Bunch-length measurement at a bunch-by-bunch rate based on time–frequency-domain joint analysis techniques and its application

This paper presents a new technique for measuring the bunch length of a high-energy electron beam at a bunch-by-bunch rate in storage rings.This technique uses the time–frequency-domain joint analysis of the bunch signal to obtain bunch-by-bunch and turn-by-turn longitudinal parameters,such as bunch length and synchronous phase.The bunch signal is obtained using a button electrode with a bandwidth of several gigahertz.The data acquisition device was a high-speed digital oscilloscope with a sampling rate of more than 10 GS/s,and the single-shot sampling data buffer covered thousands of turns.The bunch-length and synchronous phase information were extracted via offline calculations using Python scripts.The calibration coefficient of the system was determined using a commercial streak camera.Moreover,this technique was tested on two different storage rings and successfully captured various longitudinal transient processes during the harmonic cavity debugging process at the Shanghai Synchrotron Radiation Facility(SSRF),and longitudinal instabilities were observed during the single-bunch accumulation process at Hefei Light Source(HLS).For Gaussian-distribution bunches,the uncertainty of the bunch phase obtained using this technique was better than 0.2 ps,and the bunch-length uncertainty was better than 1 ps.The dynamic range exceeded 10 ms.This technology is a powerful and versatile beam diagnostic tool that can be conveniently deployed in high-energy electron storage rings.

Nonlinear Time History Analysis for the Different Column Orientations under Seismic Wave Synthetic Approach

The significant impact of earthquakes on human lives and the built environment underscores the extensive human and economic losses caused by structural collapses. Over the years, researchers have focused on improving seismic design to mitigate earthquake-induced damages and enhance structural performance. In this study, a specific reinforced concrete (RC) frame structure at Kyungpook National University, designed for educational purposes, is analyzed as a representative case. Utilizing SAP 2000, the research conducts a nonlinear time history analysis to assess the structural performance under seismic conditions. The primary objective is to evaluate the influence of different column section designs, while maintaining identical column section areas, on structural behavior. The study employs two distinct seismic waves from Abeno (ABN) and Takatori (TKT) for the analysis, comparing the structural performance under varying seismic conditions. Key aspects examined include displacement, base shear force, base moment, joint radians, and layer displacement angle. This research is anticipated to serve as a valuable reference for seismic restraint reinforcement work on RC buildings, enriching the methods used for evaluating structures through nonlinear time history analysis based on the synthetic seismic wave approach.

Feature extraction and damage alarming using time series analysis

Aiming at the problem of on-line damage diagnosis in structural health monitoring （SHM）, an algorithm of feature extraction and damage alarming based on auto-regressive moving-average （ARMA） time series analysis is presented. The monitoring data were first modeled as ARMA models, while a principalcomponent matrix derived from the AR coefficients of these models was utilized to establish the Mahalanobisdistance criterion functions. Then, a new damage-sensitive feature index DDSF is proposed. A hypothesis test involving the t-test method is further applied to obtain a decision of damage alarming as the mean value of DDSF had significantly changed after damage. The numerical results of a three-span-girder model shows that the defined index is sensitive to subtle structural damage, and the proposed algorithm can be applied to the on-line damage alarming in SHM.

A Cross-Reference Method for Nonlinear Time Series Analysis in Semi-Blind Case

In this paper, we propose a cross reference method for nonlinear time series analyzing in semi blind case, that is, the dynamic equations modeling the time series are known but the corresponding parameters are not. The tasks of noise reduction and parameter estimation which were fulfilled separately before are combined iteratively. With the positive interaction between the two processing modules, the method is somewhat superior. Some prior work can be viewed as special cases of this general framework. The simulations for noise reduction and parameter estimation of contaminated chaotic time series show improved performance of our method compared with previous work.

Gross errors identification and correction of in-vehicle MEMS gyroscope based on time series analysis

This paper presents a novel approach to identify and correct the gross errors in the microelectromechanical system （MEMS） gyroscope used in ground vehicles by means of time series analysis. According to the characteristics of autocorrelation function （ACF） and partial autocorrelation function （PACF）, an autoregressive integrated moving average （ARIMA） model is roughly constructed. The rough model is optimized by combining with Akaike＇s information criterion （A/C）, and the parameters are estimated based on the least squares algorithm. After validation testing, the model is utilized to forecast the next output on the basis of the previous measurement. When the difference between the measurement and its prediction exceeds the defined threshold, the measurement is identified as a gross error and remedied by its prediction. A case study on the yaw rate is performed to illustrate the developed algorithm. Experimental results demonstrate that the proposed approach can effectively distinguish gross errors and make some reasonable remedies.

