This study introduces a new design of planar antenna array for ISM band applications at 2.4 GHz. This prototype is switched beam antenna, namely planar antenna with four meandered slotted triangular elements (PAFMSTE)...This study introduces a new design of planar antenna array for ISM band applications at 2.4 GHz. This prototype is switched beam antenna, namely planar antenna with four meandered slotted triangular elements (PAFMSTE), which is proposed for wireless indoor applications. The Base Station (BS) equipped with this planar antenna is preferred to be at the center position on the room ceiling to cover all sectors of the room. It is designed to use four directional triangular elements arranged to form a square planar antenna array. The PAFMSTE is used to obtain optimal directivity in four directions in azimuth plane with 3 dB beamwidth of 90°at a specific orientation of 30°in elevation plane. Switched parasitic technique is used to enable PAFMSTE to steer a directional beam through four locations by using four PIN diodes switches. The High Frequency Structure Simulator (HFSS) is used as an efficient simulation tool to optimize the performance of the PAFMSTE antenna. The fabrication and measurements of the PAFMSTE antenna are introduced. The proposed antenna enable radio positioning via Angle of Arrival (AOA) information collected from nearby devices. Then, the Cramér-Rao Bound (CRB) is presented for AOA estimation using identically and equally spaced antenna elements. The CRB depends on the directivity, where the maximum values of CRB are 1.35 × 10<sup>-3</sup> and 8 × 10<sup>-3</sup> at HPBW of 60° and 90°, respectively.展开更多
The complexity of the indoor environment brings great challenges to predict the electromagnetic radiation field of multiple antenna systems. Based on the Finite Difference Time Domain (FDTD) algorithm, using the mobil...The complexity of the indoor environment brings great challenges to predict the electromagnetic radiation field of multiple antenna systems. Based on the Finite Difference Time Domain (FDTD) algorithm, using the mobile phone shielding device as the multiple antenna systems example, the mobile phone shielding device's indoor electromagnetic radiation field is researched by measurment method and simulation method. The effectivity of prediction method is verified by comparing the prediciton results with the measurment results. About 80% of the error can be controlled less than dB. The quantitative research has certain guiding significance to the prediction of the multiple antenna systems radio wave propagation.展开更多
This paper presents a dual-band planar antenna array for ISM band applications (2.4 GHz and 2.45 GHz). This antenna is proposed for indoor applications and enables adaptive beamforming and angle of arrival (AOA) estim...This paper presents a dual-band planar antenna array for ISM band applications (2.4 GHz and 2.45 GHz). This antenna is proposed for indoor applications and enables adaptive beamforming and angle of arrival (AOA) estimation. An adaptive beamforming algorithm is applied for a planar antenna array, which is able to steer its main beam and nulls in azimuth and elevation planes over a wide frequency band. Planar antenna array operates as a spatial filter in 3D space, processing the received signals with weighting schemes. A planar antenna array is designed for AOA estimation in azimuth and elevation planes by using MUltiple SIgnal Classification (MUSIC) based on subspace algorithm. The Base Station (BS) equipped with this planar antenna is preferred to be at the center position on the room ceiling to cover all sectors of the room. It is designed to use four directional triangular elements arranged to form a square planar antenna array. Planar antenna with four elliptical slotted triangular elements (PAFESTE) is used to obtain optimal directivity in four directions in azimuth plane with specific orientation of 30? in elevation plane. It is characterized by half power beamwidth in elevation plane of about 60? and half power beamwidth in azimuth plane of about 90?.展开更多
