The stresses around bubbles formed on a coating/substrate interface under hydrostatic pressure(HP)and alternating hydrostatic pressure(AHP)were calculated using the finite element method.The results reveal that HP pro...The stresses around bubbles formed on a coating/substrate interface under hydrostatic pressure(HP)and alternating hydrostatic pressure(AHP)were calculated using the finite element method.The results reveal that HP promotes coating failure but does not mechanically destroy the interface,whereas AHP can provide tensile stress on bubbles formed at the interface and accelerate disbonding of the coating.Because of water resistance,a lag time exists for the coating that serves in an AHP environment.The coating can have a better protective performance if the lag time suits the AHP to minimize the impact of the AHP on the interface.展开更多
To realize a rapid evaluation of coating degradation under alternating hydrostatic pressure(AHP),appropriate physical models of electrochemical impedance spectroscopy(EIS)data fitting were respectively developed for e...To realize a rapid evaluation of coating degradation under alternating hydrostatic pressure(AHP),appropriate physical models of electrochemical impedance spectroscopy(EIS)data fitting were respectively developed for epoxy coatings with and without pigments,based on their different water absorption behaviours.Power-law model was selected to evaluate the anti-permeability of epoxy varnish(EV)coating,which tends to form through pores in the coating structure.On the other hand,two-layer model based on Young theory was developed to evaluate the anti-permeability of pigmented epoxy coating.Consequently,the resistivity profile with coating thickness was calculated as a critical parameter to describe the anti-permeability of coating at different immersion time.The interpretation of water diffusion dynamics based on different coating structures was also given,which is responsible for the choice of distribution models.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.51871049 and 51622106)the National Key R&D Program of China(No.2017YFB0702303)Aclass pilot of the Chinese Academy of Sciences(No.XDA22010303)。
文摘The stresses around bubbles formed on a coating/substrate interface under hydrostatic pressure(HP)and alternating hydrostatic pressure(AHP)were calculated using the finite element method.The results reveal that HP promotes coating failure but does not mechanically destroy the interface,whereas AHP can provide tensile stress on bubbles formed at the interface and accelerate disbonding of the coating.Because of water resistance,a lag time exists for the coating that serves in an AHP environment.The coating can have a better protective performance if the lag time suits the AHP to minimize the impact of the AHP on the interface.
基金financially supported by the National Natural Science Foundation of China(No.51622106 and 51901040)the Fundamental Research Funds for the Central Universities(No.N170203005 and N170212021)the China Postdoctoral Science Foundation(No.2018M640256)。
文摘To realize a rapid evaluation of coating degradation under alternating hydrostatic pressure(AHP),appropriate physical models of electrochemical impedance spectroscopy(EIS)data fitting were respectively developed for epoxy coatings with and without pigments,based on their different water absorption behaviours.Power-law model was selected to evaluate the anti-permeability of epoxy varnish(EV)coating,which tends to form through pores in the coating structure.On the other hand,two-layer model based on Young theory was developed to evaluate the anti-permeability of pigmented epoxy coating.Consequently,the resistivity profile with coating thickness was calculated as a critical parameter to describe the anti-permeability of coating at different immersion time.The interpretation of water diffusion dynamics based on different coating structures was also given,which is responsible for the choice of distribution models.
