As a discrete spectrum correction method, the Fourier transform （FT） continuous zoom analysis method is widely used in vibration signal analysis, but little effort had been made on this method＇s anti-noise performa...As a discrete spectrum correction method, the Fourier transform （FT） continuous zoom analysis method is widely used in vibration signal analysis, but little effort had been made on this method＇s anti-noise performance. It is widely believed that the analysis accuracy of the method can be substantially improved by increasing the zoom multiple, however, with the zoom multiple increases, the frequency estimation accuracy may decline sometimes in practices. Aiming at the problems above, this paper analyzes the sources of frequency estimation error when a harmonic signal mixed with and without noise is processed using the FT continuous zoom analysis. According to the characteristics that the local maximum of the zoom spectrum may be wrongly selected when the signal is corrupted with noise, the number of wrongly selected spectrum lines is deduced under different signal-to-noise ratio and local zoom multiple, and then the maximum frequency estimation error is given accordingly. The validity of the presented analysis is confirmed by simulations results. The frequency estimation accuracy of this method will not improve any more under the influence of noise, and there is a best zoom multiple, when the zoom multiple is larger than the best zoom multiple; the maximum frequency estimation error will fluctuate back and forth. The best zoom multiple curves under different signal-to-noise ratios given provide a theoretical basis for the choice of the appropriate zoom multiples of the FT continuous zoom analysis method in engineering applications.展开更多
A new approach is proposed in this study for accountable capability improvement based on interpretable capability evaluation using the belief rule base(BRB).Firstly,a capability evaluation model is constructed and opt...A new approach is proposed in this study for accountable capability improvement based on interpretable capability evaluation using the belief rule base(BRB).Firstly,a capability evaluation model is constructed and optimized.Then,the key sub-capabilities are identified by quantitatively calculating the contributions made by each sub-capability to the overall capability.Finally,the overall capability is improved by optimizing the identified key sub-capabilities.The theoretical contributions of the proposed approach are as follows.(i)An interpretable capability evaluation model is constructed by employing BRB which can provide complete access to decision-makers.(ii)Key sub-capabilities are identified according to the quantitative contribution analysis results.(iii)Accountable capability improvement is carried out by only optimizing the identified key sub-capabilities.Case study results show that“Surveillance”,“Positioning”,and“Identification”are identified as key sub-capabilities with a summed contribution of 75.55%in an analytical and deducible fashion based on the interpretable capability evaluation model.As a result,the overall capability is improved by optimizing only the identified key sub-capabilities.The overall capability can be greatly improved from 59.20%to 81.80%with a minimum cost of 397.Furthermore,this paper also investigates how optimizing the BRB with more collected data would affect the evaluation results:only optimizing“Surveillance”and“Positioning”can also improve the overall capability to 81.34%with a cost of 370,which thus validates the efficiency of the proposed approach.展开更多
We systemically investigate optical trapping capability of a kind of tornado waves on Rayleigh particles.Such tornado waves are named as tornado circular Pearcey beams(TCPBs)and produced by combining two circular Pear...We systemically investigate optical trapping capability of a kind of tornado waves on Rayleigh particles.Such tornado waves are named as tornado circular Pearcey beams(TCPBs)and produced by combining two circular Pearcey beams with different radii.Our theoretical exploration delves into various aspects,including the propagation dynamics,energy flux,orbital angular momentum,trapping force,and torque characteristics of TCPBs.The results reveal that the orbital angular momentum,trapping force,and torque of these beams can be finely tuned through the judicious manipulation of their topological charges(l_(1)and l_(2)).Notably,we observe a precise control mechanism wherein the force diminishes with|l_(1)+l_(2)|and|l_(1)-l_(2)|,while the torque exhibits enhancement by decreasing solely with|l_(1)+l_(2)|or increasing with|l_(1)-l_(2)|.These results not only provide quantitative insights into the optical trapping performance of TCPBs but also serve as a valuable reference for the ongoing development of innovative photonic tools.展开更多
