Late Quaternary Tectonic Deformation of the Eastern End of the Altyn Tagh Fault

The Quaternary activity of the faults at the eastern end of the Altyn Tagh fault, including the Dengdengshan-Chijiaciwo, Kuantanshan and Heishan faults, was studied on the basis of interpretation of satellite images, trenching, geomorphologic offset measurements and dating. The Altyn Tagh fault has extended eastwards to Kuantanshan Mountain. The left-slip rates of the Altyn Tagh fault decreased through the Qilianshan fault and were transformed into thrust and folds deformation of many NW-trending faults within the Jiuxi basin. Meanwhile, under NE-directed compression of the Tibetan plateau, thrust dominated the Dengdengshan-Chijiaciwo fault northeast of the Kuantanshan uplift with a rate lower than that of every fault in the Jiuxi basin south of the uplift, implying that tectonic deformation is mainly confined to the plateau interior and the Hexi Corridor area. From continual northeastward enlargement of the Altyn Tagh fault, the Kuantanshan uplift became a triangular wedge intruding to the east, while the Kuantanshan area at the end of this wedge rose up strongly. In future, the Altyn Tagh fault will continue to spread eastward along the Heishan and Jintananshan faults. The results have implications for understanding the propagation of crustal deformation and the mechanism of the India-Eurasian collision.

Timing,Displacement and Growth Pattern of the Altyn Tagh Fault:A Review

The Altyn Tagh Fault（ATF） is the longest, lithospheric scale and strike-slip fault in East Asia. In the last three decades, multidisciplinary studies focusing on the timing, displacement of strikeslip and growth mechanics of the ATF have made great progresses. Most studies revealed that the ATF is a sinistral strike-slip and thrust fault, which underwent multiple episodes of activation. The fault is oriented NEE with a length of 1600 km, but the direction, timing of activity and magnitude of its extension eastward are still unclear. The AFT was predominately active during the Mesozoic and Cenozoic, in relation to the Mesozoic collision of the Cimmerian continent（Qiangtang and Lhasa block） and Cenozoic collision of India with Asia. The AFT strike-slipped with a left-lateral displacement of ca. 400 km during the Cenozoic and the displacement were bigger in the western segment and stronger in the early stage of fault activation. The slip-rates in the Quaternary were bigger in the middle segment than in the western and eastern segment. We roughly estimated the Mesozoic displacement as ca. 150-300 km. The latest paleomagnetic data showed that the clockwise vertical-axis rotation did not take place in the huge basins（the Tarim and Qaidam） at both side of ATF during the Cenozoic, but the rotation happened in the small basins along the ATF. This rotation may play an important role on accommodating the tectonic deformation and displacement of the ATF. Even if we have achieved consensus for many issues related to the ATF, some issues still need to be study deeply; such as：（a） the temporal and spatial coupling relationship between the collision of Cimmerian continent with Asia and the history of AFT in the Mesozoic and（b） the tectonic deformation history which records by the sediments of the basins within and at both side of AFT and was constrained by a high-resolution and accurate chronology such as magnetostratigraphy and paleomagnetic data.

The First Quantitative Slip-Rate Estimated Along the Ashikule Fault at the Western Segment of the Altyn Tagh Fault System

As one of the longest strike-slip fault in Asia,the Altyn Tagh Fault（ATF）defines the northern boundary of the Tibetan Plateau and plays a significant role inaccommodating the deformation resulting from the IndiaAsia convergence.

