The suitability assessment on site selection for bottom seeding scallop culture based on analytic hierarchy process

Scallop culture is an important way of bottom-seeding marine ranching,which is of great significance to improve the current situation of fishery resources.However,there are some problems in site-selection evaluation of marine ranching,such as imperfect criteria system,complex structure,untargeted criteria quantification,etc.In addition,no site-selection evaluation method of bottom-seeding culture areas for scallops is available.Therefore,we established a hierarchy structure model according to the analytic hierarchy process(AHP)theory,in which social,physical,chemical,and biological environments are used as main criteria,and marine functional zonation,water depth,current,water temperature,salinity,substrate type,water quality,sediment quality,red tide,phytoplankton,and zooplankton are used as sub-criteria,on which a multi-parameter evaluation system is set up.Meanwhile,the dualism method,assignment method,and membership function method were used to quantify sub-criteria,and a quantitative evaluation for the entire criteria was added,including the evaluation and analysis of two types of unsuitable environmental situations.By overall consideration in scallop yield,quality,and marine ranching construction objectives,the weight of the main criteria could be determined.Five grades in the suitability corresponding to the evaluation result were divided,and the Python language was used to create an evaluation system for efficient calculation and intuitive presentation of the evaluation outcome.Eight marine cases were simulated based on existing survey data,and the results prove that the method is feasible for evaluating and analyzing the site selection of bottom-seeding culture areas for scallops under various environmental situations.The proposed evaluation method can be promoted for the site selection of bottom-seeding marine ranching.This study provided theoretical and methodological references for the site selection evaluation of other types of marine ranching.

Analytic Hierarchy Process for Technological Risks in the Process of Innovative Drug Development in China

Objective To identify the critical risks in the process of innovative drug research and development,and to provide reference for improving the efficiency of innovative drug development and risk control in China.Methods Expert investigation and analytic hierarchy process were used to determine the weights of different risks.Results and Conclusion The research and analysis results showed that the risks at different stages of development had different effects on the success rate of drug development,among which the risk at the drug discovery stage influenced the most.In the drug discovery stage,inappropriate target selection had the greatest impact on the success rate of drug development.The lack of appropriate cell tissue or animal models had the greatest impact on the success rate of drug development from the discovery of a compound to the application for clinical trials.The difference in changes between nonclinical and clinical studies had the greatest impact on the success rate of drug development from early clinical studies to pivotal clinical studies.Incorrect dose selection had the greatest impact on the success rate of drug development from pivotal clinical studies to marketing authorization applications.The biggest impact from the marketing authorization application to the approval stage was inadequate communication with regulators.After investigating the weight of risk factors in the process of innovative drug development based on scientific methods,a new perspective for the risk control of new drug development and improving the research and development efficiency is provided.

Application of GIS based analytical hierarchy process and multicriteria decision analysis methods to identify groundwater potential zones in Jedeb Watershed, Ethiopia

The hydrogeological situation of the study area requires the identification of groundwater potential.Remote sensing and satellite data have proven to be reliable tools for understanding various factors that affect groundwater occurrence and movement.This study employed weighted overlay analysis based on satellite imagery and secondary data to create a thematic map for characterizing groundwater potentials in the study area located within Abbay Basin,Ethiopia.Remote sensing(RS)and GIS-based Fuzzy-Analytical Hierarchy Process methods were utilized to classify groundwater potential(GWP)zones into five categories:Very good,good,moderate,poor,and very poor.The central and eastern parts of the study area were identified as having high(33.186%)and very high(2.351%)groundwater potentials,while the western part exhibited poor and very poor potential areas.The groundwater potential map delineated higher and moderate potentials,suitable for installing shallow and production bores.This research demonstrates the effectiveness of RS and GIS techniques for delineating groundwater potential zones,which can aid in the planning and management of groundwater resources.The research findings have the potential to contribute to the formulation of improved groundwater management programs in the study area.