The pressure-preserving controller is the core part of deep in-situ pressure-preserving coring(IPP-Coring) system, and its pressure-preserving capability is the key to IPP-Coring technology. To achieve a good understa...The pressure-preserving controller is the core part of deep in-situ pressure-preserving coring(IPP-Coring) system, and its pressure-preserving capability is the key to IPP-Coring technology. To achieve a good understanding of the influence of mechanical properties of materials on the ultimate pressure-bearing capability(UPB-Capability) of the pressure-preserving controller, the IPP-Coring experimental platform was developed to test the UPB-Capability of pressure-preserving controllers of four different materials. The experimental results show that the UPB-Capability of pressure-preserving controllers with different material varies greatly. A numerical model of the pressure-preserving controller was developed to study the influences of mechanical parameters of materials on the UPB-Capability of the pressurepreserving controller after the accuracy of the numerical model is verified by experiments. The results indicate that the yield strength(YS) and Poisson's ratio(PR) of the material have little effect on the UPB-Capability of the pressure-preserving controller, whereas the elastic modulus(EM) of the material has a significant effect. A generalized model of the UPB-Capability of the pressure-preserving controller is developed to reveal the mechanism of the influence of material properties on the UPB-Capability of the pressure-preserving controllers. Considering these results, the future optimization direction of the pressure-preserving controller and material selection scheme in practical engineering applications of the pressure-preserving controller are suggested.展开更多
Concomitant with the advancement of contemporary medical technology,the significance of perioperative nursing has been increasingly accentuated,necessitating elevated standards for the pedagogy of perioperative nursin...Concomitant with the advancement of contemporary medical technology,the significance of perioperative nursing has been increasingly accentuated,necessitating elevated standards for the pedagogy of perioperative nursing.Presently,the PBL(problem-based learning)pedagogical approach,when integrated with CBL(case-based learning),has garnered considerable interest.An extensive literature review has been conducted to analyze the application of the PBL-CBL fusion in the education of perioperative nursing.Findings indicate that this integrative teaching methodology not only enhances students’theoretical knowledge,practical competencies,and collaborative skills but also contributes to the elevation of teaching quality.In conclusion,the PBL-CBL teaching approach holds immense potential for broader application in perioperative nursing education.Nevertheless,it is imperative to continually refine this combined pedagogical strategy to further enhance the caliber of perioperative nursing instruction and to cultivate a greater number of exceptional nursing professionals in the operating room setting.展开更多
To investigate the process of information technology （IT） impacts on firm competitiveness, an integrated process model of IT impacts on firm competitiveness is brought forward based on the process-oriented view, the...To investigate the process of information technology （IT） impacts on firm competitiveness, an integrated process model of IT impacts on firm competitiveness is brought forward based on the process-oriented view, the resource-based view and the complementary resource view, which is comprised of an IT conversion process, an information system （IS） adoption process, an IS use process and a competition process. The application capability of IT plays the critical role, which determines the efficiency and effectiveness of the aforementioned four processes. The process model of IT impacts on firm competitiveness can also be used to explain why, under what situations and how IT can generate positive organizational outcomes, as well as theoretical bases for further empirical study.展开更多
In order to solve the problem that the current matchmaking methods for semantic web service mainly focus on the matchmaking of IO （inputs, outputs） descriptions which may result in one-sidedness, a description-logic...In order to solve the problem that the current matchmaking methods for semantic web service mainly focus on the matchmaking of IO （inputs, outputs） descriptions which may result in one-sidedness, a description-logic-based IOPE （inputs, outputs, preconditions, effects） description and matchmaking method is proposed for semantic web service. The description logic concept is used to annotate service IO and the description logic assertion is employed to describe service PE（preconditions, effects）. TBox subsumption checking is used to measure the subsumption relationship between IO descriptions of service request and advertising; ABox consistency checking is used for checking the logical implication between PE descriptions of service request and advertising. Based upon the logical implication, four kinds of PE matching degrees are proposed to measure and compare the pros and cons of the results of matchmaking. They are the exact, perfect, side-effect and common match. Experiments show that the method has a higher precision rate under the same recall rate compared with the existing method.展开更多
Spinel LiMn2O4 microspheres with durable high rate capability were synthesized by a facile route using spherical MnCO3 precursors as the self-supported templates, combined with the calcinations of LiNO3 at 700 °C...Spinel LiMn2O4 microspheres with durable high rate capability were synthesized by a facile route using spherical MnCO3 precursors as the self-supported templates, combined with the calcinations of LiNO3 at 700 °C for 8 h. The spherical MnCO3 precursors were obtained from the control of the crystallizing process of Mn2＋ ions and NH4HCO3 in aqueous solution. The effects of the mole ratio of the raw materials, reaction time, and reaction temperature on the morphology and yield of the MnCO3 were investigated. The as-synthesized MnCO3 and LiMn2O4 microspheres were characterized by powder X-ray diffractometry （XRD） and scanning electron microscopy （SEM）. Galvanostatic charge/discharge tests indicate that the spinel LiMn2O4 microspheres deliver a discharge capacity of 90 mA-h/g at 10C rate show good capacity retention capability （75% of their initial capacity after 800 cycles at 10C rate）. The durable high rate capability suggests that the as-synthesized LiMn2O4 microspheres are promising cathode materials for high power lithium ion batteries.展开更多
