A 2 D-2 D titanium dioxide nanosheet-reduced graphene oxide(TNS-r GO)composite with better electronic conductivity and hydrophilicity was prepared by the hydrothermal method.The as-obtained TNS-r GO composite was furt...A 2 D-2 D titanium dioxide nanosheet-reduced graphene oxide(TNS-r GO)composite with better electronic conductivity and hydrophilicity was prepared by the hydrothermal method.The as-obtained TNS-r GO composite was further functionalized with 3-aminopropyltriethoxysilane(APTES)to provide a large amount of-NH2 groups on the surface for anchoring ultrafine Pd Ag alloy nanoparticles with an average particle size of 1.69 nm by a facile wet reduction approach.Benefiting from the combined effects of well-dispersed Pd Ag alloy nanoparticles,facilitated electron transfer from TNS-r GO to Pd,and increased electron density of active sites,the Pd8 Ag_(1)/NH_(2)-TNS-r GO catalyst exhibited excellent activity towards dehydrogenation of formic acid without adding any additives at 298 K,corresponding to an initial turn over frequency as high as 1090 h-1,which is much higher than that of most other state-of-theart catalysts.展开更多
Nano structure including pore structure and amine assembly is critical for improving sorption and desorption kinetics for adsorptive CO_(2) separation.The present work delineates(1)the influence of the nano-scale pore...Nano structure including pore structure and amine assembly is critical for improving sorption and desorption kinetics for adsorptive CO_(2) separation.The present work delineates(1)the influence of the nano-scale pore structure of amine-functionalized solid sorbents,and(2)effect of changing the assembly of amine molecules on surface of nano-porous SiO_(2) on the rates of adsorption and desorption of CO_(2).50PEI-MSN sorbent with inverted cone-shaped pores was prepared by using mesoporous silica nanospheres(MSN)with inverted cone-shaped pores for the loading of polyethyleneimine(PEI).Co-structure-directing(CSD)method was used to synthesize the sorbent with arranged amine assembly at nano-scale(2N-CSD).By comparison with 50PE卜SBA15 as a benchmark sorbent,both sorbents have improved sorption and desorption kinetics.There are significant effects of nano pore structure and amine assembly on the sorption and desorption kinetics.The inverted cone-shaped pores in MSN allow loading polymeric amines in their narrower ends and leaving larger pore mouths open for the transport of CO_(2);50PEI-MSN shows a maximum sorption rate of 81.4 mg·g^(-1)·min^(-1) with average sorption rate of 25.4mg·g^(-1)·min^(-1) at 80℃ which are 34%and 59%higher than the corresponding values for 50PEI-SBA15;a maximum desorption rate of 38.4mg·g^(-1)·min^(-1) with average desorption rate of 11.8 mg·g^(-1)·min^(-1) ramping from 30 to 95℃ which are 37%and 156%higher than the corresponding values for 50PEI-SBA15.The arranged monolayer-like amine assembly on surface of nanoporous SiO_(2) likely provides high amine sorption sites through improved accessibility of amine,and 2N-CSD shows a maximum sorption rate of 60.5 mg·g^(-1)·min^(-1),with average sorption rate of 12.8mg·g^(-1)·min^(-1) at 300C which are 108%and 205%higher than the corresponding values for 50PEI-SBA15;a lower maximum desorption rate of 9.7 mg g'1min"1 and average desorption rate of 9.8mg·g^(-1)·min^(-1) ramping from 30 to 95℃ which is 250%higher than the corresponding value for 50PEI-SBA15.The present work demonstrates the importance of tailoring nano-scale pore structure and amine assembly for significantly improving sorption and desorption kinetics of adsorptive CO_(2) separation.展开更多
In the work,we propose an efficient one-pot approach for synthesis of a new type of mesoporous silica nanoparticles(MSNs).That can be successfully realized by using tetraethylorthosilicate(TEOS) and N-[3-(trimethoxysi...In the work,we propose an efficient one-pot approach for synthesis of a new type of mesoporous silica nanoparticles(MSNs).That can be successfully realized by using tetraethylorthosilicate(TEOS) and N-[3-(trimethoxysilyl)propyl]ethylenediamine(TSD) as the silica precursors and cetyltrimethylammonium bromide(CTAB) as the structure-directing agent through a facile assembly process.The as-synthesized MSNs possess a spherical morphology with about 230 nm,a relatively high surface area of133 m^2/g,and a hierarchical pore size distribution.When applied as the sorbents,the amine-functioned MSNs demonstrate the enhanced adsorption capacity for CO2 capture(at 1 bar,15 vol% CO2,up to80.5 mg/g at 75℃),high selectivity,and good cycling durability,benefiting from the suitable modification of polyethyleneimine.展开更多
基金the financial supports from the Shandong Provincial Natural Science Foundation(Grant No.ZR201910220216)the Key Research and Development Plan of Shandong Province(2019GGX104034)+1 种基金the Foundation of State Key Laboratory of High-efficiency Utilization of Coal,and Green Chemical Engineering(Grant No.2020-KF-18)the Taishan Scholar Program of Shandong Province(No.ts201712045)。
文摘A 2 D-2 D titanium dioxide nanosheet-reduced graphene oxide(TNS-r GO)composite with better electronic conductivity and hydrophilicity was prepared by the hydrothermal method.The as-obtained TNS-r GO composite was further functionalized with 3-aminopropyltriethoxysilane(APTES)to provide a large amount of-NH2 groups on the surface for anchoring ultrafine Pd Ag alloy nanoparticles with an average particle size of 1.69 nm by a facile wet reduction approach.Benefiting from the combined effects of well-dispersed Pd Ag alloy nanoparticles,facilitated electron transfer from TNS-r GO to Pd,and increased electron density of active sites,the Pd8 Ag_(1)/NH_(2)-TNS-r GO catalyst exhibited excellent activity towards dehydrogenation of formic acid without adding any additives at 298 K,corresponding to an initial turn over frequency as high as 1090 h-1,which is much higher than that of most other state-of-theart catalysts.
