Arsenic is one of the main harmful elements in industrial wastewater.How to remove arsenic has always been one of the research hotspots in academic circles.In the process of arsenic removal by traditional sulfuration,...Arsenic is one of the main harmful elements in industrial wastewater.How to remove arsenic has always been one of the research hotspots in academic circles.In the process of arsenic removal by traditional sulfuration,the use of traditional sulfurizing agent will introduce new metal cations,which will affect the recycling of acid.In this study,phosphorus pentasulfide (P_(2)S_(5)) was used as sulfurizing agent,which hydrolyzed to produce H_(3)PO_(4) and H_(2)S without introducing new metal cations.The effect of ultrasound on arsenic removal by P_(2)S_(5) was studied.Under the action of ultrasound,the utilization of P_(2)S_(5) was improved and the reaction time was shortened.The effects of S/As molar ratio and reaction time on arsenic removal rate were investigated under ultrasonic conditions.Ultrasonic enhanced heat and mass transfer so that the arsenic removal rate of 94.5%could be achieved under the conditions of S/As molar ratio of 2.1:1 and reaction time of 20 min.In the first 60 min,under the same S/As molar ratio and reaction time,the ultrasonic hydrolysis efficiency of P_(2)S_(5) was higher.This is because P_(2)S_(5) forms ([(P_(2)S_(4))])^(2+)under the ultrasonic action,and the structure is damaged,which is easier to be hydrolyzed.In addition,the precipitation after arsenic removal was characterized and analyzed by X-ray diffraction,scanning electron microscope-energy dispersive spectrometer,X-ray fluorescence spectrometer and X-ray photoelectron spectroscopy.Our research avoids the introduction of metal cations in the arsenic removal process,and shortens the reaction time.展开更多
The adsorption potential of titanium dioxide (TiO2) nanoparticles for removing arsenic from drinking water was evaluated. Pure and iron-doped TiO2 particles are synthesized via sol-gel method. The synthesized TiO2 n...The adsorption potential of titanium dioxide (TiO2) nanoparticles for removing arsenic from drinking water was evaluated. Pure and iron-doped TiO2 particles are synthesized via sol-gel method. The synthesized TiO2 nanoparticles were then immobilized on ordinary sand for adsorption studies. Adsorption isotherms were conducted on the synthesized nanoparticles as well as the sand coated with TiO2 nanoparticles under varying conditions of air and light, namely, the air-sunlight (A-SL), air-light (AL), air-dark (AD) and nitrogen-dark (ND). X-ray diffraction (XRD) analysis showed that the pure and iron-doped TiO2 nanoparticles were in 100% anatase crystalline phase with crystai sizes of 108 and 65 nm, respectively. Adsorption of arsenic on the three adsorbents was non-linear that could be described by the Freundlich and Langmuir adsorption models. Iron doping enhanced the adsorption capacity of TiO2 nanoparticles by arresting the grain growth and making it visible light responsive resulting in a higher affinity for arsenic. Similarly, the arsenic removal by adsorption on the sand coated with TiO2 nanoparticles was the highest among the three types of sand used. In all cases, As(V) was adsorbed more compared with As(Ⅲ). The solution pH appeared to be the most important factor in controlling the amount of arsenic adsorbed.展开更多
This work describes the experimental results of pyrometallurgical removing of arsenic from the dust collected in the electrostatic copper precipitators within the gas cleaning system of a Copper Flash Smelting Furnace...This work describes the experimental results of pyrometallurgical removing of arsenic from the dust collected in the electrostatic copper precipitators within the gas cleaning system of a Copper Flash Smelting Furnace. The generation of dust in the copper smelting worldwide ranges from 2 - 15 wt% per ton of a copper concentrate. In Chile, copper smelters produce approximately 110 kt/y of dust with a concentration of arsenic between 1 and 15 wt%. The dust is a complex of metals oxides and sulfurs with copper concentrations greater than 10 wt% and relatively high silver concentrations. Since its high arsenic concentration, it is difficult to recover valuable metals through hydrometallurgical processes or by direct recirculation of the dust in a smelting furnace. Thus, the development of pyrometallurgical processes aimed at reducing the concentration of arsenic in the dust (<0.5 wt%) is the main objective of this study, giving particular attention to the production of a suitable material to be recirculated in operations of copper smelting. The work provides a detailed characterization of the dust including the Quantitative Evaluation of Minerals by Scanning Electron Microscopy (QEMSCAN), Scanning Electron Microscope-Energy Dispersive X-ray Analysis (SEM/EDS), X-Ray Diffraction (XRD), the elemental chemical analysis using Atomic Adsorption (AAS), and X-Ray Fluorescence (X-RF). By considering that arsenic volatilization requires a process of sulfidation-decomposition-oxidation, this work seeks to explore the roasting of mixtures of copper concentrate/dust, sulfur/dust, and pyrrhotite/dust. By the elemental chemical analysis of the mixture after and before the roasting process, the degree of arsenic volatilization was determined. The results indicated the effects of parameters such as roasting temperature, gas flow, gas composition, and the ratio of mixtures (concentrate/dust, sulfur/dust, or pyrrhotite/dust) on the volatilization of arsenic. According to the findings, the concentration of arsenic in the roasted Flash Smelting dust can be reduced to a relatively low level (<0.5 wt%), which allows its recirculation into an smelting process.展开更多
