Effect of inorganic carbon on anaerobic ammonium oxidation enriched in sequencing batch reactor

The present lab-scale research reveals the enrichment of anaerobic ammonium oxidation microorganism from methanogenic anaerobic granular sludge and the effect of inorganic carbon(sodium bicarbonate)on anaerobic ammonium oxidation.The enrichment of anammox bacteria was carried out in a 7.0-L sequencing batch reactor(SBR)and the effect of bicarbonate on anammox was conducted in a 3.0-L SBR.Research results,especially the biomass,showed first signs of anammox activity after 54 d cultivation with synthetic wast...

Effects of operational factors on soluble microbial products in a carrier anaerobic baffled reactor treating dilute wastewater

The effects of feed strength, hydraulic residence time （HRT）, and operational temperatures on soluble microbial product （SMP） production were investigated, to gain insights into the production mechanism. A carrier anaerobic baffled reactor （CABR） treating dilute wastewater was operated under a wide range of operational conditions, namely, feed strengths of 300-600 mg/L, HRTs of 9- 18 h, and temperatures of 10-28℃. Generally, SMP production increased with increasing feed strength and decreasing temperature. At high temperature （28℃）, SMP production increased with decreasing HRT. As the temperature was decreased to 18 and 10℃, the SMP production was at its peak for 12 h HRT. Therefore, temperature could be an important determinant of SMP production along with HRT. A higher SMP to soluble chemical oxygen demand （SCOD） ratio was found at high temperature and long HRT because of complete volatile fatty acid degradation. SMP accounted for 50%-75% of the SCOD in the last chamber of the CABR. As a secondary metabolite, some SMP could be consumed at lower feed strength.

Hydrodynamic characteristics of a four-compartment periodic anaerobic baffled reactor

Periodic anaerobic baffled reactor （PABR） is a novel reactor based on the design concept of anaerobic baffled reactor （ABR）. Residence time distribution （RTD） studies on both clean and working reactors at the same hydraulic residence time （HRT） of 2 d were carded out to investigate the dead spaces and mixing patterns in PABRs at different organic loading rates （OLRs） in various switching manners and frequencies. The results showed that the fraction of dead space in PABR was similar to that in ABR, which was low in comparison with other reactor designs. Dead space may be divided into two categories, hydraulic and biological. In RTD studies without biomass, the hydraulic dead space in the PABR run in an ＂every second＂ switching manner with T = 2 d was the lowest whereas that in the PABR run in a T = ∞ （ABR） switching manner was the highest. The same trend was obtained with the total dead space in RTD studies with biomass no matter what the OLR was. Biological dead space was the major contributor to dead space but affected decreasingly at higher OLR whichever switching manner the PABR run in. The flow patterns within the PABRs were intermediate between plug-flow and perfectly mixed under all the conditions tested,

Anaerobic tapered fluidized bed reactor for starch wastewater treatment and modeling using multilayer perceptron neural network

treatability of synthetic sago wastewater was investigated in a laboratory anaerobic tapered fluidized bed reactor （ATFBR） with a mesoporous granular activated carbon （GAC） as a support material. The experimental protocol was defined to examine the effect of the maximum organic loading rate （OLR）, hydraulic retention time （HRT）, the efficiency of the reactor and to report on its steady- state performance. The reactor was subjected to a steady-state operation over a range of OLR up to 85.44 kg COD/（m^3·d）. The COD removal efficiency was found to be 92% in the reactor while the biogas produced in the digester reached 25.38 m^3/（m^3·d） of the reactor. With the increase of OLR from 83.7 kg COD/（m^3·d）, the COD removal efficiency decreased. Also an artificial neural network （ANN） model using multilayer perceptron （MLP） has been developed for a system of two input variable and five output dependent variables. For the training of the input-output data, the experimental values obtained have been used. The output parameters predicted have been found to be much closer to the corresponding experimental ones and the model was validated for 30% of the untrained data. The mean square error （MSE） was found to be only 0.0146.