Deformation at the Easternmost Altyn Tagh Fault: Constraints on the Growth of the Northern Qinghai–Tibetan Plateau

How the Altyn Tagh fault(ATF) extends eastwards is one of the key questions in the study of the growth of the Qinghai–Tibetan Plateau. Detailed fieldwork at the easternmost part of the ATF shows that the ATF extends eastward and bypasses the Kuantan Mountain;it does not stop at the Kuantan Mountain, but connects with the northern Heishan fault in the east. The ATF does not enter the Alxa Block but extends eastward along the southern Alxa Block to the Jintanan Mountain. The Heishan fault is not a thrust fault but a sinistral strike-slip fault with a component of thrusting and is a part of the ATF. Further to the east, the Heishan fault may connect with the Jintananshan fault. A typical strike-slip duplex develops in the easternmost part of the ATF. The cut and deformed Quaternary sediments and displaced present gullies along the easternmost ATF indicate that it is an active fault. The local highest Mountain(i.e., the Kuantan Mountain) in the region forms in a restraining bend of the ATF due to the thrusting and uplifting. The northward growth of the Qinghai–Tibetan Plateau and the active deformation in South Mongolia are realized by sinistral strike-slipping on a series of NE–SW-trending faults and thrusting in restraining bends along the strike-slip faults with the northeastward motion of blocks between these faults.

Geochemistry, Zircon U–Pb Dating and Hf Isotopic Characteristics of Neoproterozoic Granitoids in the Yaganbuyang Area, Altyn Tagh, NW China

The South Altyn continental block is an important geological unit of the Altyn Tagh orogenic belt, in which numerous Neoproterozoic granitoids crop out. Granitoids are mainly located in the Paxialayidang-Yaganbuyang area and can provide indispensable information on the dynamics of Rodinia supercontinent aggregation during the Neoproterozoic. Therefore, the study of granitoids can help us understand the formation and evolutionary history of the Altyn Tagh orogenic belt. In this work, we investigated the Yaganbuyang granitic pluton through petrography, geochemistry, zircon U-Pb chronology, and Hf isotope approaches. We obtained the following conclusions： （1） Yaganbuyang granitoids mainly consist of two-mica granite and granodiorite. Geochemical data suggested that these granitoids are peraluminous calc-alkaline or high-K calc-alkaline granite types. Zircon U-Pb data yielded ages of 939~7.1 Ma for granodiorite and ~954 Ma for granitoids, respectively. （2） The ~Hf（t） values of two--mica granite and granodiorite are in the range of-3.93 to ＋5.30 and -8.64 to ＋5.19, respectively. The Hf model ages （TDM2） of two-mica granite and granodiorite range from 1.59-.05 Ga and 1.62-2.35 Ga, respectively, indicating that the parental magma of these materials is derived from ancient crust with a portion of juvenUe crust. （3） Granitoids formed in a collisional orogen setting, which may be a response to Rodinia supercontinent convergence during the Neoproterozoic.

The Tashisayi nephrite deposit from South Altyn Tagh, Xinjiang,northwest China

The Tashisayi nephrite deposit is located in South Altyn Tagh.in Qiemo County,Xinjiang Province,northwest China.It is a recent discovery in the vast,well-known Kunlun-Altyn nephrite belt distributed along the south of the Tarim Basin,producing more than half of the nephrite from the whole belt in 2017.Field investigations revealed that it is a dolomitic marble-related(D-type)nephrite deposit,but little is known about its age of formation and relationships between the granites and marble.Here we report field investigations,petrography of the neph rite,as well as petrography,geochemistry,geochronology of the zoisite-quartz altered intrusive rock and adjacent granites.An A-type granite is identified with a SHRIMP U-Pb zircon age of 926±7 Ma,suggesting it was emplaced in an extensional tectonic environment at that time.The altered intrusive rock has a cluster of U-Pb zircon age of 433±10 Ma.with similar trace element features to the A-type granite,suggesting it was formed in an extensional regime at this later time.Nephrite formed because of the metasomatism of dolomite marble by hydrothermal fluids.It is inferred that Ca^2+was released from the dolomitic marble by metasomatism forming Ca-rich fluids,which caused alteration of both the intrusive rocks(6.00-8.22 wt.%CaO)and granite(1.76-3.68 wt.%CaO)near the nephrite ore bodies.It is also inferred that Fe^2+from the granite migrated towards the dolomite marble.The fluids gave rise to the formation of Ca-minerals.such as zoisite,in the nephrite and altered intrusive rock,and epidote in the granite.Based on the contact relationships.similarity in hydrothermal processes,and consumption of Ca^2+,the Tashisayi nephrite is considered to have formed at the same time as the alteration of the intrusive rocks,i.e.~433 Ma.The geochronological similarity(~926 Ma.433 Ma)of South Altyn and North Qaidam may suggest that tectonically they belong to one single complex in the past,which was offset by the Altyn Tagh fault(ATF).The similar formation ages of the nephrites from Altyn Tagh(433 Ma)and the previously studied areas of West Kunlun(378-441 Ma)and East Kunlun(416 Ma)indicate that these nephrites formed during the closure of Proto-Tethys and in the accompanving post-collisional.extensional environment.