基金financially supported by the National Key Research and Development Program of China(No.2016YFB0600902-4)the Fundamental Research Funds for the Central Universities(No.DUT20RC(5)002)the CUHK Research Startup Fund(No.#4930981).
文摘Nano structure including pore structure and amine assembly is critical for improving sorption and desorption kinetics for adsorptive CO_(2) separation.The present work delineates(1)the influence of the nano-scale pore structure of amine-functionalized solid sorbents,and(2)effect of changing the assembly of amine molecules on surface of nano-porous SiO_(2) on the rates of adsorption and desorption of CO_(2).50PEI-MSN sorbent with inverted cone-shaped pores was prepared by using mesoporous silica nanospheres(MSN)with inverted cone-shaped pores for the loading of polyethyleneimine(PEI).Co-structure-directing(CSD)method was used to synthesize the sorbent with arranged amine assembly at nano-scale(2N-CSD).By comparison with 50PE卜SBA15 as a benchmark sorbent,both sorbents have improved sorption and desorption kinetics.There are significant effects of nano pore structure and amine assembly on the sorption and desorption kinetics.The inverted cone-shaped pores in MSN allow loading polymeric amines in their narrower ends and leaving larger pore mouths open for the transport of CO_(2);50PEI-MSN shows a maximum sorption rate of 81.4 mg·g^(-1)·min^(-1) with average sorption rate of 25.4mg·g^(-1)·min^(-1) at 80℃ which are 34%and 59%higher than the corresponding values for 50PEI-SBA15;a maximum desorption rate of 38.4mg·g^(-1)·min^(-1) with average desorption rate of 11.8 mg·g^(-1)·min^(-1) ramping from 30 to 95℃ which are 37%and 156%higher than the corresponding values for 50PEI-SBA15.The arranged monolayer-like amine assembly on surface of nanoporous SiO_(2) likely provides high amine sorption sites through improved accessibility of amine,and 2N-CSD shows a maximum sorption rate of 60.5 mg·g^(-1)·min^(-1),with average sorption rate of 12.8mg·g^(-1)·min^(-1) at 300C which are 108%and 205%higher than the corresponding values for 50PEI-SBA15;a lower maximum desorption rate of 9.7 mg g'1min"1 and average desorption rate of 9.8mg·g^(-1)·min^(-1) ramping from 30 to 95℃ which is 250%higher than the corresponding value for 50PEI-SBA15.The present work demonstrates the importance of tailoring nano-scale pore structure and amine assembly for significantly improving sorption and desorption kinetics of adsorptive CO_(2) separation.
基金support from the Shanghai Pujiang Program (No.17PJD015)Shuguang Program supported by Shanghai Education Development Foundation and Shanghai Municipal Education Commission (No.18SG035)
文摘In the work,we propose an efficient one-pot approach for synthesis of a new type of mesoporous silica nanoparticles(MSNs).That can be successfully realized by using tetraethylorthosilicate(TEOS) and N-[3-(trimethoxysilyl)propyl]ethylenediamine(TSD) as the silica precursors and cetyltrimethylammonium bromide(CTAB) as the structure-directing agent through a facile assembly process.The as-synthesized MSNs possess a spherical morphology with about 230 nm,a relatively high surface area of133 m^2/g,and a hierarchical pore size distribution.When applied as the sorbents,the amine-functioned MSNs demonstrate the enhanced adsorption capacity for CO2 capture(at 1 bar,15 vol% CO2,up to80.5 mg/g at 75℃),high selectivity,and good cycling durability,benefiting from the suitable modification of polyethyleneimine.