Effects of Temperature and Hydraulic Residence Time (HRT) on Treatment of Dilute Wastewater in a Carrier Anaerobic Baffled Reactor

Objective To examine the effect of hydraulic residence time （HRT） on the performance and stability, to treat dilute wastewater at different operational temperatures in a carrier anaerobic baffled reactor （CABR）, and hence to gain a deeper insight into microbial responses to hydraulic shocks on the base of the relationships among macroscopic performance, catabolic intermediate, and microcosmic alternation. Methods COD, VFAs, and microbial activity were detected with constant feed strength （300 mg/L） at different HRTs （9-18 h） and temperatures （10℃-28℃） in a CABR. Results The removal efficiencies declined with the decreases of HRTs and temperatures. However, the COD removal load was still higher at short HRT than at long HRT. Devastating reactor performance happened at temperature of 10℃ and at HRT of 9 h. HRTs had effect on the VFAs in the reactor slightly both at high and low temperatures, but the reasons differed from each other. Microbial activity was sensitive to indicate changes of environmental and operational parameters in the reactor. Conclusion The CABR offers to certain extent an application to treat dilute wastewater under a hydraulic-shock at temperatures from 10℃to 28℃.

Pretreatment of coking wastewater using anaerobic sequencing batch reactor (ASBR)

A laboratory-scale anaerobic sequencing batch reactor (ASBR) was used to pretreat coking wastewater. Inoculated anaerobic granular biomass was acclimated for 225 d to the coking wastewater, and then the biochemical methane potential (BMP)of the coking wastewater in the acclimated granular biomass was measured. At the same time, some fundamental technological factors, such as the filling time and the reacting time ratio (tf/tr), the mixing intensity and the intermittent mixing mode, that affect anaerobic pretreatment of coking wastewater with ASBR, were evaluated through orthogonal tests. The COD removal efficiency reached 38％～50％ in the stable operation period with the organic loading rate of 0.37～0.54 kg COD/(m3.d) at the optimum conditions of tf/tr, the mixing intensity and the intermittent mixing mode. In addition, the biodegradability of coking wastewater distinctly increased after the pretreatment using ASBR. At the end of the experiment, the microorganism forms on the granulated sludge in the ASBR were observed using SEM (scanning electron microscope) and fluoroscope. The results showed that the dominant microorganism on the granular sludge was Methanosaeta instead of Methanosarcina dominated on the inoculated sludge.

Cd^(2+) removal from wastewater by sulfate reducing bacteria with an anaerobic fluidized bed reactor

A process of treatment for containing Cd 2+ wastewater by sulfate reducing bacteria with upflow anaerobic fluidized bed reactor has been studied. When the concentration of COD and Cd 2+ in the influent were 270 5mg/L and 100mg/L respectively and hydraulic retention time was 4 hours, the removal rate of COD and Cd 2+ were higher than 73 8% and 99 8% respectively. The reactor can treat as high as 1000mg/L of concentration of Cd 2+ . The highest removal velocity rate of Cd 2+ reached 2999 1mg/(L·d). And the possible relationship between sulfate reducing bacteria and methanogenic bacteria was discussed.

Start-up and Performance of a Novel Reactor----Jet Biogas Inter-loop Anaerobic Fluidized Bed

A novel anaerobic reactor, jet biogas inter-loop anaerobic fluidized bed （JBILAFB）, was designed and constructed. The start-up and performance of the reactor was investigated in the Process. of .artificial glucose wastewater treatment. With the wastewater recycle ratio of 2.5 ： 1, the recycled wastewater with biogas could mix sludge and wastewater in the JBILAFB reactor completely. The start-up of the JBILAFB reactor could be completed in less than 70 d through maintenance of hydraulic retention time （HR^I＂） and stepwise increase of feed total organic carbon （TOC） concentration. After the start-up, with the volumetric TOC loadings of 14.3 kg·m ^-3·d^-1, the TOC removal ratio, the effluent pH, and the volatile fatty acids （VFA）/alkalinity of the JBILAFB reactor were more than 80%, close to 7.0 and less than 0.4, respectively. Moreover, CH4 was produced at more than 70% of the theoretical value, The reactor exhibited high stability under the condition of high volumetric TOC loading. Sludge granules in the JBILAFB reactor were developed during the start-up and their sizes were enlarged with the stepwise increase of volumetric TOC loadings from 0.8 kg.m^-3.d ^-1 to 14.3 kg.m^-3.d^-1. Granules, an offwhite color and a similar spherical shape, were mainly comprised of global-like bacteria. These had good methanogenic activity and settleability, which were formed probably through adhesion of the bacteria. Some inorganic metal compounds such as Fe, Ca, Mg, Al, etc. were advantageous to the formation of the granules.

