The thermal decomposition process of （NH4）3AlF6 was studied by DTA-TGA method and the related thermodynamic data were obtained. The results show that AlF3 is obtained after three-step decomposition reaction of （NH4...The thermal decomposition process of （NH4）3AlF6 was studied by DTA-TGA method and the related thermodynamic data were obtained. The results show that AlF3 is obtained after three-step decomposition reaction of （NH4）3AlF6, and the solid products of the first two decomposition reactions are NH4AlF4 and AlF3（NH4F）0.69, respectively. The three reactions occur at 194.9, 222.5 and 258.4 ℃, respectively. Gibbs free energy changes of pertinent materials at the reaction temperatures were calculated. Enthalpy and entropy changes of the three reactions were analyzed by DSC method. Anhydrous aluminum fluoride was prepared. The XRD analysis and mass loss calculation show that AlF3 with high purity can be obtained by heating （NH4）3AlF6 at 400 ℃ for 3 h.展开更多
This study focuses on the effects of p H and fluoride at different molar ratios of fluoride to Al（R F：Al） on the removal of cadmium（Cd^（2＋）） and phosphate by Al coagulation. Fluoride at R F：Al≥ 3：1 inhibits...This study focuses on the effects of p H and fluoride at different molar ratios of fluoride to Al（R F：Al） on the removal of cadmium（Cd^（2＋）） and phosphate by Al coagulation. Fluoride at R F：Al≥ 3：1 inhibits the removal of Cd over wide Al dose ranges from 5 to 10 mg/L as Al. The removal of phosphate decreases significantly at high R F：Al of 10：1 whereas at lowered R F：Al（i.e., ≤ 6：1）, an adverse effect is observed only at insufficient Al doses below 2 mg/L. Fluoride shows inhibitive effects towards the removal of Cd at p H 7 and 8 and that of phosphate at p H 6. Fluoride decreases the ζ-potential in both systems, and the decreasing extent is positively correlated to the elevated R F：Al. The Al fluoride interactions include the formation of Al-F complexes and the adsorption of fluoride onto Al（OH）3 precipitates, i.e., the formation of Al（OH）n F m. Al-F complex formation inhibits Al hydrolysis and increases residual Al levels, and a more significant increase was observed at lower p H. Al-F complexes at high R F：Al complicate the coagulation behavior of Al towards both negative and positive ionic species. Moreover, fluoride at low R F：Al shows little effect on Al coagulation behavior towards Cd^2＋and phosphate, and the spent defluoridation adsorbent,i.e., aluminum（Al） hydro（oxide） with adsorbed fluoride at R F：Al of below 0.1：1, may be reclaimed as a coagulant after being dissolved.展开更多
Batch experiments were conducted to evaluate fluoride removal by Al,Fe,and Ti-based coagulants and adsorbents,as well as the effects of coexisting ions and formation of aluminum–fluoride complexes on fluoride removal...Batch experiments were conducted to evaluate fluoride removal by Al,Fe,and Ti-based coagulants and adsorbents,as well as the effects of coexisting ions and formation of aluminum–fluoride complexes on fluoride removal by co-precipitation with alum（Al_2（SO_4）_3·18H_2O）.Aluminum sulfate was more efficient than the other coagulants for fluoride removal in the pH range between 6 and 8.Nano-crystalline TiO_2 was more effective for fluoride removal than Al and Fe hydroxides in a pH range of 3–5.Coexisting anions in water decreased the removal of fluoride in the order：phosphate（2.5 mg/L） 〉 arsenate（0.1 mg/L） 〉 bicarbonate（200 mg/L） 〉sulfate（100 mg/L） = nitrate（100 mg/L） 〉 silicate（10 mg/L） at a pH of 6.0.The effect of silicate became more significant at pH 〉 7.0.Calcium and magnesium improved the removal of fluoride.Zeta-potential measurements determined that the adsorption of fluoride shifted the PZC of Al（OH）_3 precipitates from 8.9 to 8.4,indicating the chemical adsorption of fluoride at the surface.The presence of fluoride in solution significantly increased the soluble aluminum concentration at pH 〈 6.5.A Visual MINTEQ modeling study indicated that the increased aluminum solubility was caused by the formation of AlF^（2＋）,AlF^（＋2）,and AlF_3complexes.The AlF_x complexes decreased the removal of fluoride during co-precipitation with aluminum sulfate.展开更多
基金Project(51004034)supported by the National Natural Science Foundation of ChinaProject(N090302009)supported by the Fundamental Research Funds for the Central Universities,China
文摘The thermal decomposition process of （NH4）3AlF6 was studied by DTA-TGA method and the related thermodynamic data were obtained. The results show that AlF3 is obtained after three-step decomposition reaction of （NH4）3AlF6, and the solid products of the first two decomposition reactions are NH4AlF4 and AlF3（NH4F）0.69, respectively. The three reactions occur at 194.9, 222.5 and 258.4 ℃, respectively. Gibbs free energy changes of pertinent materials at the reaction temperatures were calculated. Enthalpy and entropy changes of the three reactions were analyzed by DSC method. Anhydrous aluminum fluoride was prepared. The XRD analysis and mass loss calculation show that AlF3 with high purity can be obtained by heating （NH4）3AlF6 at 400 ℃ for 3 h.
