Application of monodispersive anion exchangers in sorption and separation of Y^3＋ from Nd^3＋ and Sm^3＋ complexes with dcta

Rare earth complexes with trans-1,2-diaminocyclohexane-N,N,N ,N -tetraacetic acid （DCTA） of the Ln（dcta） type exhibited an unusual sequence of affinity on the polystyrene anion exchangers： pm^3＋〉Nd^3＋〉Sm^3＋〉Pr^3＋〉Ce^3＋〉Eu^3＋〉Gd^3＋〉La^3＋〉Sc^3＋〉Tb^3＋〉Dy^3＋〉 Ho^3＋〉Y^3＋〉Er^3＋〉Tm^3＋〉Yb3＋〉Lu^3＋[1]. Taking into account the position of Y^3＋, Sm^3＋, and Nd^3＋ in this affinity series, for the monodispersive polystyrene anion exchangers, Lewatit MonoPlus M 500, Lewatit MonoPlus M 600, Lewatit MonoPlus MP 500, Lewatit MonoPlus MP 64, and for the heterodispersive anion exchanger, Lewatit MP 62, the weight （Dg） and bed （Dv） distribution coefficients of these complexes and working ion exchange capacities （Cw） were determined. Based on these values, purifications of Y^3＋ from Nd^3＋ and Y^3＋ from Sm^3＋ in the macro-micro component system on these anion exchangers were studied. The application potential of this method was highlighted for the separation of Y^3＋ in the presence of Nd^3＋ and Sm^3＋. With 1 L of monodispersive and strongly basic polystyrene gel anion exchanger Lewatit MonoPlus M 500 in the acetate form, it is possible to obtain approximately 79 g Y2O3 purified from Nd2O3 and 70 g Y2O3 purified from Sm2O3 in the same process condition.

Development of advanced anion exchange membrane from the view of the performance of water electrolysis cell

Green hydrogen produced by water electrolysis combined with renewable energy is a promising alternative to fossil fuels due to its high energy density with zero-carbon emissions.Among water electrolysis technologies,the anion exchange membrane(AEM) water electrolysis has gained intensive attention and is considered as the next-generation emerging technology due to its potential advantages,such as the use of low-cost non-noble metal catalysts,the relatively mature stack assembly process,etc.However,the AEM water electrolyzer is still in the early development stage of the kW-level stack,which is mainly attributed to severe performance decay caused by the core component,i.e.,AEM.Here,the review comprehensively presents the recent progress of advanced AEM from the view of the performance of water electrolysis cells.Herein,fundamental principles and critical components of AEM water electrolyzers are introduced,and work conditions of AEM water electrolyzers and AEM performance improvement strategies are discussed.The challenges and perspectives are also analyzed.

Durable poly(binaphthyl-co-p-terphenyl piperidinium)-based anion exchange membranes with dual side chains

Building well-developed ion-conductive highways is highly desirable for anion exchange membranes(AEMs).Grafting side chain is a highly effective approach for constructing a well-defined phaseseparated morphological structure and forming unblocked ion pathways in AEMs for fast ion transport.Fluorination of side chains can further enhance phase separation due to the superhydrophobic nature of fluorine groups.However,their electronic effect on the alkaline stability of side chains and membranes is rarely reported.Here,fluorine-containing and fluorine-free side chains are introduced into the polyaromatic backbone in proper configuration to investigate the impact of the fluorine terminal group on the stability of the side chains and membrane properties.The poly(binaphthyl-co-p-terphenyl piperidinium)AEM(QBNp TP)has the highest molecular weight and most dimensional stability due to its favorable backbone arrangement among ortho-and meta-terphenyl based AEMs.Importantly,by introducing both a fluorinated piperidinium side chain and a hexane chain into the p-terphenyl-based backbone,the prepared AEM(QBNp TP-QFC)presents an enhanced conductivity(150.6 m S cm^(-1))and a constrained swelling at 80℃.The electronic effect of fluorinated side chains is contemplated by experiments and simulations.The results demonstrate that the presence of strong electro-withdrawing fluorine groups weakens the electronic cloud of adjacent C atoms,increasing OH^(-)attack on the C atom and improving the stability of piperidinium cations.Hence QBNp TP-QFC possesses a robust alkaline stability at 80℃(95.3%conductivity retention after testing in 2 M Na OH for 2160 h).An excellent peak power density of 1.44 W cm^(-2)and a remarkable durability at 80℃(4.5%voltage loss after 100 h)can be observed.

