Space-borne antenna adaptive anti-jamming method based on gradient-genetic algorithm

A novel space-borne antenna adaptive anti-jamming method based on the genetic algorithm （GA）, which is combined with gradient-like reproduction operators is presented, to search for the best weight for pattern synthesis in radio frequency （RF）. Combined, the GA＇s the capability of the whole searching is, but not limited by selection of the initial parameter, with the gradient algorithm＇s advantage of fast searching. The proposed method requires a smaller sized initial population and lower computational complexity. Therefore, it is flexible to implement this method in the real-time systems. By using the proposed algorithm, the designer can efficiently control both main-lobe shaping and side-lobe level. Simulation results based on the spot survey data show that the algorithm proposed is efficient and feasible.

Beidou receiver based on anti-jamming antenna arrays with self-calibration for precise relative positioning

Unmanned aerial vehicles(UAVs)may be subjected to unintentional radio frequency interference(RFI)or hostile jamming attack which will lead to fail to track global navigation satellite system(GNSS)signals.Therefore,the simultaneous realization of anti-jamming and high-precision carrier phase difference positioning becomes a dilemmatic problem.In this paper,a distortionless phase digital beamforming(DBF)algorithm with self-calibration antenna arrays is proposed,which enables to obtain distortionless carrier phase while suppressing jamming.Additionally,architecture of high precision Beidou receiver based on anti-jamming antenna arrays is proposed.Finally,the performance of the algorithm is evaluated,including antenna calibration accuracy,carrier phase distortionless accuracy,and carrier phase measurement accuracy without jamming.Meanwhile,the maximal jamming to signal ratio(JSR)and real time kinematic(RTK)positioning accuracy under wideband jamming are also investigated.The experimental results based on the real-life Beidou signals show that the proposed method has an excellent performance for precise relative positioning under jamming when compared with other anti-jamming methods.

Anti-Jamming Null Space Projection Beamforming Based on Symbiotic Radio

With the development of information technology,more and more devices are connected to the Internet through wireless communication to complete data interconnection.Due to the broadcast characteristics ofwireless channels,wireless networks have suffered more and more malicious attacks.Physical layer security has received extensive attention from industry and academia.MIMO is considered to be one of the most important technologies related to physical layer security.Through beamforming technology,messages can be transmitted to legitimate users in an offset direction that is as orthogonal as possible to the interference channel to ensure the reception SINR by legitimate users.Combining the symbiotic radio(SR)technology,this paper considers a symbiotic radio antijamming MIMO system equipped with a multi-antenna system at the main base station.In order to avoid the interference signal and improve the SINR of the signal received by the user.The base station is equipped with a uniform rectangular antenna array,and using Null Space Projection(NSP)Beamforming,Intelligent Reflecting Surface(IRS)can assist in changing the beam’s angle.The simulation results show that NSP Beamforming could make a better use of the null space of interference,which can effectively improve the received SINR of users under directional interference,and improve the utilization efficiency of signal energy.

Insight Into the Separation-of-Variable Methods for the Closed-Form Solutions of Free Vibration of Rectangular Thin Plates

The separation-of-variable(SOV)methods,such as the improved SOV method,the variational SOV method,and the extended SOV method,have been proposed by the present authors and coworkers to obtain the closed-form analytical solutions for free vibration and eigenbuckling of rectangular plates and circular cylindrical shells.By taking the free vibration of rectangular thin plates as an example,this work presents the theoretical framework of the SOV methods in an instructive way,and the bisection–based solution procedures for a group of nonlinear eigenvalue equations.Besides,the explicit equations of nodal lines of the SOV methods are presented,and the relations of nodal line patterns and frequency orders are investigated.It is concluded that the highly accurate SOV methods have the same accuracy for all frequencies,the mode shapes about repeated frequencies can also be precisely captured,and the SOV methods do not have the problem of missing roots as well.