Species distribution of polymeric aluminium ferrum——timed complexation colorimetric analysis method of Al-Fe-Ferron

The effects of the calorimetric buffer solutions were investigated while the two colorimetric reactions of AI-ferron complex and Fe-ferron complex occurred individually, and the effects of the testing wavelength and the pH of the solutions were also investigated. A timed complexatian colorimetric analysis method of Al-Fe-ferron in view of the total concentration of {AI + Fe} was then established to determine the species distribution of polymeric Al-Fe. The testing wavelength was recommended at 362 net and the testing pH value was 5. With a comparison of the ratios of n(Al)/n(Fe), the standard adsorption curves of the polymeric Al-Fe solutions were derived from the experimental results. Furthermore, the solutions' composition were carious in both the molar n(Al)/n(Fe) ratios, i.e. 0/0, 5/5, 9/1 and 0/10, and the concentrations associated with the total ( Al + Fe which ranged from 10(-5) to 10(-4) mol/L..

Time Series and Spatial Epidemiological Analysis of the Prevalence of Iodine Deficiency Disorders in China

Objective To recognize the spatial and temporal characteristics of iodine deficiency disorders(IDD),China national IDD surveillance data for the years of 1995–2018 were analyzed.Methods Time series analysis was used to describe and predict the IDD related indicators,and spatial analysis was used to analyze the spatial distribution of salt iodine levels.Results In China,the median urinary iodine concentration increased in 1995–1997,then decreased to adequate levels,and are expected to remain appropriate in 2019–2022.The goiter rate continually decreased and is expected to be maintained at a low level.Since 2002,the coverage rates of iodized salt and the consumption rates of qualified iodized salt(the percentage of qualified iodized salt in all tested salt) increased and began to decline in 2012;they are expected to continue to decrease.Spatial epidemiological analysis indicated a positive spatial correlation in 2016–2018 and revealed feature regarding the spatial distribution of salt related indicators in coastal areas and areas near iodine-excess areas.Conclusions Iodine nutrition in China showed gradual improvements.However,a recent decline has been observed in some areas following changes in the iodized salt supply in China.In the future,more regulations regarding salt management should be issued to strengthen IDD control and prevention measures,and avoid the recurrence of IDD.

Time-series analysis with a hybrid Box-Jenkins ARIMA

Time-series analysis is important to a wide range of disciplines transcending both the physical and social sciences for proactive policy decisions. Statistical models have sound theoretical basis and have been successfully used in a number of problem domains in time series forecasting. Due to power and flexibility, Box-Jenkins ARIMA model has gained enormous popularity in many areas and research practice for the last three decades. More recently, the neural networks have been shown to be a promising alternative tool for modeling and forecasting owing to their ability to capture the nonlinearity in the data. However, despite the popularity and the superiority of ARIMA and ANN models, the empirical forecasting performance has been rather mixed so that no single method is best in every situation. In this study, a hybrid ARIMA and neural networks model to time series forecasting is proposed. The basic idea behind the model combination is to use each model’s unique features to capture different patterns in the data. With three real data sets, empirical results evidently show that the hybrid model outperforms ARIMA and ANN model noticeably in terms of forecasting accuracy used in isolation.

Adaptive Fourier Decomposition Based Time-Frequency Analysis

The attempt to represent a signal simultaneously in time and frequency domains is full of challenges. The recently proposed adaptive Fourier decomposition （AFD） offers a practical approach to solve this problem. This paper presents the principles of the AFD based time-frequency analysis in three aspects： instantaneous frequency analysis, frequency spectrum analysis, and the spectrogram analysis. An experiment is conducted and compared with the Fourier transform in convergence rate and short-time Fourier transform in time-frequency distribution. The proposed approach performs better than both the Fourier transform and short-time Fourier transform.