NORMAL-SLIP ALONG THE NORTHERN ALTYN TAGH FAULT, NORTH TIBET

The east\|west striking Northern Altyn Tagh Fault, about 240km long between Bashkaogong (90°E, 39°25′N) and Lapeiquan (92°15′E, 39°25′N), was previously mapped as a north\|dipping thrust, juxtaposing late Archean\|Mesoproterozoic gneisses in the hanging wall over Paleozoic volcanics, plutons, turbidite, and melange complexes in the footwall. In order to estimate the total magnitude of slip along the Cenozoic Altyn Tagh fault, we conducted geologic mapping along four traverses across the Jinyan Shan where the fault lies. Our field observations suggest that the fault is south\|dipping, with dip angles varying from <25° in the east to about 40° in the west. The eastern fault zone exhibits mylonitic fabrics, whereas the western fault zone is characterized by cataclastic deformation. Kinematic indicators in the ductily deformed mylonitic shear zone consistently show a top\|to\|the\|south sense of shear, suggesting that the Northern Altyn Tagh fault is a south\|dipping normal fault, not a north\|dipping thrust.. The ductile shear zone is typically 30～40m thick, consisting of highly sheared metasediments (pelite and marble), granites, and granitic veins.The latter are systematically cut by small\|scale, south\|dipping ductile normal faults with displacements between 10s of cm to several meters, forming spectacular asymmetric boudinages in the sheared meta\|pelite matrix.The minimum displacement along the detachment is about 20km, as measured by the north\|south width of the exposed footwall gneisses. We renamed the Northern Altyn Tagh Fault in the Jinyan Shan region as the Lapeiquan detachment fault to avoid confusion with other east\|west trending Cenozoic faults to the west along the northern edge of the Altyn Tagh range (e.g., the Cenozoic Jianglisai fault near Qiemo), collectively known as the Northern Altyn Tagh fault system (see Cowgill et al., Geology,in press). The lower age bound of the Lapeiquan fault is Ordovician, as the fault cuts Ordovician volcanics and plutons in its hanging wall. As the Ordovician volcanic rocks are folded together with Carboniferous marbles and Jurassic sedimentary strata, it is likely that normal faulting along the Lapeiquan detachment postdates the Jurassic. The Lapeiquan detachment fault is covered by Quaternary sediments of the Tarim basin in the west, and is apparently truncated by the Cenozoic left\|slip Altyn Tagh fault to the east as indicated by regional geologic maps. If true, this relationship implies that the Lapeiquan fault predates the Cenozoic Altyn Tagh fault. The apparent truncational relationship between the Lapeiquan fault and the Altyn Tagh fault posses an important question: where is the counterpart of the Lapeiquan fault south of the Altyn Tagh fault? Preliminary mapping in the Yema Nan Shan south of the Altyn Tagh fault reveals a fragment of a low\|angle mylonitic shear zone, which is interpreted as a detachment fault because it puts lower\|grade meta\|pelite over higher\|grade mylonitic quartzite. The correlation of detachment faults in the Yema Nan Shan and the Lapeiquan area would imply an amount of about 280～300km left slip along the Altyn Tagh fault. Alternatively, movement along the Lapeiquan detachment fault could have been synchronous with the development of the Cenozoic Altyn Tagh fault. This interpretation requires no counterpart of the Lapeiquan fault south of the Altyn Tagh fault. Instead, it implies that a major topographic collapse event occurred in the Cenozoic along the northern edge of the Tibetan plateau during movement along the Altyn Tagh fault. On\|going thermochronologic analysis will provide constraints on the age of the detachment fault and a test for the two distinctive hypotheses.