Landfill Site Suitability Assessment Using Geographic Information System (GIS) and Analytic Hierarchy Process (AHP) in Butuan City, Philippines

Landfilling is one of the most effective and responsible ways to dispose of municipal solid waste(MSW).Identifying landfill sites,however,is a challenging and complex undertaking because it depends on social,environmental,technical,economic,and legal issues.This study aims to map the optimal sites that were environmentally suitable for locating a landfill site in Butuan City,Philippines.With reference to the policy requirements from DENR Section I,Landfill Site Identification Criteria and Screening Guidelines of National Solid Waste Management Commission,the integration of a Geographic Information System(GIS)model builder and Analytical Hierarchy Process(AHP)has been used in this study to address the aforementioned challenges related to the landfill site suitability analysis.Based on the generated sanitary landfill suitability map,results showed that Barangay Tungao(1131.42967 ha)and Florida(518.48 ha)were able to meet and consider the three(3)main components,namely economic,environmental,and physical criteria,and are highly suit­able as landfill site locations in Butuan City.It is recommended that there will conduct a geotechnical evaluation,involv­ing rigorous geological and hydrogeological assessment employing a combination of site investigation and laboratory techniques.In addition,additional specific social,ecological,climatic,and economic factors need to be considered(i.e.including impact on humans,flora,fauna,soil,water,air,climate,and landscape).

Sustainability Assessment and Ranking of Run of the River(RoR) Hydropower Projects Using Analytical Hierarchy Process(AHP):A Study from Western Himalayan Region of India

In the present scenario,tapping the unutilised hydropower potential is one of the highest priorities in developing countries of the world.Special emphasis is being imparted to run of the river(RoR)mode of power generation.However,the governments are now facing the dilemma whether to promote small hydropower projects(SHPs) or encourage large hydropower projects(LHPs).RoR large hydropower projects result into large scale cutting of mountains for constructing tunnels and access roads,generation of huge quantity of muck and large scale impact on flora and fauna due to diversion of rivers/streams.On the other hand,though SHPs are claimed to be greener and more sustainable by a section of researchers and energy planners but,they will be required to be set up in large number to generate equivalent amount of electricity.The aim of this study is to rank the most sustainable installed capacity range of RoR hydropower projects.To achieve this aim,the study proposes the use of quite popular multi-criteria decision making(MCDM)method of Operation Research named Analytical Hierarchy Process.A case study has been presented from Himachal Pradesh,a hydro rich state located in the western Himalayan region.As per sustainability assessment carried out in this study,hydropower projects in the capacity range 1 to 5 MW have been ranked to be the most sustainable.

Assessment and Application of Beach Quality Based on Analytic Hierarchy Process in Yangkou Beach, Qingdao

The whole-beach quality assessment is the basis of building and preserving beautiful beaches.The beach quality assessment index system and assessment standard have been established based on the attributes of beaches(including the width,slope,landform,and types),sorting coefficient,and softness degree of surface sediment.The assessment weight of each index for quality evaluation was analyzed using the analytic hierarchy process,and comprehensive scores of selected beach profiles were calculated in accordance with the light assessment standard.A beach quality evaluation model based on index weight and scores was established in this paper.The factors of 12 profiles of Yangkou Beach in Qingdao City were surveyed to carry out a quality assessment,and the comprehensive scores of each profile were calculated in accordance with the evaluation model.The results showed that the quality of Yangkou Beach can be divided into four ratings:excellent,good,medium,and poor.The excellent-quality area includes a wide and flat dry beach zone and soft,flat,and clean intertidal and subtidal zones covered with well-sorted fine sand,and leisure sports,such as volleyball,running,and swimming,are suitable for tourists.The good-quality area features a slightly narrow and dry beach zone,moderately soft and uneven intertidal and subtidal zones covered with fine sand and a small tidal gully,and a small amount of foreign matter;leisure sports,such as walking and running,are suitable for tourists.This study recommends the building of fixed drainage ditches or underground culverts to reduce the tidal gully.The medium-quality area consisted of a narrow and dry beach zone,moderately soft and uneven intertidal and subtidal zones covered by poorly sorted medium sand,a tide ditch,and a small amount of foreign matter.In this area,walking is suitable for tourists.Sand should be supplemented in the intertidal zone.The poor-quality area contained a very narrow and dry beach zone covered with poor-sorted gravel,a very chaotic intertidal zone with a considerable amount of foreign matters,such as bricks and rocks,wide tidal ditches,and an uneven subtidal zone with some reefs;leisure sports are unsuitable here.Thus,foreign matter and reefs should be removed,and the dry beach zone should be supplemented with sand.Therefore,the beach quality assessment is a very useful tool for building beautiful beaches.

