We proposed a new way to synthesize a nanocomposite consisted of cementite Fe3C nanoparticles and amorphous carbon by radio frequency plasma-enhanced chemical vapor deposition. Transmission electron microscope images ...We proposed a new way to synthesize a nanocomposite consisted of cementite Fe3C nanoparticles and amorphous carbon by radio frequency plasma-enhanced chemical vapor deposition. Transmission electron microscope images show the existence of nanometric dark grains（Fe3C） embedded in a light matrix（amorphous carbon） in the samples. X-ray photoelectron spectroscopy experiment exhibit that the chemical bonding state in the films corresponded to sp3/sp2 amorphous carbon, sp^3 C-N（287.3 eV） and C15 in Fe3C（283.5 eV）. With increasing deposition time, the ratio of amorphous carbon increased. The magnetic measurements show that the value of in-lane coercivity increased with increasing carbon matrix concentration（from about 6.56× 10^3 A/m for film without carbon structures to approximately 2.77× 10^4 and 5.81 × 10^4 AJm for nanocomposite films at room temperature and 10 K, respectively）. The values of saturation magnetization for the synthesized nanocomposites were lower than that of the bulk Fe3C （ 140 Am^2/kg）.展开更多
The surface nanocrystallization of amorphous Fe73.5 Cu1Nb3Si13.5B9 radiated by CO2 laser was studied by means of M（oe）ssbauer spectroscopy, transmission electro iroscope and X-ray diffraction. The result shows that ...The surface nanocrystallization of amorphous Fe73.5 Cu1Nb3Si13.5B9 radiated by CO2 laser was studied by means of M（oe）ssbauer spectroscopy, transmission electro iroscope and X-ray diffraction. The result shows that under certain technical conditions, nanocrystalline is fiound on the surface of amorphous Fe73.5 Cu1Nb3Si13.5B9 radiated by laser; the crystallization phase is α-Fe（Si） crystalline, and its size is about 10-20 nm; the nanocrystalline is uniformly distributed on amorphous base to keep the amorphous and crystallized phase in balance; the a mount of crystallization reaches 23% when the laser power is 300 W, the diameter of light spot is 20 mm, and the radiation speed is 20 mm/s. The phase balance can be controlled by adjusting the laser technology parameter. Laser radiation on the amorphous Fe73.5 Cu1Nb3Si13.5B9 alloy is an important technique for surface nanocrystallization of the amorphous alloys.展开更多
The behaviour of hydrogen permeation and diffusion in amorphous alloy Ni68Cr7Si8B14Fe3 hasbeen investigated by an ultrahigh vacuum gas permeation technique. A comparison experimentwas carried out between the as-quench...The behaviour of hydrogen permeation and diffusion in amorphous alloy Ni68Cr7Si8B14Fe3 hasbeen investigated by an ultrahigh vacuum gas permeation technique. A comparison experimentwas carried out between the as-quenched and annealed States (400℃/2h) of the amorphousalloy. The results show that, for both states of the amorphous alloy in the temperature rangeof 200～350℃, the diffusivity and permeability of hydrogen are in agreement with Arrheniusrelationship, there does not exist H-trapping effect, and the activation energies of diffusion andpermeation almost keep the same.展开更多
基金Supported by the National Natural Science Foundation of China(No.50832001)the Science and Technology Develop-ment Program of Jilin Province, China(No.20070501)
文摘We proposed a new way to synthesize a nanocomposite consisted of cementite Fe3C nanoparticles and amorphous carbon by radio frequency plasma-enhanced chemical vapor deposition. Transmission electron microscope images show the existence of nanometric dark grains（Fe3C） embedded in a light matrix（amorphous carbon） in the samples. X-ray photoelectron spectroscopy experiment exhibit that the chemical bonding state in the films corresponded to sp3/sp2 amorphous carbon, sp^3 C-N（287.3 eV） and C15 in Fe3C（283.5 eV）. With increasing deposition time, the ratio of amorphous carbon increased. The magnetic measurements show that the value of in-lane coercivity increased with increasing carbon matrix concentration（from about 6.56× 10^3 A/m for film without carbon structures to approximately 2.77× 10^4 and 5.81 × 10^4 AJm for nanocomposite films at room temperature and 10 K, respectively）. The values of saturation magnetization for the synthesized nanocomposites were lower than that of the bulk Fe3C （ 140 Am^2/kg）.
文摘The surface nanocrystallization of amorphous Fe73.5 Cu1Nb3Si13.5B9 radiated by CO2 laser was studied by means of M（oe）ssbauer spectroscopy, transmission electro iroscope and X-ray diffraction. The result shows that under certain technical conditions, nanocrystalline is fiound on the surface of amorphous Fe73.5 Cu1Nb3Si13.5B9 radiated by laser; the crystallization phase is α-Fe（Si） crystalline, and its size is about 10-20 nm; the nanocrystalline is uniformly distributed on amorphous base to keep the amorphous and crystallized phase in balance; the a mount of crystallization reaches 23% when the laser power is 300 W, the diameter of light spot is 20 mm, and the radiation speed is 20 mm/s. The phase balance can be controlled by adjusting the laser technology parameter. Laser radiation on the amorphous Fe73.5 Cu1Nb3Si13.5B9 alloy is an important technique for surface nanocrystallization of the amorphous alloys.
文摘The behaviour of hydrogen permeation and diffusion in amorphous alloy Ni68Cr7Si8B14Fe3 hasbeen investigated by an ultrahigh vacuum gas permeation technique. A comparison experimentwas carried out between the as-quenched and annealed States (400℃/2h) of the amorphousalloy. The results show that, for both states of the amorphous alloy in the temperature rangeof 200～350℃, the diffusivity and permeability of hydrogen are in agreement with Arrheniusrelationship, there does not exist H-trapping effect, and the activation energies of diffusion andpermeation almost keep the same.