Hydrodynamic characteristics of a typical karst spring system based on time series analysis in northern China

In order to study the hydrodynamic characteristics of the karst aquifers in northern China,time series analyses(correlation and spectral analysis in addition with hydrograph recession analysis)are applied on Baotu Spring and Heihu Spring in Jinan karst spring system,a typical karst spring system in northern China.Results show that the auto-correlation coefficient of spring water level reaches the value of 0.2 after 123 days and 117 days for Baotu Spring and Heihu Spring,respectively.The regulation time obtained from the simple spectral density function in the same period is 187 days and 175 days for Baotu Spring and Heihu Spring.The auto-correlation coefficient of spring water level reaches the value of 0.2 in 34-82 days,and regulation time ranges among 40-59 days for every single hydrological year.The delay time between precipitation and spring water level obtained from cross correlation function is around 56 days for the period of 2012-2019,and varies among 30-79 days for every single hydrological year.In addition,the spectral bands in cross amplitude functions and gain functions are small with 0.02,and the values in the coherence functions are small.All these behaviors illustrate that Jinan karst spring system has a strong memory effect,large storage capacity,noticeable regulation effect,and time series analysis is a useful tool for studying the hydrodynamic characteristics of karst spring system in northern China.

An Improved Time Domain Approach for Analysis of Floating Bridges Based on Dynamic Finite Element Method and State-Space Model

The floating bridge bears the dead weight and live load with buoyancy,and has wide application prospect in deep-water transportation infrastructure.The structural analysis of floating bridge is challenging due to the complicated fluid-solid coupling effects of wind and wave.In this research,a novel time domain approach combining dynamic finite element method and state-space model(SSM)is established for the refined analysis of floating bridges.The dynamic coupled effects induced by wave excitation load,radiation load and buffeting load are carefully simulated.High-precision fitted SSMs for pontoons are established to enhance the calculation efficiency of hydrodynamic radiation forces in time domain.The dispersion relation is also introduced in the analysis model to appropriately consider the phase differences of wave loads on pontoons.The proposed approach is then employed to simulate the dynamic responses of a scaled floating bridge model which has been tested under real wind and wave loads in laboratory.The numerical results are found to agree well with the test data regarding the structural responses of floating bridge under the considered environmental conditions.The proposed time domain approach is considered to be accurate and effective in simulating the structural behaviors of floating bridge under typical environmental conditions.

STUDY OF MACHINING PROCESS MONITORING OF FMS BASED ON TIME SERIES ANALYSIS

FMS is a sort of highly automatic machining system, how to ensure partquality is master key to system highly active running. At first, series of machining dimension andprocess capability of flexible manufacturing system(FMS), is analyzed. Result of its, strongself-correlation of data series shows that time series analysis is applicable to data seriesanalyzed. Based on-line modeling and forecasting for data series, principle and method of feedbackcompensation control is proposed. On a foundation of the virtual instrument platform, Labview ofnational instrument (NI), FMS dimension and process capability monitoring system(monitoring system)is developed. In practice, it is proved that part quality and process capability of FMS are greatlyimproved.

Comparison of Cox proportional hazards model,Cox proportional hazards with time-varying coefficients model,and lognormal accelerated failure time model:Application in time to event analysis of melioidosis patients

Objective:To compare the prognostic factors of mortality among melioidosis patients between lognormal accelerated failure time(AFT),Cox proportional hazards(PH),and Cox PH with time-varying coefficient(TVC)models.Methods:A retrospective study was conducted from 2014 to 2019 among 453 patients who were admitted to Hospital Sultanah Bahiyah,Kedah and Hospital Tuanku Fauziah,Perlis in Northern Malaysia due to confirmed-cultured melioidosis.The prognostic factors of mortality from melioidosis were obtained from AFT survival analysis,and Cox’s models and the findings were compared by using the goodness of fit methods.The analyses were done by using Stata SE version 14.0.Results:A total of 242 patients(53.4%)survived.In this study,the median survival time of melioidosis patients was 30.0 days(95%CI 0.0-60.9).Six significant prognostic factors were identified in the Cox PH model and Cox PH-TVC model.In AFT survival analysis,a total of seven significant prognostic factors were identified.The results were found to be only a slight difference between the identified prognostic factors among the models.AFT survival showed better results compared to Cox's models,with the lowest Akaike information criteria and best fitted Cox-snell residuals.Conclusions:AFT survival analysis provides more reliable results and can be used as an alternative statistical analysis for determining the prognostic factors of mortality in melioidosis patients in certain situations.

Seismic elastic-plastic time history analysis and reliability study of quayside container crane

Quayside container crane is a kind of huge dimension steel structure,which is the major equipment used for handling container at modern ports.With the aim to validate the safety and reliability of the crane under seismic loads,besides conventional analysis,elastic-plastic time history analysis under rare seismic intensity is carried out.An ideal finite element（FEM） elastic-plastic mechanical model of the quayside container crane is presented by using ANSYS codes.Furthermore,according to elastic-plastic time history analysis theory,deformation,stress and damage pattern of the structure under rare seismic intensity are investigated.Based on the above analysis,the established reliability model according to the reliability theory,together with seismic reliability analysis based on Monte-Carlo simulation is applied to practical analysis.The results show that the overall structure of the quayside container crane is generally unstable under rare seismic intensity,and the structure needs to be reinforced.