The Research on the Impact Factors of the Comprehensive Evaluation of Communication Unit Camps Based on Analytic Hierarchy Process

Currently, the comprehensive assessment of the communication troops’ camp planning project is primarily qualitative, with limited quantitative evaluation. Drawing upon the relevant spirit of the Military Commission’s documents and leveraging the author’s own work experience in branch offices, this article thoroughly explores the factors influencing the comprehensive assessment of the project and proposes quantitative representation methods for these factors. Utilizing the Analytic Hierarchy Process (AHP), a hierarchical structure model and judgment matrix for the evaluation factors of the communication troops’ camp construction planning project are constructed, enabling the determination of the weightage of each factor. This provides a certain level of support and reference for the project approval and management by branch offices, while also offering valuable insights for the approval and management of camp planning and construction projects in other types of troops and battlefield projects.

Seismic risk evaluation for a planning mountain tunnel using improved analytical hierarchy process based on extension theory

Seismic risk evaluation(SRE) in early stages(e.g., project planning and preliminary design)for a mountain tunnel located in seismic areas has the same importance as that in final stages(e.g.,performance-based design, structural analysis, and optimization). SRE for planning mountain tunnels bridges the gap between the planning on the macro level and the design/analysis on the micro level regarding the risk management of infrastructural systems. A transition from subjective or qualitative description to objective or quantitative quantification of seismic risk is aimed to improve the seismic behavior of the mountain tunnel and thus reduce the associated seismic risk. A new method of systematic SRE for the planning mountain tunnel was presented herein. The method employs extension theory(ET)and an ET-based improved analytical hierarchy process. Additionally, a new risk-classification criterion is proposed to classify and quantify the seismic risk for a planning mountain tunnel. This SRE method is applied to a mountain tunnel in southwest China, using the extension model based on matter element theory and dependent function operation.The reasonability and flexibility of the SRE method for application to the mountain tunnel are illustrated.According to different seismic risk levels and classification criteria, methods and measures for improving the seismic design are proposed, which can reduce the seismic risk and provide a frame of reference for elaborate seismic design.

Landslide susceptibility analysis of Karakoram highway using analytical hierarchy process and scoops 3D

Landslides are prevalent,regular,and expensive hazards in the Karakoram Highway(KKH)region.The KKH connects Pakistan with China in the present China-Pakistan Economic Corridor(CPEC)context.This region has not only immense economic importance but also ecological significance.The purpose of the study was to map the landslide-prone areas along KKH using two different techniquesAnalytical Hierarchy Process(AHP)and Scoops 3 D model.The causative parameters for running AHP include the lithology,presence of thrust,land use land cover,precipitation,and Digital Elevation Model(DEM)derived variables(slope,curvature,aspect,and elevation).The AHP derived final landslide susceptibility map was classified into four zones,i.e.,low,moderate,high,and extremely high.Over 80%of the study area falls under the moderate(43%)and high(40%)landslide susceptible zones.To assess the slope stability of the study area,the Scoops 3 D model was used by integrating with the earthquake loading data.The results of the limit equilibrium analysis categorized the area into four groups(low,moderate,high,and extremely high mass)of slope failure.The areas around Main Mantle Thrust(MMT)including Dubair,Jijal,and Kohistan regions,had high volumes of potential slope failures.The results from AHP and Scoops 3 D techniques were validated with the landslides inventory record of the Geological Survey of Pakistan and Google Earth.The results from both the techniques showed similar output that coincides with the known landslides areas.However,Scoops 3 D provides not only susceptible zones but also the range of volume of the potential slope failures.Further,these techniques could be used in other mountainous areas,which could help in the landslide mitigation measures.