Arsenic is a natural tasteless and odourless element,existing in the earth's crust at average levels of between two and five thousands micrograms per liter (parts per million) . Arsenic is highly toxic to humans, ...Arsenic is a natural tasteless and odourless element,existing in the earth's crust at average levels of between two and five thousands micrograms per liter (parts per million) . Arsenic is highly toxic to humans, who are exposed to it primarily from air,food and water. The occurrence of arsenic in groundwater is due to geological composition of soil. High concentrations of arsenic in water are the result of dissolution or desorption of ferric oxides and the oxidation of mineral arsenopyrites. Arsenic in drinking water has an important impact on the human health,especially in the less developed countries. Different methods exist to remove arsenic from aquatic media,and one of them is by adsorption. In this work,the adsorption of both As(III) and As(V) by means of novel microspheres has been investigated. In particular,TiO2 has been embedded into polymeric microspheres PES (PolyEtherSulphone) and PEEK-WC (PolyEtherEther-Ketone) . The main advantages of this encapsulation adsorption material are: no loss of adsorbents into the water stream,easy to be used and scaled-up.展开更多
This paper describes the experimental results of removing arsenic from the dust collected in electrostatic precipitators of a fluidized bed roasting furnace (RP dust). The fluidized bed roasting process generates 600 ...This paper describes the experimental results of removing arsenic from the dust collected in electrostatic precipitators of a fluidized bed roasting furnace (RP dust). The fluidized bed roasting process generates 600 kilotons of copper concentrate per year with 3 - 6 wt% of concentration of arsenic, producing a roasted product with a low content of arsenic below 0.3 wt%. The process generates 27 kilotons of RP dust per year with a concentration of arsenic of the order of 5 wt% and copper concentration of around 20 wt%. Subsequently, the dust collected in the electrostatic precipitators is treated by hydrometallurgical methods allowing the recovery of copper, and the disposition of arsenic as scorodite. This work proposes to use a pyrometallurgy process to the volatilization of arsenic from RP dust. The obtained material can be recirculated in copper smelting furnaces allowing the recovery of valuable metals. The set of experiments carried out in the roasting of the mixture of copper concentrate/RP dust and sulfur/RP dust used different ratios of mixtures, temperatures and roasting times. By different techniques, the characterization of the RP dust determined its size distribution, morphology, and chemical and mineralogical composition. RP dust is a composite material of small particles (<5 μm) in 50 μm agglomerates, mostly amorphous, with a complex chemical composition of sulfoxides. The results of the roasting experiments indicated that for a 75/25 weight ratio of the mixture of the copper concentrate/PR dust under 700℃, 15 minutes of roasting time with injection of air, the volatilization of arsenic reached 96% by weight. The arsenic concentration after the roasting process is less than 0.3% by weight. For a 5/95 mixture of sulfur/RP dust, at 650℃, the volatilization of arsenic reached a promissory result of 67%. Even that this study was carried out for a particular operation, the results have the potential to be extended to dust produced in the roasting of concentrates of nickel, lead-zinc, and gold.展开更多
The study reports aspects that allowed to correlate structural and redox properties of iron species deposited on clay minerals with the capacity of geomaterials for arsenic removal. Natural ferruginous clays as well a...The study reports aspects that allowed to correlate structural and redox properties of iron species deposited on clay minerals with the capacity of geomaterials for arsenic removal. Natural ferruginous clays as well as an iron-poor clay chemically modified with Fe(III) salt (ferrihydrite species) were investigated as adsorbents of the arsenate(V) in water. The study, carried out from minerals from abundant Argentinean deposits, was conducted with the aid of different techniques such as X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM-EDS), Raman Spectroscopy, ICP-AES (Inductively Coupled Plasma) chemical analysis and Temperature Programmed Reduction (TPR). This last technique allowed to detect availability of iron species in oxidic environment with different structural complexity and to determine active sites, accessible for arsenate(V) adsorption. The effect was observed through temperature dependence of the first Fe(III) reduction step (below 570°C) of iron-oxide species. The sequence of reducibility: ferrihydrite > hydrous oxide (goethite) > anhydrous oxide (hematite) > structural iron in clay was in agreement with the availability of iron active sites for the reducing process as well as for the arsenate adsorption. The important role of very high iron content in original samples was also observed. The chemical activation of iron-poor clay by a simple and feasible modification with Fe(III) solutions promoted the deposition of the ferrihydrite active phase with an increase of 2.81% (expressed as Fe2O3) respect to the original content of 1.07%, constituting an accessible and eco-friendly technological alternative to solve the environmental problem of water containing arsenic.展开更多