Dynamic Stability Analysis of Linear Time-varying Systems via an Extended Modal Identification Approach

The problem of linear time-varying（LTV） system modal analysis is considered based on time-dependent state space representations, as classical modal analysis of linear time-invariant systems and current LTV system modal analysis under the ＂frozen-time＂ assumption are not able to determine the dynamic stability of LTV systems. Time-dependent state space representations of LTV systems are first introduced, and the corresponding modal analysis theories are subsequently presented via a stabilitypreserving state transformation. The time-varying modes of LTV systems are extended in terms of uniqueness, and are further interpreted to determine the system＇s stability. An extended modal identification is proposed to estimate the time-varying modes, consisting of the estimation of the state transition matrix via a subspace-based method and the extraction of the time-varying modes by the QR decomposition. The proposed approach is numerically validated by three numerical cases, and is experimentally validated by a coupled moving-mass simply supported beam exper- imental case. The proposed approach is capable of accurately estimating the time-varying modes, and provides anew way to determine the dynamic stability of LTV systems by using the estimated time-varying modes.

Does Monetary Support Increase the Number of Scientific Papers？ An Interrupted Time Series Analysis

Purpose： One of the main indicators of scientific production is the number of papers published in scholarly journals. Turkey ranks 18th place in the world based on the number of scholarly publications. The objective of this paper is to find out if the monetary support program initiated in 1993 by the Turkish Scientific and Technological Research Council （TUBITAK） to incentivize researchers and increase the number, impact, and quality of international publications has been effective in doing so.Design/methodology/approach： We analyzed some 390,000 publications with Turkish affiliations listed in the Web of Science （WoS） database between 1976 and 2015 along with about 157,000 supported ones between 1997 and 2015. We used the interrupted time series （ITS） analysis technique （also known as ＂quasi-experimental time series analysis＂ or ＂intervention analysis＂） to test if TOBITAK＇s support program helped increase the number of publications. We defined ARIMA （1,1,0） model for ITS data and observed the impact of TOBiTAK＇s support program in 1994, 1997, and 2003 （after one, four and 10 years of its start, respectively）. The majority of publications （93%） were full papers （articles）, which were used as the experimental group while other types of contributions functioned as the control group. We also carried out a multiple regression analysis.Findings： TUBITAK＇s support program has had negligible effect on the increase of the number of papers with Turkish affiliations. Yet, the number of other types of contributions continued to increase even though they were not well supported, suggesting that TUBITAK＇s support program is probably not the main factor causing the increase in the number of papers with Turkish affiliations. Research limitations： Interrupted time series analysis shows if the ＂intervention＂ has had any significant effect on the dependent variable but it does not explain what caused the increase in the number of papers if it was not the intervention. Moreover, except the＂intervention＂, other ＂event（s）＂ that might affect the time series data （e.g., increase in the number of research personnel over the years） should not occur during the period of analysis, a prerequisite that is beyond the control of the researcher. Practical implications： TUBITAK＇s ＂cash-for-publication＂ program did not seem to have direct impact on the increase of the number of papers published by Turkish authors, suggesting that small amounts of payments are not much of an incentive for authors to publish more. It might perhaps be a better strategy to concentrate limited resources on a few high impact projects rather than to disperse them to thousands of authors as ＂micropayments.＂ Originality/value： Based on 25 years＇ worth of payments data, this is perhaps one of the first large-scale studies showing that ＂cash-for-publication＂ policies or ＂piece rates＂ paid to researchers tend to have little or no effect on the increase of researchers＇ productivity. The main finding of this paper has some implications for countries wherein publication subsidies are used as an incentive to increase the number and quality of papers published in international journals. They should be prepared to consider reviewing their existing support programs （based usually on bibliometric measures such as journal impact factors） and revising their reward policies.