SEDIMENTARY PROCESS OF THE CENOZOIC BASIN AND ITS RESPONSE TO THE SLIP-HISTORY OF THE ALTYN TAGH FAULT, NW CHINA

The NEE\|striking Altyn Tagh Fault (ATF) has been well known as one major point to know the growth history of the Tibetan plateau. Lots of investigations done since 1970’s were mostly focus on active features, particularly on determining slip, slip rate and their distribution along the fault. However, Cenozoic slip\|history of this fault remains poorly understood, and the age of initiation and total offset are controversial. Several Cenozoic sedimentary basins develop in Suo’erkulinan to Mangya regions (Fig.1). Their sedimentary processes are closely related with the ATF. The studies of the Neogene sedimentary sequences and the reconstruction of the paleo\|geography are essential to establish the displacement history of the fault during Late Cenozoic.Located at the southern side of the ATF, the Suo’erkulinan basin consists of more than 600\|meter\|thick Pliocene Shizigou Formation below and about 120\|meter\|thick Early to Middle Pleistocene Qigequan Formation above according to the 1∶200000 geological map by Xinjiang Province. An obvious erosional surface can be seen on the top of the lower sequence. Sediments in the Shizigou Formation are characterized by 400\|meter\|thick yellow to red cobble\|sized conglomerates in the bottom, up\|grading to sandstones and grey\|green mudstones. This indicated that the sedimentary facies changed from alluvial fan to fluvial fan and sediments became more and more mature. The upper sequence, the Qigequan Formation, corresponds to an alluvial facies series composed of yellow to white cobble\|sized conglomerates intercalated with lenticular sandstones. Paleo\|current indicators showed that the Shizhigou conglomeratic series were sourced from northwest. Well\|developed syn\|sedimentary faults, normal faults mostly inherited from syn\|sedimentary faults, and some striation lineations on the surface indicated transtensional tectonic environment of the strike\|slip faulting.

AGE OF THE ALTYN TAGH STRIKE—SLIP FAULT

A 100～500m\|wide mylonite zone in the Altun Group of Lower Proterozoic age was discovered along the Altyn Tagh strike\|slip fault. The zone is mainly composed of amphibolitic and granitic mylonites. The planar joints of the rocks strike in NE70 and dip steeply (nearly vertical), coincident with the striking of Altyn Tagh fault zone, and their stretched lineations are nearly horizontal. Shear strains are well developed and show sinistral sheared. The amphibolitic and granitic mylonites are most probably the products of deep\|seated melting caused by sinistral strike\|slip shearing as suggested by the evidence below: (1) The migmatization is intensely developed and spatially controlled by the shear zone, and the rock has a set of NNE perspective foliation which is in accord with the direction of the Altyn Tagh strike\|slip fault zone. (2) The recrystallized hornblende aggregate is distributed in band with obvious nebulous texture, indicating the characteristics of anatexis, and the hornblendes are oriented and form the nearly horizontal stretching lineation; some hornblendes have titanite inclusions, and magmatic long\|columnar zircons are in directional arrangement.(3) The banded felsic material is developed, and the plagioclase is characteristic of high\|temperature plastic deformation and shows sinistral shear stain. (4) In mylonites, all the axis C fabric of quartz shows the feature of sinistral shearing and the majority is generally middle to low temperature fabric, but there also exists high temperature fabric, which suggests that high temperature shearing occur in the early stage of strike\|slip deformation and it is characterized by middle to low temperature shearing at the beginning of anatexis or in the late stage of the deformation. (5) On the XZ plane of mylonite and mylonitized rocks, there exists the consistent sinistral shear stain, which suggests the products of the same strike\|slip shearing.Zircons were separated from three samples of mylonitized granitic rocks for age dating. Two groups of zircon were distinguished in morphology: one is elongate prismatic grains, and the other shows slight rounding. Some zoned structure of selected grains were examined by cathodoluminescence. Dating was completed in the SHRIMP laboratory of Stanford University. Fifteen analyses were made on 14 zircon grains. Sample S99\|25 show two obvious two age groups, one is 527～549Ma, and the other is 466～472Ma. Sample S99\|9 contains two age groups either, one is 475～507Ma and the other is 279Ma. Sample S99\|6 shows three groups: ① 528Ma; ② 365Ma and③ 238～243Ma, here the 365Ma is explained as mixture age between the other two age groups according to its exact location in the grain. In summary, from the three samples we found at least three age groups: 507～548Ma; 466～472Ma; 238～243Ma.The ages of 507Ma to 548Ma and 466Ma to 472Ma represent the deformation and metamorphism of Early Paleozoic age, which is most likely correspond to the close of the Qilian Sea and continental subduction and collision reported in recent papers (Yang Jingsui et al., 1998; Zhang Jianxin et al., 1999; Xu Zhiqin et al., 1999). The 238～243Ma most likely represent the formational age of the Altyn Tagh strike\|slip fault, which is consistent with the formational age (200～240Ma) of the large\|scale sinistral strike\|slip fault zone of the South Margin of East Kunlun (Li Haibing et al., 1996), and both can be attributed to the oblique subduction and collision of the Bayan Har terrane with the East Kunlun terrane during Indosinian period.

