Experimental Alternative to the Determination of the Thermal Dependence of the Complex Modulus of Asphalt Mixes in Dry Tropical Areas

Current pavement design methods do not allow for the reduction of early deformation of the surface layers of bituminous pavements in the city of Ouagadougou. Weather conditions combined with traffic, particularly during heat waves, are factors. The temperature at the surface of the bituminous pavement can reach 62˚C but the complex modulus associated with this temperature is not taken into account in the design, hence the interest in proposing laws of dependence of the complex moduli is taken into account in the maximum temperatures of the pavement surface. The objective of this paper is to propose an experimental method to determine the temperature dependence of the complex moduli of asphalt mixes for temperatures between 40˚C and 70˚C. This experimental method consists of performing axial compression tests on cylindrical asphalt specimens. It was applied to three different formulas of bituminous mixes, intended for the wearing course, obtained from mixes of crushed granites, granular classes 6/10, 4/6 and 0/4, pure bitumens of grade 50/70, 35/50 and modified bitumen of grade 10/65. The comparative study of the experimental results obtained with the results of a semi-empirical methodology revealed a root mean square deviation from the mean of between 6.58% and 14.8% of the norms of the complex moduli (modulus of rigidity) of the asphalt mixes for a fixed frequency of solicitations of 10 Hz. The consistency of these results with data from the literature led to the initial conclusion that asphalt mixes formulated with 35/50 and 10/65 bitumen would have better compressive strength than those formulated with 50/70 bitumen, for exposure temperatures between 40˚C and 70˚C. This experimental approach could be an alternative to the complex modulus test for determining the modulus of rigidity for design purposes under real pavement exposure conditions in the city of Ouagadougou during heat waves.

Utilization of inferior quality aggregates in asphalt mixes:A systematic review

Properties of aggregates are majorly influenced by parameters of source rocks viz.,formation process,chemical composition,impurities,volume of pores,and grain size.The study presents a review of aggregate treatment methods and its efficacy to enhance the quality of aggregate.Various aspects of aggregate treatment methods like processing temperature,the dosage of additives,adaptability in the field is studied for three treatment methods viz.,polymer coating,cementitious coating,and chemical treatments.The paper also presents an insight to understand the effect of different treatment methods on mix properties and performance parameters of asphalt mixes.The review revealed that the shape properties of aggregates can be enhanced by the incorporating suitable crushing process(two-stage or three-stage).Whereas,physical and durability properties of aggregates can be improved by various treatment methods like polymer coating,Zycosoil treatment.It was further inferred from the review that treatment methods can have moderate effects on the mechanical properties of aggregates,since,it is mostly dependent on properties of source rocks.

Addressing the Fuel Resistance of Hot Mix Asphalt by an Enhanced Test Method

In areas where hot mix asphalt(HMA)is likely to be exposed by any form of mineral oil the layer has to withstand the attack of these substances in order not to damage the construction.The European Standard EN 12697-43 provides a test procedure to determine the resistance of HMA to fuel.The paper reviews this method thoroughly.A completely revised and simplified test device for the brush test was developed meeting the requirements of the standard and creating results with a high repeatability at the same time.The test conditions given by the standard such as the exposure to fuel,cleaning of the specimen after exposure or the contact pressure of the brush were varied to isolate those test conditions with a substantial influence on the result.The research revealed that in the standard some conditions with a rather small influence are set quite strictly while other conditions with a distinct influence on the result are not defined with the required accuracy to obtain comparable and repeatable results.The paper presents suggestions for the improvement of the test method and the standard itself in respect to the layout of the test device and the definition of important test conditions to enhance the outcome of the EN 12697-43.

Construction Technology of Warm Mix Asphalt Pavement in Cold High-Altitude Areas

With the continuous development of domestic highway construction,highway civil engineering and service level quality have attracted much attention.Good pavement quality and high-quality service make people feel comfortable and smooth when traveling.High-quality pavement can significantly reduce the probability of traffic accidents.At present,there is a direct relationship between pavement quality and pavement construction operations.Carrying out pavement construction operations in cold high-altitude areas requires a reasonable selection of construction equipment and methods.The application of warm-mix asphalt pavement construction technology can ensure pavement quality.Therefore,this paper analyzes the advantages of warm-mix technology,the environmental characteristics of cold high-altitude areas,and construction preparations,and discusses the construction technology of warm-mix asphalt pavement in cold high-altitude areas in detail,to improve the overall road quality of cold high-altitude areas.