Time series analysis-based seasonal autoregressive fractionally integrated moving average to estimate hepatitis B and C epidemics in China

BACKGROUND Hepatitis B(HB)and hepatitis C(HC)place the largest burden in China,and a goal of eliminating them as a major public health threat by 2030 has been set.Making more informed and accurate forecasts of their spread is essential for developing effective strategies,heightening the requirement for early warning to deal with such a major public health threat.AIM To monitor HB and HC epidemics by the design of a paradigmatic seasonal autoregressive fractionally integrated moving average(SARFIMA)for projections into 2030,and to compare the effectiveness with the seasonal autoregressive integrated moving average(SARIMA).METHODS Monthly HB and HC incidence cases in China were obtained from January 2004 to June 2023.Descriptive analysis and the Hodrick-Prescott method were employed to identify trends and seasonality.Two periods(from January 2004 to June 2022 and from January 2004 to December 2015,respectively)were used as the training sets to develop both models,while the remaining periods served as the test sets to evaluate the forecasting accuracy.RESULTS There were incidents of 23400874 HB cases and 3590867 HC cases from January 2004 to June 2023.Overall,HB remained steady[average annual percentage change(AAPC)=0.44,95%confidence interval(95%CI):-0.94-1.84]while HC was increasing(AAPC=8.91,95%CI:6.98-10.88),and both had a peak in March and a trough in February.In the 12-step-ahead HB forecast,the mean absolute deviation(15211.94),root mean square error(18762.94),mean absolute percentage error(0.17),mean error rate(0.15),and root mean square percentage error(0.25)under the best SARFIMA(3,0,0)(0,0.449,2)12 were smaller than those under the best SARIMA(3,0,0)(0,1,2)12(16867.71,20775.12,0.19,0.17,and 0.27,respectively).Similar results were also observed for the 90-step-ahead HB,12-step-ahead HC,and 90-step-ahead HC forecasts.The predicted HB incidents totaled 9865400(95%CI:7508093-12222709)cases and HC totaled 1659485(95%CI:856681-2462290)cases during 2023-2030.CONCLUSION Under current interventions,China faces enormous challenges to eliminate HB and HC epidemics by 2030,and effective strategies must be reinforced.The integration of SARFIMA into public health for the management of HB and HC epidemics can potentially result in more informed and efficient interventions,surpassing the capabilities of SARIMA.

Estimation of Concrete Arch Dams Responses in Linear Domain Using Endurance Time Analysis Method

In this paper, Endurance Time Analysis （ETA） method which is a new time-history based dynamic pushover procedure is introduced and its application in linear analysis of concrete arch dams is investigated. In this method the structure is subjected to gradually intensifying acceleration functions and its performance is evaluated based on the length of the time duration that can satisfy required performance criteria. For this purpose Dez arch dam is selected as case study, fluid-structure interaction is taken into account and F.E. model of the system is excited in three performance levels. ETA method gives an approximation of maximum response at the equivalent target time, resulted from analyzing the system based on natural records. Extracted results are displacement, velocity and acceleration of the crest at crown cantilever. Results show using of ETA method can reduce at least 50% in number of analyses and 70% in total time of analyses at the current case. Furthermore, it is found that although the results of the ETA are not exactly consistent with the results of time-history analyses using real ground motions, errors are reasonable and ETA can identify performance levels of the dam with acceptable accuracy.

Denoising Nonlinear Time Series Using Singular Spectrum Analysis and Fuzzy Entropy

We present a hybrid singular spectrum analysis （SSA） and fuzzy entropy method to filter noisy nonlinear time series. With this approach, SSA decomposes the noisy time series into its constituent components including both the deterministic behavior and noise, while fuzzy entropy automatically differentiates the optimal dominant components from the noise based on the complexity of each component. We demonstrate the effectiveness of the hybrid approach in reconstructing the Lorenz and Mackey--Class attractors, as well as improving the multi-step prediction quality of these two series in noisy environments.

Multivariate time delay analysis based local KPCA fault prognosis approach for nonlinear processes

Currently, some fault prognosis technology occasionally has relatively unsatisfied performance especially for in- cipient faults in nonlinear processes duo to their large time delay and complex internal connection. To overcome this deficiency, multivariate time delay analysis is incorporated into the high sensitive local kernel principal component analysis. In this approach, mutual information estimation and Bayesian information criterion （BIC） are separately used to acquire the correlation degree and time delay of the process variables. Moreover, in order to achieve prediction, time series prediction by back propagation （BP） network is applied whose input is multivar- iate correlated time series other than the original time series. Then the multivariate time delayed series and future values obtained by time series prediction are combined to construct the input of local kernel principal component analysis （LKPCA） model for incipient fault prognosis. The new method has been exemplified in a sim- ple nonlinear process and the complicated Tennessee Eastman （TE） benchmark process. The results indicate that the new method has suoerioritv in the fault prognosis sensitivity over other traditional fault prognosis methods.