THE FORMATION AND EVOLUTION OF ALTYN TAGH FAULT SYSTEM AND ITS RELATIONSHIP TO THE GROWTH OF TIBETAN PLATEAU

One of the focus views of the uplifting of Tibetan Plateau is the growth history of the plateau. This is an unresolved question because of the poor study in north margin, where the ATF (Altyn Tagh Fault) is acting an important role in the growth and deformation of the plateau. The fault links two huge contractional belts, e.g. Qilian Nan Shan and West Kunlun, and merges a series of thrusting\|folding arcs in southeast. Mapping of piercing points, such as unconformities between Cenozoic, Mesozoic and Paleozoic strata, and magmatic arcs, shows left slips of ca. 240km and ca. 550km along the middle and western segments of the ATF. About 140～450km of crustal shortening, approximately the same magnitude as the west segment of the ATF, is deduced from balanced sections in West Kunlun foreland thrusting belt. This implies that left\|slip displacement along the west segment of the ATF was absorbed by the contraction in West Kunlun. The ATF system merged bunches of WNW arcuated fold\|fault belts in Qaidam basin, implying anti\|clockwise rotation. Tertiary and some Lower to Middle Pleistocene strata involved in fold\|fault belts, and dip in ESE due to the uplifting of Altyn Tagh. The newest strata involved in the deformation is more and more younger from south to north, that is, from Lower Pliocene to Middle Pleistocene, showing the uplifting trends from south to north in the SE side of the fault.

LARGEST ALTYN TAGH LITHOSPHERIC SHEAR FAULT IN CENTRAL ASIA

The Altyn Tagh fault (ATF) extending in NEE—SWW direction lying at the northwestern boundary of Qinghai—Tibet plateau is the largest strike\|slip fault in Central Asia. On the basis of recent geologic mapping and detailed study of lithotectonic characteristics for the paleotectonic units at the two sides of the Altyn Tagh Fault ( Altun Mt. to west and the Qilian Mt. to east ) we propose that the paleotectonic units in the Altun Mt. can be correlated with those in the Qilian Mt. assuming 400km left\|lateral displacement for the Altyn Tagh fault. Natural seismic data across the Altun Mt. indicate that the Altyn Tagh fault is a lithospheric shear fault and the lithospheric shearing is probably related to southward intracontinental oblique subduction of the Tarim terrane beneath the Altun Mt.1\ Comparison of the major paleotectonic units at the two sides of the Altyn Tagh fault\;(1) The Alxa\|Dunhuang Massif:The Alxa massif lying at the southern margin of the Sino\|Korean craton consists mainly of an Early Proterozoic basement including high\|grade and middle\|grade metamorphic rocks, which were intruded by granite at 1719Ma. The Paleozoic passive margin sediments is well developed. In the Altun Mt., the Early Proterozoic and late Archean basement of the Duhuang massif includes high\|grade and middle\|grade metamorphic rocks dating 2789Ma (Sm\|Nd method) and 2405Ma (U\|Pb method).

