In this work,we investigated the discharge characteristics and heating mechanisms of argon helicon plasma in different wave coupled modes with and without blue core.Spatially resolved spectroscopy and emission intensi...In this work,we investigated the discharge characteristics and heating mechanisms of argon helicon plasma in different wave coupled modes with and without blue core.Spatially resolved spectroscopy and emission intensity of argon atom and ion lines were measured via local optical emission spectroscopy,and electron density was measured experimentally by an RFcompensated Langmuir probe.The relation between the emission intensity and the electron density was obtained and the wavenumbers of helicon and’Trivelpiece-Gould’(TG)waves were calculated by solving the dispersion relation in wave modes.The results show that at least two distinct wave coupled modes appear in argon helicon plasma at increasing RF power,i.e.blue core(or BC)mode with a significant bright core of blue lights and a normal wave(NW)mode without blue core.The emission intensity of atom line 750.5 nm(lArⅠ750.5nm)is related to the electron density and tends to be saturated in wave coupled modes due to the neutral depletion,while the intensity of ion line 480.6 nm(IArⅡ480.6nm)is a function of the electron density and temperature,and increases dramatically as the RF power is increased.Theoretical analysis shows that TG waves are strongly damped at the plasma edge in NW and/or BC modes,while helicon waves are the dominant mechanism of power deposition or central heating of electrons in both modes.The formation of BC column mainly depends on the enhanced central electron heating by helicon waves rather than TG waves since the excitation of TG waves would be suppressed in this special anti-resonance region.展开更多
In this study, the reaction characteristics of reduction of calcined dolomite with ferrosilicon under argon flow to produce magnesium were studied by conducting experiments Pidgeon pellets were used to study the effec...In this study, the reaction characteristics of reduction of calcined dolomite with ferrosilicon under argon flow to produce magnesium were studied by conducting experiments Pidgeon pellets were used to study the effect of reduced temperature, argon flow, and reduced time on the conversion of calcined dolomite reduction by ferrosilicon. The results show that the conversion significantly increases with the increase in the reduction temperature and reduction time. The conversion first increases and then decreases with the increase in argon flow. The highest conversion was obtained when the argon flow rate was 3 L·min^(-1), and a nearly spherical shape, nanoscale magnesium powder was obtained. Then the characters of the circulating argon entrainment process were numerically studied by ANSYS Fluent 17. A physical model of multilayer pellet arrangement was established, and a numerical calculation model of chemical reaction, radiation, heat conduction, and convection heat transfer was constructed. This confirms that high-temperature argon can effectively strengthen the heat exchange between pellets, improve the heat transfer efficiency, and facilitate the pellets to react quickly. When the conversion is 80%, the production efficiency increased by about 28.6%. In addition, the magnesium production efficiency showed an increase tendency with the increase of the argon inlet flow rate.展开更多
The purpose of this research was to study the effect of Argon inert gas on the laser welding quality of Co-Cr and Ni-Cr base metal alloys, which are widely used as Fixed Prosthodontics alloys in Dental Laboratories. A...The purpose of this research was to study the effect of Argon inert gas on the laser welding quality of Co-Cr and Ni-Cr base metal alloys, which are widely used as Fixed Prosthodontics alloys in Dental Laboratories. A total of 36 specimens were manufactured (18 of Ni-Cr alloy and 18 of Co-Cr alloy). The specimens were then divided into 3 subgroups (6 specimens each): control;argon-welded;and non-Argon welded. The specimens were cut, laser welded, radiographed and finally tested under tensile strength testing, followed by examination using Scanning Electron Microscopy. The tensile strength of welded specimens was lower than the strength of non-welded specimens, however this difference was not found to be statistically significant. The material factor (Co-Cr alloy or Ni-Cr alloy) has a statistically significant effect on the tensile strength, while the presence or not of the inert gas, as well as the combination of the two factors do not have a statistically significant effect. The laser welding process applied in daily practice (separation of specimen, formation of two cones in contact, aggregation of two cones, filling of the remaining gap by welding) is considered satisfactory in terms of weld strength. The factor of the material, as an independent factor, affects the tensile strength to a statistically significant degree, in contrast to the factor of the presence of inert gas which does not affect to a statistically significant degree.展开更多