为更好地仿真与分析三维空间域室内外蜂窝移动通信环境,提出3D几何统计信道模型。推导并分析该信道模型的诸多概率密度函数(probability density functions,PDFs)表达式、信号到达角(angle of arrival,AOA)分布特性;研究基站(base stati...为更好地仿真与分析三维空间域室内外蜂窝移动通信环境,提出3D几何统计信道模型。推导并分析该信道模型的诸多概率密度函数(probability density functions,PDFs)表达式、信号到达角(angle of arrival,AOA)分布特性;研究基站(base station,BS)处使用指向性天线对散射信道特征的影响。信道模型分析中假设传输信号的多径分量仅经历一次反射,若移动台(mobile station,MS)周围的散射体被视为高斯分布和指数分布的密度模型,更易于仿真室内和室外蜂窝环境。数值仿真结果表明,与3D多径衰落信道模型相比,该模型的信道参数估计结果符合理论和经验,拓展了3D空间统计信道模型的研究和应用。展开更多
文摘This study introduces a new design of planar antenna array for ISM band applications at 2.4 GHz. This prototype is switched beam antenna, namely planar antenna with four meandered slotted triangular elements (PAFMSTE), which is proposed for wireless indoor applications. The Base Station (BS) equipped with this planar antenna is preferred to be at the center position on the room ceiling to cover all sectors of the room. It is designed to use four directional triangular elements arranged to form a square planar antenna array. The PAFMSTE is used to obtain optimal directivity in four directions in azimuth plane with 3 dB beamwidth of 90°at a specific orientation of 30°in elevation plane. Switched parasitic technique is used to enable PAFMSTE to steer a directional beam through four locations by using four PIN diodes switches. The High Frequency Structure Simulator (HFSS) is used as an efficient simulation tool to optimize the performance of the PAFMSTE antenna. The fabrication and measurements of the PAFMSTE antenna are introduced. The proposed antenna enable radio positioning via Angle of Arrival (AOA) information collected from nearby devices. Then, the Cramér-Rao Bound (CRB) is presented for AOA estimation using identically and equally spaced antenna elements. The CRB depends on the directivity, where the maximum values of CRB are 1.35 × 10<sup>-3</sup> and 8 × 10<sup>-3</sup> at HPBW of 60° and 90°, respectively.
基金Supported by the State Environmental Protection Commonweal Industry Research Special of China (No.200909106)
文摘The complexity of the indoor environment brings great challenges to predict the electromagnetic radiation field of multiple antenna systems. Based on the Finite Difference Time Domain (FDTD) algorithm, using the mobile phone shielding device as the multiple antenna systems example, the mobile phone shielding device's indoor electromagnetic radiation field is researched by measurment method and simulation method. The effectivity of prediction method is verified by comparing the prediciton results with the measurment results. About 80% of the error can be controlled less than dB. The quantitative research has certain guiding significance to the prediction of the multiple antenna systems radio wave propagation.
文摘This paper presents a dual-band planar antenna array for ISM band applications (2.4 GHz and 2.45 GHz). This antenna is proposed for indoor applications and enables adaptive beamforming and angle of arrival (AOA) estimation. An adaptive beamforming algorithm is applied for a planar antenna array, which is able to steer its main beam and nulls in azimuth and elevation planes over a wide frequency band. Planar antenna array operates as a spatial filter in 3D space, processing the received signals with weighting schemes. A planar antenna array is designed for AOA estimation in azimuth and elevation planes by using MUltiple SIgnal Classification (MUSIC) based on subspace algorithm. The Base Station (BS) equipped with this planar antenna is preferred to be at the center position on the room ceiling to cover all sectors of the room. It is designed to use four directional triangular elements arranged to form a square planar antenna array. Planar antenna with four elliptical slotted triangular elements (PAFESTE) is used to obtain optimal directivity in four directions in azimuth plane with specific orientation of 30? in elevation plane. It is characterized by half power beamwidth in elevation plane of about 60? and half power beamwidth in azimuth plane of about 90?.
文摘为更好地仿真与分析三维空间域室内外蜂窝移动通信环境,提出3D几何统计信道模型。推导并分析该信道模型的诸多概率密度函数(probability density functions,PDFs)表达式、信号到达角(angle of arrival,AOA)分布特性;研究基站(base station,BS)处使用指向性天线对散射信道特征的影响。信道模型分析中假设传输信号的多径分量仅经历一次反射,若移动台(mobile station,MS)周围的散射体被视为高斯分布和指数分布的密度模型,更易于仿真室内和室外蜂窝环境。数值仿真结果表明,与3D多径衰落信道模型相比,该模型的信道参数估计结果符合理论和经验,拓展了3D空间统计信道模型的研究和应用。
