It has been analyzed the influence of the tectonic ambient shear stress value on response spectrum based on the previous theory. Based on the prediction equation BJF94 presented by the famous American researchers, CLB...It has been analyzed the influence of the tectonic ambient shear stress value on response spectrum based on the previous theory. Based on the prediction equation BJF94 presented by the famous American researchers, CLB20, a new prediction formula is proposed by us, where it is introduced the influence of tectonic ambient shear stress value on response spectrum. BJF94 is the prediction equation, which mainly depends on strong ground motion data from western USA, while the prediction equation SEA99 is based on the strong ground motion data from exten-sional region all over the world. Comparing these two prediction equations in detail, it is found that after BJF94′s prediction value lg(Y) minus 0.16 logarithmic units, the value is very close to SEA99′s one. This case demonstrates that lg(Y) in extensional region is smaller; the differences of prediction equation are mainly owe to the differences of tectonic ambient shear stress value. If the factor of tectonic ambient shear stress value is included into the pre-diction equation, and the magnitude is used seismic moment magnitude to express, which is universal used around the world, and the distance is used the distance of fault project, which commonly used by many people, then re-gional differences of prediction equation will become much less, even vanish, and it can be constructed the uni-versal prediction equation proper to all over the world. The error in the earthquake-resistant design in China will be small if we directly use the results of response spectrum of USA (e.g. BJF94 or SEA99).展开更多
A method calculating relative shear stress values in seismic source areas using data of seismic wave is used in thispaper which is introduced by PEI-SHAN CHEN, based on a rupture model studying seismic rupture process...A method calculating relative shear stress values in seismic source areas using data of seismic wave is used in thispaper which is introduced by PEI-SHAN CHEN, based on a rupture model studying seismic rupture process fromtheory of fracture mechanics. The shear stress values τ0 in mid-small earthquakes occurred in 1986~June of 1997in Yunnan and its adjacent areas are used to trace the variation process of ambient shear stress field before andafter three strong earthquakes in Yunnan and China-Myanmar border areas. The results show that there exists abackground of high values in ambient shear stress field. In the development process of a strong earthquake, theambient shear stress field in and nearby its potential source area increases obviously, for a long time, experiences aprocess of multiple down - up - down - up. The pattern of dynamic variation of ambient shear stress field hasreflected the multi-source fields of seismogenesis in and nearby Yunnan. There exist multi-increased areas of ambient shear slress fields synchronously in southwest, northwest. west and east of Yunnan, and three strong eathquakes of magnitude about 7 occurred in the most obviously increased areas of ambient shear stress fields.展开更多
A method is proposed to estimate average tectonic ambient shear stress value for a region. Thus the average stress values of 19 regions in western USA, and 43 regions (each region is 1010) in Chinese mainland and its ...A method is proposed to estimate average tectonic ambient shear stress value for a region. Thus the average stress values of 19 regions in western USA, and 43 regions (each region is 1010) in Chinese mainland and its surroundings have been obtained. The data of 15 993 earthquakes are from the Internet Centroid Moment Tensor solution made by Harvard University from 1997 to 1999. The results demonstrate that there are highest average stress values in the regions of south California of USA and its off coast sea, reach to 12.0 MPa and 13.7 MPa respectively, then gradually decrease toward north, south, and east. The lowest value is 8.7 MPa and 63% of highest value. The average stress values in northern Xinjiang and in the Chayu region of Tibet are 17.2 and 12.9 MPa respectively. They are highest values in China and higher than USAs. The average stress value in North China, Yunnan, Sichuan, Taiwan is similar to south California of USA. The average stress value in South-North seismic zone is about 13 MPa, a little higher than south California. The distribution of average stress value for two important regions provides basic data for geology. These results are useful to research earthquake activity background and attenuation relation of strong ground motion parameters (e.g. peak acceleration and response spectra).展开更多
On the basis of fracture mechanics earthquake rupture model, the relations between source parameters and (0, the value of tectonic ambient shear stress in the place where the earthquake occurs, have been derived. Thus...On the basis of fracture mechanics earthquake rupture model, the relations between source parameters and (0, the value of tectonic ambient shear stress in the place where the earthquake occurs, have been derived. Thus, we can calculate a large number of values of tectonic ambient shear stress or values of background stress in the place where the earthquake occurs. If nuclear explosions are treated as earthquakes in the calculation, we find that (0 values of nuclear explosions have about 20 MPa, which is obviously higher than average (0 values of earthquakes with the same magnitude. This result can be used to discriminate nuclear explosions from earthquakes.展开更多
ccording to the fracture mechanics rupture model of earthquakes put forward by us, several equations to compute tectonic ambient shear stress value τ0 have been derived [equations (1), (2), (3), (5)].τ0 values for i...ccording to the fracture mechanics rupture model of earthquakes put forward by us, several equations to compute tectonic ambient shear stress value τ0 have been derived [equations (1), (2), (3), (5)].τ0 values for intermediate and small earthquakes occurred in Chinese mainland and Southern California have been calculated by use of these equations. The results demonstrate that the level and distribution of τ0 are closely related to the location where large earthquakes will occur, i.e. the region with higher level of τ0 will be prone to occur large earthquakes and the region with lower level will usually occur small earthquakes. According to the spatial distribution of τ0 , the seismic hazard regions or the potential earthquake source regions can in some degree be determined. According to the variation of τ0 with time, the large earthquake occurrence time can be roughly estimated. According to the distribution of τ0 in Southern California and variation with time, three high stress level regions are determined, one (Goldfield area) of them is the present seismic hazard region.展开更多