THREE-DIMENSIONAL DEFORMATION ALONG THE ALTYN TAGH FAULT ZONE AND UPLIFT OF THE ALTYN MOUNTAIN, NORTHERN TIBET

he convergence between India and Eurasia is partly accommodated by motion of a few large blocks along strike\|slip faults. About 1800km long Altyn Tagh fault strikes in N60～80°E and allows the northeastward displacement of the Tibet plateau relative to the Tarim. The Altyn Tagh fault zone is a typical transpressional fault zone, characterized by blocks rotation and crustal shortening and vertical extrusion of blocks within the Altyn Tagh strike\|slip system. Differences of three\|dimensional deformation and configuration of the active structures are recognized at different segment of the Altyn Tagh fault zone.1\ Structural configuration of the Altyn Tagh fault zone\;In the Altyn Tagh strike\|slip fault zone, the assemblage pattern of the (active) faults is in the form of parallel plumes, especially in the eastern and the western segments of the Altyn Tagh fault zone. These plumes structures in the eastern segment are assembled by string\|like left lateral strike\|slip fault and broom\|like thrusting faults, and in the western segment by arc\|like left lateral strike\|slip faults along with thrusting faults and normal faults. In the middle segment of the Altyn Tagh fault zone, the structures are characterized by the string\|like left lateral strike\|slip faults in the center and reverse thrusting faults on the two sides.

CRETACEOUS (?) VOLCANIC ROCKS ON THE NORTH END OF THE ALTYN TAGH FAULT:CHARACTERISTICS AND TECTONIC IMPLICATIONS

The age and evolutional history of the Altyn Tagh fault and its role in the formation and uplift of the Qinghai—Tibetan plateau have been focused for years. Many geologists believe that the formation of the fault is a result of the collision between India and Asia. Some people thought that it should have formed earlier than Cenozoic but have no critical evidence. Here we report a preliminary result from our recent investigation on the volcanic rocks at the north end of the Altyn Tagh fault.1 The volcanic rocks on the north end of the Altyn Tagh fault The volcanic rocks are located on the north end of the Altyn Tagh fault, northern Qinghai—Tibetan plateau. The investigated volcano occurs in the Jiuxi basin, a Cretaceous and Tertiary depositional basin. It is about 300m×100m in size and form about a 100m high cliff above the folded Cretaceous strata. It likes relic neck of a volcano rather than a kind of widely distributed lava flow commonly seen in the northern Tibet. The country rocks are Cretaceous sandstone, silt and fine\|grained conglomerate. The cliff formed most likely due to the differing erosion between the hard volcanic rocks and soft rocks.

GRANITOIDS,VOLCANIC ROCKS AND CHERTS FROM NORTH ALTYN TAGH,NW CHINA: IMPLICATION FOR THE TECTONIC ENVIRONMENT DISCRIMINATION