BACKGROUND Chronic radiation proctitis(CRP) is a complication which occurs in 1%-5% of patients who undergo radiotherapy for pelvic malignancies. Although a wide range of therapeutic modalities are available, there is...BACKGROUND Chronic radiation proctitis(CRP) is a complication which occurs in 1%-5% of patients who undergo radiotherapy for pelvic malignancies. Although a wide range of therapeutic modalities are available, there is no literature to date showing any particularly appropriate therapeutic modality for each disease stage. Argon plasma coagulation(APC) is currently recommended as the firstchoice treatment for hemorrhagic CRP, however, its indication based on longterm follow-up is still unclear. On the hypothesis that the long-term efficacy and safety of APC are not fully understood, we reviewed APC treatment for patients with hemorrhagic CRP from a single center.AIM To assess the long-term efficacy and safety of APC for hemorrhagic CRP.METHODS This is a retrospective study of consecutive patients treated with APC for hemorrhagic CRP from January 2013 to October 2017. Demographics, clinical variables, and typical endoscopic features were recorded independently. Success was defined as either cessation of bleeding or only occasional traces of bloody stools with no further treatments for at least 12 mo after the last APC treatment.We performed univariate and multivariate analyses to identify factors associated with success and risk factors for fistulas.RESULTS Forty-five patients with a median follow-up period of 24 mo(range: 12-67 mo)were enrolled. Fifteen(33.3%) patients required blood transfusion before APC.Successful treatment with APC was achieved in 31(68.9%) patients. The mean number of APC sessions was 1.3(1-3). Multivariate analysis showed that APC failure was independently associated with telangiectasias present on more than50% of the surface area [odds ratio(OR) = 6.53, 95% confidence interval(CI): 1.09-39.19, P = 0.04] and ulcerated area greater than 1 cm^2(OR = 8.15, 95%CI: 1.63-40.88, P = 0.01). Six(13.3%) patients had severe complications involving rectal fistulation. The only factor significantly associated with severe complications was ulcerated area greater than 1 cm^2(P = 0.035).CONCLUSION The long-term efficacy of APC for hemorrhagic CRP is uncertain in patients with telangiectasias present on > 50% of the surface area and ulceration > 1 cm^2.展开更多
Based on the isotopic chronologic results of Cenozoic alkali basalts from the South China Sea, the characteristics of volcanic activi- ty of the South China Sea after spreading were studied. The potassium - argon ages...Based on the isotopic chronologic results of Cenozoic alkali basalts from the South China Sea, the characteristics of volcanic activi- ty of the South China Sea after spreading were studied. The potassium - argon ages of eight alkali basalt samples from the South China Sea, and the argon - argon ages of two samples among them are reported. Apparent ages of the whole rock are 3.80 to 7. 91 Ma with an average value of 5.43 Ma (potassium- argon, whole rock), and there is little difference among samples at the same location, e. g. , 4. 76 - 5.78 Ma for location S(M-12. The argon - argon ages for the two samples are 6.06 and 4. 71 Ma, which lie within the age scope of potassium - argon method. The dating results indicate that rock-forming age is from late Miocene to Pliocene, which is consistent with erupting event for alkali basalts from adjacent regions of the South China Sea. Volcanic activities occur after the cessation of spreading of the South China Sea, which are controlled by lithospheric fault and the spreading center formed during the spreading period of the South China Sea. These dating results, combined with geochemical characteristics of these basalts, the published chronological data for the South China Sea and its adjacent regions, and the updated geophysical data near Hainan Island, suggest that after the cessation of spreading of the South China Sea, there occur widely distributing magmatic activities which primarily is alkali basalt, and the volcanic activity continues to Quaternary. The activity may be relative to Hainan mantle plume originated from core/mantle boundary.展开更多
The Jinding superlarge lead and zinc deposit has attracted the attention of geologists of the world and its metallogenesis has long been in dispute. This paper takes the Jinding deposit and the Baiyangping Cu-Ag-Co de...The Jinding superlarge lead and zinc deposit has attracted the attention of geologists of the world and its metallogenesis has long been in dispute. This paper takes the Jinding deposit and the Baiyangping Cu-Ag-Co deposit which was recently found at about 30 km north of Jinding as one ore belt, and, based on researches on the helium, argon, and xenon isotopic compositions of primary inclusions in ore-forming solutions of the main stage, the authors have found that the 3He/4He ratio of the ore-forming fluid is 2.7×10?6 (varying from 0.19 to 1.97 Ra), the 4He/40Ar ratio (0.24–3.12) is close to the mantle characteristic ratio, and the xenon isotopic composition and evolution show characters of the mantle xenon. The above results reveal the characteristics of mantle source and crust-mantle fluid mixing (mantle helium reaching 32%) and the metallogenic contributions of the deep processes in the Jinding-Baiyangping ore belt.展开更多
We previously found that argon exerts its neuroprotective effect in part by inhibition of the toll-like receptors(TLR)2 and 4.The downstream transcription factors signal transducer and activator of transcription 3(STA...We previously found that argon exerts its neuroprotective effect in part by inhibition of the toll-like receptors(TLR)2 and 4.The downstream transcription factors signal transducer and activator of transcription 3(STAT3)and nuclear factor kappa B(NF-κB)are also affected by argon and may play a role in neuroprotection.It also has been demonstrated that argon treatment could mitigate brain damage,reduce excessive microglial activation,and subsequently attenuate brain inflammation.Despite intensive research,the further exact mechanism remains unclear.In this study,human neuroblastoma cells were damaged in vitro with rotenone over a period of 4 hours(to mimic cerebral ischemia and reperfusion damage),followed by a 2-hour post-conditioning with argon(75%).In a separate in vivo experiment,retinal ischemia/reperfusion injury was induced in rats by increasing intraocular pressure for 1 hour.Upon reperfusion,argon was administered by inhalation for 2 hours.Argon reduced the binding of the transcription factors signal transducer and activator of transcription 3,nuclear factor kappa B,activator protein 1,and nuclear factor erythroid 2-related factor 2,which