Towards high-performance and robust anion exchange membranes(AEMs)for water electrolysis:Super-acid-catalyzed synthesis of AEMs

The increasing demand for hydrogen energy to address environmental issues and achieve carbon neutrality has elevated interest in green hydrogen production,which does not rely on fossil fuels.Among various hydrogen production technologies,anion exchange membrane water electrolyzer(AEMWE)has emerged as a next-generation technology known for its high hydrogen production efficiency and its ability to use non-metal catalysts.However,this technology faces significant challenges,particularly in terms of the membrane durability and low ionic conductivity.To address these challenges,research efforts have focused on developing membranes with a new backbone structure and anion exchange groups to enhance durability and ionic conductivity.Notably,the super-acid-catalyzed condensation(SACC)synthesis method stands out due to its user convenience,the ability to create high molecular weight(MW)polymers,and the use of oxygen-tolerant organic catalysts.Although the synthesis of anion exchange membranes(AEMs)using the SACC method began in 2015,and despite growing interest in this synthesis approach,there remains a scarcity of review papers focusing on AEMs synthesized using the SACC method.The review covers the basics of SACC synthesis,presents various polymers synthesized using this method,and summarizes the development of these polymers,particularly their building blocks including aryl,ketone,and anion exchange groups.We systematically describe the effects of changes in the molecular structure of each polymer component,conducted by various research groups,on the mechanical properties,conductivity,and operational stability of the membrane.This review will provide insights into the development of AEMs with superior performance and operational stability suitable for water electrolysis applications.

Electrochemical reconstruction of non-noble metal-based heterostructure nanorod arrays electrodes for highly stable anion exchange membrane seawater electrolysis

Direct seawater electrolysis for hydrogen production has been regarded as a viable route to utilize surplus renewable energy and address the climate crisis.However,the harsh electrochemical environment of seawater,particularly the presence of aggressive Cl^(-),has been proven to be prone to parasitic chloride ion oxidation and corrosion reactions,thus restricting seawater electrolyzer lifetime.Herein,hierarchical structure(Ni,Fe)O(OH)@NiCoS nanorod arrays(NAs)catalysts with heterointerfaces and localized oxygen vacancies were synthesized at nickel foam substrates via the combination of hydrothermal and annealing methods to boost seawater dissociation.The hiera rchical nanostructure of NiCoS NAs enhanced electrode charge transfer rate and active surface area to accelerate oxygen evolution reaction(OER)and generated sulfate gradient layers to repulsive aggressive Cl^(-).The fabricated heterostructure and vacancies of(Ni,Fe)O(OH)tuned catalyst electronic structure into an electrophilic state to enhance the binding affinity of hydroxyl intermediates and facilitate the structural transformation into amorphousγ-NiFeOOH for promoting OER.Furthermore,through operando electrochemistry techniques,we found that theγ-NiFeOOH possessing an unsaturated coordination environment and lattice-oxygen-participated OER mechanism can minimize electrode Cl^(-)corrosion enabled by stabilizing the adsorption of OH*intermediates,making it one of the best OER catalysts in the seawater medium reported to date.Consequently,these catalysts can deliver current densities of 100 and 500 mA cm-2for boosting OER at minimal overpotentials of 245and 316 mV,respectively,and thus prevent chloride ion oxidation simultaneously.Impressively,a highly stable anion exchange membrane(AEM)seawater electrolyzer based on the non-noble metal heterostructure electrodes reached a record low degradation rate under 100μV h-1at constant industrial current densities of 400 and 600 mA cm-2over 300 h,which exhibits a promising future for the nonprecious and stable AEMWE in the direct seawater electrolysis industry.