An effective adsorbent for arsenic removal was synthesized by hydrothermal treatment of waste glass powder (GP), followed by loading Fe(Ⅲ) oxyhydroxide onto the surface of waste glass powder. The =Si-O-H group wa...An effective adsorbent for arsenic removal was synthesized by hydrothermal treatment of waste glass powder (GP), followed by loading Fe(Ⅲ) oxyhydroxide onto the surface of waste glass powder. The =Si-O-H group was formed on the surface of GP and the specific surface area of GP powder was slightly increased after hydrothermal treatment. FeOOH was loaded onto the surface of hydrothermally treated waste glass powder (HGP) by the hydrolysis of FeC13. The formation conditions of FeOOH were also investigated. The ability of this new adsorbent for arsenic (As(V)) removal was evaluated. The results indicated that the highest removal efficiency was about 97% for 1 mg/L As(V) solution at pH 6 and keeping time 2 h.展开更多
This study focuses on the synthesis of nanocomposites named CCA and CZA that were prepared by the incorporation of cellulose(CL)in the Ca/Al and Zn/Al layered double hydroxide(LDH),respectively.These materials were th...This study focuses on the synthesis of nanocomposites named CCA and CZA that were prepared by the incorporation of cellulose(CL)in the Ca/Al and Zn/Al layered double hydroxide(LDH),respectively.These materials were then used for the uptake of As(Ⅲ)and As(V)from aqueous medium.Characterization of both nanocomposites(CCA and CZA)was done using FTIR and Raman analysis to identify the functional groups,N2 adsorption-desorption isotherms to determine the specific surface area and pore geometry and XPS analysis to obtain the surface atomic composition.Some other characters were investigated using simultaneous TGA and DTA and elemental chemical analysis(CHNS/O).The crystallinity of the prepared nanocomposites was displayed by XRD patterns.Furthermore,the sheet-like structure of the LDHs and the irregularity of surface morphology with porous structure were observed by TEM and SEM microphotographs.Optimization of maximum adsorption capacity was adjusted using different parameters including pH,contact time and adsorbent dosage.The pseudo-second-order model was in good fitting with kinetics results.The adsorption isotherm results showed that CZA exhibits better adsorption capacity for As(Ⅲ)than CCA and the Langmuir isotherm model described the data well for both nanocomposites.Thermodynamic studies illustrated the endothermic nature of CCA and exothermic nature on CZA,as well as the fact that the adsorption process is spontaneous.A real water sample collected from well located in Gabes(Tunisia),has also been treated.The obtained experimental results were confirmed that these sorbents are efficient for the treatment of hazardous toxic species such as.展开更多
Hydrated ferric oxide(HFO)has high adsorption efficiency for As(Ⅲ).However,its high self-aggregation usually reduces the efficiency and limits the scaledup application.Herein,biochar(BC),with large surface area and a...Hydrated ferric oxide(HFO)has high adsorption efficiency for As(Ⅲ).However,its high self-aggregation usually reduces the efficiency and limits the scaledup application.Herein,biochar(BC),with large surface area and amounts of surface functional groups was used to tune the loading and distribution of HFO to prepare an efficient adsorbent(HFO/BC)via in-situ synthesis method.The influence of the mass ratio of iron salt to BC on HFO/BC morphology was investigated,and the mechanism was discussed.The results showed that novel HFO was formed and distributed uniformly on the surface of BC when the mass ratio of iron salt to BC was 5:1.The adsorption kinetics and isotherms studies show that the novel HFO/BC(5:1)composite can fast treat As(Ⅲ)with a high adsorption capacity of 104.55 mg·g^(-1),indicating that it is a potential material for removing arsenic from polluted water.展开更多
The removal of As(V) from synthetic water was studied using four different nanofiltration (NF) membranes (ESNA-1-K1, NF270, ESNA-1-LF, and HODRA-CORE). The influences of ion concentration, transmembrane pressure...The removal of As(V) from synthetic water was studied using four different nanofiltration (NF) membranes (ESNA-1-K1, NF270, ESNA-1-LF, and HODRA-CORE). The influences of ion concentration, transmembrane pressure (TMP), and the presence of natural organic matter (humic acid, HA) on the arsenic removal efficiency and permeate flux were investigated. The arsenic rejection of ESNA- 1-LF was higher than those of the other membranes in all experiments (〉 94%), and the HODRA-CORE membrane gave the lowest removal of arsenic (〈 47%). An increase in the ion concentration in the feed solution and addition of HA decreased the arsenic rejection of the HODRA-CORE membrane. However, both increasing of the ion concentration and addition of HA made the rejection increased for the other membranes (ESNA-1-K1, NF270, and ESNA-1-LF). With increasing TMP, for all four NF membranes, increases in both arsenic rejection and permeate flux were observed. The permeate fluxes of the four NF membranes decreased to some extent after addition of HA to the solutions for operating time of 6 hr.展开更多
Although large amounts of engineered nanomaterials have been used for the arsenic removal, today there still remains several serious impediments to its further application, including consumption of expensive and pure ...Although large amounts of engineered nanomaterials have been used for the arsenic removal, today there still remains several serious impediments to its further application, including consumption of expensive and pure salts, and only application for the removal of inorganic arsenic. In this work, we developed an eco-economic and facile electrochemical method to synthesize iron porous coordination polymers (FePCPs) for the simultaneous removal of inorganic and organic arsenic from natural water.展开更多