Application of Froude dynamic similitude in anaerobic baffled reactors to prediction of hydrodynamic characteristics of a prototype reactorusing a model reactor

An anaerobic baffled reactor is a system developed in recent decades and has been used as part of the treatment of high-strength wastewater. Since the function of this system is based on its hydrodynamic features, hydrodynamics and the regime of the flow through the reactor are crucial. In this study, a prototype reactor with eight chambers, which had a total volume of 48 L, and a model reactor, whose dimensions were half of those of the prototype reactor, were used. The Froude dynamic similitude in these reactors was investigated. The results show that the curve dimensionless variances were 0.089 and 0.096 for the prototype and model reactors, respectively, the short-circuiting indices were 0.483 and 0.489 for the prototype and model reactors, respectively, the effective volume and short-circuiting index measurement errors were both 1%, the hydraulic efficiency error was 2%, and the Peclet and dispersion number errors were both 7%. Most of the compared indices were close to one another in value. Therefore, the model reactor can be used based on the Froude dynamic similitude to determine hydrodynamic charac-teristics of a baffled reactor at a full scale.

Anaerobic digestion for waste water poultry manure by UBF reactor

In this experiment the performance of UBF process treatment for wastewater chicken manure was tested under the condition of constant temperature of 35℃ and the volume of UBF is 4 liters. The experiment covered two stages: the first was start up with phase I and phase II, the second was steady state. The following results average of operation period were obtained: (1) During the period of start up phase I operation the biogas production rate 0.39v/(v.day) at the volumetric COD loading rate of 2.97 kg COD/(m 3.d) with COD removal 76.85% and hydraulic retention time of 10.04 hours and phase II the biogas production rate 3.86 v/(v.day) at the volume loading rate 11.69 kg COD/(m 3.d) have been achieved with COD removal 82.47% and HRT 16.45 hours. UBF process had resistance to the quantitative shock load. (2) During the steady state operation, the biogas production rate 9.83v/(v.day) at loading rate of 28.85 kg COD/(m 3.d) and COD removal efficiency 80.03% and hydraulic retention time of 18.73 hours have been achieved for this reactor. The operation of UBF reactor was very stable.

Treatment of methanol wastewater in external circulation anaerobic reactor with different inoculums

In order to guide the inoculums selection for the anaerobic treatment of methanol wastewater in the engineering application,two 7 L bench-scale external circulation (EC) anaerobic reactors were operated to investigate the inoculums of anaerobic granular sludge and anaerobic digested sludge,focusing on the efficiency and process stability.The effect of impact concentration and temperature on the performance was studied.The results demonstrated that anaerobic granular sludge as the inoculums could complete the start-up more rapidly than the anaerobic digested sludge,and above 90% COD removal were achieved at the organic loading rate of 10 to 15 kgCOD/(m3·d).The effect of impact COD on the methanogenic activity of sludge was weak and the removal efficiencies recovered gradually in the two reactors.The COD removal efficiencies reduced swiftly to 50%-60% due to the impact temperature.The results indicated that the complex bacterial groups in anaerobic digested sludge benefited to enhance the reactor's capacity for withstanding the temperature shock at some extent.

In-depth observations of fermentative hydrogen production from liquid swine manure using an anaerobic sequencing batch reactor

In this study,experiments were designed to reveal in-depth information of the effect of pH and hydraulic retention time（HRT）on biohydrogen fermentation from liquid swine manure supplemented with glucose using an Anaerobic Sequencing Batch Reactor（ASBR）System.Five values of HRT（8,12,16,20,and 24 h）were first tested and the best HRT determined was further studied at five p H levels（4.4,4.7,5.0,5.3,and 5.6）.The results showed that for HRT 24 h,there was a dividing H2 content（around 37%）related to the total biogas production rate for the ASBR System running at p H 5.0.When the H2 content went beyond 37%,an appreciable decline in biogas production rate was observed,implying that there might exist an H2 content limit in the biogas.For other HRTs（8 through 20 h）,an average H2 content of 42%could be achieved.In the second experiment（HRT 12 h）,the highest H2 content（35%）in the biogas was found to be associated with p H 5.0.The upswing of p H from 5.0 to 5.6 had a significantly more impact on biogas H2 content than the downswing of p H from5.0 to 4.3.The results also indicated good linear relationships of biogas and H2 production rates with HRT（r=0.9971 and0.9967,respectively）.Since the optimal ASBR operating conditions were different for the biogas/H2 production rates and the H2 yield,a compromised combination of the running parameters was determined to be HRT 12 h and pH 5.0 in order to achieve good biogas/H2 productions.