基金supported by National Natural Science Foundation of China (Grant No. 50875085, Grant No. 50605021, and Grant No. 51075150)Guangdong Provincial Natural Science Foundation of China (Grant No. 91510641010000320)
文摘As a discrete spectrum correction method, the Fourier transform （FT） continuous zoom analysis method is widely used in vibration signal analysis, but little effort had been made on this method＇s anti-noise performance. It is widely believed that the analysis accuracy of the method can be substantially improved by increasing the zoom multiple, however, with the zoom multiple increases, the frequency estimation accuracy may decline sometimes in practices. Aiming at the problems above, this paper analyzes the sources of frequency estimation error when a harmonic signal mixed with and without noise is processed using the FT continuous zoom analysis. According to the characteristics that the local maximum of the zoom spectrum may be wrongly selected when the signal is corrupted with noise, the number of wrongly selected spectrum lines is deduced under different signal-to-noise ratio and local zoom multiple, and then the maximum frequency estimation error is given accordingly. The validity of the presented analysis is confirmed by simulations results. The frequency estimation accuracy of this method will not improve any more under the influence of noise, and there is a best zoom multiple, when the zoom multiple is larger than the best zoom multiple; the maximum frequency estimation error will fluctuate back and forth. The best zoom multiple curves under different signal-to-noise ratios given provide a theoretical basis for the choice of the appropriate zoom multiples of the FT continuous zoom analysis method in engineering applications.
基金supported by the National Natural Science Foundation of China(72471067,72431011,72471238,72231011,62303474,72301286)the Fundamental Research Funds for the Provincial Universities of Zhejiang(GK239909299001-010).
文摘A new approach is proposed in this study for accountable capability improvement based on interpretable capability evaluation using the belief rule base(BRB).Firstly,a capability evaluation model is constructed and optimized.Then,the key sub-capabilities are identified by quantitatively calculating the contributions made by each sub-capability to the overall capability.Finally,the overall capability is improved by optimizing the identified key sub-capabilities.The theoretical contributions of the proposed approach are as follows.(i)An interpretable capability evaluation model is constructed by employing BRB which can provide complete access to decision-makers.(ii)Key sub-capabilities are identified according to the quantitative contribution analysis results.(iii)Accountable capability improvement is carried out by only optimizing the identified key sub-capabilities.Case study results show that“Surveillance”,“Positioning”,and“Identification”are identified as key sub-capabilities with a summed contribution of 75.55%in an analytical and deducible fashion based on the interpretable capability evaluation model.As a result,the overall capability is improved by optimizing only the identified key sub-capabilities.The overall capability can be greatly improved from 59.20%to 81.80%with a minimum cost of 397.Furthermore,this paper also investigates how optimizing the BRB with more collected data would affect the evaluation results:only optimizing“Surveillance”and“Positioning”can also improve the overall capability to 81.34%with a cost of 370,which thus validates the efficiency of the proposed approach.
基金Project supported by the National Natural Science Foundation of China(Grant No.11604058)the Guangxi Natural Science Foundation(Grant Nos.2020GXNSFAA297041 and 2023JJA110112)the Innovation Project of Guangxi Graduate Education(Grant No.YCSW2023083)。
文摘We systemically investigate optical trapping capability of a kind of tornado waves on Rayleigh particles.Such tornado waves are named as tornado circular Pearcey beams(TCPBs)and produced by combining two circular Pearcey beams with different radii.Our theoretical exploration delves into various aspects,including the propagation dynamics,energy flux,orbital angular momentum,trapping force,and torque characteristics of TCPBs.The results reveal that the orbital angular momentum,trapping force,and torque of these beams can be finely tuned through the judicious manipulation of their topological charges(l_(1)and l_(2)).Notably,we observe a precise control mechanism wherein the force diminishes with|l_(1)+l_(2)|and|l_(1)-l_(2)|,while the torque exhibits enhancement by decreasing solely with|l_(1)+l_(2)|or increasing with|l_(1)-l_(2)|.These results not only provide quantitative insights into the optical trapping performance of TCPBs but also serve as a valuable reference for the ongoing development of innovative photonic tools.