Granitoids,volcanic rocks and cherts,mainly of early Paleozoic,in northern Altyn Tagh(Fig.1) are analyzed here for the purpose of the determination of the tectonic environments and their development since Early Paleozoic.(1) Granitoids\ The collection of 128 main\|element petrochemical data from North Altyn Tagh area shows that most of the granitoids here are granites and granodiorites of calc\|alkaline series.They consist mainly of metaluminous and peraluminous in Shand’s index,and only one of them,which belongs to Mesozoic,is peralkaline.Most of the granitoids plot in the IAG+CAG+CCG fields in the Maniar and Piccoli’s diagrams (1989) for tectonic discrimination of granitoids.IAG (Island arc granitoids)and CAG (Continental arc granitoids) can be distinguished for Early and Late Paleozoic granitoids,and maybe some CCG (Continental collision granitoids) for Early Paleozoic.Granitoids of Mesozoic and Cenozoic inherited the characteristics of those of Paleozoic.Destructive active plate margin (pre\|plate collision)and Anatectic magmatism(syn\|orogenic,S\|type granites)are distinguished (Fig.2)for Paleozoic granitoids using de la Roche R 1\| R 2 multicationic diagram (Batchelor and Bowden,1985).Mesozoic and Cenozoic granitoids inherited the characteristics of Anatectic magmatism (syn\|orogenic)of these early ones,and post\|orogenic(A\|type)granites occurred in Mesozoic.The mechanism for magma formation is mainly partial melting.

LARGE-SCALE STRAIN PATTERNS,GREAT EARTHQUAKE BREAKS,AND LATE PLEISTOCENE SLIP-RATE ALONG THE ALTYN TAGH FAULT (CHINA)

Fieldwork along several segments of the Altyn Tagh Fault,between 85 and 95°E,confirms that it ranks as one of the most active faults of Asia.In the East,near Aksay,the active fault trace offsets numerous stream channels,terrace risers and fans tens to hundreds of meters. 14 C dating of organic remains and charcoal within terrace gravels indicates that most of the terraces were emplaced after the beginning of the Holocene,implying a left\|slip rate of about 2cm/a.Large mole tracks attest to the occurrence of great earthquakes.Even larger mole tracks are found north of Lenghu,within the Altun Shan push\|up,a 6000 m high range in a restraining bend of the fault,now sliced by its most active strand.North of Huatougou,at the transition between another push\|up mountain and a recent pull\|apart basin,a spectacular sequence of five flat\|floored,hanging channels,beheaded by the fault from a unique source in the mountain,have been horizontally displaced by up to 1250m.Cosmogenic dating of the abandonment of these channels and of nearby offset terrace risers confirms the slip\|rate at Aksay.Several km to the west,pressure ridges exceeding 10m in height across a large young fan,imply the repeat of several great earthquakes in a relatively short time span.

Reconciliation of the Early Slip History of the Altyn Tagh Fault, Northern Tibetan

Whether the Altyn Tagh fault (ATF) had been extended beyond its current northeastern tip and linked with strike-slip faults in East Asia is a key to understanding the timing and mechanisms of crustal deformation in the northern Tibetan Plateau. We present Late Cretaceous dextral movement affected by Okhotomorsk Block-East Asia collision and a larger sinistral offset since Late Eocene along the ATF based on the provenance analysis of western Jiuxi Basin. Moreover, currently available estimates of offset based on displaced Paleozoic and Jurassic rocks could not represent the maximum offset due to late Cretaceous dextral offset.

Slip Rate on the Altyn Tagh Fault on the West of the Cherchen River (Between 85°～ 85°45′E) Since Late Quaternary

Because of the significance to the formation and evolution of the Tibetan plateau, the displacement and slip rate of the Altyn Tagh fault have been topics full of disputation. Scientists who hold different opinions on the evolution of Tibet insist on different slip rates and displacements of the fault zone. In the article, study is focused on the late Quaternary slip rate of the Altyn Tagh fault west of the Cherchen River (between 85°E and 85°45’E). On the basis of high resolution SPOT images of the region, three sites, namely Koramlik, Aqqan pasture and Dalakuansay, were chosen for field investigation. To calculate the slip rate of the fault, displacement of terraces was measured on SPOT satellite images or in situ during fieldwork and thermo-luminescence (TL) dating method was used. To get the ages of terraces, samples of sand were collected from the uppermost sand beds that lie just under loess. The method for calculating slip rate of fault is to divide the displacement of terrace risers by the age of its neighboring lower terrace. The displacement of rivers is not considered in this article because of its uncertainties. At Koramlik, the slip rate of the Altyn Tagh fault is 11.6±2.6mm/a since 6.02±0.47ka B.P and 9.6±2.6mm/a since 15.76±1.19ka B.P. At Aqqan pasture, about 30km west of Koramlik, the slip rate is 12.1±1.9mm/a since 2.06±0.16 ka B.P. At Dalakuansayi, the slip rate of the fault is 12.2±3.0mm/a since 4.91±0.39ka B.P. Hence, we get the average slip rate of 11.4±2.5mm/a for the western part of the Altyn Tagh Fault since Holocene. This result is close to the latest results from GPS research.