Structural Modal Parameter Recognition and Related Damage Identification Methods under Environmental Excitations: A Review

Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the structure.Therefore,it is particularly significant to identify the structural modal parameters according to the monitoring data information in the structural health monitoring(SHM)system,so as to provide a scientific basis for structural damage identification and dynamic model modification.In view of this,this paper reviews methods for identifying structural modal parameters under environmental excitation and briefly describes how to identify structural damages based on the derived modal parameters.The paper primarily introduces data-driven modal parameter recognition methods(e.g.,time-domain,frequency-domain,and time-frequency-domain methods,etc.),briefly describes damage identification methods based on the variations of modal parameters(e.g.,natural frequency,modal shapes,and curvature modal shapes,etc.)and modal validation methods(e.g.,Stability Diagram and Modal Assurance Criterion,etc.).The current status of the application of artificial intelligence(AI)methods in the direction of modal parameter recognition and damage identification is further discussed.Based on the pre-vious analysis,the main development trends of structural modal parameter recognition and damage identification methods are given to provide scientific references for the optimized design and functional upgrading of SHM systems.

Studies on Novel Anti-jamming Technique of Unmanned Aerial Vehicle Data Link

Based on the M-ary spread spectrum （M-ary-SS）, direct sequence spread spectrum （DS-SS）, and orthogonal frequency division multiplex （OFDM）, a novel anti-jamming scheme, named orthogonal code time division multi-subchannels spread spectrum modulation （OC-TDMSCSSM）, is proposed to enhance the anti-jamming ability of the unmanned aerial vehicle （UAV） data link. The anti-jamming system with its mathematical model is presented first, and then the signal formats of transmitter and receiver are derived. The receiver＇s bit error rate （BER） is demonstrated and anti-jamming performance analysis is carded out in an additive white Ganssian noise （AWGN） channel. Theoretical research and simulation results show the anti-jamming performance of the proposed scheme better than that of the hybrid direct sequence frequency hopping spread spectrum （DS/FH SS） system. The jamming margin of the OC-TDMSCSSM system is 5 dB higher than that of DS/FH SS system under the condition of Rician channel and full-band jamming, and 6 dB higher under the condition of Rician channel environment and partial-band jamming.

GNSS array receiver faced with overloaded interferences:anti-jamming performance and the incident directions of interferences

Anti-jamming solutions based on antenna arrays enhance the anti-jamming ability and the robustness of global navigation satellite system(GNSS)receiver remarkably.However,the performance of the receiver will deteriorate significantly in the overloaded interferences scenario.We define the overloaded interferences scenario as where the number of interferences is more than or equal to the number of antenna arrays elements.In this paper,the effect mechanism of interferences with different incident directions is found by studying the anti-jamming performance of the adaptive space filter.The theoretical analysis and conclusions,which are first validated through numerical examples,reveal the relationships between the optimal weight vector and the eigenvectors of the input signal autocorrelation matrix,the relationships between the interference cancellation ratio(ICR),the signal to interference and noise power ratio(SINR)of the adaptive space filter output and the number of interferences,the eigenvalues of the input signal autocorrelation matrix.In addition,two simulation experiments are utilized to further corroborate the theoretical findings through soft anti-jamming receiver.The simulation results match well with the theoretical analysis results,thus validating the effect mechanism of overloaded interferences.The simulation results show that,for a four elements circular array,the performance difference is up to 19 dB with different incident directions of interferences.Anti-jamming performance evaluation and jamming deployment optimization can obtain more accurate and efficient results by using the conclusions.

An Active Anti-Jamming Approach for Frequency Diverse Array Radar with Adaptive Weights

Due to the rapid development of electronic countermeasures(ECMs),the corresponding means of electronic counter countermeasures(ECCMs)are urgently needed.In this paper,an act-ive anti-jamming method based on frequency diverse array radar is proposed.By deriving the closed form of the phase center in a uniform line array FDA,we establish a model of the FDA signal based on adaptive weights and derive the effect of active anti-jamming in this regime.The pro-posed active anti-jamming method makes it difficult for jammers to detect or locate our radar.Fur-thermore,the effectiveness of the two frequency increment schemes in terms of anti-jamming is ana-lyzed by comparing the deviation of phase center.Finally,the simulation results verify the effective-ness and superiority of the proposed method.