GIS Based Landslide Susceptibility Mapping with Application of Analytical Hierarchy Process in District Ghizer, Gilgit Baltistan Pakistan

District Ghizer is a rugged mountainous territory which experiences several landslides each year. There are 16 major landslide areas and 53 villages that are at high risk to hazards. Keeping in view the severity of natural hazards, the present study was designed to generate landslide susceptibility map based on twelve causative factors viz., slope, aspect, elevation, drainage network, Stream Power Index (SPI), Topographic Wetness Index (TWI), lithological units, fault lines, rainfall, road network, land cover and soil texture. Soil texture was determined by particle size analysis and data for other factors were acquired from freely available sources. Analytical Hierarchy Process (AHP) was employed to identify major landslide causative factors in the district Ghizer. Further, a temporal assessment from 1999 till 2015 was generated to assess the impact of land cover change on landslides. It indicated that the barren soil/ exposed rocks and glaciers have reduced while the vegetation and water classes have shown increment. The total area that lies in moderate to very high landslide susceptible zones was 74.38%, while slope is the main landslide causative factor in the district Ghizer. Validation of the susceptibility map showed 88.1% of the landslides in the study area had occurred in the moderate to very high susceptible zones.

Mapping favorable groundwater potential recharge zones using a GIS-based analytical hierarchical process and probability frequency ratio model:A case study from an agro-urban region of Pakistan

In Punjab(Pakistan),the increasing population and expansion of land use for agriculture have severely exploited the regional groundwater resources.Intensive pumping has resulted in a rapid decline in the level of the water table as well as its quality.Better management practices and artificial recharge are needed for the development of sustainable groundwater resources.This study proposes a methodology to delineate favorable groundwater potential recharge zones(FPRI)by integrating maps of groundwater potential recharge index(PRI)with the DRASTIC-based groundwater vulnerability index(VI).In order to evaluate both indexes,different thematic layers corresponding to each index were overlaid in ArcGIS.In the overlay analysis,the weights(for various thematic layers)and rating values(for sub-classes)were allocated based on a review of published literature.Both were then normalized and modified using the analytical hierarchical process(AHP)and a frequency ratio model respectively.After evaluating PRI and FPRI,these maps were validated using the area under the curve(AUC)method.The PRI map indicates that 53%of the area assessed exists in very low to low recharge zones,22%in moderate,and 25%in high to excellent potential recharge zones.The VI map indicates that 38%of the area assessed exists in very low to low vulnerability,33%in moderate,and 29%in high to very high vulnerability zones.The FPRI map shows that the central region of Punjab is moderately-to-highly favorable for recharge due to its low vulnerability and high recharge potential.During the validation process,it was found that the AUC estimated with modified weights and rating values was 79%and 67%,for PRI and VI indexes,respectively.The AUC was less when evaluated using original weights and rating values taken from published literature.Maps of favorable groundwater potential recharge zones are helpful for planning and implementation of wells and hydraulic structures in this region.

Evaluation of Rainwater Harvesting Methods and Structures Using Analytical Hierarchy Process for a Large Scale Industrial Area

In India, with ever increasing population and stress on natural resources, especially water, rejuvenation of rainwater harvesting (RWH) technique which was forgotten over the days is becoming very essential. Large number of RWH methods that are available in the literature are demand specific and site specific, since RWH system depends on the topography, land use, land cover, rainfall and demand pattern. Thus for each and every case, a detailed evaluation of RWH structures is required for implementation, including the analy-sis of hydrology, topography and other aspects like site availability and economics, however a common methodology could be evolved. The present study was aimed at evaluation of various RWH techniques in order to identify the most appropriate technique suitable for a large scale industrial area to meet its daily wa-ter demand. An attempt is made to determine the volume of water to be stored using mass balance method, Ripple diagram method, analytical method, and sequent peak algorithm method. Based on various satisfying criteria, analytical hierarchy process (AHP) is employed to determine the most appropriate type of RWH method and required number of RWH structures in the study area. If economy alone is considered along with hydrological and site specific parameters, recharging the aquifer has resulted as a better choice. However other criteria namely risk, satisfaction in obtaining required volume of water for immediate utilization etc. has resulted in opting for concrete storage structures method. From the results it is found that AHP, if used with all possible criteria can result in a better tool for evaluation of RWH methods and structures. This RWH structures not only meets the demand but saves transportation cost of water and reduces the dependability of the industry on irrigation reservoir. Besides monetary benefits it is hoped that the micro environment inside the industry will improve due to the cooling effect of the stored water.