Electrochemical synthesis of trimetallic nickel-iron-copper nanoparticles via potential-cycling for high current density anion exchange membrane water-splitting applications

Hydrogen is known for its elevated energy density and environmental compatibility and is a promising alternative to fossil fuels.Alkaline water electrolysis utilizing renewable energy sources has emerged as a means to obtain high-purity hydrogen.Nevertheless,electrocatalysts used in the process are fabricated using conventional wet chemical synthesis methods,such as sol-gel,hydrothermal,or surfactantassisted approaches,which often necessitate intricate pretreatment procedures and are vulnerable to post-treatment contamination.Therefore,this study introduces a streamlined and environmentally conscious one-step potential-cycling approach to generate a highly efficient trimetallic nickel-iron-copper electrocatalyst in situ on nickel foam.The synthesized material exhibited remarkable performance,requiring a mere 476 mV to drive electrochemical water splitting at 100 mA cm^(-2)current density in alkaline solution.Furthermore,this material was integrated into an anion exchange membrane watersplitting device and achieved an exceptionally high current density of 1 A cm^(-2)at a low cell voltage of2.13 V,outperforming the noble-metal benchmark(2.51 V).Additionally,ex situ characterizations were employed to detect transformations in the active sites during the catalytic process,revealing the structural transformations and providing inspiration for further design of electrocatalysts.

Investigation of Polyacrylate Anion-Exchangers for Separation of Rare Earth Element Complexes with EDTA

The rare earth complexes with EDTA, Ln(edta), show an unusual sequence of affinity for the anion exchangers. The sorption and chromatographic separation of Y 3+ for Nd 3+ complexes with EDTA was studied by using the strongly basic gel and macroporous polyacrylate anion exchangers, Amberlite IRA 458 and Amberlite 958, and the weakly basic gel polyacrylate anion exchanger, Amberlite IRA 68. The investigations on sorption and separation of rare earth complexes with EDTA on the polyacrylate anion exchangers applied mainly in the environment protection so far indicate that they can be applied in anionexchange separation of lanthanide complexes with aminopolycarboxylic acids. It was shown that the weakly basic polyacrylate gel anion exchanger Amberlite IRA 68 is the most effective in purification of Y 3+ from Nd 3+ in comparison with the strongly basic anion exchangers of this type.

Technical factors affecting the performance of anion exchange membrane water electrolyzer

Anion exchange membrane(AEM)electrolysis is a promising membrane-based green hydrogen production technology.However,AEM electrolysis still remains in its infancy,and the performance of AEM electrolyzers is far behind that of well-developed alkaline and proton exchange membrane electrolyzers.Therefore,breaking through the technical barriers of AEM electrolyzers is critical.On the basis of the analysis of the electrochemical performance tested in a single cell,electrochemical impedance spectroscopy,and the number of active sites,we evaluated the main technical factors that affect AEM electrolyzers.These factors included catalyst layer manufacturing(e.g.,catalyst,carbon black,and anionic ionomer)loadings,membrane electrode assembly,and testing conditions(e.g.,the KOH concentration in the electrolyte,electrolyte feeding mode,and operating temperature).The underlying mechanisms of the effects of these factors on AEM electrolyzer performance were also revealed.The irreversible voltage loss in the AEM electrolyzer was concluded to be mainly associated with the kinetics of the electrode reaction and the transport of electrons,ions,and gas-phase products involved in electrolysis.Based on the study results,the performance and stability of AEM electrolyzers were significantly improved.

Poly(Ionic Liquid) as an Anion Exchange Membrane for a 3.3 V Copper–Lithium Battery