To meet the challenges posed by global arsenic water contamination, the Mg Al Mn-LDHs with extraordinary efficiency of arsenate removal was developed. In order to clarify the enhancement effect of the doped-Mn on the ...To meet the challenges posed by global arsenic water contamination, the Mg Al Mn-LDHs with extraordinary efficiency of arsenate removal was developed. In order to clarify the enhancement effect of the doped-Mn on the arsenate removal performance of the LDHs, the cluster models of the Mg Al Mn-LDHs and Mg Al-LDHs were established and calculated by using density functional theory(DFT). The results shown that the doped-Mn can significantly change the electronic structure of the LDHs and improve its chemical activity. Compared with the Mg Al-LDHs that without the doped-Mn, the HOMO-LUMO gap was smaller after doping. In addition, the-OH and Al on the laminates were also activated to improve the adsorption property of the LDHs. Besides, the doped-Mn existed as a novel active site. On the other hand, the Mg Al Mn-LDHs with the doped-Mn, the increased of the binding energy, as well as the decreased of the ion exchange energy of interlayer Cl^(-), making the ability to arsenate removal had been considerably elevated than the Mg Al-LDHs. Furthermore, there is an obvious coordination covalent bond between arsenate and the laminates of the Mg Al MnLDHs that with the doped-Mn.展开更多
Chromium and/or arsenate removal by Fe(Ⅱ) as a function of pH, Fe(Ⅱ) dosage and initial Cr(Ⅵ)/As(Ⅴ) ratio were examined in batch tests. The presence of arsenate reduced the removal efficiency of chromium b...Chromium and/or arsenate removal by Fe(Ⅱ) as a function of pH, Fe(Ⅱ) dosage and initial Cr(Ⅵ)/As(Ⅴ) ratio were examined in batch tests. The presence of arsenate reduced the removal efficiency of chromium by Fe(Ⅱ), while the presence of chromate significantly increased the removal efficiency of arsenate by Fe(Ⅱ) at pH 6-8, In the absence of arsenate, chromium removal by Fe(Ⅱ) increased to a maximum with increasing pH from 4 to 7 and then decreased with a further increase in pH. The increment in Fe(Ⅱ) dosage resulted in an improvement in chromium removal and the improvement was more remarkable under alkaline conditions than that under acidic conditions. Chromium removal by Fe(Ⅱ) was reduced to a larger extent under neutral and alkaline conditions than that under acidic conditions due to the presence of 10 μtmol/L arsenate. The presence of 20 μmol/L arsenate slightly improved chromium removal by Fe(Ⅱ) at pH 3.9-5,8, but had detrimental effects at pH 6.7-9.8. Arsenate removal was improved significantly at pH 4-9 due to the presence of 10μmol/L chromate at Fe(Ⅱ) dosages of 20-60 μmol/L. Elevating the chromate concentration from 10 to 20μmol/L resulted in a further improvement in arsenate removal at pH 4.0-4.6 when Fe(Ⅱ) was dosed at 30-60 μmol/L.展开更多
The removal of As(III) and As(V) from aqueous solution was investigated using waste cast iron, which is a byproduct of the iron casting process in foundries. Two types of waste cast iron were used in the experimen...The removal of As(III) and As(V) from aqueous solution was investigated using waste cast iron, which is a byproduct of the iron casting process in foundries. Two types of waste cast iron were used in the experiment: grind precipitate dust (GPD) and cast iron shot (CIS). The X-ray diffraction analysis indicated the presence of Fe~ on GPD and CIS. Batch experiments were performed under different concentrations of As(III) and As(V) and at various initial pH levels. Results showed that waste cast iron was effective in the removal of arsenic. The adsorption isotherm study indicated that the Langmuir isotherm was better than the Freundlich isotherm at describing the experimental result. In the adsorption of both As(III) and As(V), the adsorption capacity of GPD was greater than CIS, mainly due to the fact that GPD had higher surface area and weight percent of Fe than CIS. Results also indicated the removal of As(III) and As(V) by GPD and CIS was influenced by the initial solution pH, generally decreasing with increasing pH from 3.0 to 10.5. In addition, both GPD and CIS were more effective at the removal of As(III) than As(V) under given experimental conditions. This study demonstrates that waste cast iron has potential as a reactive material to treat wastewater and groundwater containing arsenic.展开更多
Arsenic is one of the most common inorganic contaminants in groundwater worldwide,mainly due to the release of naturally occurring arsenic from aquifer sediments(Amini et al.,2008;Li and Cai,2015;Rahman et al.,2015)...Arsenic is one of the most common inorganic contaminants in groundwater worldwide,mainly due to the release of naturally occurring arsenic from aquifer sediments(Amini et al.,2008;Li and Cai,2015;Rahman et al.,2015).Naturally occurring arsenic exists predominantly in arsenate and arsenite species in groundwater.展开更多
In this study, a commercial cube-shaped open-celled cellulose sponge adsorbent was modified by in-situ co-precipitation of superparamagnetic iron oxide nanoparticles(SPION) and used to remove As(V) from aqueous soluti...In this study, a commercial cube-shaped open-celled cellulose sponge adsorbent was modified by in-situ co-precipitation of superparamagnetic iron oxide nanoparticles(SPION) and used to remove As(V) from aqueous solutions. Fe K-edge X-ray absorption spectroscopy(XAS) and TEM identified maghemite as the main iron phase of the SPION nanoparticles with an average size 13 nm. Batch adsorption experiments at 800 mg/L showed a 63% increase of adsorption capacity when loading 2.6 wt.% mass fraction of SPION in the cube-sponge.Experimental determination of the adsorption thermodynamic parameters indicated that the As(V) adsorption on the composite material is a spontaneous and exothermic process.As K-edge XAS results confirmed that the adsorption enhancement on the composite can be attributed to the nanoparticles loaded. In addition, adsorbed As(V) did not get reduced to more toxic As(Ⅲ) and formed a binuclear corner-sharing complex with SPION. The advantageous cube-shape of the sponge-loaded SPION composite together with its high affinity and good adsorption capacity for As(V), good regeneration capability and the enhanceddiffusion attributed to its open-celled structure make this adsorbent a good candidate for industrial applications.展开更多