Put Others Before Itself:A Multi-Leader One-Follower Anti-Jamming Stackelberg Game Against Tracking Jammer

This paper mainly investigates the coordinated anti-jamming channel access problems in multiuser scenarios where there exists a tracking jammer who senses the spectrum and traces the channel with maximal receiving power.To cope with the challenges brought by the tracking jammer,a multi-leader onefollower anti-jamming Stackelberg(MOAS)game is formulated,which is able to model the complex interactions between users and the tracking jammer.In the proposed game,users act as leaders,chose their channel access strategies and transmit firstly.The tracking jammer acts as the follower,whose objective is to find the optimal jamming strategy at each time slot.Besides,the existence of Stackelberg equilibriums(SEs)is proved,which means users reach Nash Equilibriums(NEs)for each jamming strategy while the jammer finds its best response jamming strategy for the current network access case.An active attraction based anti-jamming channel access(3ACA)algorithm is designed to reach SEs,where jammed users keep their channel access strategies unchanged to create access chances for other users.To enhance the fairness of the system,users will adjust their strategies and relearn after certain time slots to provide access chances for those users who sacrifice themselves to attract the tracking jammer.

Throughput Analysis of Dynamic Spectrum Anti-Jamming Multiple-Access in HF Communication Systems

A multiple-access networking scheme based on the new dynamic spectrum anti-jamming system is proposed in this paper. The network consists of a center node and multiple user nodes. The center node detects spectrum holes in the operation band periodically according to the user performance target. Detected spectrum holes are allocated to users who request communication. Throughput of this networking scheme is analyzed over a high-frequency(HF) interference channel. The effect of error correction coding and spectrum hole information transmission error is discussed. Throughput of this scheme and conventional frequency-hopping multiple-access(FHMA) scheme are compared. Results show that user performance increase leads to throughput decrease, which can be offset by error correction coding. If spectrum hole information transmission is in error, the throughput is not affected much as long as the bit error rate is below 10-2. Furthermore, throughput of this scheme is obviously superior to the throughput of FHMA scheme.

Cognitive anti-jamming receiver under phase noise in high frequency bands

This paper investigates the jamming sensing performance of the simultaneous transmit and receive based cognitive anti-jamming(SCAJ) receiver impaired by phase noise in local oscillators(LO) over fading channels. Firstly, energy detection(ED)based on the jamming to noise ratio(JNR) of the high frequency bands SCAJ receiver with phase noise under different channels is analyzed. Then, the probabilities of jamming detection and false alarm in closed-form for the SCAJ receiver are derived. Finally,the modified Bayesian Cramer-Rao bound(BCRB) of jamming sensing for the SCAJ receiver is presented. Simulation results show that the performance degradation of the SCAJ system due to phase noise is more severe than that due to the channel fading in the circumstances where the signal bandwidth(BW) is kept a constant. Moreover, the signal BW has an effect on the phase noise in LO, and the jamming detection probability of the wideband SCAJ receiver with lower phase noise outperforms that of the narrowband receiver using the same center frequency. Furthermore,an accurate phase noise estimation and compensation scheme can improve the jamming detection capability of the SCAJ receiver in high frequency bands and approach to the upper bound.

Combined algorithm of acquisition and anti-jamming based on SFT

A communication and navigation receiver is required to remove hostile jamming signals and synchronize receiving signals effectively especially for satellite communication and navigation whose resources are becoming more and more limited. This paper proposes a novel signal receiving method by combining the pro- cesses of anti-jamming and synchronization to reduce the overall computationa~ complexity at the expense of slightly affecting the detection probability, which is analyzed in detail by derivations. Furthermore, this paper introduces sparse Fourier transformation （SFT） into the proposed algorithm to replace fast Fourier transfor- mation （FFT） so as to further reduce the calculation time especially in large frequency offset environments.

