A modified alternating direction implicit algorithm is proposed to solve the full-vectorial finite-difference beam propagation method formulation based on H fields. The cross-coupling terms are neglected in the first ...A modified alternating direction implicit algorithm is proposed to solve the full-vectorial finite-difference beam propagation method formulation based on H fields. The cross-coupling terms are neglected in the first sub-step, but evaluated and doubly used in the second sub-step. The order of two sub-steps is reversed for each transverse magnetic field component so that the cross-coupling terms are always expressed in implicit form, thus the calculation is very efficient and stable. Moreover, an improved six-point finite-difference scheme with high accuracy independent of specific structures of waveguide is also constructed to approximate the cross-coupling terms along the transverse directions. The imaginary-distance procedure is used to assess the validity and utility of the present method. The field patterns and the normalized propagation constants of the fundamental mode for a buried rectangular waveguide and a rib waveguide are presented. Solutions are in excellent agreement with the benchmark results from the modal transverse resonance method.展开更多
In this paper, a novel approach is introduced towards an efficient Finite-Difference Time-Domain (FDTD) algorithm by incorporating the Alternating Direction Implicit (ADI) technique to the Nonorthogonal FDTD (NFDTD) m...In this paper, a novel approach is introduced towards an efficient Finite-Difference Time-Domain (FDTD) algorithm by incorporating the Alternating Direction Implicit (ADI) technique to the Nonorthogonal FDTD (NFDTD) method. This scheme can be regarded as an extension of the conventional ADI-FDTD scheme into a generalized curvilinear coordinate system. The improvement on accuracy and the numerical efficiency of the ADI-NFDTD over the conventional nonorthogonal and the ADI-FDTD algorithms is carried out by numerical experiments. The application in the modelling of the Electromagnetic Bandgap (EBG) structure has further demonstrated the advantage of the proposed method.展开更多
Thermostamping of thermoplastic matrix composites is a process where a preheated blank is rapidly shaped in a cold matching mould. Predictive modelling of the main physical phenomena occurring in this process requires...Thermostamping of thermoplastic matrix composites is a process where a preheated blank is rapidly shaped in a cold matching mould. Predictive modelling of the main physical phenomena occurring in this process requires an accurate prediction of the temperature field. In this paper, a numerical method is proposed to simulate this heat transfer. The initial three-dimensional heat equation is handled using an additive decomposition, a thin shell assumption, and an operator splitting strategy. An adapted resolution algorithm is then presented. It results in an alternate direction implicit decomposition: the problem is solved successively as a 2D surface problem and several one-dimensional through thickness problems. The strategy was fully validated versus a 3D calculation on a simple test case and the proposed strategy is shown to enable a tremendous calculation speed up. The limits of applicability of this method are investigated with two parametric studies, one on the thickness to width ratio and the other one on the effect of curvature. These conditions are usually fulfilled in industrial cases. Finally, even though the method was developed under linear assumption (constant material properties), the strategy validity is extended to multiply, temperature dependant (nonlinear) case using an industrial test case. Because of the standard methods involved, the proposed ADI method can readily be implemented in existing software.展开更多
针对COB-LED(Chip on Board-Light Emitting Diode)散热问题,文中基于二维热传导方程建立了一个可快速计算COB-LED散热器表面热分布的数学模型。为了便于模型求解,采用有限差分法求解该数学模型并选择交替方向隐格式作为其差分格式。根...针对COB-LED(Chip on Board-Light Emitting Diode)散热问题,文中基于二维热传导方程建立了一个可快速计算COB-LED散热器表面热分布的数学模型。为了便于模型求解,采用有限差分法求解该数学模型并选择交替方向隐格式作为其差分格式。根据模型中的边界条件和初始条件设计COB-LED常温点亮实验,并基于ANSYS有限元分析软件进行仿真分析。通过比较求解结果、仿真结果和实验结果验证该数学模型的合理性。结果表明,求解结果与实验结果中最高温度相对误差约23.57%,且两者的温度变化趋势一致。求解结果与仿真结果中最高温度相对误差约34.84%,且温度分布较为接近,证明了该数学模型的合理性与正确性。展开更多
文摘A modified alternating direction implicit algorithm is proposed to solve the full-vectorial finite-difference beam propagation method formulation based on H fields. The cross-coupling terms are neglected in the first sub-step, but evaluated and doubly used in the second sub-step. The order of two sub-steps is reversed for each transverse magnetic field component so that the cross-coupling terms are always expressed in implicit form, thus the calculation is very efficient and stable. Moreover, an improved six-point finite-difference scheme with high accuracy independent of specific structures of waveguide is also constructed to approximate the cross-coupling terms along the transverse directions. The imaginary-distance procedure is used to assess the validity and utility of the present method. The field patterns and the normalized propagation constants of the fundamental mode for a buried rectangular waveguide and a rib waveguide are presented. Solutions are in excellent agreement with the benchmark results from the modal transverse resonance method.
文摘In this paper, a novel approach is introduced towards an efficient Finite-Difference Time-Domain (FDTD) algorithm by incorporating the Alternating Direction Implicit (ADI) technique to the Nonorthogonal FDTD (NFDTD) method. This scheme can be regarded as an extension of the conventional ADI-FDTD scheme into a generalized curvilinear coordinate system. The improvement on accuracy and the numerical efficiency of the ADI-NFDTD over the conventional nonorthogonal and the ADI-FDTD algorithms is carried out by numerical experiments. The application in the modelling of the Electromagnetic Bandgap (EBG) structure has further demonstrated the advantage of the proposed method.
文摘Thermostamping of thermoplastic matrix composites is a process where a preheated blank is rapidly shaped in a cold matching mould. Predictive modelling of the main physical phenomena occurring in this process requires an accurate prediction of the temperature field. In this paper, a numerical method is proposed to simulate this heat transfer. The initial three-dimensional heat equation is handled using an additive decomposition, a thin shell assumption, and an operator splitting strategy. An adapted resolution algorithm is then presented. It results in an alternate direction implicit decomposition: the problem is solved successively as a 2D surface problem and several one-dimensional through thickness problems. The strategy was fully validated versus a 3D calculation on a simple test case and the proposed strategy is shown to enable a tremendous calculation speed up. The limits of applicability of this method are investigated with two parametric studies, one on the thickness to width ratio and the other one on the effect of curvature. These conditions are usually fulfilled in industrial cases. Finally, even though the method was developed under linear assumption (constant material properties), the strategy validity is extended to multiply, temperature dependant (nonlinear) case using an industrial test case. Because of the standard methods involved, the proposed ADI method can readily be implemented in existing software.
文摘针对COB-LED(Chip on Board-Light Emitting Diode)散热问题,文中基于二维热传导方程建立了一个可快速计算COB-LED散热器表面热分布的数学模型。为了便于模型求解,采用有限差分法求解该数学模型并选择交替方向隐格式作为其差分格式。根据模型中的边界条件和初始条件设计COB-LED常温点亮实验,并基于ANSYS有限元分析软件进行仿真分析。通过比较求解结果、仿真结果和实验结果验证该数学模型的合理性。结果表明,求解结果与实验结果中最高温度相对误差约23.57%,且两者的温度变化趋势一致。求解结果与仿真结果中最高温度相对误差约34.84%,且温度分布较为接近,证明了该数学模型的合理性与正确性。