Relationship between fatigue life of asphalt concrete and polypropylene/polyester fibers using artificial neural network and genetic algorithm

While various kinds of fibers are used to improve the hot mix asphalt(HMA) performance, a few works have been undertaken on the hybrid fiber-reinforced HMA. Therefore, the fatigue life of modified HMA samples using polypropylene and polyester fibers was evaluated and two models namely regression and artificial neural network(ANN) were used to predict the fatigue life based on the fibers parameters. As ANN contains many parameters such as the number of hidden layers which directly influence the prediction accuracy, genetic algorithm(GA) was used to solve optimization problem for ANN. Moreover, the trial and error method was used to optimize the GA parameters such as the population size. The comparison of the results obtained from regression and optimized ANN with GA shows that the two-hidden-layer ANN with two and five neurons in the first and second hidden layers, respectively, can predict the fatigue life of fiber-reinforced HMA with high accuracy(correlation coefficient of 0.96).

Reducing the Compaction Segregation of Hot Mix Asphalt

This paper presented the methods of reducing the compaction segregation of asphalt layer by improving the operating characteristics of roller and paver. The fit formula, which expresses the compaction rule of the paving layer after passing different rolling passes of the steel wheel roller, was also put forward. The measured results of test road show that when some technical methods are adopted, the compaction segregation can be controlled.

The Compaction Characteristics of Hot Mixed Asphalt Mixtures

The quality of compaction is important to the performance of hot mixed asphalt （HMA） pavement. Most premature failures of asphalt pavement are concerned with poor compaction. Compaction characteristic of lIMA mixtures were studied. Compaction tests were done with typical widely used HMA mixtures, including dense gradation asphalt mixtures with different nominal maximum aggregate size （AC13,AC20,AC25）, and mixtures with different gradation （AC13, SMA13,Supl3 and OGFC13）. HMA mixtures were sampled at different compaction temperature and Marshall blow numbers, varying between 60 and 175 ~C and between 15 and 75 lows, respectively. The compaction characteristics of these mixtures were evaluated. The results showed that the Marshall stability and volumetric properties were significantly affected by the compaction temperature. Mixtures with the same NMAS but different type of gradation need different compaction energy to get the designed density.

The Influence of Material Related Parameters on the Mechanical Properties of Foamed Asphalt Mix

By indirect tensile strength （ITS） test and unconfined compressive strength （UCS） test, the influence of various material related parameters, including asphalt foamability, aggregate temperature, mixing moisture content （MMC） and foamed asphalt （FA） content, on the mechanical properties of FA mixes was studied. The results indicated that both asphalt foamability and aggregate temperature greatly affected ITS of FA mixes. Too low aggregate temperature was unfavorable for mechanical properties of FA mixes. Foamed index alone was unfit for the evaluation of asphalt foamability. Compared with half-life, expansion ratio had more prominent influence on ITS of FA mixes. MMC had significant impact on the mechanical properties of FA mixes and should be optimized by trial and test in FA mix design. The mechanical properties of FA mix were sensitive to the change of FA content. Compared with the ITS determined with standard Marshall specimens, both the ITS and UCS determined with static compressed specimens by 15 cm diameter were more effective in terms of choosing the optimal asphalt content for FA mixes.

Experimental Study on Fatigue Performance of Gussasphalt Mixture

Four-point flexural fatigue test for Gussasphalt mixture specimen was carried out at a straincontrolled mode system. The results showed that the development of the tested stiffness modulus and phase angle of the mixtures with increasing load cycles exhibited three periods, initial generation, slow development and failure period. The fatigue crack generation zone formed in the third period, in which the macro mechanical properties were signifi cantly decreased. Moreover, we also analyzed the effects of asphalt content and mixing temperature on the fatigue life of the mixture. The results showed that the fi rst period when the specimen＇s initial stiffness modulus was reduced to 80% accounted for 5%-10% of the total fatigue life; the second period in which the reduction became slow and demonstrated a liner relationship with load cycles occupied 70%-85% of the fatigue life; and the third period was about 5%-10%. The results indicated that the lower the mixing temperature, the longer the fatigue life of Gussasphalt mixture. Besides, the increasing of asphalt content has a minor effect on the fatigue life of Gussasphalt mixture

Automated,economical,and environmentally-friendly asphalt mix design based on machine learning and multi-objective grey wolf optimization