Anaerobic-aerobic processes for the treatment of textile dyeing wastewater containing three commercial reactive azo dyes:Effect of number of stages and bioreactor type

In this study,the effect of number of stages and bioreactor type on the removal performance of a sequential anaerobic-aerobic process employing activated sludge for the treatment of a simulated textile dyeing wastewater containing three commercial reactive azo dyes was considered.Two stage processes performed better than one stage ones,both in terms of overall organic and color removal,as well as the higher contribution of anaerobic stage to the overall removal performance,thereby making them a more energy efficient option.The employment of a moving bed sequencing batch biofilm reactor,which uses both suspended and attached biomass,for the implementation of the anaerobic stage of the process,was compared with a sequencing batch reactor that only employs suspended biomass.The results showed that,although there was no meaningful difference in biomass concentration between the two bioreactors,the latter reactor had better performance in terms of chemical oxygen demand(COD)removal efficiency and rate and color removal rate.Further exploratory tests revealed a difference between the roles of suspended and attached bacterial populations,with the former yielding better color removal whilst the latter had better COD removal performance.The sequential anaerobic–aerobic process,employing an aerobic membrane bioreactor in the aerobic stage resulted in COD and color removal of 77.1±7.9%and 79.9±1.5%,respectively.The incomplete COD and color removal was attributed to the presence of soluble microbial products in the effluent and the autoxidation of dye reduction metabolites,respectively.Also,aerobic partial mineralization of the dye reduction metabolites,was experimentally observed.

ATP content and biomass activity in sequential anaerobic／aerobic reactors

Specific ATP content of volatile solids was measured to characterize the sludge activity in a sequential anaerobic/aerobic wastewater treatment system, with an upflow anaerobic sludge blanket (UASB) reactor and a three-phase aerobic fluidized bed (AFB) reactor. The wastewater COD level was 2000-3000 mg/L in simulation of real textile wastewater. The ATP content and the specific ATP contents of volatile solids at different heights of the UASB reactor and those of the suspended and immobilized biomass in the AFB reactor were measured. In the UASB reactor, the maximum value of specific ATP (0.85 mg ATP/g VS) was obtained at a hydraulic retention time (HRT) 7.14 h in the blanket solution. In the AFB reactor, the specific ATP content of suspended biomass was higher than that of immobilized biomass and increased with hydraulic retention time reaching a maximum value of 1.6 mg ATP/g VS at hydraulic retention time 4.35 h. The ATP content of anaerobes in the UASB effluent declined rapidly under aerobic conditions following a 2nd-order kinetic model.

Anaerobic Membrane Bioreactor as Highly Efficient and Reliable Technology for Wastewater Treatment—A Review

In this review paper, Anaerobic Membrane Bioreactor (AnMBR) is considering as highly efficient and reliable technology for organic material removal from wastewater with no additional energy requirement for aeration. AnMBR is a combination of conventional anaerobic technology and modern membrane system. AnMBR is cost effective alternative technology with pros of anaerobic microbial activity because Methogenic microorganism can convert organic pollutant load of wastewater into renewable energy in the form of methane rich biogas, this conversion is mainly done by transformation of organic matter into energy by high chemical oxygen demand (COD), total suspended solid (TSS) and pathogens removal. Methane rich biogas can be used as a storable source of supplemental energy for the production of heat or power thus AnMBR technology provides improved effluent quality, reliability, and efficiency over the other traditional technologies. This review paper is included the overview of AnMBR, the advantages over other wastewater treatment technology, operational constraints and the concerned factors that has affected the performances of implemented systems, applications of AnMBR for various types of wastewaters, research and development summary and future perspective for further research.