Metal–metal battery bears great potential for next-generation large-scale energy storage system because of its simple manufacture process and low production cost.However,the cross-over of metal cations from the cathode to the anode causes a loss in capacity and influences battery stability.Herein,a coating of poly(ionic liquid)(PIL)with poly(diallyldimethylammonium bis(trifluoromethanesulfonyl)imide)(PDADMA^(+)TFSI^(−))on a commercial polypropylene(PP)separator serves as an anion exchange membrane for a 3.3 V copper–lithium battery.The PIL has a positively charged polymer backbone that can block the migration of copper ions,thus improving Coulombic efficiency,long-term cycling stability and inhibiting self-discharge of the battery.It can also facilitate the conduction of anions through the membrane and reduce polarization,especially for fast charging/discharging.Bruce-Vincent method gives the transport number in the electrolyte to be 0.25 and 0.04 for PP separator without and with PIL coating,respectively.This suggests that the PIL layer reduces the contribution of the internal current due to cation transport.The use of PIL as a coating layer for commercial PP separator is a cost-effective way to improve overall electrochemical performance of copper–lithium batteries.Compared to PP and polyacrylic acid(PAA)/PP separators,the PIL/PP membrane raises the Coulombic efficiency to 99%and decreases the average discharge voltage drop to about 0.09 V when the current density is increased from 0.1 to 1 mA cm^(−2).

Chemical Oxidation Effects on Anion Exchange and Nitrate Sorption Capacity of Biochar for Ruminal Methanogenesis Inhibition

The chemical composition of biochar is determined by the chemical profile of the material the by-product is made of and the pyrolysis conditions. Analysis of commercial biochar detected similarities to the chemical profile of hardwood, which was used as an object of pyrolysis for biochar production and showed the presence of bridge-forming cations, such as manganese, iron, and sodium. Despite frequently being reported in existing literature, the current study showed that the redox potential of biochar is not associated with biochar’s ability to recover certain anions. No association was detected between biochar’s redox potential and the material nitrate sorption capacity. In fact, higher redox potential values were associated with lower nitrate absorption. In the case of the anion exchange capacity of biochar, a direct association between this electrochemical property of the by-product and its redox potential was observed. However, redox potential’s impact on anion exchange capacity can be inhibited by the presence of organic compounds in biochar’s chemical profile. The chemical oxidation of biochar is a complex process and is a research priority for a potential role to mitigate enteric methanogenesis in livestock.

Internal Polarization Field Induced Hydroxyl Spillover Effect for Industrial Water Splitting Electrolyzers

The formation of multiple oxygen intermediates supporting efficient oxygen evolution reaction(OER)are affinitive with hydroxyl adsorption.However,ability of the catalyst to capture hydroxyl and maintain the continuous supply at active sits remains a tremendous challenge.Herein,an affordable Ni2P/FeP2 heterostructure is presented to form the internal polarization field(IPF),arising hydroxyl spillover(HOSo)during OER.Facilitated by IPF,the oriented HOSo from FeP2 to Ni2P can activate the Ni site with a new hydroxyl transmission channel and build the optimized reaction path of oxygen intermediates for lower adsorption energy,boosting the OER activity(242 mV vs.RHE at 100 mA cm-2)for least 100 h.More interestingly,for the anion exchange membrane water electrolyzer(AEMWE)with low concentration electrolyte,the advantage of HOSo effect is significantly amplified,delivering 1 A cm^(-2)at a low cell voltage of 1.88 V with excellent stability for over 50 h.

Ternary layered double hydroxide oxygen evolution reaction electrocatalyst for anion exchange membrane alkaline seawater electrolysis

Anion exchange membrane(AEM)water electrolyzers are promising energy devices for the production of clean hydrogen from seawater.However,the lack of active and robust electrocatalysts for the oxygen evolution reaction(OER)severely impedes the development of this technology.In this study,a ternary layered double hydroxide(LDH)OER electrocatalyst(NiFeCo-LDH)is developed for high-performance AEM alkaline seawater electrolyzers.The AEM alkaline seawater electrolyzer catalyzed by the NiFeCo LDH shows high seawater electrolysis performance(0.84 A/cm^(2)at 1.7 Vcell)and high hydrogen production efficiency(77.6%at 0.5 A/cm^(2)),thus outperforming an electrolyzer catalyzed by a benchmark IrO_(2)electrocatalyst.The NiFeCo-LDH electrocatalyst greatly improves the kinetics of the AEM alkaline seawater electrolyzer,consequently reducing its activation loss and leading to high performance.Based on the results,this NiFeCo-LDH-catalyzed AEM alkaline seawater electrolyzer can likely surpass the energy conversion targets of the US Department of Energy.