The increasing impact of the greenhouse effect on ecosystems is prompting transportation agencies to seek methods for reducing CO_(2)emissions during pavement construction and maintenance.Additionally,the laboratory mix design process,which involves selecting aggregate gradation and binder content,is time-consuming and labor-intensive.To accelerate the traditional mix design procedure,this study presented a mix design procedure that can automatically determine gradation and binder content based on machine learning(ML)and a meta-heuristic algorithm.Specifically,ML approaches were employed to model the relationship between volumetric properties(mixture bulk specific gravity(Gmb)and air void(VV))and both mixture component properties and mixture proportion,based on a dataset collected from literature with 660 mixture designs.Integrated with the prediction of ML models and the modified multi-objective grey wolf optimization(MOGWO)algorithm,an automatic asphalt mix design was proposed to pursue three goals,including VV,cost,and CO_(2)emission.The results indicated that least squares support vector regression(LSSVR)and e Xtreme gradient boosting(XGBoost)achieved the highest prediction accuracies(correlation coefficient:0.92 for VV and 0.96 for Gmb).The MOGWO algorithm successfully found the 26 optimal mix designs for the case of VV vs.cost vs.CO_(2)emission.Compared to the traditional laboratory design,the optimal mixture with VV of4%achieves a cost saving of 2.46%and a reduction of 4.03%in carbon emission.The volumetric properties of the mixtures output by the approach also align closely with values measured in a laboratory.

Mechanical performance of cold mix asphalt containing cup lump rubber as a sustainable bio-modifier

The road construction industry aims to contribute to the protection of already compromised environment.Cold mix asphalt(CMA)is a measure initiated by the road industry to protect the environment and preserve energy.Despite having additional benefits,CMA has attracted little attention due to its inferior performance.CMA's performance is enhanced using a sustainable binder bio-modifier,natural cup lump rubber(CLR)is one of them.This study evaluated the tensile properties,rutting,moisture susceptibility,and adhesion properties of CLR-modified CMA(CMA-CR).The tensile property was enhanced by 26%due to CLR modification.CMA-CR had excellent rutting resistance of less than 2 mm rut depth at 10,000 load cycles,showing 70%improvement compared with conventional CMA.Moisture susceptibility evaluation indicated that CMA-CR had tensile strength ratio(TSR)value of 104%,satisfying the minimum 80%requirement of AASHTO T283.It also retained more than 96%bitumen coating.The moisture damage resistance was improved by 12%and 10%in terms of TSR and stripping,respectively.The durability results revealed that the CMA-CR mixture prevented higher mass loss,representing 14%improvement compared with conventional CMA.

Investigation of material composition,design,and performance of open-graded asphalt mixtures for semi-flexible pavement:A comprehensive experimental study

The primary goal of this study is the design and construction of semi-flexible pavement(SFP)mixture in accordance with the engineering and mechanical criteria.This study involves the use of a range of gradation curves,air void contents,cellulose and synthesized fibers,and neat and modified asphalt binders to prepare the open-graded asphalt(OGA)mixtures.To analyze the characteristics of these mixtures,a variety of test,namely binder drainage,semi-circular bending(SCB),Cantabro,wheel tracking,indirect tensile strength(ITS),and permeability tests were conducted.Additionally,to analyze the prepared grouting material,flexural strength,compressive strength,and fluidity tests were conducted.In the final stage,SFP was compared to HMA in terms of engineering characteristics and performance.According to the results,SFP was more resistant to skid,rutting,fire,and moisture damage,while HMA had a better performance in fracture tests,including SCB test.According to the results of the mechanical performance tests conducted on OGA mixtures,the highest and lowest values for air void content to achieve the highest mechanical performance level were 30%-35%and 25%,respectively.Also,based on the laboratory results,it was determined that the required void ratio for constructing OGA mixtures was 24%-26%based on the bitumen type and fibers amount in the mixture.Finally,SFP mixture can be regarded as a viable alternative to common pavements thanks to its high resistance to rutting and moisture damage,long freezing-thawing fatigue life,and adequate fire and skid resistance.