are involved in regulation of neuronal damage.Flow cytometry analysis showed that argon downregulated the Fas ligand.Some transcription factors were regulated by toll-like receptors;therefore,their effects could be eliminated,at least in part,by the TLR2 and TLR4 inhibitor oxidized phospholipid 1-palmitoyl-2-arachidonoyl-sn-glycero-3-phosphorylcholine(OxPAPC).Argon treatment reduced microglial activation after retinal ischemia/reperfusion injury.Subsequent quantitative polymerase chain reaction analysis revealed a reduction in the pro-inflammatory cytokines interleukin(IL-1α),IL-1β,IL-6,tumor necrosis factorα,and inducible nitric oxide synthase.Our results suggest that argon reduced the extent of inflammation in retinal neurons after ischemia/reperfusion injury by suppression of transcription factors crucial for microglial activation.Argon has no known side effects or narcotic properties;therefore,therapeutic use of this noble gas appears ideal for treatment of patients with neuronal damage in retinal ischemia/reperfusion injury.The animal experiments were approved by the Commission for Animal Care of the University of Freiburg(approval No.35-9185.81/G14-122)on October 19,2012.展开更多
The available studies in the literature on physical and mathematical modeling of the argon oxygen decarburization (AOD) process of stainless steel have briefly been reviewed. The latest advances made by the author wi...The available studies in the literature on physical and mathematical modeling of the argon oxygen decarburization (AOD) process of stainless steel have briefly been reviewed. The latest advances made by the author with his research group have been summarized. Water modeling was used to investigate the fluid flow and mixing characteristics in the bath of an 18 t AOD vessel, as well as the 'back attack' action of gas jets and its effects on the erosion and wear of the refractory lining, with sufficiently full kinematic similarity. The non rotating and rotating gas jets blown through two annular tuyeres, respectively of straight tube and spiral flat tube type, were employed in the experiments. The geometric similarity ratio between the model and its prototype (including the straight tube type tuyeres) was 1:3. The influences of the gas flow rate, the angle included between the two tuyeres and other operating parameters, and the suitability of the spiral tuyere as a practical application, were examined. These latest studies have clearly and successfully brought to light the fluid flow and mixing characteristics in the bath and the overall features of the back attack phenomena of gas jets during the blowing, and have offered a better understanding of the refining process. Besides, mathematical modeling for the refining process of stainless steel was carried out and a new mathematical model of the process was proposed and developed. The model performs the rate calculations of the refining and the mass and heat balances of the system. Also, the effects of the operating factors, including adding the slag materials, crop ends, and scrap, and alloy agents; the non isothermal conditions; the changes in the amounts of metal and slag during the refining; and other factors were all considered. The model was used to deal with and analyze the austenitic stainless steel making (including ultra low carbon steel) and was tested on data of 32 heats obtained in producing 304 grade steel in an 18 t AOD vessel. The changes in the bath composition and temperature during the refining process with time can be accurately predicted using this model. The model can provide some very useful information and a reliable basis for optimizing the process practice of the refining of stainless steel and control of the process in real time and online.展开更多
An improved self-consistent, multi-component, and one-dimensional plasma model for simulating atmospheric pressure argon glow discharge is presented. In the model, both the plasma hydrodynamics model and chemical mode...An improved self-consistent, multi-component, and one-dimensional plasma model for simulating atmospheric pressure argon glow discharge is presented. In the model, both the plasma hydrodynamics model and chemical model are considered. The numerical simulation is carried out for parallel-plate geometry with a separation of 0.06 cm. The results show that Ar* plays a major role in the discharge, which is mainly produced by ground state excitation reaction. The electron temperature reaches its maximum in the cathode sheath but maintains a low value (0.23 eV) in bulk plasma. Elastic collision is the dominant volumetric electron energy loss in atmosphere argon glow discharge, which is negligible in low pressure argon glow discharge. The metastable step-wise ionization is the main mechanism for electron production to sustain the discharge. However, the highest contribution to electron production rate is ground state ionization reaction. The bremsstrahlung power density is related to electric voltage. With the increase of the electric voltage, the bremsstrahlung power density increases, namely, the strength of ultraviolet radiation spectrum enhances in the cathode sheath.展开更多
The study on the fluid flow, meniscus oscillation, slag entrapment in continuous casting mould was conducted mathematically and experimentally. The results show that the injection of argon into submerged nozzle enhan...The study on the fluid flow, meniscus oscillation, slag entrapment in continuous casting mould was conducted mathematically and experimentally. The results show that the injection of argon into submerged nozzle enhances the meniscus oscillation, thus increases the probability of slag entrapment, and the critical argon blowing flow rate, which will give rise to slag entrapment, is around 10l/min. The trajectory of bubble is affected by the bubble diameter and the molten steel flow, and the bubble diameter is dominant. The bubble with diameter 1.4mm floats fastest with 0.47m/s terminal velocity.展开更多