基金support of the Basic Research Project of Science and Technology Planning Project of Yunnan Provincial Department of Science and Technology (202201AS070031)Yunnan Pronince Top young talents of The Ten Thousand Project+4 种基金the central government guides local science and technology development projects (CB22005R006A)the National Key Research and Development Program of China (2019YFC1904204)Kunming Key Laboratory of Special MetallurgyKunming Academician Workstation of Advanced Preparation for Super hard Materials FieldKunming Academician Workstation of Metallurgical Process Intensification。
文摘Arsenic is one of the main harmful elements in industrial wastewater.How to remove arsenic has always been one of the research hotspots in academic circles.In the process of arsenic removal by traditional sulfuration,the use of traditional sulfurizing agent will introduce new metal cations,which will affect the recycling of acid.In this study,phosphorus pentasulfide (P_(2)S_(5)) was used as sulfurizing agent,which hydrolyzed to produce H_(3)PO_(4) and H_(2)S without introducing new metal cations.The effect of ultrasound on arsenic removal by P_(2)S_(5) was studied.Under the action of ultrasound,the utilization of P_(2)S_(5) was improved and the reaction time was shortened.The effects of S/As molar ratio and reaction time on arsenic removal rate were investigated under ultrasonic conditions.Ultrasonic enhanced heat and mass transfer so that the arsenic removal rate of 94.5%could be achieved under the conditions of S/As molar ratio of 2.1:1 and reaction time of 20 min.In the first 60 min,under the same S/As molar ratio and reaction time,the ultrasonic hydrolysis efficiency of P_(2)S_(5) was higher.This is because P_(2)S_(5) forms ([(P_(2)S_(4))])^(2+)under the ultrasonic action,and the structure is damaged,which is easier to be hydrolyzed.In addition,the precipitation after arsenic removal was characterized and analyzed by X-ray diffraction,scanning electron microscope-energy dispersive spectrometer,X-ray fluorescence spectrometer and X-ray photoelectron spectroscopy.Our research avoids the introduction of metal cations in the arsenic removal process,and shortens the reaction time.
文摘The adsorption potential of titanium dioxide (TiO2) nanoparticles for removing arsenic from drinking water was evaluated. Pure and iron-doped TiO2 particles are synthesized via sol-gel method. The synthesized TiO2 nanoparticles were then immobilized on ordinary sand for adsorption studies. Adsorption isotherms were conducted on the synthesized nanoparticles as well as the sand coated with TiO2 nanoparticles under varying conditions of air and light, namely, the air-sunlight (A-SL), air-light (AL), air-dark (AD) and nitrogen-dark (ND). X-ray diffraction (XRD) analysis showed that the pure and iron-doped TiO2 nanoparticles were in 100% anatase crystalline phase with crystai sizes of 108 and 65 nm, respectively. Adsorption of arsenic on the three adsorbents was non-linear that could be described by the Freundlich and Langmuir adsorption models. Iron doping enhanced the adsorption capacity of TiO2 nanoparticles by arresting the grain growth and making it visible light responsive resulting in a higher affinity for arsenic. Similarly, the arsenic removal by adsorption on the sand coated with TiO2 nanoparticles was the highest among the three types of sand used. In all cases, As(V) was adsorbed more compared with As(Ⅲ). The solution pH appeared to be the most important factor in controlling the amount of arsenic adsorbed.
文摘This work describes the experimental results of pyrometallurgical removing of arsenic from the dust collected in the electrostatic copper precipitators within the gas cleaning system of a Copper Flash Smelting Furnace. The generation of dust in the copper smelting worldwide ranges from 2 - 15 wt% per ton of a copper concentrate. In Chile, copper smelters produce approximately 110 kt/y of dust with a concentration of arsenic between 1 and 15 wt%. The dust is a complex of metals oxides and sulfurs with copper concentrations greater than 10 wt% and relatively high silver concentrations. Since its high arsenic concentration, it is difficult to recover valuable metals through hydrometallurgical processes or by direct recirculation of the dust in a smelting furnace. Thus, the development of pyrometallurgical processes aimed at reducing the concentration of arsenic in the dust (<0.5 wt%) is the main objective of this study, giving particular attention to the production of a suitable material to be recirculated in operations of copper smelting. The work provides a detailed characterization of the dust including the Quantitative Evaluation of Minerals by Scanning Electron Microscopy (QEMSCAN), Scanning Electron Microscope-Energy Dispersive X-ray Analysis (SEM/EDS), X-Ray Diffraction (XRD), the elemental chemical analysis using Atomic Adsorption (AAS), and X-Ray Fluorescence (X-RF). By considering that arsenic volatilization requires a process of sulfidation-decomposition-oxidation, this work seeks to explore the roasting of mixtures of copper concentrate/dust, sulfur/dust, and pyrrhotite/dust. By the elemental chemical analysis of the mixture after and before the roasting process, the degree of arsenic volatilization was determined. The results indicated the effects of parameters such as roasting temperature, gas flow, gas composition, and the ratio of mixtures (concentrate/dust, sulfur/dust, or pyrrhotite/dust) on the volatilization of arsenic. According to the findings, the concentration of arsenic in the roasted Flash Smelting dust can be reduced to a relatively low level (<0.5 wt%), which allows its recirculation into an smelting process.