Anti-Jamming Algorithm Based on Spatial Blind Search for Global Navigation Satellite System Receiver

A novel subspace projection anti-jamming algorithm based on spatial blind search is proposed,which uses multiple single-constrained subspace projection parallel filters.If the direction of arrival(DOA)of a satellite signal is unknown,the traditional subspace projection anti-jamming algorithm cannot form the correct beam pointing.To overcome the problem of the traditional subspace projection algorithm,multiple single-constrained subspace projection parallel filters are used.Every single-constrained anti-jamming subspace projection algorithm obtains the optimal weight vector by searching the DOA of the satellite signal and uses the output of cross correlation as a decision criterion.Test results show that the algorithm can suppress the jamming effectively,and generate high gain toward the desired signal.The research provides a new idea for the engineering implementation of a multi-beam anti-jamming algorithm based on subspace projection.

A Review on Sources,Extractions and Analysis Methods of a Sustainable Biomaterial:Tannins

Condensed and hydrolysable tannins are non-toxic natural polyphenols that are a commercial commodity industrialized for tanning hides to obtain leather and for a growing number of other industrial applications mainly to substitute petroleum-based products.They are a definite class of sustainable materials of the forestry industry.They have been in operation for hundreds of years to manufacture leather and now for a growing number of applications in a variety of other industries,such as wood adhesives,metal coating,pharmaceutical/medical applications and several others.This review presents the main sources,either already or potentially commercial of this forestry by-materials,their industrial and laboratory extraction systems,their systems of analysis with their advantages and drawbacks,be these methods so simple to even appear primitive but nonetheless of proven effectiveness,or very modern and instrumental.It constitutes a basic but essential summary of what is necessary to know of these sustainable materials.In doing so,the review highlights some of the main challenges that remain to be addressed to deliver the quality and economics of tannin supply necessary to fulfill the industrial production requirements for some materials-based uses.

Dynamic Spectrum Anti-Jamming with Distributed Learning and Transfer Learning

Physical-layer security issues in wireless systems have attracted great attention.In this paper,we investigate the spectrum anti-jamming(AJ)problem for data transmissions between devices.Considering fast-changing physical-layer jamming attacks in the time/frequency domain,frequency resources have to be configured for devices in advance with unknown jamming patterns(i.e.the time-frequency distribution of the jamming signals)to avoid jamming signals emitted by malicious devices.This process can be formulated as a Markov decision process and solved by reinforcement learning(RL).Unfortunately,stateof-the-art RL methods may put pressure on the system which has limited computing resources.As a result,we propose a novel RL,by integrating the asynchronous advantage actor-critic(A3C)approach with the kernel method to learn a flexible frequency pre-configuration policy.Moreover,in the presence of time-varying jamming patterns,the traditional AJ strategy can not adapt to the dynamic interference strategy.To handle this issue,we design a kernelbased feature transfer learning method to adjust the structure of the policy function online.Simulation results reveal that our proposed approach can significantly outperform various baselines,in terms of the average normalized throughput and the convergence speed of policy learning.

Anti-jamming channel access in 5G ultra-dense networks: a game-theoretic learning approach

This paper investigates the Quality of Experience(QoE)oriented channel access anti-jamming problem in 5th Generation Mobile Communication(5G)ultra-dense networks.Firstly,considering that the 5G base station adopts beamforming technology,an anti-jamming model under Space Division Multiple Access(SDMA)conditions is proposed.Secondly,the confrontational relationship between users and the jammer is formulated as a Stackelberg game.Besides,to achieve global optimization,we design a local cooperation mechanism for users and formulate the cooperation and competition among users as a local altruistic game.By proving that the local altruistic game is an Exact Potential Game(EPG),we further prove the existence of pure strategy Nash Equilibrium(NE)among users and Stackelberg Equilibrium(SE)between users and jammer.Thirdly,to obtain the equilibrium solutions of the proposed games,we propose an anti-jamming channel selection algorithm and improve its convergence speed through heterogeneous learning parameters.The simulation results validate the convergence and effectiveness of the proposed algorithm.Compared with the throughput optimization scheme,our proposed scheme obtain a greater network satisfaction rate.Finally,we also analyze user fairness changes during the algorithm convergence process and get some interesting conclusions.