Inductively coupled plasmas (ICPs) are used in spectrochemical analyses. The introduction of the sample by means of an aerosol are widely used. The introduction and the total evaporation of the aerosol is required i...Inductively coupled plasmas (ICPs) are used in spectrochemical analyses. The introduction of the sample by means of an aerosol are widely used. The introduction and the total evaporation of the aerosol is required in order to obtain a good repeatability and reproducibility of analyses. To check whether the vaporization of the aerosol droplets inside the plasma is completed, a solution could be used to compare the experimental results of the emission spectral lines with theoretical results. An accurate calculation code to obtain monatomic spectral lines intensities is therefore required, which is the purpose of the present paper. The mixtures of argon, water and nitric acid are widely used in spectrochemical analyses with ICPs. With these mixtures, we calculate the composition, thermodynamic functions and monatomic spectral lines intensities of the plasma at thermodynamic equilibrium and at atmospheric pressure. To obtain a self sufficient paper and also to allow other researchers to compare their results, all required data and a robust accurate algorithm, which is simple and easy to compute, are given.展开更多
AIM: To compare argon laser photocoagulation and intrastromal injection of voriconazole as adjunctive treatment modalities in cases of resistant mycotic corneal ulcers. METHODS: Two groups each of them included 20 c...AIM: To compare argon laser photocoagulation and intrastromal injection of voriconazole as adjunctive treatment modalities in cases of resistant mycotic corneal ulcers. METHODS: Two groups each of them included 20 cases of resistant mycotic corneal ulcers. Both groups treated with local and systemic specific antimicrobial drugs guided with culture and sensitivity results. In one group argon laser photocoagulation was used as an adjunctive therapy to the specific antifungal drugs and in the other group, intrastromal injection of voriconazole was done besides the specific antifungal drugs. The 40 cases included in the study were proven according to culture and sensitivity to be 28 cases with pure fungal results and 12 cases with mixed (fungal and bacterial). In argon laser group, argon laser irradiation of the corneal ulcer was performed using argon laser 532 nm wavelength (Carl Zeiss LSL 532s AG; Meditec, Inc.) after fluorescein staining. In the other group, voriconazole solution (500 pg/mL) was prepared and injected in the corneal stroma. All cases were followed up for 3mo after healing was achieved. RESULTS: Complete healing of the epithelial defect and resolution of stromal infiltration with no adverse effects were achieved in argon laser group in duration ranged from 2-4wk in 90% of cases. In voriconazole group 4 cases needed amniotic membrane graft due to thinning and 16 cases healed in duration ranged from 2- 6wk (80% of cases). CONCLUSION: Argon superior to intrastromal treatment of resistant fungal laser photocoagulation is voriconazole injection in corneal ulcers.展开更多
With the development of endoscopic therapy,argon plasma coagulation(APC)has been widely used by endoscopists.It has many advantages,such as simple to operate,low cost,and minimal invasiveness.Because of its capability...With the development of endoscopic therapy,argon plasma coagulation(APC)has been widely used by endoscopists.It has many advantages,such as simple to operate,low cost,and minimal invasiveness.Because of its capability of lesion ablation and hemostasis,APC has several indications in the gastrointestinal tract.One of them is esophageal varices.The aim of this review is to summarize the research on APC in this field to provide a reference for clinical practice.展开更多
Prostatic brachytherapy with permanent seed implants is a recent and safe radiation therapy technique associated with radiation-induced digestive disease.Argon plasma coagulation procedure is a validated modality in t...Prostatic brachytherapy with permanent seed implants is a recent and safe radiation therapy technique associated with radiation-induced digestive disease.Argon plasma coagulation procedure is a validated modality in the management of haemorrhagic radiation proctitis,which is known to occasionally induce chronic rectal ulcers.We report here an original case report of an acute painful rectal ulcer as a consequence of the combination of shortterm therapy with non-steroidal anti-inflammatory drugs therapy,prostatic brachytherapy with malposition of seed implants and argon plasma coagulation procedure in a patient with haemorrhagic radiation proctitis.The description of this clinical observation is essential to recommend the discontinuation of non-steroidal anti-inflammatory drugs therapy and the control of the position of seed implants in case of prostatic brachytherapy before argon plasma coagulation for radiation-induced proctitis.展开更多