文摘Arsenic is a natural tasteless and odourless element,existing in the earth's crust at average levels of between two and five thousands micrograms per liter (parts per million) . Arsenic is highly toxic to humans, who are exposed to it primarily from air,food and water. The occurrence of arsenic in groundwater is due to geological composition of soil. High concentrations of arsenic in water are the result of dissolution or desorption of ferric oxides and the oxidation of mineral arsenopyrites. Arsenic in drinking water has an important impact on the human health,especially in the less developed countries. Different methods exist to remove arsenic from aquatic media,and one of them is by adsorption. In this work,the adsorption of both As(III) and As(V) by means of novel microspheres has been investigated. In particular,TiO2 has been embedded into polymeric microspheres PES (PolyEtherSulphone) and PEEK-WC (PolyEtherEther-Ketone) . The main advantages of this encapsulation adsorption material are: no loss of adsorbents into the water stream,easy to be used and scaled-up.
文摘This paper describes the experimental results of removing arsenic from the dust collected in electrostatic precipitators of a fluidized bed roasting furnace (RP dust). The fluidized bed roasting process generates 600 kilotons of copper concentrate per year with 3 - 6 wt% of concentration of arsenic, producing a roasted product with a low content of arsenic below 0.3 wt%. The process generates 27 kilotons of RP dust per year with a concentration of arsenic of the order of 5 wt% and copper concentration of around 20 wt%. Subsequently, the dust collected in the electrostatic precipitators is treated by hydrometallurgical methods allowing the recovery of copper, and the disposition of arsenic as scorodite. This work proposes to use a pyrometallurgy process to the volatilization of arsenic from RP dust. The obtained material can be recirculated in copper smelting furnaces allowing the recovery of valuable metals. The set of experiments carried out in the roasting of the mixture of copper concentrate/RP dust and sulfur/RP dust used different ratios of mixtures, temperatures and roasting times. By different techniques, the characterization of the RP dust determined its size distribution, morphology, and chemical and mineralogical composition. RP dust is a composite material of small particles (<5 μm) in 50 μm agglomerates, mostly amorphous, with a complex chemical composition of sulfoxides. The results of the roasting experiments indicated that for a 75/25 weight ratio of the mixture of the copper concentrate/PR dust under 700℃, 15 minutes of roasting time with injection of air, the volatilization of arsenic reached 96% by weight. The arsenic concentration after the roasting process is less than 0.3% by weight. For a 5/95 mixture of sulfur/RP dust, at 650℃, the volatilization of arsenic reached a promissory result of 67%. Even that this study was carried out for a particular operation, the results have the potential to be extended to dust produced in the roasting of concentrates of nickel, lead-zinc, and gold.
文摘The study reports aspects that allowed to correlate structural and redox properties of iron species deposited on clay minerals with the capacity of geomaterials for arsenic removal. Natural ferruginous clays as well as an iron-poor clay chemically modified with Fe(III) salt (ferrihydrite species) were investigated as adsorbents of the arsenate(V) in water. The study, carried out from minerals from abundant Argentinean deposits, was conducted with the aid of different techniques such as X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM-EDS), Raman Spectroscopy, ICP-AES (Inductively Coupled Plasma) chemical analysis and Temperature Programmed Reduction (TPR). This last technique allowed to detect availability of iron species in oxidic environment with different structural complexity and to determine active sites, accessible for arsenate(V) adsorption. The effect was observed through temperature dependence of the first Fe(III) reduction step (below 570°C) of iron-oxide species. The sequence of reducibility: ferrihydrite > hydrous oxide (goethite) > anhydrous oxide (hematite) > structural iron in clay was in agreement with the availability of iron active sites for the reducing process as well as for the arsenate adsorption. The important role of very high iron content in original samples was also observed. The chemical activation of iron-poor clay by a simple and feasible modification with Fe(III) solutions promoted the deposition of the ferrihydrite active phase with an increase of 2.81% (expressed as Fe2O3) respect to the original content of 1.07%, constituting an accessible and eco-friendly technological alternative to solve the environmental problem of water containing arsenic.
基金supported by the National Science and Technology Pillar Program in the Eleventh Five-Year Plan Period (No. 2006BAF02A28)the Science Research Fund of ShaanXi University of Science and Technology(No. ZX07-14)
文摘An effective adsorbent for arsenic removal was synthesized by hydrothermal treatment of waste glass powder (GP), followed by loading Fe(Ⅲ) oxyhydroxide onto the surface of waste glass powder. The =Si-O-H group was formed on the surface of GP and the specific surface area of GP powder was slightly increased after hydrothermal treatment. FeOOH was loaded onto the surface of hydrothermally treated waste glass powder (HGP) by the hydrolysis of FeC13. The formation conditions of FeOOH were also investigated. The ability of this new adsorbent for arsenic (As(V)) removal was evaluated. The results indicated that the highest removal efficiency was about 97% for 1 mg/L As(V) solution at pH 6 and keeping time 2 h.