Influence of the Temperature on Coated Bituminous of Road Structures in Senegal (West Africa)

The Senegalese road network is strongly influenced in the long term by seasonal variations in climate and weather conditions. Indeed, much of the damage is due to these environmental factors. The objective of this paper is to study the behaviour of bituminous structures under the effect of high temperatures. Material samples were taken for a physico-mechanical characterization of the coated components. The results show that Marshall creep (2.87, 3.39, 5, 5.5 mm) and the bitumen penetrability increase with the increasing of temperatures respectively from 34°C to 45°C and from 20°C to 50°C. Marshall Stability drops from 15.81 kN to 11.31 kN for temperatures between 34°C and 45°C. The simulation carried out on Alize-LCPC shows an increase in distortions of traction at the basis of the rolling layer and at the top of the platform if temperatures vary between 34°C and 45°C. This work makes it possible to conform that the bituminous concrete is thermally sensitive and the hypothesis of fixing the constant modulus of the bituminous layers in Senegal for all projects remains unsuitable for a good dimensioning of sustainable road structures. The knowledge of the equivalent regional temperature will make it possible to produce quality pavements with a long lifespan.

Estimation of the Equivalent Design Temperature of a Pavement in Burkina Faso

The bituminous pavements of the city of Ouagadougou(Burkina Faso)are made using old design methods which take into account the climate from the notion of equivalent temperature.Thus an equivalent temperature of 30°C is often used for the design of bituminous pavements.The observation that has been made is that this temperature does not currently make it possible to reduce the problems of early degradation of the pavements linked to meteorological fluctuations.The objective of this article is to propose a numerical approach for determining the equivalent temperature from temperature measurements taken at the surface of the pavement.This approach consists in jointly using the Alizé-Lcpc sizing software and the Comsol Multiphysics software using the finite element method.For a four-layer bituminous pavement,located at 12.38°North and 1.48°West,in Ouagadougou,consisting of a surface course of bituminous concrete of 8 cm and a base course of gravel bitumen of 16 cm,an equivalent temperature of 35°C was obtained.

Air pollutant emissions from the asphalt industry in Beijing,China

Improving our understanding of air pollutant emissions fromthe asphalt industry is critical for the development and implementation of pollution control policies.In this study,the spatial distribution of potential maximum emissions of volatile organic compounds(VOCs)in the complete life cycle of asphaltmixtures,as well as the particulate matter(PM),asphalt fume,nonmethane hydrocarbons(NMHCs),VOCs,and benzoapyrene(BaP)emissions from typical processes(e.g.,asphalt and concrete mixing stations,asphalt heating boilers,and asphalt storage tanks)in asphalt mixing plants,were determined in Beijing in 2017.The results indicated that the potential maximum emissions of VOCs in the complete life cycle of asphalt mixtures were 18,001 ton,with a large contribution from the districts of Daxing,Changping,and Tongzhou.The total emissions of PM,asphalt fume,NMHC,VOCs,and BaP from asphalt mixing plants were 3.1,12.6,3.1,23.5,and 1.9×10^(−3)ton,respectively.The emissions of PMfromasphalt and concretemixing stations contributed themost to the total emissions.The asphalt storage tankwas the dominant emission source of VOCs,accounting for 96.1%of the total VOCs emissions in asphalt mixing plants,followed by asphalt heating boilers.The districts of Daxing,Changping,and Shunyi were the dominant regions for the emissions of PM,asphalt fume,NMHC,and BaP,while the districts of Shunyi,Tongzhou,and Changping contributed the most emissions of VOCs.

Caltrans use of scrap tires in asphalt rubber products:a comprehensive review

The California Department of Transportation （Caltrans） has been using scrap tire rubber in asphalt pavements since the 1970s in chip seals and the 1980s in rubberized hot mix asphalt（RHMA）. Both the wet （field blend） and dry processes were used in early trials. Caltrans has also used rubber modified binders containing both crumb rubber modifier and polymer modifier that could be manufactured at a refinery facility, a terminal blend wet process. Since the beginning of this century, Caltrans increased the use of scrap tire rubber in paving projects and invested considerable resources in developing technically sound, cost effective, and environmentally friendly strategies for using scrap tire rubber in roadway applications. By the end of year 2010, approximately 31% of all hot mix asphalt （HMA） placed by Caltrans was rubberized HMA, roughly 1.2 million tons. Caltrans efforts in using asphalt rubber products were also demonstrated in its research and technology development. These included the construction of two full-scale field experiments, five warranty projects, and an accelerated pavement study using a heavy vehicle simulator. Additionally, terminal blend asphalt rubber and rubberized warm mix asphalts began to be experimented on trial basis. This paper provides a comprehensive review of Caltrans experience over four decades with asphalt rubber products. Current practices and future outlook are also discussed.