Bulk separates of porphyroclastic phengite, neoformed phengite and their mixtures from the Tan-Lu HP mylonites overprinted on the Sulu UHP rocks were analyzed with the 40Ar/39Ar step heating method. Two samples of the...Bulk separates of porphyroclastic phengite, neoformed phengite and their mixtures from the Tan-Lu HP mylonites overprinted on the Sulu UHP rocks were analyzed with the 40Ar/39Ar step heating method. Two samples of the neoformed phengite from ultramylonite give 40Ar/39Ar plateau ages of 209.9±1.8 Ma and 214.3±1.8 Ma, which are interpreted as representing cooling times of the TanLu sinistral faulting, and provide geochronological evidence for the syn-orogenic faulting of the Tan-Lu fault zone. The results show that the phengite formed during the retrograde eclogite-facies mylonitization was not contaminated with excess argon and can be used for dating the deformation. Argon closure in previous K-bearing minerals with excess argon under a retrograde HP dry condition is considered to be the reason for lack of excess argon incorporation in the neoformed phengite. Five porphyroclastic phengite samples yield 40Ar/39Ar plateau ages ranging from 666±12 Ma to 307.1±3.3 Ma, which are interpreted as being contaminated with excess argon. Two mixture samples with plateau ages of 239.4±2.1 Ma and 239.3±2.0 Ma show upward-convex age spectra caused by the mixture of older porphyroclastic phengite with excess argon incorporation and younger neoformed phengite without excess argon incorporation. It is demonstrated that excess argon introduced from the previous UHP metamorphism is still preserved in the pre-existing phengite after the Tan-Lu eclogite-facies mylonitization. The intense deformation under HT and HP conditions cannot erase excess argon in the previous phengite totally due to restricted fluid activities. These porphyroclastic phengite previously contaminated with excess argon cannot be used for dating the later HP deformation. This indicates that deformation under a HP dry condition does not play an important role in removing previous 40Are in phengite.展开更多
基金National Natural Science Foundation of China(No.11975047)。
文摘In this work,we investigated the discharge characteristics and heating mechanisms of argon helicon plasma in different wave coupled modes with and without blue core.Spatially resolved spectroscopy and emission intensity of argon atom and ion lines were measured via local optical emission spectroscopy,and electron density was measured experimentally by an RFcompensated Langmuir probe.The relation between the emission intensity and the electron density was obtained and the wavenumbers of helicon and’Trivelpiece-Gould’(TG)waves were calculated by solving the dispersion relation in wave modes.The results show that at least two distinct wave coupled modes appear in argon helicon plasma at increasing RF power,i.e.blue core(or BC)mode with a significant bright core of blue lights and a normal wave(NW)mode without blue core.The emission intensity of atom line 750.5 nm(lArⅠ750.5nm)is related to the electron density and tends to be saturated in wave coupled modes due to the neutral depletion,while the intensity of ion line 480.6 nm(IArⅡ480.6nm)is a function of the electron density and temperature,and increases dramatically as the RF power is increased.Theoretical analysis shows that TG waves are strongly damped at the plasma edge in NW and/or BC modes,while helicon waves are the dominant mechanism of power deposition or central heating of electrons in both modes.The formation of BC column mainly depends on the enhanced central electron heating by helicon waves rather than TG waves since the excitation of TG waves would be suppressed in this special anti-resonance region.
基金supported by Key Program of the National Natural Science Foundation of China (Grant No.92062223)the National Natural Science Foundation of China (Grant No.51804277)Anhui University Natural Science Research Project (KJ20190048)。
文摘In this study, the reaction characteristics of reduction of calcined dolomite with ferrosilicon under argon flow to produce magnesium were studied by conducting experiments Pidgeon pellets were used to study the effect of reduced temperature, argon flow, and reduced time on the conversion of calcined dolomite reduction by ferrosilicon. The results show that the conversion significantly increases with the increase in the reduction temperature and reduction time. The conversion first increases and then decreases with the increase in argon flow. The highest conversion was obtained when the argon flow rate was 3 L·min^(-1), and a nearly spherical shape, nanoscale magnesium powder was obtained. Then the characters of the circulating argon entrainment process were numerically studied by ANSYS Fluent 17. A physical model of multilayer pellet arrangement was established, and a numerical calculation model of chemical reaction, radiation, heat conduction, and convection heat transfer was constructed. This confirms that high-temperature argon can effectively strengthen the heat exchange between pellets, improve the heat transfer efficiency, and facilitate the pellets to react quickly. When the conversion is 80%, the production efficiency increased by about 28.6%. In addition, the magnesium production efficiency showed an increase tendency with the increase of the argon inlet flow rate.
文摘The purpose of this research was to study the effect of Argon inert gas on the laser welding quality of Co-Cr and Ni-Cr base metal alloys, which are widely used as Fixed Prosthodontics alloys in Dental Laboratories. A total of 36 specimens were manufactured (18 of Ni-Cr alloy and 18 of Co-Cr alloy). The specimens were then divided into 3 subgroups (6 specimens each): control;argon-welded;and non-Argon welded. The specimens were cut, laser welded, radiographed and finally tested under tensile strength testing, followed by examination using Scanning Electron Microscopy. The tensile strength of welded specimens was lower than the strength of non-welded specimens, however this difference was not found to be statistically significant. The material factor (Co-Cr alloy or Ni-Cr alloy) has a statistically significant effect on the tensile strength, while the presence or not of the inert gas, as well as the combination of the two factors do not have a statistically significant effect. The laser welding process applied in daily practice (separation of specimen, formation of two cones in contact, aggregation of two cones, filling of the remaining gap by welding) is considered satisfactory in terms of weld strength. The factor of the material, as an independent factor, affects the tensile strength to a statistically significant degree, in contrast to the factor of the presence of inert gas which does not affect to a statistically significant degree.