基金financially supported by the National Natural Science Foundation of China (Grant Nos. 52225403, 52304146, 51827901)Sichuan Science and Technology Program (2023NSFSC0919)。
文摘The pressure-preserving controller is the core part of deep in-situ pressure-preserving coring(IPP-Coring) system, and its pressure-preserving capability is the key to IPP-Coring technology. To achieve a good understanding of the influence of mechanical properties of materials on the ultimate pressure-bearing capability(UPB-Capability) of the pressure-preserving controller, the IPP-Coring experimental platform was developed to test the UPB-Capability of pressure-preserving controllers of four different materials. The experimental results show that the UPB-Capability of pressure-preserving controllers with different material varies greatly. A numerical model of the pressure-preserving controller was developed to study the influences of mechanical parameters of materials on the UPB-Capability of the pressurepreserving controller after the accuracy of the numerical model is verified by experiments. The results indicate that the yield strength(YS) and Poisson's ratio(PR) of the material have little effect on the UPB-Capability of the pressure-preserving controller, whereas the elastic modulus(EM) of the material has a significant effect. A generalized model of the UPB-Capability of the pressure-preserving controller is developed to reveal the mechanism of the influence of material properties on the UPB-Capability of the pressure-preserving controllers. Considering these results, the future optimization direction of the pressure-preserving controller and material selection scheme in practical engineering applications of the pressure-preserving controller are suggested.
文摘Concomitant with the advancement of contemporary medical technology,the significance of perioperative nursing has been increasingly accentuated,necessitating elevated standards for the pedagogy of perioperative nursing.Presently,the PBL(problem-based learning)pedagogical approach,when integrated with CBL(case-based learning),has garnered considerable interest.An extensive literature review has been conducted to analyze the application of the PBL-CBL fusion in the education of perioperative nursing.Findings indicate that this integrative teaching methodology not only enhances students’theoretical knowledge,practical competencies,and collaborative skills but also contributes to the elevation of teaching quality.In conclusion,the PBL-CBL teaching approach holds immense potential for broader application in perioperative nursing education.Nevertheless,it is imperative to continually refine this combined pedagogical strategy to further enhance the caliber of perioperative nursing instruction and to cultivate a greater number of exceptional nursing professionals in the operating room setting.
基金The National Natural Science Foundation of China(No.70671024).
文摘To investigate the process of information technology （IT） impacts on firm competitiveness, an integrated process model of IT impacts on firm competitiveness is brought forward based on the process-oriented view, the resource-based view and the complementary resource view, which is comprised of an IT conversion process, an information system （IS） adoption process, an IS use process and a competition process. The application capability of IT plays the critical role, which determines the efficiency and effectiveness of the aforementioned four processes. The process model of IT impacts on firm competitiveness can also be used to explain why, under what situations and how IT can generate positive organizational outcomes, as well as theoretical bases for further empirical study.
文摘In order to solve the problem that the current matchmaking methods for semantic web service mainly focus on the matchmaking of IO （inputs, outputs） descriptions which may result in one-sidedness, a description-logic-based IOPE （inputs, outputs, preconditions, effects） description and matchmaking method is proposed for semantic web service. The description logic concept is used to annotate service IO and the description logic assertion is employed to describe service PE（preconditions, effects）. TBox subsumption checking is used to measure the subsumption relationship between IO descriptions of service request and advertising; ABox consistency checking is used for checking the logical implication between PE descriptions of service request and advertising. Based upon the logical implication, four kinds of PE matching degrees are proposed to measure and compare the pros and cons of the results of matchmaking. They are the exact, perfect, side-effect and common match. Experiments show that the method has a higher precision rate under the same recall rate compared with the existing method.
基金Project(2011M501090) upported by the China Postdoctoral Science FoundationProject(SCUT2012ZZ0042) upported by the Fundamental Research Funds for the Central Universities+1 种基金Project supported by the"SPR-2011"of South China University of TechnologyProject(NRC07/08.EG01)supprted by the Fok Ying Tung Foundation
文摘Spinel LiMn2O4 microspheres with durable high rate capability were synthesized by a facile route using spherical MnCO3 precursors as the self-supported templates, combined with the calcinations of LiNO3 at 700 °C for 8 h. The spherical MnCO3 precursors were obtained from the control of the crystallizing process of Mn2＋ ions and NH4HCO3 in aqueous solution. The effects of the mole ratio of the raw materials, reaction time, and reaction temperature on the morphology and yield of the MnCO3 were investigated. The as-synthesized MnCO3 and LiMn2O4 microspheres were characterized by powder X-ray diffractometry （XRD） and scanning electron microscopy （SEM）. Galvanostatic charge/discharge tests indicate that the spinel LiMn2O4 microspheres deliver a discharge capacity of 90 mA-h/g at 10C rate show good capacity retention capability （75% of their initial capacity after 800 cycles at 10C rate）. The durable high rate capability suggests that the as-synthesized LiMn2O4 microspheres are promising cathode materials for high power lithium ion batteries.
