criteria to create a susceptibility map to debris flow at a regional scale using Flow-R

Studies on susceptibility to debris flows at regional scale （ioo-looo km2） are important for the protection and management of mountain areas. To reach this objective, routing models, mainly based on land topography, can be used to predict susceptible areas rapidly while necessitating few input data. In this research, Flow-R model is implemented to create the susceptibility map for the debris flow of the Vizze Valley （BZ, North-Eastern Italy; 134 km^2）. The analysis considers the model application at local scale for three sub-catchments and then it explores the model upsealing at the regional scale by verifying two methods to generate the source areas of debris-flow initiation. Using data of an extreme event occurred in the Vizze Valley （4 August 2012） and historical information, the modeling verification highlights that the propagation parameters are relatively simple to set in order to obtain correct runout distances. A double DTM filtering - using a threshold for the upslope contributing area （0.1 km^2） and a threshold for the terrain-slope angle （15°） provides a satisfactory prediction of source areas and susceptibility map within the geological conditions of the Vizze Valley.