基金Supported by National Natural Science Foundation of China,No.81573078the National Natural Science Foundation of Guangdong Province,No.2016A030311021
文摘BACKGROUND Chronic radiation proctitis(CRP) is a complication which occurs in 1%-5% of patients who undergo radiotherapy for pelvic malignancies. Although a wide range of therapeutic modalities are available, there is no literature to date showing any particularly appropriate therapeutic modality for each disease stage. Argon plasma coagulation(APC) is currently recommended as the firstchoice treatment for hemorrhagic CRP, however, its indication based on longterm follow-up is still unclear. On the hypothesis that the long-term efficacy and safety of APC are not fully understood, we reviewed APC treatment for patients with hemorrhagic CRP from a single center.AIM To assess the long-term efficacy and safety of APC for hemorrhagic CRP.METHODS This is a retrospective study of consecutive patients treated with APC for hemorrhagic CRP from January 2013 to October 2017. Demographics, clinical variables, and typical endoscopic features were recorded independently. Success was defined as either cessation of bleeding or only occasional traces of bloody stools with no further treatments for at least 12 mo after the last APC treatment.We performed univariate and multivariate analyses to identify factors associated with success and risk factors for fistulas.RESULTS Forty-five patients with a median follow-up period of 24 mo(range: 12-67 mo)were enrolled. Fifteen(33.3%) patients required blood transfusion before APC.Successful treatment with APC was achieved in 31(68.9%) patients. The mean number of APC sessions was 1.3(1-3). Multivariate analysis showed that APC failure was independently associated with telangiectasias present on more than50% of the surface area [odds ratio(OR) = 6.53, 95% confidence interval(CI): 1.09-39.19, P = 0.04] and ulcerated area greater than 1 cm^2(OR = 8.15, 95%CI: 1.63-40.88, P = 0.01). Six(13.3%) patients had severe complications involving rectal fistulation. The only factor significantly associated with severe complications was ulcerated area greater than 1 cm^2(P = 0.035).CONCLUSION The long-term efficacy of APC for hemorrhagic CRP is uncertain in patients with telangiectasias present on > 50% of the surface area and ulceration > 1 cm^2.
基金The Special Basic Research Fund for Central Public Research Institutes (First Institute of Oceanograpgy,State Oceanic Administration)under contract No.GY02 -2008G38the Special Plan of Science and Technology Generalship in Qingdao under contract No.05-2 -JC-79the Special Project of Technical Foundational Work and Social Public Welfare Research under contract No.2003DIB3J114
文摘Based on the isotopic chronologic results of Cenozoic alkali basalts from the South China Sea, the characteristics of volcanic activi- ty of the South China Sea after spreading were studied. The potassium - argon ages of eight alkali basalt samples from the South China Sea, and the argon - argon ages of two samples among them are reported. Apparent ages of the whole rock are 3.80 to 7. 91 Ma with an average value of 5.43 Ma (potassium- argon, whole rock), and there is little difference among samples at the same location, e. g. , 4. 76 - 5.78 Ma for location S(M-12. The argon - argon ages for the two samples are 6.06 and 4. 71 Ma, which lie within the age scope of potassium - argon method. The dating results indicate that rock-forming age is from late Miocene to Pliocene, which is consistent with erupting event for alkali basalts from adjacent regions of the South China Sea. Volcanic activities occur after the cessation of spreading of the South China Sea, which are controlled by lithospheric fault and the spreading center formed during the spreading period of the South China Sea. These dating results, combined with geochemical characteristics of these basalts, the published chronological data for the South China Sea and its adjacent regions, and the updated geophysical data near Hainan Island, suggest that after the cessation of spreading of the South China Sea, there occur widely distributing magmatic activities which primarily is alkali basalt, and the volcanic activity continues to Quaternary. The activity may be relative to Hainan mantle plume originated from core/mantle boundary.
基金supported by the Chinese postdoctoral research fund,Major State Basic Research Program of China(G1999143201)special project of geological sciences(9801)of the State Planning Commission
文摘The Jinding superlarge lead and zinc deposit has attracted the attention of geologists of the world and its metallogenesis has long been in dispute. This paper takes the Jinding deposit and the Baiyangping Cu-Ag-Co deposit which was recently found at about 30 km north of Jinding as one ore belt, and, based on researches on the helium, argon, and xenon isotopic compositions of primary inclusions in ore-forming solutions of the main stage, the authors have found that the 3He/4He ratio of the ore-forming fluid is 2.7×10?6 (varying from 0.19 to 1.97 Ra), the 4He/40Ar ratio (0.24–3.12) is close to the mantle characteristic ratio, and the xenon isotopic composition and evolution show characters of the mantle xenon. The above results reveal the characteristics of mantle source and crust-mantle fluid mixing (mantle helium reaching 32%) and the metallogenic contributions of the deep processes in the Jinding-Baiyangping ore belt.
基金This work was financially supported by the Department of Anesthesiology and Critical Care,Medical Center-University of Freiburg,GermanyThe article processing charge was funded by the Baden-Württemberg Ministry of Science,Research and Art and the University of Freiburg in the funding programme Open Access Publishing.