The Rotational Structure along the Eastern Segment of the Altyn Tagh Fault and Its Implications in Dynamics

As a result of the left-lateral strike-slipping of the Altyn Tagh fault in Neotectonic period, a contra-rotational structure, namely the Zhaobishan vortex structure, has developed at the juncture of the main Altyn Tagh fault and the northern fringe fault of the Qilian Mountains. Preliminary analysis on the deformation and evolution of the Zhaobishan vortex structure. In combination with the previous data, suggests that the tectonic transform between the Altyn Tagh fault and the northern fringe fault of the Qilian Mountains attributes to the deformation of the rotational structure. The existence of a series of rotational structures along the Altyn Tagh fault and on the northeastern edge of the Qinghai-Xizang(Tibet) plateau indicate that as the substance in the northern Qinghai-Xizang (Tibet) plateau moves clockwise around the eastern tectonic knot of the Himalayas, rotational structures become the principal mode on the northern marginal zone of the Plateau of transforming and absorbing tectonic deformation.

Slip-Rate on the Middle Altyn Tagh Fault since the Holocene Period

By analyzing high-resolution SPOT images and in combination with fieldwork and chronometry, three typical fault-offset sites on the south-middle Altyn Tagh strike-slip fault were studied to obtain the sinistral horizontal slip rate of the fault. At Annanba, the left-lateral strike-slip rate on a branch of the south Altyn Tagh fault is 7.5±1.7 mm/a since 9.36±0.73ka BP. At Seven Spring, the fault has four branches and the left-lateral strike-slip rate on one of them is 2.3±0.5mm/a since 13.86±1.07ka BP, and it is deduced that the total slip-rate of all the four branches is 6.9±1.5～ 9.2±2.0 mm/a since Holocene. At Yuemakeqi, the left-lateral strike-slip rate of the fault is 10.6±3.0mm/a since 4.73±0.38 ka BP. A slip-rate of 7～11mm/a on the middle segment of the Altyn Tagh fault (between 88°30’E and 93°05’E) since Holocene can be deduced from the three sites mentioned above and the result is similar to the latest GPS observation.

First Discovery of North-South Striking Normal Faults near the Potential Eastern End of Altyn Tagh Fault

The Altyn Tagh fault is the northern boundary of Tibetan Plateau. As one of the most well-known strike-slip fault in the world, great achievements on tectonic deformation and Late Qua- ternary slip rate have been made. However, there is a long-lasting debate on whether the Altyn Tagh fault extends into the Jinta Basin or even eastward. In this paper, we use satellite image interpretation, field investigation, trench excavation, and optical stimulated luminescence dating to study newly found NS striking scarps in the eastern end of Jinta Nan Shan. The results are as follows： firstly, a group of normal faults develop on terrace T2 of Heihe River, the total length amounts to -40 km, total scarp height is 304-5 m; secondly, four paleoseismic events have been interpreted from three trenches, approximate ages of events are 79.97±19.14 ka BP, 62.55±13.10~55.41±10.77 ka BP, before 16.89±2.08 ka BP, 8.52±1.49 ka BP, respectively; thirdly, just like NS normal faults in the western end of Altyn Tagh fault, the newly found NS extensional faults are likely the terminating tectonics of the eastern end of Altyn Tagh fault, the large Altyn Tagh fault may end in the eastern end of Jinta Nan Shan.