文摘This study focuses on the synthesis of nanocomposites named CCA and CZA that were prepared by the incorporation of cellulose(CL)in the Ca/Al and Zn/Al layered double hydroxide(LDH),respectively.These materials were then used for the uptake of As(Ⅲ)and As(V)from aqueous medium.Characterization of both nanocomposites(CCA and CZA)was done using FTIR and Raman analysis to identify the functional groups,N2 adsorption-desorption isotherms to determine the specific surface area and pore geometry and XPS analysis to obtain the surface atomic composition.Some other characters were investigated using simultaneous TGA and DTA and elemental chemical analysis(CHNS/O).The crystallinity of the prepared nanocomposites was displayed by XRD patterns.Furthermore,the sheet-like structure of the LDHs and the irregularity of surface morphology with porous structure were observed by TEM and SEM microphotographs.Optimization of maximum adsorption capacity was adjusted using different parameters including pH,contact time and adsorbent dosage.The pseudo-second-order model was in good fitting with kinetics results.The adsorption isotherm results showed that CZA exhibits better adsorption capacity for As(Ⅲ)than CCA and the Langmuir isotherm model described the data well for both nanocomposites.Thermodynamic studies illustrated the endothermic nature of CCA and exothermic nature on CZA,as well as the fact that the adsorption process is spontaneous.A real water sample collected from well located in Gabes(Tunisia),has also been treated.The obtained experimental results were confirmed that these sorbents are efficient for the treatment of hazardous toxic species such as.
基金the National Natural Science Foundation of China(No.52173208)the Priority Academic Program Development of Jiangsu Higher Education Institutions and Qing Lan Project of Yangzhou University(Dr.LJL)。
文摘Hydrated ferric oxide(HFO)has high adsorption efficiency for As(Ⅲ).However,its high self-aggregation usually reduces the efficiency and limits the scaledup application.Herein,biochar(BC),with large surface area and amounts of surface functional groups was used to tune the loading and distribution of HFO to prepare an efficient adsorbent(HFO/BC)via in-situ synthesis method.The influence of the mass ratio of iron salt to BC on HFO/BC morphology was investigated,and the mechanism was discussed.The results showed that novel HFO was formed and distributed uniformly on the surface of BC when the mass ratio of iron salt to BC was 5:1.The adsorption kinetics and isotherms studies show that the novel HFO/BC(5:1)composite can fast treat As(Ⅲ)with a high adsorption capacity of 104.55 mg·g^(-1),indicating that it is a potential material for removing arsenic from polluted water.
基金supported by the National Natural Science Foundation of China (No.21176245, 50978245)the National Science and Technology Support Program of China (No.2012BAJ25B02, 2012BAJ25B06)the High Technology Research and Development Program (863) of China (No.2009AA062901)
文摘The removal of As(V) from synthetic water was studied using four different nanofiltration (NF) membranes (ESNA-1-K1, NF270, ESNA-1-LF, and HODRA-CORE). The influences of ion concentration, transmembrane pressure (TMP), and the presence of natural organic matter (humic acid, HA) on the arsenic removal efficiency and permeate flux were investigated. The arsenic rejection of ESNA- 1-LF was higher than those of the other membranes in all experiments (〉 94%), and the HODRA-CORE membrane gave the lowest removal of arsenic (〈 47%). An increase in the ion concentration in the feed solution and addition of HA decreased the arsenic rejection of the HODRA-CORE membrane. However, both increasing of the ion concentration and addition of HA made the rejection increased for the other membranes (ESNA-1-K1, NF270, and ESNA-1-LF). With increasing TMP, for all four NF membranes, increases in both arsenic rejection and permeate flux were observed. The permeate fluxes of the four NF membranes decreased to some extent after addition of HA to the solutions for operating time of 6 hr.
基金the National Natural Science Foundation of China (Nos. 21575092 and 21622508) for financial support
文摘Although large amounts of engineered nanomaterials have been used for the arsenic removal, today there still remains several serious impediments to its further application, including consumption of expensive and pure salts, and only application for the removal of inorganic arsenic. In this work, we developed an eco-economic and facile electrochemical method to synthesize iron porous coordination polymers (FePCPs) for the simultaneous removal of inorganic and organic arsenic from natural water.
基金supported by the Natural Science Foundation of China (No. 51974379)the National Key R&D Program of China (No. 2017YFC0210401)+1 种基金the National Science Fund for Distinguished Young Scholars (No. 51825403)The Key Projects of Science and Technology of Hunan Province (No. 2017SK2420)。
文摘To meet the challenges posed by global arsenic water contamination, the Mg Al Mn-LDHs with extraordinary efficiency of arsenate removal was developed. In order to clarify the enhancement effect of the doped-Mn on the arsenate removal performance of the LDHs, the cluster models of the Mg Al Mn-LDHs and Mg Al-LDHs were established and calculated by using density functional theory(DFT). The results shown that the doped-Mn can significantly change the electronic structure of the LDHs and improve its chemical activity. Compared with the Mg Al-LDHs that without the doped-Mn, the HOMO-LUMO gap was smaller after doping. In addition, the-OH and Al on the laminates were also activated to improve the adsorption property of the LDHs. Besides, the doped-Mn existed as a novel active site. On the other hand, the Mg Al Mn-LDHs with the doped-Mn, the increased of the binding energy, as well as the decreased of the ion exchange energy of interlayer Cl^(-), making the ability to arsenate removal had been considerably elevated than the Mg Al-LDHs. Furthermore, there is an obvious coordination covalent bond between arsenate and the laminates of the Mg Al MnLDHs that with the doped-Mn.