Development of high stability hot mix asphalt concrete with hybrid binder

Cost reduction of public works projects has been desired due to severe financial circumstances. Therefore, asphalt pavement has been requested to extend its life. Semi-flexible pavement or epoxy asphalt pavement, which has high rutting resistance and oil resistance, may be applied to the place where these performances are demanded. However, special technique is required in manufacturing and construction. In addition, these materials have also raised a problem that they cannot be recycled. Meanwhile, conventional asphalt pavement has several drawbacks. It is vulnerable to rutting caused by traffic load and damage caused by petroleum oils such as gasoline or motor oil. The materials used in asphalt mixtures were studied for improving the durability of asphalt mixture. A high stability asphalt concrete was developed which has equal or superior performance to semi-flexible pavement and epoxy asphalt pavement. In this paper, the process of selecting the substance and the characteristics evaluation of the developed mixtures are described. Furthermore, an inspection result as well as follow- up survey of the performance of the developed mixtures obtained from trial and actual construction is shown.

Graphene sandwiched crumb rubber dispersed hot mix asphalt

The crumb rubber obtained from discarded vehicle tires and graphene oxide prepared by oxidation of graphite powder in laboratory were used to modify virgin bitumen. Four different hot mix asphalt matrices prepared using virgin bitumen, crumb rubber modified bitumen, graphene oxide modified bitumen and combination of crumb rubber-graphene oxide modified bitumen are compared. The modified bitumen matrices are characterised by Fourier transform infrared spectroscopy and scanning electron microscopy for structural and morphological analysis. Marshall properties along with indirect tensile test and tensile strength ratio tests were carried out to check the resistance towards cracking and moisture susceptibility of matrices. The results show that, crumb rubber and graphene oxide are completely compatible with bitumen. 9.8% crumb rubber content in crumb rubber modified bitumen hot mix asphalt exhibits the optimum result. The performance of graphene oxide modified bitumen hot mix asphalt exhibits superior performance in comparison to control mix and crumb rubber modified bitumen hot mix asphalt samples.The enhanced properties of modified bitumen hot mix asphalt with the combining effect of graphene oxide and crumb rubber, are suitable for road construction.

Thermal segregation of asphalt material in road repair

This paper presents results from a field study of asphaltic pavement patching operations performed by three different contractors working in a total of ten sites. It forms part of an ongoing research programme towards improving the performance of pothole repairs. Thermal imaging technology was used to record temperatures of the patching material throughout the entire exercise, from the stage of material collection, through transportation to repair site, patch forming, and compaction. Practical complications occurring during patch repairs were also identified. It was found that depending on the weather conditions, duration of the travel and poor insulation of the transported hot asphalt mix, its temperature can drop as high as 116.6 ℃ over the period that the reinstatement team travel to the site and prepare the patch. This impacting is on the durability and perfor- mance of the executed repairs. Cold spots on the asphalt mat and temperature differentials between the new hot-fill asphalt mix and existing pavement were also identified as poorly compacted areas that were prone to premature failure. For example, over the five-minute period, the temperature at one point reduced by 33% whereas the temperatures of nearby areas decreased by 65% and 71%. A return visit to the repair sites, three months later, revealed that locations where thermal segregation was noted, during the patching opera- tion, had failed prematurely.

Mix design,development,production and policies of recycled hot mix asphalt:A review

Worldwide,flexible pavements are the paramount type of pavements.These national assets can be recycled to serve the next design life without the need to dispose of them in landfill.The old/distressed,flexible pavement material is called,reclaimed asphalt pavement(RAP)material.In view of the sustainable development practice,100%RAP should be recycled.However,the practical range of RAP incorporation in a drum mix plant ranges from 10%to 50%whereas in a batch mix plant,it is 10%-35%.In a batch mix plant,incorporation of the hot dried RAP(instead of cold RAP feeding)can increase the RAP incorporation level by 20%.Studies recommended that the rejuvenator should be added over the RAP material instead adding with the base binder.The addition of rejuvenator on the RAP conveyor belt(to the pug mill),provided sufficient time for rejuvenating the aged binder coating over RAP aggregates.Further,a thorough knowledge of the mix design process of recycled hot mix asphalt(RAP-HMA)is essential to produce a durable mix.For high RAP content(>20%),the RAP binder properties are important for the mix design process.However,very limited studies discussed(in detail)the recovery process of the RAP binder.The review article through light on the binder recovery process,method of RAP gradation,specific gravity determination for RAP material,minimum desirable properties of the RAP material etc.This review paper also provides a narrative review of the historical development of RAP-HMA technology,technical aspects related to the procurement of RAP material,mix design and production of the recycled mix.Moreover,the international&national policies/laws for construction and demolition waste are discussed.