基金National Natural Science Foundation of China (49874010)
文摘It has been analyzed the influence of the tectonic ambient shear stress value on response spectrum based on the previous theory. Based on the prediction equation BJF94 presented by the famous American researchers, CLB20, a new prediction formula is proposed by us, where it is introduced the influence of tectonic ambient shear stress value on response spectrum. BJF94 is the prediction equation, which mainly depends on strong ground motion data from western USA, while the prediction equation SEA99 is based on the strong ground motion data from exten-sional region all over the world. Comparing these two prediction equations in detail, it is found that after BJF94′s prediction value lg(Y) minus 0.16 logarithmic units, the value is very close to SEA99′s one. This case demonstrates that lg(Y) in extensional region is smaller; the differences of prediction equation are mainly owe to the differences of tectonic ambient shear stress value. If the factor of tectonic ambient shear stress value is included into the pre-diction equation, and the magnitude is used seismic moment magnitude to express, which is universal used around the world, and the distance is used the distance of fault project, which commonly used by many people, then re-gional differences of prediction equation will become much less, even vanish, and it can be constructed the uni-versal prediction equation proper to all over the world. The error in the earthquake-resistant design in China will be small if we directly use the results of response spectrum of USA (e.g. BJF94 or SEA99).
文摘A method calculating relative shear stress values in seismic source areas using data of seismic wave is used in thispaper which is introduced by PEI-SHAN CHEN, based on a rupture model studying seismic rupture process fromtheory of fracture mechanics. The shear stress values τ0 in mid-small earthquakes occurred in 1986~June of 1997in Yunnan and its adjacent areas are used to trace the variation process of ambient shear stress field before andafter three strong earthquakes in Yunnan and China-Myanmar border areas. The results show that there exists abackground of high values in ambient shear stress field. In the development process of a strong earthquake, theambient shear stress field in and nearby its potential source area increases obviously, for a long time, experiences aprocess of multiple down - up - down - up. The pattern of dynamic variation of ambient shear stress field hasreflected the multi-source fields of seismogenesis in and nearby Yunnan. There exist multi-increased areas of ambient shear slress fields synchronously in southwest, northwest. west and east of Yunnan, and three strong eathquakes of magnitude about 7 occurred in the most obviously increased areas of ambient shear stress fields.
基金National Science Foundation of China (No.49874010) Chinese Joint Seismological Science Foundation (95-07-441).
文摘A method is proposed to estimate average tectonic ambient shear stress value for a region. Thus the average stress values of 19 regions in western USA, and 43 regions (each region is 1010) in Chinese mainland and its surroundings have been obtained. The data of 15 993 earthquakes are from the Internet Centroid Moment Tensor solution made by Harvard University from 1997 to 1999. The results demonstrate that there are highest average stress values in the regions of south California of USA and its off coast sea, reach to 12.0 MPa and 13.7 MPa respectively, then gradually decrease toward north, south, and east. The lowest value is 8.7 MPa and 63% of highest value. The average stress values in northern Xinjiang and in the Chayu region of Tibet are 17.2 and 12.9 MPa respectively. They are highest values in China and higher than USAs. The average stress value in North China, Yunnan, Sichuan, Taiwan is similar to south California of USA. The average stress value in South-North seismic zone is about 13 MPa, a little higher than south California. The distribution of average stress value for two important regions provides basic data for geology. These results are useful to research earthquake activity background and attenuation relation of strong ground motion parameters (e.g. peak acceleration and response spectra).
文摘On the basis of fracture mechanics earthquake rupture model, the relations between source parameters and (0, the value of tectonic ambient shear stress in the place where the earthquake occurs, have been derived. Thus, we can calculate a large number of values of tectonic ambient shear stress or values of background stress in the place where the earthquake occurs. If nuclear explosions are treated as earthquakes in the calculation, we find that (0 values of nuclear explosions have about 20 MPa, which is obviously higher than average (0 values of earthquakes with the same magnitude. This result can be used to discriminate nuclear explosions from earthquakes.
文摘ccording to the fracture mechanics rupture model of earthquakes put forward by us, several equations to compute tectonic ambient shear stress value τ0 have been derived [equations (1), (2), (3), (5)].τ0 values for intermediate and small earthquakes occurred in Chinese mainland and Southern California have been calculated by use of these equations. The results demonstrate that the level and distribution of τ0 are closely related to the location where large earthquakes will occur, i.e. the region with higher level of τ0 will be prone to occur large earthquakes and the region with lower level will usually occur small earthquakes. According to the spatial distribution of τ0 , the seismic hazard regions or the potential earthquake source regions can in some degree be determined. According to the variation of τ0 with time, the large earthquake occurrence time can be roughly estimated. According to the distribution of τ0 in Southern California and variation with time, three high stress level regions are determined, one (Goldfield area) of them is the present seismic hazard region.