基金supported by the National Natural Science Foundation of China (No. 50908060,50821002)the Ph.D Program Foundation of Ministry of Education of China for New Faculty (No. 200802131053)
文摘Chromium and/or arsenate removal by Fe(Ⅱ) as a function of pH, Fe(Ⅱ) dosage and initial Cr(Ⅵ)/As(Ⅴ) ratio were examined in batch tests. The presence of arsenate reduced the removal efficiency of chromium by Fe(Ⅱ), while the presence of chromate significantly increased the removal efficiency of arsenate by Fe(Ⅱ) at pH 6-8, In the absence of arsenate, chromium removal by Fe(Ⅱ) increased to a maximum with increasing pH from 4 to 7 and then decreased with a further increase in pH. The increment in Fe(Ⅱ) dosage resulted in an improvement in chromium removal and the improvement was more remarkable under alkaline conditions than that under acidic conditions. Chromium removal by Fe(Ⅱ) was reduced to a larger extent under neutral and alkaline conditions than that under acidic conditions due to the presence of 10 μtmol/L arsenate. The presence of 20 μmol/L arsenate slightly improved chromium removal by Fe(Ⅱ) at pH 3.9-5,8, but had detrimental effects at pH 6.7-9.8. Arsenate removal was improved significantly at pH 4-9 due to the presence of 10μmol/L chromate at Fe(Ⅱ) dosages of 20-60 μmol/L. Elevating the chromate concentration from 10 to 20μmol/L resulted in a further improvement in arsenate removal at pH 4.0-4.6 when Fe(Ⅱ) was dosed at 30-60 μmol/L.
基金supported by the Brain Korea 21 of SafeSustainable Infrastructure Research Group,Seoul National University
文摘The removal of As(III) and As(V) from aqueous solution was investigated using waste cast iron, which is a byproduct of the iron casting process in foundries. Two types of waste cast iron were used in the experiment: grind precipitate dust (GPD) and cast iron shot (CIS). The X-ray diffraction analysis indicated the presence of Fe~ on GPD and CIS. Batch experiments were performed under different concentrations of As(III) and As(V) and at various initial pH levels. Results showed that waste cast iron was effective in the removal of arsenic. The adsorption isotherm study indicated that the Langmuir isotherm was better than the Freundlich isotherm at describing the experimental result. In the adsorption of both As(III) and As(V), the adsorption capacity of GPD was greater than CIS, mainly due to the fact that GPD had higher surface area and weight percent of Fe than CIS. Results also indicated the removal of As(III) and As(V) by GPD and CIS was influenced by the initial solution pH, generally decreasing with increasing pH from 3.0 to 10.5. In addition, both GPD and CIS were more effective at the removal of As(III) than As(V) under given experimental conditions. This study demonstrates that waste cast iron has potential as a reactive material to treat wastewater and groundwater containing arsenic.
文摘Arsenic is one of the most common inorganic contaminants in groundwater worldwide,mainly due to the release of naturally occurring arsenic from aquifer sediments(Amini et al.,2008;Li and Cai,2015;Rahman et al.,2015).Naturally occurring arsenic exists predominantly in arsenate and arsenite species in groundwater.
基金financially supported by the MINECO ministry of Spain (No. CTM2015–65414-C2–1-R)the Innovation Found for Competitiveness of the Chilean Economic Development Agency (CORFO, No. es 13CEI2–21839)+1 种基金the China scholarship council for the fellowship (No. 201708110179)funding support from the European Union’s Horizon 2020 research and innovation program under the Marie Sk?odowska-Curie grant agreement (No. 665919)。
文摘In this study, a commercial cube-shaped open-celled cellulose sponge adsorbent was modified by in-situ co-precipitation of superparamagnetic iron oxide nanoparticles(SPION) and used to remove As(V) from aqueous solutions. Fe K-edge X-ray absorption spectroscopy(XAS) and TEM identified maghemite as the main iron phase of the SPION nanoparticles with an average size 13 nm. Batch adsorption experiments at 800 mg/L showed a 63% increase of adsorption capacity when loading 2.6 wt.% mass fraction of SPION in the cube-sponge.Experimental determination of the adsorption thermodynamic parameters indicated that the As(V) adsorption on the composite material is a spontaneous and exothermic process.As K-edge XAS results confirmed that the adsorption enhancement on the composite can be attributed to the nanoparticles loaded. In addition, adsorbed As(V) did not get reduced to more toxic As(Ⅲ) and formed a binuclear corner-sharing complex with SPION. The advantageous cube-shape of the sponge-loaded SPION composite together with its high affinity and good adsorption capacity for As(V), good regeneration capability and the enhanceddiffusion attributed to its open-celled structure make this adsorbent a good candidate for industrial applications.