Hazard assessment of landslide disaster using information value method and analytical hierarchy process in highly tectonic Chamba region in bosom of Himalaya

The present study is focused on a comparative evaluation of landslide disaster using analytical hierarchy process and information value method for hazard assessment in highly tectonic Chamba region in bosom of Himalaya. During study, the information about the causative factors was generated and the landslide hazard zonation maps were delineated using Information Value Method(IV) and Analytical Hierarchy Process(AHP) using Arc GIS(ESRI). For this purpose, the study area was selected in a part of Ravi river catchment along one of the landslide prone Chamba to Bharmour road corridor of National Highway(NH^(-1)54 A) in Himachal Pradesh, India. A numeral landslide triggering geoenvironmental factors i.e. slope, aspect, relative relief, soil, curvature, land use and land cover(LULC), lithology, drainage density, and lineament density were selected for landslide hazard mapping based on landslide inventory. Landslide hazard zonation map was categorized namely "very high hazard, high hazard, medium hazard, low hazard, and very low hazard". The results from these two methods were validated using Area Under Curve(AUC) plots. It is found that hazard zonation map prepared using information value method and analytical hierarchy process methods possess the prediction rate of 78.87% and 75.42%, respectively. Hence, landslide hazardzonation map obtained using information value method is proposed to be more useful for the study area. These final hazard zonation maps can be used by various stakeholders like engineers and administrators for proper maintenance and smooth traffic flow between Chamba and Bharmour cities, which is the only route connecting these tourist places.

Material selection of polymeric composite automotive bumper beam using analytical hierarchy process

Selection of materials,as an area of design research,has been under considerable interest over the years.Materials selection is one of the most important activities in the product development process.Inappropriate decision of materials can cause the product to be reproduced or remanufactured.To avoid this circumstance,one of the useful tools that can be employed in determining the most appropriate material is analytical hierarchy process(AHP).To illustrate the application of AHP,six different types of composite materials were considered.The most appropriate one for suitability of use in manufacturing automotive bumper beam was determined by considering eight main selection factors and 12 sub-factors.The AHP analysis reveals that the glass fibre epoxy is the most appropriate material because it has the highest value(25.7%,mass fraction) compared with other materials.The final material is obtained by performing six different scenarios of the sensitivity analysis.It is proved that glass fibre epoxy is the most optimum decision.

A Genetic Fuzzy Analytical Hierarchy Process Based Projection Pursuit Method for Selecting Schemes of Water Transportation Projects

The optimal selection of schemes of water transportation projects is a process of choosing a relatively optimal scheme from a number of schemes of water transportation programming and management projects, which is of importance in both theory and practice in water resource systems engineering. In order to achieve consistency and eliminate the dimensions of fuzzy qualitative and fuzzy quantitative evaluation indexes, to determine the weights of the indexes objectively, and to increase the differences among the comprehensive evaluation index values of water transportation project schemes, a projection pursuit method, named FPRM-PP for short, was developed in this work for selecting the optimal water transportation project scheme based on the fuzzy preference relation matrix. The research results show that FPRM-PP is intuitive and practical, the correction range of the fuzzy preference relation matrix [WTHX]A[WT] it produces is relatively small, and the result obtained is both stable and accurate; therefore FPRM-PP can be widely used in the optimal selection of different multi-factor decision-making schemes.

The Multiplicative Analytic Hierarchy Process (MIAHP) as a Quality Criterion Determining the Technological Value of the Egyptian Cotton Varieties