文摘We previously found that argon exerts its neuroprotective effect in part by inhibition of the toll-like receptors(TLR)2 and 4.The downstream transcription factors signal transducer and activator of transcription 3(STAT3)and nuclear factor kappa B(NF-κB)are also affected by argon and may play a role in neuroprotection.It also has been demonstrated that argon treatment could mitigate brain damage,reduce excessive microglial activation,and subsequently attenuate brain inflammation.Despite intensive research,the further exact mechanism remains unclear.In this study,human neuroblastoma cells were damaged in vitro with rotenone over a period of 4 hours(to mimic cerebral ischemia and reperfusion damage),followed by a 2-hour post-conditioning with argon(75%).In a separate in vivo experiment,retinal ischemia/reperfusion injury was induced in rats by increasing intraocular pressure for 1 hour.Upon reperfusion,argon was administered by inhalation for 2 hours.Argon reduced the binding of the transcription factors signal transducer and activator of transcription 3,nuclear factor kappa B,activator protein 1,and nuclear factor erythroid 2-related factor 2,which are involved in regulation of neuronal damage.Flow cytometry analysis showed that argon downregulated the Fas ligand.Some transcription factors were regulated by toll-like receptors;therefore,their effects could be eliminated,at least in part,by the TLR2 and TLR4 inhibitor oxidized phospholipid 1-palmitoyl-2-arachidonoyl-sn-glycero-3-phosphorylcholine(OxPAPC).Argon treatment reduced microglial activation after retinal ischemia/reperfusion injury.Subsequent quantitative polymerase chain reaction analysis revealed a reduction in the pro-inflammatory cytokines interleukin(IL-1α),IL-1β,IL-6,tumor necrosis factorα,and inducible nitric oxide synthase.Our results suggest that argon reduced the extent of inflammation in retinal neurons after ischemia/reperfusion injury by suppression of transcription factors crucial for microglial activation.Argon has no known side effects or narcotic properties;therefore,therapeutic use of this noble gas appears ideal for treatment of patients with neuronal damage in retinal ischemia/reperfusion injury.The animal experiments were approved by the Commission for Animal Care of the University of Freiburg(approval No.35-9185.81/G14-122)on October 19,2012.
文摘The available studies in the literature on physical and mathematical modeling of the argon oxygen decarburization (AOD) process of stainless steel have briefly been reviewed. The latest advances made by the author with his research group have been summarized. Water modeling was used to investigate the fluid flow and mixing characteristics in the bath of an 18 t AOD vessel, as well as the 'back attack' action of gas jets and its effects on the erosion and wear of the refractory lining, with sufficiently full kinematic similarity. The non rotating and rotating gas jets blown through two annular tuyeres, respectively of straight tube and spiral flat tube type, were employed in the experiments. The geometric similarity ratio between the model and its prototype (including the straight tube type tuyeres) was 1:3. The influences of the gas flow rate, the angle included between the two tuyeres and other operating parameters, and the suitability of the spiral tuyere as a practical application, were examined. These latest studies have clearly and successfully brought to light the fluid flow and mixing characteristics in the bath and the overall features of the back attack phenomena of gas jets during the blowing, and have offered a better understanding of the refining process. Besides, mathematical modeling for the refining process of stainless steel was carried out and a new mathematical model of the process was proposed and developed. The model performs the rate calculations of the refining and the mass and heat balances of the system. Also, the effects of the operating factors, including adding the slag materials, crop ends, and scrap, and alloy agents; the non isothermal conditions; the changes in the amounts of metal and slag during the refining; and other factors were all considered. The model was used to deal with and analyze the austenitic stainless steel making (including ultra low carbon steel) and was tested on data of 32 heats obtained in producing 304 grade steel in an 18 t AOD vessel. The changes in the bath composition and temperature during the refining process with time can be accurately predicted using this model. The model can provide some very useful information and a reliable basis for optimizing the process practice of the refining of stainless steel and control of the process in real time and online.
基金supported by the Major State Basic Research Development Program of China (973 Program) (No. 2011CB20941)Scientific Research Foundation of State Key Lab. of Power Transmission Equipment and System Security of China (No. 2007DA10512709102)+1 种基金National Natural Science Foundation of China (No. 51007096)the Fundamental Research Funds for the Central Universities of China(No. CDJZR10150001)
文摘An improved self-consistent, multi-component, and one-dimensional plasma model for simulating atmospheric pressure argon glow discharge is presented. In the model, both the plasma hydrodynamics model and chemical model are considered. The numerical simulation is carried out for parallel-plate geometry with a separation of 0.06 cm. The results show that Ar* plays a major role in the discharge, which is mainly produced by ground state excitation reaction. The electron temperature reaches its maximum in the cathode sheath but maintains a low value (0.23 eV) in bulk plasma. Elastic collision is the dominant volumetric electron energy loss in atmosphere argon glow discharge, which is negligible in low pressure argon glow discharge. The metastable step-wise ionization is the main mechanism for electron production to sustain the discharge. However, the highest contribution to electron production rate is ground state ionization reaction. The bremsstrahlung power density is related to electric voltage. With the increase of the electric voltage, the bremsstrahlung power density increases, namely, the strength of ultraviolet radiation spectrum enhances in the cathode sheath.
文摘The study on the fluid flow, meniscus oscillation, slag entrapment in continuous casting mould was conducted mathematically and experimentally. The results show that the injection of argon into submerged nozzle enhances the meniscus oscillation, thus increases the probability of slag entrapment, and the critical argon blowing flow rate, which will give rise to slag entrapment, is around 10l/min. The trajectory of bubble is affected by the bubble diameter and the molten steel flow, and the bubble diameter is dominant. The bubble with diameter 1.4mm floats fastest with 0.47m/s terminal velocity.