Comparison of the Radar Receiver Anti-Jamming Circuits Performance

This paper researches on some key technologies of anti-jamming of an air-borne radar receiver, the automatic testing of AGC, IAGC and multi-filtering under one million noisy pulses by the computer simulation system. The system tests the width of the jamming pulse whose width is 100% bigger, 60% bigger and 100% smaller than the Radar signal’s respectively and show the SNR curve.

A comparison study on structure-function relationship of polysaccharides obtained from sea buckthorn berries using different methods:antioxidant and bile acid-binding capacity

In this study,the structural characters,antioxidant activities and bile acid-binding ability of sea buckthorn polysaccharides(HRPs)obtained by the commonly used hot water(HRP-W),pressurized hot water(HRP-H),ultrasonic(HRP-U),acid(HRP-C)and alkali(HRP-A)assisted extraction methods were investigated.The results demonstrated that extraction methods had significant effects on extraction yield,monosaccharide composition,molecular weight,particle size,triple-helical structure,and surface morphology of HRPs except for the major linkage bands.Thermogravimetric analysis showed that HRP-U with filamentous reticular microstructure exhibited better thermal stability.The HRP-A with the lowest molecular weight and highest arabinose content possessed the best antioxidant activities.Moreover,the rheological analysis indicated that HRPs with higher galacturonic acid content and molecular weight showed higher viscosity and stronger crosslinking network(HRP-C,HRP-W and HRP-U),which exhibited stronger bile acid binding capacity.The present findings provide scientific evidence in the preparation technology of sea buckthorn polysaccharides with good antioxidant and bile acid binding capacity which are related to the structure affected by the extraction methods.

Drilling-based measuring method for the c-φ parameter of rock and its field application

The technology of drilling tests makes it possible to obtain the strength parameter of rock accurately in situ. In this paper, a new rock cutting analysis model that considers the influence of the rock crushing zone(RCZ) is built. The formula for an ultimate cutting force is established based on the limit equilibrium principle. The relationship between digital drilling parameters(DDP) and the c-φ parameter(DDP-cφ formula, where c refers to the cohesion and φ refers to the internal friction angle) is derived, and the response of drilling parameters and cutting ratio to the strength parameters is analyzed. The drillingbased measuring method for the c-φ parameter of rock is constructed. The laboratory verification test is then completed, and the difference in results between the drilling test and the compression test is less than 6%. On this basis, in-situ rock drilling tests in a traffic tunnel and a coal mine roadway are carried out, and the strength parameters of the surrounding rock are effectively tested. The average difference ratio of the results is less than 11%, which verifies the effectiveness of the proposed method for obtaining the strength parameters based on digital drilling. This study provides methodological support for field testing of rock strength parameters.

Efficient slope reliability and sensitivity analysis using quantile-based first-order second-moment method

This paper introduces a novel approach for parameter sensitivity evaluation and efficient slope reliability analysis based on quantile-based first-order second-moment method(QFOSM).The core principles of the QFOSM are elucidated geometrically from the perspective of expanding ellipsoids.Based on this geometric interpretation,the QFOSM is further extended to estimate sensitivity indices and assess the significance of various uncertain parameters involved in the slope system.The proposed method has the advantage of computational simplicity,akin to the conventional first-order second-moment method(FOSM),while providing estimation accuracy close to that of the first-order reliability method(FORM).Its performance is demonstrated with a numerical example and three slope examples.The results show that the proposed method can efficiently estimate the slope reliability and simultaneously evaluate the sensitivity of the uncertain parameters.The proposed method does not involve complex optimization or iteration required by the FORM.It can provide a valuable complement to the existing approximate reliability analysis methods,offering rapid sensitivity evaluation and slope reliability analysis.