THERMODYNAMIC STUDY ON ADSORPTION OF AROMATIC SULFONIC ACIDS ONTO MACROPOROUS WEAK BASE ANION EXCHANGER FROM AQUEOUS SOLUTIONS

The adsorption equilibrium isotherms of three aromatic sulfonic acid compounds, 2-naphthalenesulfonic acid, p-toluenesulfonic acid and p-chlorobenzenesulfonic acid, from aqueous solutions by macroporous weak base anion exchanger within the temperature range of 293 K-313 K were obtained. Several isotherm equations were correlated with the equilibrium data, and the experimental data was found to fit the three-parameter Redlich-Peterson equation best within the entire range of concentrations. The study showed that the hydrophobicity of solute has distinct influence on adsorption capacity of the anion exchanger for the aromatic sulfonic acid. Moreover, estimations of the isosteric enthalpy, free energy, and entropy change of adsorption were also reported. The positive isosteric enthalpy and entropy change for adsorption indicate an endothermic and entropy driven process in the present study.

Synthesis and Characterization of Two Binuclear Macrocyclic Zinc(Ⅱ) Complexes by Anion Exchange

Two macrocyclic zinc（Ⅱ） complexes {[ZnL（VO3）2]·0.33H2O}n（1） and [ZnL（H2O）2][Ni（CN）4]（2）（L = 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane） have been obtained from the reactions of [ZnL]（ClO4）2 with NH4VO3 and K2[Ni（CN）4], respectively, and structurally characterized by elemental analysis, IR, XRPD, TG and X-ray diffraction. Single-crystal X-ray diffraction analyses indicated that the Zn（Ⅱ） atom lies on an inversion center and is octahedrally coordinated by four nitrogen atoms of the tetradentate macrocyclic ligand in the equatorial plane and two oxygen atoms of [VO4] tetrahedra in the axial positions in 1, and two oxygen atoms of two water molecules in 2. Complex 1 shows a three-dimensional structure, which is constructed by the links of [VO3]nn- chains with [ZnL]2＋, forming one-dimensional channels occupied by guest water molecules. The monomers of [ZnL（H2O）2]2＋ and [Ni（CN）4]2- are connected through the intermolecular hydrogen bonds to form a two-dimensional sheet in complex 2.

A more precise method to evaluate kinetic leakage of anion exchange resin used in condensate polishing of power plant

Sulfate mass transfer coefficient(MTC) is a sensitive parameter to evaluate the kinetic leakage of anion exchange resin used in condensate polishing system of thermal and nuclear power plant.However,a sufficiently precise determination method has not been well established.In this paper,the final expression of sulfate MTC derived based on plug flow reactor model is the same as Harries' model,which is widely acknowledged in this field.In the determining system we constructed,in-situ calibration of the concentration of sulfate and its cation conductivity was conducted and sulfate MTCs of four typical strongly basic anion exchange resin samples were determined.The systematic error is 8.26% and the calibrated curve used for quantifying sulfate is obtained.The repeatability and reproducibility standard deviation are 0.05×10^(-4) m·s^(-1) and 0.07×10^(-4) m·s^(-1) respectively,which are lower than previous works.By controlling test condition accurately,this study has developed a more precise sulfate MTC determining method.This method provides a basis for further research.

Semi-interpenetrating network anion exchange membranes based on quaternized polyvinyl alcohol/poly(diallyldimethylammonium chloride)

The semi-interpenetrating network anion exchange membranes(AEMs)based on quaternized polyvinyl alcohol(QPVA)and poly(-diallyldimethylammonium chloride)(PDDA)are synthesized.The chemical cross-linking structure is formed between hydroxyl groups of QPVA and aldehyde groups of glutaraldehyde(GA),which makes PDDA more stable embed in the QPVA matrix and also improves the mechanical properties and dimensional stability of AEMs.Due to the phase separation phenomenon of AEMs swelling in water,a microporous structure may be formed in the membrane,which reduces the transmission resistance of hydroxide ions and provides a larger space for the transfer of hydroxide ions,thus improving the conductivity.The ring structure of PDDA is introduced as a cationic group to transfer hydroxide ions,and shields the nucleophilic attack of the hydroxide ions through the steric hindrance effect,which improves alkaline stability.The hydroxide conductivity of semi-interpenetrating network membrane(QPVA/PDDA0.5-GA)is 36.5 mS cm^(-1) at 60℃.And the membrane of QPVA/PDDA0.5-GA exhibits excellent mechanical property with maximum tensile strength of 19.6 MPa.After immersing into hot 3 mol L^(-1) NaOH solutions at 60℃ for 300 h,the OHconductivity remains 78%of its initial value.The semi-interpenetrating network AEMs with microporous structure exhibit good ionic conductivity,mechanical strength and alkaline durability.