文摘Inductively coupled plasmas (ICPs) are used in spectrochemical analyses. The introduction of the sample by means of an aerosol are widely used. The introduction and the total evaporation of the aerosol is required in order to obtain a good repeatability and reproducibility of analyses. To check whether the vaporization of the aerosol droplets inside the plasma is completed, a solution could be used to compare the experimental results of the emission spectral lines with theoretical results. An accurate calculation code to obtain monatomic spectral lines intensities is therefore required, which is the purpose of the present paper. The mixtures of argon, water and nitric acid are widely used in spectrochemical analyses with ICPs. With these mixtures, we calculate the composition, thermodynamic functions and monatomic spectral lines intensities of the plasma at thermodynamic equilibrium and at atmospheric pressure. To obtain a self sufficient paper and also to allow other researchers to compare their results, all required data and a robust accurate algorithm, which is simple and easy to compute, are given.
文摘AIM: To compare argon laser photocoagulation and intrastromal injection of voriconazole as adjunctive treatment modalities in cases of resistant mycotic corneal ulcers. METHODS: Two groups each of them included 20 cases of resistant mycotic corneal ulcers. Both groups treated with local and systemic specific antimicrobial drugs guided with culture and sensitivity results. In one group argon laser photocoagulation was used as an adjunctive therapy to the specific antifungal drugs and in the other group, intrastromal injection of voriconazole was done besides the specific antifungal drugs. The 40 cases included in the study were proven according to culture and sensitivity to be 28 cases with pure fungal results and 12 cases with mixed (fungal and bacterial). In argon laser group, argon laser irradiation of the corneal ulcer was performed using argon laser 532 nm wavelength (Carl Zeiss LSL 532s AG; Meditec, Inc.) after fluorescein staining. In the other group, voriconazole solution (500 pg/mL) was prepared and injected in the corneal stroma. All cases were followed up for 3mo after healing was achieved. RESULTS: Complete healing of the epithelial defect and resolution of stromal infiltration with no adverse effects were achieved in argon laser group in duration ranged from 2-4wk in 90% of cases. In voriconazole group 4 cases needed amniotic membrane graft due to thinning and 16 cases healed in duration ranged from 2- 6wk (80% of cases). CONCLUSION: Argon superior to intrastromal treatment of resistant fungal laser photocoagulation is voriconazole injection in corneal ulcers.
文摘With the development of endoscopic therapy,argon plasma coagulation(APC)has been widely used by endoscopists.It has many advantages,such as simple to operate,low cost,and minimal invasiveness.Because of its capability of lesion ablation and hemostasis,APC has several indications in the gastrointestinal tract.One of them is esophageal varices.The aim of this review is to summarize the research on APC in this field to provide a reference for clinical practice.
文摘Prostatic brachytherapy with permanent seed implants is a recent and safe radiation therapy technique associated with radiation-induced digestive disease.Argon plasma coagulation procedure is a validated modality in the management of haemorrhagic radiation proctitis,which is known to occasionally induce chronic rectal ulcers.We report here an original case report of an acute painful rectal ulcer as a consequence of the combination of shortterm therapy with non-steroidal anti-inflammatory drugs therapy,prostatic brachytherapy with malposition of seed implants and argon plasma coagulation procedure in a patient with haemorrhagic radiation proctitis.The description of this clinical observation is essential to recommend the discontinuation of non-steroidal anti-inflammatory drugs therapy and the control of the position of seed implants in case of prostatic brachytherapy before argon plasma coagulation for radiation-induced proctitis.
基金This study was funded by the National Natural Science Foundation of China (grant numbers 40272094, 40672131) We gratefully acknowledge Mr. Luo Xiuquan and Zhang Youquan from the Petroleum Geology Research and Laboratory Center, Institute of Petroleum Exploration and Development, Beijing, for their work on the 40Ar/39Ar analysis.
文摘Bulk separates of porphyroclastic phengite, neoformed phengite and their mixtures from the Tan-Lu HP mylonites overprinted on the Sulu UHP rocks were analyzed with the 40Ar/39Ar step heating method. Two samples of the neoformed phengite from ultramylonite give 40Ar/39Ar plateau ages of 209.9±1.8 Ma and 214.3±1.8 Ma, which are interpreted as representing cooling times of the TanLu sinistral faulting, and provide geochronological evidence for the syn-orogenic faulting of the Tan-Lu fault zone. The results show that the phengite formed during the retrograde eclogite-facies mylonitization was not contaminated with excess argon and can be used for dating the deformation. Argon closure in previous K-bearing minerals with excess argon under a retrograde HP dry condition is considered to be the reason for lack of excess argon incorporation in the neoformed phengite. Five porphyroclastic phengite samples yield 40Ar/39Ar plateau ages ranging from 666±12 Ma to 307.1±3.3 Ma, which are interpreted as being contaminated with excess argon. Two mixture samples with plateau ages of 239.4±2.1 Ma and 239.3±2.0 Ma show upward-convex age spectra caused by the mixture of older porphyroclastic phengite with excess argon incorporation and younger neoformed phengite without excess argon incorporation. It is demonstrated that excess argon introduced from the previous UHP metamorphism is still preserved in the pre-existing phengite after the Tan-Lu eclogite-facies mylonitization. The intense deformation under HT and HP conditions cannot erase excess argon in the previous phengite totally due to restricted fluid activities. These porphyroclastic phengite previously contaminated with excess argon cannot be used for dating the later HP deformation. This indicates that deformation under a HP dry condition does not play an important role in removing previous 40Are in phengite.