This study was undertaken to develop a numerical process that can be used as a quality criterion to determine the technological value of the Egyptian cotton varieties, which in turn would denote the end-use of their fibers. However the material used in the study comprised the 6 Egyptian cotton varieties Giza70, Giza80, Giza86, Giza88, Giza90 and Giza92. According to the local practice in Egypt, Giza70, Giza88 and Giza92 belong to the Extra-Long Staple (ELS) category, while Giza80, Giza86 and Giza90 are included under the Long Staple (LS) category. The regression analysis of the relationships between fiber properties and yarn skein strength (lea product) of the 2 carded ring counts 40 and 50 Ne, was employed to drive an equation for calculating the Multiplicative Analytic Hierarchy Process (MIAHP) values. The values of the MIAHP have been used as numerical determinations of the technological values of the Egyptian cotton varieties. Nevertheless, the findings of this study clarified that with respect to the criteria weights, the pair-wise comparisons denoted that fiber length properties of Egyptian cotton ranked first where they revealed the most dominant effect on yarn strength, while tensile properties ranked second with a relative weight close to that of fiber length. On the contrary, the relative weight of fiber fineness (micronaire reading) was found to be marginal. With regard to the relative weight of sub-criterion, the pair-wise comparisons indicated that the role of fiber tenacity as a determinant of yarn strength is much superior to that of fiber elongation. Further the global weights of the sub-criterion of fiber length pointed out that the UHML (upper half mean length) plays an important role in determining yarn strength of the Egyptian cotton comparing with either the UI (uniformity index) or the SFC (short fiber content). In conformity with the values of the MIAHP, it was found that in the order of descending rank, Giza88 ranked first, followed by Giza92, Giza70, Giza86, Giza80 and finally Giza90.

Using the Analytical Hierarchy Process Model in the Prioritization of Information Assurance Defense In-Depth Measures?—A Quantitative Study

Organizational computing devices are increasingly becoming targets of cyber-attacks, and organizations have become dependent on the safety and security of their computer networks and their organizational computing devices. Business and government often use defense in-depth information assurance measures such as firewalls, intrusion detection systems, and password procedures across their enterprises to plan strategically and manage IT security risks. This quantitative study explores whether the analytical hierarchy process (AHP) model can be effectively applied to the prioritization of information assurance defense in-depth measures. In response to these threats, the President, legislators, experts, and others have characterized cyber security as a pressing national security issue. The methods used in this study consisted of emailing study participants a survey requesting that they prioritize five defense in-depth information assurance measures, anti-virus, intrusion detection, password, smart-cards, and encryption, with a range of responses from 1 - 5 using a Likert scale to consider standard cost, effectiveness, and perceived ease of use in terms of protection of organizational computing devices. The measures were then weighted, based on ranking. A pair-wise comparison of each of the five measures is then made using AHP to determine whether the Likert scale and the AHP model could be effectively applied to the prioritization of information assurance measures to protect organizational computing devices. The findings of the research reject the H0 null hypothesis that AHP does not affect the relationship between the information technology analysts’ prioritization of five defense in-depth dependent variables and the independent variables of cost, ease of use, and effectiveness in protecting organizational devices against cyber-attacks.

Evaluation of Environmental Sound Pressure Level,Drawing of Noise-Isosonic Map Using Surfer V.19,and Prioritization of Engineering Noise Control Methods Using the Analytic Hierarchy Process(AHP):A Field Study in CGS Stations

Noise pollution is one of the most significant harmful physical factors in the industrial and occupational environments.Due to the high costs of exposure to excessive noise;continuous sound evaluation,propose and implement noise control plans in occupational environments is necessary.Thus,the present study aimed to review environmental sound measurements,drawing of noise maps,and prioritizing the engineering noise control methods using the Analytic Hierarchy Process(AHP).This study was a descriptive-analytical study that aimed to assess occupational noises and present a control plan in the City Gas Stations(CGSs)of Kerman,Iran in 2021.The present study was done in two phases.In the first phase,six CGSs were investigated to measure and evaluate the noise.In addition,the noise map of a CGS was drawn using the Surfer software.Finally,the AHP was used in the second phase of the research to prioritize the control measures.In this phase,four criteria and ten alternatives were identified.According to first phase results,the sound pressure level(SPL)of the stations varied from 76 to 98 dBA.Besides,the majority of the studied stations had a sound level higher than 85 dBA(danger zone).The second phase of the study showed that out of the four evaluated criteria,the executability criterion had the highest impact and the cost criterion had the lowest impact on the selection of control measures with a weight of 0.587 and 0.052,respectively.Based on the results of prioritization of the alternatives,using a silenced regulator(weight of 0.223)and increasing the thickness of the tube(weight of 0.023)had the highest and lowest priorities among the alternatives,respectively.The use of engineering noise control methods such as using silenced regulators was the best way to control the noises of CGSs.Additionally;it is noteworthy that AHP is a practical method for prioritizing alternatives to achieve the most accurate decision-making.The results of AHP can be of great help to health and safety experts and managers in choosing the sound engineering control measures more precisely.