基金supported by the National Natural Science Foundation of China (Nos. 21177143, 21177144)the key project of the National " 863 " High-Tech R&D Program of China (No. 2012AA062604)the support of the Beijing Nova Program (No. 2013054)
文摘This study focuses on the effects of p H and fluoride at different molar ratios of fluoride to Al（R F：Al） on the removal of cadmium（Cd^（2＋）） and phosphate by Al coagulation. Fluoride at R F：Al≥ 3：1 inhibits the removal of Cd over wide Al dose ranges from 5 to 10 mg/L as Al. The removal of phosphate decreases significantly at high R F：Al of 10：1 whereas at lowered R F：Al（i.e., ≤ 6：1）, an adverse effect is observed only at insufficient Al doses below 2 mg/L. Fluoride shows inhibitive effects towards the removal of Cd at p H 7 and 8 and that of phosphate at p H 6. Fluoride decreases the ζ-potential in both systems, and the decreasing extent is positively correlated to the elevated R F：Al. The Al fluoride interactions include the formation of Al-F complexes and the adsorption of fluoride onto Al（OH）3 precipitates, i.e., the formation of Al（OH）n F m. Al-F complex formation inhibits Al hydrolysis and increases residual Al levels, and a more significant increase was observed at lower p H. Al-F complexes at high R F：Al complicate the coagulation behavior of Al towards both negative and positive ionic species. Moreover, fluoride at low R F：Al shows little effect on Al coagulation behavior towards Cd^2＋and phosphate, and the spent defluoridation adsorbent,i.e., aluminum（Al） hydro（oxide） with adsorbed fluoride at R F：Al of below 0.1：1, may be reclaimed as a coagulant after being dissolved.
文摘Batch experiments were conducted to evaluate fluoride removal by Al,Fe,and Ti-based coagulants and adsorbents,as well as the effects of coexisting ions and formation of aluminum–fluoride complexes on fluoride removal by co-precipitation with alum（Al_2（SO_4）_3·18H_2O）.Aluminum sulfate was more efficient than the other coagulants for fluoride removal in the pH range between 6 and 8.Nano-crystalline TiO_2 was more effective for fluoride removal than Al and Fe hydroxides in a pH range of 3–5.Coexisting anions in water decreased the removal of fluoride in the order：phosphate（2.5 mg/L） 〉 arsenate（0.1 mg/L） 〉 bicarbonate（200 mg/L） 〉sulfate（100 mg/L） = nitrate（100 mg/L） 〉 silicate（10 mg/L） at a pH of 6.0.The effect of silicate became more significant at pH 〉 7.0.Calcium and magnesium improved the removal of fluoride.Zeta-potential measurements determined that the adsorption of fluoride shifted the PZC of Al（OH）_3 precipitates from 8.9 to 8.4,indicating the chemical adsorption of fluoride at the surface.The presence of fluoride in solution significantly increased the soluble aluminum concentration at pH 〈 6.5.A Visual MINTEQ modeling study indicated that the increased aluminum solubility was caused by the formation of AlF^（2＋）,AlF^（＋2）,and AlF_3complexes.The AlF_x complexes decreased the removal of fluoride during co-precipitation with aluminum sulfate.