Expression and Purification of Hydrophilic Domains of Bovine Anion Exchanger,Member 1 and Electrogenic Sodium Bicarbonate Cotransporter 1

[ Objective] To express and purify the intracellular hydrophilic domains of bovine membrane carrier proteins：anion exchanger, member 1 （AE1） and electregenic sodium bicarbonate cotransporter 1 （NBCel）, which were associated with bicarbonate ion transport. [ Method] The hydrophilic domains of bovine AE1 and NBCel were amplified by PCR and inserted into the prokaryotic expression vector pET-28a, respectively. The recombinant plasmids were transformed into the expression strain E. coli BL21 （DE3） and then induced by IPTG. The expressed proteins were purified by nickel ion affinity chromatography and analyzed by 15% SDS-PAGE. [Result] The hydrophilic domains of bovine AE1 and NBCel were amplified respectively by PCR and expressed by prokaryotic expression system with the induction of IPTG. They were mainly expressed in the cyto- plasm of E. coli and high-purity was achieved by nickel ion affinity chromatography. [Condusion] The expression of the hydrophilic domains of bovine AE1 and NBCel provides a major exit route for preparation of antibodies and the regulatory mechanisms of carrier proteins.

New insights into the pathogenesis of primary biliary cholangitis asymptomatic stage

Primary biliary cholangitis(PBC)is a chronic cholestatic progressive liver disease and one of the most important progressive cholangiopathies in adults.Damage to cholangiocytes triggers the development of intrahepatic cholestasis,which progresses to cirrhosis in the terminal stage of the disease.Accumulating data indicate that damage to biliary epithelial cells[(BECs),cholangiocytes]is most likely associated with the intracellular accumulation of bile acids,which have potent detergent properties and damaging effects on cell membranes.The mechanisms underlying uncontrolled bile acid intake into BECs in PBC are associated with pH change in the bile duct lumen,which is controlled by the bicarbonate(HCO3-)buffer system“biliary HCO3-umbrella”.The impaired production and entry of HCO3-from BECs into the bile duct lumen is due to epigenetic changes in expression of the X-linked microRNA 506.Based on the growing body of knowledge on the molecular mechanisms of cholangiocyte damage in patients with PBC,we propose a hypothesis explaining the pathogenesis of the first morphologic(ductulopenia),immunologic(antimitochondrial autoantibodies)and clinical(weakness,malaise,rapid fatigue)signs of the disease in the asymptomatic stage.This review focuses on the consideration of these mechanisms.

High-precision nondestructive evaluation of a thermal barrier coating based on perovskite quantum dot anion exchange

Thermal barrier coatings(TBCs)in gas turbine engines are used in expressly harsh environments;thus,assessing TBC integrity status is critical for safety and reliability.However,traditional periodic maintenance involves visual inspections of the TBCs,requiring the gas turbine to be decommissioned and partially dismantled.Most importantly,tiny defects or internal damages that easily cause coating failure cannot be identified.In this work,a new nondestructive evaluation(NDE)technique of TBCs based on quantum dot(QD)anion exchange is first explored internationally.By exchanging anions between the Cl ions and the CsPbBr_(3) QDs,the degrees of salt corrosion of the TBCs are evaluated.The resultant NDE technique shows that the colour of the TBCs obviously changes from green to blue,accompanied by a large blueshift(~100 nm)of the photoluminescence(PL)peak position.In addition,the relationship between the PL peak position and coating thermophysical properties indicates that the precision of this NDE technique may easily identify theμm-level of the thermal growth oxide(TGO)changes inside the TBCs.