Biological Nitrogen and COD Removal of Nutrient-Rich Wastewater Using Aerobic and Anaerobic Reactors

A preliminary study on nitrogen and organic removal efficiency of a lab-scale system using aerobic and an-aerobic reactors was performed. A simulated wastewater containing elevated levels of nitrogen was used. This paper aims to compare the efficiency of aerobic and anaerobic reactors in achieving nitrogen and chemical oxygen demand (COD) removal of nutrient-rich wastewater. It also presents the start-up experi-mentation conducted on simulated wastewater using two different reactors configured as aerobic and anaero-bic. Start-up experiments were carried out using a 5-liter acrylic aerobic reactor and a 4-liter flask anaerobic reactor containing activated sludge taken from De La Salle University (DLSU) wastewater treatment plant as a source of inoculum. Simulated wastewater was continuously fed to the two reactors and the time course of biomass growth was monitored by measuring the biomass concentration represented by mixed liquor volatile solids (MLVS). The time course of organic pollutant reduction by measuring the chemical oxygen demand (COD) was conducted until steady state condition was reached. On the other hand, COD and nitrogen tests such as Ammonia nitrogen (NH3-N), Nitrite nitrogen (NO2--N), Nitrate nitrogen (NO3--N) were also per-formed using 5 batch aerobic reactors containing different concentrations of wastewater and a single batch anaerobic reactor to see the effect of different feed concentrations in the removal of nitrogen. Preliminary results showed that 98% reduction in COD was obtained in aerobic reactor, as supported by increasing con-centration of MLVS, with a hydraulic retention time (HRT) of 5 hours after 11 days while 34% reduction in COD was obtained in anaerobic reactor with the same HRT after 14 days.

Function of anaerobic portion in a conventional sequencing batch reactor

The performance of SBRs treating two kinds of wastewater(synthetic wastewater con- taining polyvinyl alcohol and effluent from a coke-plant wastewater treatment system)was investi- gated in this study,in order to examine the exact function of anaerobic portion in a conventional SBR.The set up of 4-or 8-hour anaerobic mixing period in a SBR's cycle did not benefit for PVA degradation.While an anaerobic reactor seeded with anaerobic sludge could partly hydrolyse and acidify PVA into readily-degradable intermediates.During the anaerobic fill period of an SBR treat- ing the effluent from a coke-plant wastewater treatment system,the organic concentration was re- duced to certain extent due to the adsorption of activated sludge and dilution of the mixed liquor from the previous cycle.Parts of readily-degradable organics in the influent were utilised by denitri- fiers as carbon source.The biomass in a conventional SBR was alternatively imposed to aerobic and anaerobic conditions in its operating cycle,the environmental conditions needed for anaerobic hy- drolization and acidification of refractory organics could not occur in such an SBR.

Hydraulic modeling of an anaerobic expanded bed reactor for municipal sewage treatment

Anaerobic expanded bed reactor(AEBR) is mostly used for the treatment of fairly low strength wastewaters. Since the performance of AEBR largely depends on its hydraulic characteristics, residence time distribution(RTD) method is commonly used for investigation of the hydraulic characteristics of AEBR under different ascending velocity of mixed liquor. In this paper, a pilot-scale AEBR reactor is investigated for treatment of municipal sewage in which lithium chloride is used as a tracer. The results show that the AEBR could be considered as the superimposition of several constant stirred tank reactors(CSTR) and the increase of hydraulic up-flow velocity could increase the number of the CSTR and decrease the volume rate of the dead zone. The optimal up-flow velocity of the investigated AEBR was approximately 1.9 m/h in the municipal sewage treatment.

A review of modified and hybrid anaerobic baffled reactors for industrial wastewater treatment

This review discusses high-strength wastewater treatment using anaerobic baffled reactors(ABRs)and modified ABRs.The research findings and applications of ABRs in treating various types of high strength wastewater generated from food companies,livestock,and industries were summarized and reported.Measurement parameters affecting the performance of ABRs are briefly discussed.The state-of-the-art laboratory studies are compiled and critically reviewed.Critical challenges and suggestions for future investigation are also addressed.

Microbiological Characteristics of Anaerobic Granular Sludge in Hybrid Anaerobic Baffled Reactor

Anaerobic granular sludge is of key importance for highly effective operation of hybrid anaerobic baffled reactor(HABR).An observation and analysis on the composition of anaerobic granular sludge in each separation compartment of HABR was conducted by using scanning electron microscope(SEM)and molecular biotechnology,and specific methanogenic activity(SMA)and coenzyme F420 content were determined.It was indicated that the disparity of microbial composition was significant among these separation compartments of HABR,and the HABR encouraged phase separation.The results show the understanding of microbiological characteristics of anaerobic granular sludge in HABR is helpful for cultivating granular sludge,which ensures the effective operation of the reactor.